Interior Work at Cheruvathur Branch

Amount

INTERIOR FURNISHING WORKS : TELLER DESK

Providing and fixing Teller desk finished with 19mm thick plywood for table top & side verticals, 12mm for front apron and 1.0mm thick laminate for outer surface & 0.7mm for inside area. The table top finished with 15mm thick white glossy tile slab with edge polish as per architect choice. The table shall have in built pedestal storage with locking system (1No. drawer & 1No.shutter) and keyboard tray. The cost included making thickness, front apron design and fixing necessary hardware etc., complete as per design. (Size : 11'3'' X 2'6" X 2'6" Ht.)

BI-LEVEL CASH COUNTER

Providing and fixing Bi-level cash counter table finished with with 19mm thick plywood for table top & side verticals, 12mm for front apron and 1.0mm thick laminate for outer surface & 0.7mm for inside area. The table top finished with 15mm thick white glossy tile slab with edge polish as per architect choice. The table shall have in built pedestal storage with locking system (4Nos. drawer) and keyboard tray. The cost included making thickness, front apron design and fixing necessary hardware etc., complete as per design. (Size : 4'6'' X 2'6" X 3'6" Ht.)

BACK OFFICER TABLE

Providing and fixing Back Officer table finished with 19mm thick plywood for table top & side verticals, 12mm for front apron and 1.0mm thick laminate for outer surface & 0.7mm for inside area. The table top finished with 15mm thick white glossy tile slab with edge polish as per architect choice. The table shall have in built pedestal storage with locking system (1No. drawer & 1No. shutter) and keyboard tray. The cost included making thickness, front apron design and fixing necessary hardware etc., complete as per design. (Size : 4'6'' X 2'6" X 2'6" Ht.)

BM CABIN TABLE

Providing and fixing BM Cabin table finished with 19mm thick plywood for table top & side verticals, 12mm for front apron and 1.0 mm thick laminate for outer surface & 0.7mm for inside area. The table top finished with 15mm thick white glossy tile slab with edge polish as per architect choice. The table shall have in built pedestal storage with locking system (4Nos. drawer) and keyboard tray. The cost included making thickness, front apron design and fixing necessary hardware etc., complete as per design.(Size : 6'0'' X 2'6" X 2'6" Ht.)

CHEQUE WRITING DESK

Providing and fixing BM Cabin table finished with 19mm thick plywood for table top & side verticals, 12mm for front apron and 1.0mm thick laminate for outer surface & 0.7mm for inside area. The table shall have in built pedestal storage with locking system (4Nos. drawer) and keyboard tray. The cost included making thickness, front apron design and fixing necessary hardware etc., complete as per design. (Size : 4'0'' X 1'6" X 3'6" Ht.)

PANTRY TABLE

Providing and fixing Pantry table finished with 19mm thick plywood for table top & side verticals, and 1.0mm thick laminate for outer surface & 0.7mm for inside area complete as per design. (Size : 13'10'' X 1'6" X 2'6" Ht.)

STORAGE FOR BACK OFFICER, BM CABIN & PANTRY AREAProviding and fixing Side storage unit finished with 19mm thick plywood for storage top, side verticals & shelves, 6mm for back and 1.0mm thick laminate for outer surface & 0.7 mm for inside area. The storage shall have openable shutters with locking system, adjustable/ fixed shelves, fixing necessary hardware etc., complete as per design.

(Size : 2'9'' X 1'4" X 2'6" Ht.) X 2 Nos. for Back office area.

(Size : 3'3'' X 1'4" X 2'6" Ht.) X 1 No. for BM side storage.

(Size : 8'3'' X 1'4" X 2'6" Ht.) X 1 No. for BM Back side storage.

(Size : 14'0'' X 1'6" X 7'0" Ht.) X 1 No. for b/w Visitors & Pantry room.

WOODEN PARTITION

Providing and fixing Wooden partition finished with 2" X 2" frame works with 19mm thick plywood & 6mm plywood for side, 1mm thick laminate finish and fully / partly glazed (8 mm/10 mm thick glass) as per design. The cost included fixing necessary hardware etc., complete as per design.

DOORS

Providing and fixing 12mm thick toughened glass door with fixtures. The cost included floor spring, handles and fixing necessary hardwares etc., complete as per design. (Size : 3'6'' X 7'0" Ht.)

Providing and fixing 30mm thick marine grade flush door fully opaque / semi glazed door with fixtures. The cost included door jambs, vision panel, handles, mortise lock, door close, fixing necessary hardwares etc., complete as per design.

(Size : 3'0'' X 7'0" Ht.) for BM Cabin & Visitors / Pantry area.

(Size : 2'9'' X 7'0" Ht.) for BM Cabin.

WALL PANELLING

Providing and fixing wall panelling finished with 12mm thick plywood and 1.0 mm thick laminate necessary hardwares etc., as per design.

ALUMINIUM PARTITION

Providing and fixing Aluminium partition wall (12mm Prelaminated board, 6mm glass) with extruded built up standard tubular sections appropriate z sections and other sections of approved make conforming to IS: 733 and IS:1285. Fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie, at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angel, aluminium snap beading for glazing paneling, C.P brass/stainless steel screws, including the cost of vinyl stickers (architect's choice) all cost of materials, hardwares, conveyance and labour charges etc., complete as per design. (Size : 8'0'' X 8'0") for Strong room.

Providing and fixing fully opaque Aluminium door. The cost included door closer, fixing necessary hardwares etc., complete as per design. (Size : 3'0'' X 7'0")

WRITING & PIN-UP BOARD

Providing and fixing white glossy finish writing board as per design (Size : 3'6'' X 1'0" Ht.)

Providing and fixing Pin-up board finished with 12mm thick soft board covered with fabric including necessary hardware etc., as per design. (Size : 3'6'' X 1'0" Ht.)

NOTICE BOARD

Providing and fixing Notice / Pin-up board finished with 12mm thick soft board covered with fabric including necessary hardware etc., as per design. (Size : 3'0'' X 3'0" Ht.)

LETTER BOX

Providing and fixing Letter box finished with 16mm thick plywood and 1.0mm thick laminate, necessary hardware etc., as per design. (Size : 1'3'' X 0'5" X 1'3" Ht.)

GYPSUM FALSE CEILING

Providing and fixing false ceiling with 12.5mm thick gypsum board and 16 gauge galvanized iron channels, (Ceiling channels MF.5, .80mm,x26mmx5mm @457mm c/c and intermediate channels MF .7A, 15mmx45mm, 9mm@1220mm c/c and perimeter channels MF. 6A, 20mmx26mm along wall and strap hanger-MF.8), using joint tap and joint compound. The cost included cut-outs for light fitures as per design.

Providing and fixing gypsum cove for indirect lighting as per design for Visitors and BM cabin area.

PAINTING WORKS: Providing and applying one coat cement primer two coat putty and two coat plastic emulsion paint to walls & ceiling including all cost of materials, conveyance and labour charges etc.,complete as per design.

Wall painting (For workstation area)

Ceiling painting (For workstation area)

Providing and applying plastic emulsion paint without putty finish (For strong room, pantry and toilete area)

Providing and applying enamel paint for window grill and rolling shutter

WINDOW BLINDS

Providing and fixing vertical blinds with best quality made from 100% polyester yarn coated with fade resistant polymer to ensure complete opaquity with zero light transmittance having suitable coating on exterior, including all fixtures and fittings complete in all respect as per design.

Cabling : Supply and laying of LT XLPE insulated, extruded, filled with moisture absorbent filler, tightly wounded, AL stranded conductor armoured cable, for working voltage up to 1100V, freely clamped on cable tray/wall or through trench, neatly dressed as required. Brand:KEI,Havells

4C X 25 Sqmm Al. Ar. Cable

4C X 16 Sqmm Al. Ar. Cable

4C X 10 Sqmm Al.Ar. Cable

END TERMINATION: Supply and fixing cable glands for different cables mentioned below using single compression brass cable gland, compression type aluminium crimping lugs, gland earthing of adequate size, etc. complete

4C X 25 Sqmm Al. Ar. Cable

4C X 16 Sqmm Al. Ar. Cable

4C X 10 Sqmm Al.Ar. Cable

EARTHING : Supply and installation of earthing station as per the general specification and IS : 3043/87 Pipe earth station Supply and Labour charges for providing efficient pipe earth stations using 40 mm dia 2.5 m long GI pipe electrode, filling salt sand and charcoal, construction of earth chamber and covering with heavy duty cast iron cover hinged to cast iron frame, including excavation of earth pit.

EARTH GRIDS: Supply and labour charges for lying in ground/ clamping on tray/wall & giving terminations with necessary cu sockets, brass nuts & bolts for the following copper/strip wires for effective earthing of earth pits, panels, generator, DBs and other equipments

25 x 3 mm cu strip

No.10swg Cu

DISTRIBUTION BOARD (Brand : Legrand, Schneider)

AC / RAWPOWER DB: Supply, Installation, testing & commissioning of 3 Phase 4 way Horizontal TPN DB with 40A 30mA 4P RCBO as incomer and 12Nos 6A/10A SP 'C' curve MCBs out goings with all necessary accessories like Neutral link, Earth link etc. (Ferruling shall be done in all circuits for proper identifications.

LIGHTING DB: Supply, Installation, testing & commissioning of 1 Phase 8 way SPN DB with 32A 30mA DP ELCB as incomer and 6Nos 6A/10A SP 'C' curve MCBs out going with all necessary accessories like Neutral link, Earth link etc. (Ferruling shall be done in all circuits for proper identifications.

UPS DB: Supply, Installation, testing & commissioning of 1 Phase 12 way SPN DB with 32A DP MCB as incomer and 8Nos 6A/16A SP 'D' curve MCBs out going with all necessary accessories like Neutral link, Earth link etc. (Ferruling shall be done in all circuits for proper identifications.

MAIN DB (EXISTING DB)

Removing existing 3 Phase Vertical DB and refixing to the proposed electrical room. The cost included for termination and labour charges etc., complete.

POINT WIRING : Supply and labour charges for Wiring of light points including exhaust fan with 2 runs of 1.5 Sq.mm FRLS pvc Cu. Wire with same wire as earth through 20mm medium PVC conduit with metal box, modular switches, plates and all accessories up to a length of 6 meters.

Single light point (Up to 6 Mtr.)

Two light point (Up to 8 Mtr.)

Three light point (Up to 10 Mtr.)

Four light point (Up to 12 Mtr.)

Supply and labour charges for Wiring of 2 WAY light points with 2 runs of 1 Sq.mm FRLS pvc Cu. Wire with same wire as earth through 20mm medium PVC conduit with metal box, modular switches, plates and all accessories up to a length of 6 meters.

Supply and labour charges for Wiring of 6A Independent sockets with 2 runs of 1.5 Sq.mm FRLS pvc Cu. Wire with same wire as earth through 20mm medium PVC conduit with all accessories up to a length of 6 meters.

Supply and labour charges for Wiring of fan points with step type regulator with 2 runs of 1 Sq.mm FRLS pvc Cu. Wire with same wire as earth through 20mm medium PVC conduit with metal box, modular switches, plates and all accessories up to a length of 6 meters.

SUPPLY AND LABOUR CHARGES FOR FIXING OF FOLLOWING ITEMS WITH SUITABLE ACCESSORIES (Brand : Legrand - Mylinc)

1No. 6A Socket controlled by 6A Switch

1No. 6A Socket controlled by 6A Switch (without back box)

2Nos. 6A Socket controlled by 16A Switch

2Nos. 6A Socket controlled by 16A Switch (without back box)

3Nos. 6A Socket controlled by 16A Switch

3Nos. 6A Socket controlled by 16A Switch (without back box)

1No. 16A Socket controlled by 16A Switch

32A SPN industrial socket

1No. RJ 11 Telephone Socket

1No. RJ 45 TV Socket

CIRCUIT WIRING

Supply and labour charges for Wiring of 2 runs of 1.5sq.mm pvc Cu wire with same wire as earth through 20mm medium PVC conduit with all accessories in open wall/concealed (Long light points)

Supply and labour charges for Wiring of 2 runs of 2.5sq.mm + 1 run 1.5sqmm pvc Cu wire through 20mm medium PVC conduit with all accessories in open wall/concealed (Lighting circuit)

Supply and labour charges for Wiring of 2 runs of 2.5sq.mm pvc Cu wire with same wire as earth through 20mm medium PVC conduit with all accessories in open wall/concealed (UPS circuit)

Supply and labour charges for Wiring of 2 runs of 4sq.mm + 1 run 2.5sqmm pvc Cu wire through 20mm medium PVC conduit with all accessories in open wall/concealed (AC/Rawpower circuit)

Supply and labour charges for Wiring of 2 runs of 6.5sq.mm + 1 run 2.5sqmm pvc Cu wire through 20mm medium PVC conduit with all accessories in open wall/concealed (Lighting/UPS DB)

ELV CABLES (Brand : Legrand)

Supply and laying of CAT-6 Cable (without conduit)

Supply and laying of 2 pair 0.5sq mm telephone cable (without conduit)

Supply and laying 20mm dia PVC conduit

Supply and laying 25mm dia PVC conduit

FITTINGS: Labour charges for fixing, testing and commissioning of following fixtures necessary accessories including cutting of false ceiling etc.

18W Surface Mounted LED Ceiling Lights (Make: Orient / Havell's)

Recessed 33W 2x2 Square Ceiling Lights (Wipro:Verge LM 29 451 XXX 2765)

15W Recessed LED Ceiling Lights (Make: Orient / Havell's)

Decorative Wall Lights (Philips)

1200mm/1400mm/900mm Ceiling Fan (Brand:Crompton)

Wall Fan (Brand: Crompton Normal Speed)

Exhaust Fan ((Brand : Crompton)

Mirror Lights (Wipro: Trim Neo LL20 620 XXX 65NE3*)

LED Strip Lights/Cove Lights with suitable driver (Make: Orient/ Havell's)

20W LED Tube Light (Make: Wipro / Orient / Havell's)

APPROVALS

Preperation of drawing, and getting all necessary approvals (initial/final), inspection etc from the electrical inspectorate, providing all paper work, HT agreement Preparation & assistance in availing power allocation from EB etc (including all miscellaneous / sundries except statutary charges)

EQUIPMENTS (Make : Bluestar / Voltas - Non Inverter AC)

Supply and installation of 1.0 Ton Split unit (For Branch Manager Cabin)

Supply and installation of 1.5 Ton Split unit (For Workstation area)

Supply and installation of 2.0 Ton Split unit (For Workstation area)

Supply and installation of 4kVA Stabilizer

Supply and installation of 5kVA Stabilizer

LOW SIDE WORKS

Supply and laying of Cu pipe from indoor unit to outdoor unit in concealed manner with rubber sleeve.

Supply and Laying of 3/4 " 10 gauge PVC pipe for drain in concealed manner

Supply and Laying of 4C x 2.5 flat cable from indoor to outdoor unit

Supply and installation of AC outdoor unit MS stand with suitable accessories

Labour for core cutting the beam/holes

KARTHAKKANDAKAM THARIQ

HARIDAS A A

SMARD

ARTCOLTD

Ashly Furnishing Co Pvt Ltd