MP FUND 2025-26

Supply , Erection and Commissioning of 16 M High Mast system complete hot dip galvanized and suitable for 45 Met /s wind Velocity and above. The High mast structure should have head frame ,winch set ,with steel wire rope of 4/6 MM dia,single drum and provided with galvanized lantern carriage suitable for 1x6 Nos of Luminaries and control panel board system with Automatic Hoisting arrangements and wiring etc; complete as per standard specification , as directed by the departmental officers.

Erection of the High Mast by providing 1:2:4 mix R.C.C foundation pedestal. The RCC pedestal projection should be 30cms above the ground level. The switch feeder box should also be mounted in RCC pedestal with projection of 30cms above the ground level suitable to the safe bearing capacity of the soil at 12T / sq.metre at 2.25m depth of below ground level and necessary galvanized foundation bolts, nuts ,washers and Anchor Plate, template etc; complete as per standard specification , as directed by the departmental officers.

Supply and fixing of 200W ( Flood Light Type) LED High mast Lighting system wattage 200W made of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP66. Separate compartment for LEDs & electronic driver with fittingsOperating Volage Range120 -270 ~ Rated Power 200W Current (A) @240V 0.880, Wattage (W) @ 240V - 200W , Power Factor >0.9 Current Harmonics (THD) <10% Operating Conditions Operating Frequency 50Hz Operating Temperature Range -20°C to +50°C Colour Temperature Cool White (5700+_300K) Luminous Flux >22000 Lumens package not less 100 - 110 lm/W Lumens Life Span > 50,000 Hours Approx,waight in (KG) 12.65kg : Body Alluminium Die casting Body Heat Sink Optimized thermal design to ensure maximum life to LED.Test certificate from NABL accredited lab for LM79 report. Protection of IP 65 Standards for Dust and Water including cost of interconnection wire and all labour charges etc; complete as per Standard Specification.as directed by the departmental officer.

Supply and laying of. U.G. cable: Supply and laying of 4core x 16 sqmm PVC armoured (Aluminium) L.T.U.G. cable in a trench to be excavated at a depth of 0.75meter putting 0.15mtr. layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. as per standard specification.

Supply and erection of 1 phase 14 gauge MS sheet steel enclosure EB Service box With 1No of 32A Fuse unit with 1No of 16A Double pole condactor and street light timer arrangement with sutable size of MS Angle frame with necessary interconnection arrangements etc complete,