SPECIAL REPAIRS TO BUILDING NO P 41 AND PROVISION OF NEW MAIN GATE AT DOLPHIN SPORTS GROUND INS VIRBAHU VISAKHAPATNAM

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed

M & L for 25 mm thick, PCC 1:2:4, Type B 1, using (20 mm graded aggregate) as in sub base of flooring complete all as specified and as directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square /rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed 15 mm thick in cm(1:6) complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square /rectangular) area of each tiles exceeding 0.18 sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed 15 mm thick in cm(1:6) complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for coloured Glazed designer ceramic tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm / 300 x 600 x 7 mm thick on vetical surfaces such as dados etc over 10 mm thick rendering in CM 1:3 as in backing coat for fixing tiles on vetical surfaces such as dados etc complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M & L for machine cut Kota stone slab 20 to 25 mm thick as in flooring laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed in cement mortar 1:6 20mm thick, complete all as specified and as directed.

M & L for machine cut Kota stone slab 20 to 25 mm thick in in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including backing coat in cement mortar 1:3, 10 mm thick, complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets complete all as specified and as directed.

M&L for GI frame work for seamless ceiling comprising of GI ultra perimeter channel 0.55 mm thick with two unequel flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate ultra channel 0.9mm thick having two equel flanges of 15mm each and web of 45mm suspended from soffit and approximate 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (n.exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre . Hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion holdfastners 12.5mm dia, 40mm long, including Gypsum Board 12mm thick in ceiling fixed with screw as pe manufacturers instructions finished with two coats of Plastic emulsion paint over one coat of primer over putty [ any number of coats] and sand papering to obtain smooth finish including taking down the existing old ceiling with frame complete all as specified and as directed. Make :(I) Make of Gypsum Board : M/s India Gypsum, M/s Saint Gobain (ii) Make of Putty : JK white cement / Birla wall care / Jenson & Nicholson

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of Plain Cement Concrete of any description and in any position not otherwise specifically provided for, and disposal off debris and rubbish to out side MD land complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75mm thick complete all as specified and as directed.

100 mm thick Cement concrete type B2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring / hard standing / plinth protection complete all as specified and as directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors including screed bed or bedding layer in cement mortar 1:4, 15 mm thick complete all as specified and as directed. Make : Bharat Tiles & Marble Pvt Ltd / National Tiles & Industries Pvt Ltd / Nitco Tiles Pvt Ltd / Nimco Tiles / Metro Tiles Bombay / Vitco Tiles Bombay / Mehtab Tiles

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to out side MD land complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:4 mixing with water proofing compound over 10mm thick on surfaces other than fair faces of brick work or on one side of lathing and finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item

Supply only Integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

M&L for rendering 5 mm thick on fair faces of concrete surfaces of ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered / untreated surfaces of internal walls, application of wall care putty (any number of coats required) and sand papering etc and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

Preparing old distempered surfaces of walls by washing rubbing down and stopping and applying one coat of distemper oil emulsion of any colour complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality)

Preparing old distempered surfaces of ceilings by washing rubbing down and stopping and applying one coat of distemper oil emulsion of any colour complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality)

M&L for Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment at points of contact of wood work by chemical emulsion [in oil or kerosene based solution] @ 0.5 litre per hole by drilling 6 mm dia holes at a downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and as directed.

M&L for removing the existing treatment from the roof, roughening the surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc in multistoreyed bldgs, Brushing neat cement slurry with 3.00 Kg of cement per sqm work, providing 25mm thck [Average thickness] PCC 1:2:4 type B1 [using 20mm graded aggregates], Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound @ 2% by weight of cement, Supply and Fix APP polymeric waterproofing membrane of 3 Kg / Sq.M incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bitumenous Primer @ 100 gms / Sqm, followed by a coat of blown bitumen of grade 85 / 25 or 90 / 15 @ 1.2 Kg / Sq.M each at top and bottom of the membrane followed by a coat of bitumenous aluminium primer @ 100 gms/sqm complete including sealing all joints by thermo fusion with minimum 10cm overlap all as per manufacturers instructions and removal of debris to out side MD land complete all as specified and as directed. Make of membrane : (i) M/S HYPERPLAS IWL CHENNAI, M/S MULTIPLAS BY STP TEXES LIMITTED, GOREGOAN, M/S STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS (ii) Note : Water proofing compound shall be measured and paid separately under relevant item as supply only.

M & L for cutting / chipping the spalling concrete surfaces of columns, beams, slabs, cantilevers, chajjas etc cleaning to receive plastering / guniting complete all as specified and directed from ground floor to upper floors including all necessary form work & scaffolding and safety measures and lowering down the demolished material for disposal and disposing the demolition material out side MD land complete all as specified and directed

M & L for Providing pressure guniting on existing pealed concrete surfaces 40 mm thick average in cement mortar 1:3 for soffits of slabs, Chajjas etc. and applying Epoxy Treatment [Nito Bond AR of M/s. Fosroc / suitable chemical in M/s. Dr. Fixit / Araldite/piditop] prior to guniting to facilitate proper bonding with old surfaces complete all as specified and as directed. Note : The rate quoted shall be deemed to be inclusive of necessary steel scaffolding and removal of the same after completion of work.

M & L for Providing pressure guniting on existing pealed concrete surfaces 30 mm thick average in cement mortar 1:3 for soffits of slabs, Chajjas etc. and applying Epoxy Treatment [Nito Bond AR of M/s. Fosroc / suitable chemical in M/s. Dr. Fixit / Araldite/piditop] prior to guniting to facilitate proper bonding with old surfaces complete all as specified and as directed. Note : The rate quoted shall be deemed to be inclusive of necessary steel scaffolding and removal of the same after completion of work.

M & L for Providing pressure guniting on existing pealed concrete surfaces 20 mm thick average in cement mortar 1:3 for soffits of slabs, Chajjas etc. and applying Epoxy Treatment [Nito Bond AR of M/s. Fosroc / suitable chemical in M/s. Dr. Fixit / Araldite/piditop] prior to guniting to facilitate proper bonding with old surfaces complete all as specified and as directed. Note : The rate quoted shall be deemed to be inclusive of necessary steel scaffolding and removal of the same after completion of work.

M & L for filling polymer modified non shrinking slurry for sunken floors for toilets by drilling holes at 1M interval to a depth of 60 mmx20mm dia and applying 2 mm thick brush bond over the concrete surfaceby mixing acrylic emulsion NITO BOND BB 4 Ltr with brush bond powder 23 kgs and water 4 ltr slurry all as per technical specification and as required complete work in sunken floors including testing complete all as specified and directed.

M & L 40mm thick (average) Plain Cement Concrete 1:2:4 type B1 using 20 mm graded aggregate mixed with WPC as in sunken floors complete all as specified and as direced.

Cutting holes through brick work/RCC into or through cement concrete slabs, chajjas, etc. reinforced or otherwise not exceeding 100 Sqcm and making good in cement mortar 1:3 of RCC 1:2:4 Type B1 as required complete all as specified and as directed.

S&F UPVC Pipes 50mm bore with pressure rating 10 Kg/sqm fixed to walls ceilings and floors complete all as specified and as directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing water proofing compound where required work upto 4th floor complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:3 on concrete surfaces including finishes even and smooth with out using extra cement complete all as specified and as directed.

M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete as filling in sunken floors complete all as directed and is specified.

Taking down Chowkats or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Supply anf Fix in opening Factory made solid PVC door frame of size 100 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed. Note for Item No. 43 & 44 : Make of PVC frame / shutter / ventilator shall be of make : Sintex / Nandi / Rajshri Plasti Wood.

M&L for cutting holes in brick walls in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 and making good the surface as per existing surface finishing as required complete all as specified and as directed.

S&F 100 mm long [ ISI marked ] medium weight, cold rolled mild steel butt hinges complete all as specified and as directed.

S & F [ISI marked] 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F [ISI marked] 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removing to store complete all as specified and as directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade (ISI Marked) for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors / trenches and testing complete all as specified and as directed. Make : Prakash / Tata / Zenith / Jindal

Refixing old GI steel tubing 15 mm bore with new connections in new or old position (walls, ceilings, floors etc.) complete all as specified and as directed

S & F in repairs 15 mm bore chromium plated bib tap of fancy type, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down the existing fitting complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F in repairs Two way bibtap 15mm dia with wall flange suitable for fixing health faucet including taking down existing bib tap complete all as per manufacturer's instructions and as required at site complete all as specified and as directed Make : M/s Hindware / Orient / Seiko / Dripless

Supply and Fix brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed.

S&F PVC body cabinet box mirror of size 350mm x 450mm x 100mm in PTMT alloy of approved pattern and design complete all as specified and as directed. Make : PRAYAG, CAT No - 551.

M & L for cutting chases, pinning in, making good the facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels etc, cutting n.exc. 10cm girth in stone, concrete block or concrete slab for concealling the water supply pipes complete all as specified and as directed

S & F in repairs Vitreous Ware wash down water closet (Pedestal), white (ETWC) with cover and Mild steel chromium plated hinging device, 'P' or 'S' Trap complete all as specified and as directed. Make of WC :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

Supply and Fix in repairs [ ISI MARKED ]10 litres capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, Ballvalve , Float Valve and handle including brackets complete all as specified and as directed Make : SLIMLINE from PARRYWARE / HINDWARE / CERA

S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and as directed.

Supply & fixed in repair Toilet paper holder, chromuim plated, box type, fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand including pedestal complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F in repairs Fancy type chromium plated 15 mm bore Stop valves, with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F PVC (SWR) pipe [ ISI MARKED ] 110mm bore single socketed with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Finolex

S&F PVC (SWR) pipe [ ISI MARKED ] 110mm bore single socketed with rubber ring joints laid in floors, trenches complete all as specified and as directed. Make : Supreme / Prince / Finolex

S&F PVC (SWR) pipe [ ISI MARKED ] 75 mm bore single socketed with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince / Finolex

S&F PVC (SWR) pipe [ ISI MARKED ] 75 mm bore single socketed with rubber ring joints laid in floors, trenches complete all as specified and as directed. Make : Supreme / Prince / Finolex

S & F 110 mm bore PVC ( SWR ) , bends of any radius complete all as specified and as directed. Make : Supreme / Prince / Finolex

S & F 75 mm bore PVC ( SWR ) , bends of any radius complete all as specified and as directed. Make : Supreme / Prince / Finolex

S&F stainless steel gratings for fixing 100mm dia outlet nahani including fixing with white/colour cement complete all as specified and as directed.

Dismantling of water tanks exceeding 500 litres and not exceeding 1000 litres capacity complete all as specified and as directed.

S&F 1000 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I and 20mm dia Ball Valves of PTMT, high pressure, with polythene float and fly nut complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S & F in repairs 15 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S & F in repairs 15 mm bore , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball of minimum weight 210 grams, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps fancy type, Swan neck cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. M/s Hindware / Orient / Seiko / Dripless

Taking down chowkats or frames exceeding 1.5 sqm but not exceeding 4sqm each with shutters without taking off shutters from frame complete all as specified and as directed.

Resecuring (or) easing and adjusting without taking down shutters of any description exceeding 1sqm but not exceeding 2 sqm each complete all as specified and as directed.

S&F Factory Made second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 35 mm thick, Factory Made Second Class Hard Wood, Kiln Seasoned and chemically pressure treated plain framed, panelled shutter [any number of panels] with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and as directed.

S & F 35 mm thick Factory Made Second class hard wood Glazed and skeleton shutters [without sash bars], open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

Taking down aluminium doors / Window shutters / ventilators of any size carrying out minor repairs / adjacement including replacement of rubber beading, aluminium beads, cleats of as required size and refixing in same position complete all as specified and directed.

Supply and fix anodised aluminium frame for window/ventillator with one or more rebates, anodised aluminium window, sliding type shutters, sliding on two way aluminium channel, without sash bars, sliding on separate track, made out of aluminium section weighing not less than 0.55 Kg/RM and necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, fittings such as suitable anodised aluminium locking type handle etc and fixing of 4.00 mm thick tinted glass complete all as specified and directed. Make for aluminium sections: HINDALCO / INDALCO/JINDAL Make of glass: Saint Gobain / Modi Guard / Asahi

S&F aluminium anodized door frame made out of aluminium section 65 x38 mm with anodized aluminium push/pull glazed type shutters with lock rail 80 x45 mm for stile 80 x 45 mm for top rail and 115 x 45 mm for bottom rail and necessary jointing cleats glazing clips, rubber packing, anodized aluminium snap beading, screws lock, including supply and fixing 5.5 mm thick tinted glass, handles, tower bolts, lock etc and all necessary fittings complete all as specified and directed. Make for aluminium sections: HINDALCO / INDALCO/JINDAL Make of glass: Saint Gobain / Modi Guard / Asahi

S&F aluminium poweder coted grill of make " Deco grill" and DG-202 model with aperture of size 60x40mm, suitable 'F' or 'E' section fixed to window frame for securing Deco grill and interlock and secruing the frames / masonry wall with brass screws complete all as specified and directed. Make : HINDALCO / INDALCO/JINDAL

S & F in repairs door clooser Aluminium extrude section body hydraulically regulated , designation No.2 , universal type , suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed. Make : Godrej / Everite / Priya

S&F for 300 mm MS ordinary rat tail rod pattern springs and including roller and roller plate complete fixed in repairs complete all as specified and as directed.

S & F 100 mm, 4 Levers, Brass Mortice Lock, vertical Type of Godrej make complete all as specified and as directed.

Supply and fix [ ISI marked ]100mm size hasp and staple, safety type, aluminum anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Cutting openings through walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified and as directed.

Forming jambsetc, to openings, including cutting, toothing and properly bonding into old work, also facing, joining and pointing to match existing work complete new work built in cement mortar 1:4 complete all as specified and directed.

Making good under cills (or over arches, lintels and bressummers) includding all pinning as necessary new work properly bonding into old work, also facing, joining and pointing to match existing work complete new work built in cement mortar 1:4 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description including doors, gates but excluding framed truss etc not otherwise provided for complete all as specified and as directed.

S&F in repairs 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete gear operated type with bevel gear box and crank handle , including S&F Safety lever locks mild steel with 4 leavers for rolling shutters and make it good adjustable for smooth functioning of rolliing shutter complete all as specified and as directed.

M& L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

M & L for Stainless steel work as in hand rails, ladder, grill, posts and similar work conforming to grade SS-304 including welding, buffing and necessary fixing arrangements like stainless steel bolts, etc complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match as in steps, jambs, pillars, window- cills, cooking platforms and like including and over screed bed or bedding layer / backing coat in cement mortar 1:4, 15 mm thick with shade of granite complete all as specified and as directed.

M & L for prepolished Granite (of any type) work 16 mm to 18 mm thick machine cut (table rubbed and polished) in skirting / dado and the like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over backing coat in cement mortar 1:4, 10 mm thick and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone complete all as specified and as directed.

Supply and fixing of bold metallic stainless steel letters and alphabets made with SS plain sheet made out of 22 guage thick and 304 grade SS plain sheet of suitable width not less than 50mm and depth/thick not less than 20mm based on height of letter (hollow section made to shape by using computerised cutting), the height of letter/ alphabet shall not be less than 15" in hindi and english languages and fixed on ganite wall cladding/ tiled finished walls, elevated from the surface complete all as specified and as directed

M&L for PCC 1:3:6 Type C2 ( using 40mm graded aggregates) as in bed concrete for foundation etc complete all as specified and as directed.(for drain/ culvert foundations).

M&L for providing PCC type B-0, 1:2:4 (using 12.5 mm graded granite stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of Cement Based paint over a coat of primer complete all as specified and as directed. Make : Super-Snocem / Durocem / Aquacem

S&F mild steel hand rails, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work for grills and gratings conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M & L for PCC 1:2:4, Type B-1 [using 20 mm graded granite stone aggregate] in surface channels and drains including forming fair finished drain or channel using extra cement including forms, moulds, mitred / stepped ends complete all as specified and as directed.

Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, including necessary forms, moulds, mitred/stopped end etc complete all as spedcified and as directed.

M&L for Precast cement concrete RCC 1:1½:3, type A1 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes / drains etc.) shelves and similar articles with plain faces including necessary formwork and set in cement mortar 1:4 complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

S&F 50mm bore of PVC (HDPE) pipes of pressure rating 6 kgf/sqcm fixed to walls, ceilings or in floors etc or as in perforation pipes in RCC drain cover slabs complete all as specified and as directed.

Surface Excavation not exceeding 30 Cm deep and averaging 25 Cm deep and getting out in Soft/ Loose soil including removing rubbish to outside MD land complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base of floor / pavings ( for base course of hand standing/ vehicler approch) complete all as specified and as directed.

M & L for 100 mm thick Plain Cement Concrete 1:2:4, Type B-1, using 20mm graded aggregate as in Sub base / levelling course ( for base course of hand standing/ vehicler approch) complete all as specified and as directed.etc complete all as specified and as directed.

S&F Colored designer machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 Grade finished with grey cement and pigment including 50mm thick sand cushion complete all as specified and as directed. Make : Ultra, Eurocon, Duracrete, Mehatab as approved by GE.

Removing Excavated spoil to a distance exceeding 1.5 KM and not exceeding 5 KM and deposited where directed complete all as specified and as directed.

M&L for RCC 1:1½:3, type A1 (using 20mm graded granite stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for use and waste of form work to edges of concrete flats, treads, breakes in floors, and sides of RCC/PCC bands in walls, horizontal or in sloping and similar work exc 10cm but n exc 20 cm wide for fair finished surfaces complete all as specified and directed.

M & L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft / loose soil complete all as specified and as directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete 1:1½:3, type A1 (using 20mm graded aggregates) as in foundations, including rafts, footings, foudation beams, plinth beams, bases for columns etc and mass concrete all as specified.

M&L for Reinforced Cement Concrete 1:1½:3, type A1 (using 20mm graded aggregates) as in columns, pillars, piers, posts and struts etc all as specified.

Use and waste of rough finished flat Form work to sides of concrete foundations, rafts, plinth beams and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to faces of columns and similar work, complete all as specified and as directed.

M&L for Mild steel TMT bars 5 to 10 mm dia., and over cut to length, bent to shape required, as in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer over putty [any number of coats] including sand papering on external walls / ceiling surfaces to obtain smooth finish complete all as specified and as directed. Make : (i) Weather coat paint :Apex ULTIMA from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux (ii) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

M&L for mild steel framed work and hung as gates, ornmental and intricate design, including pintal hinges any number, stops, hand made sliding bolts etc, including necessary welding and fixing with screws/ bolts where required and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed

Preperation of new steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of PU paint (Polyurethane full gloss enamel paint) over a coat of epoxy zinc phosphate primer complete by using airless spray method complete all as specified and as directed. Make : Asian, Berger, Jenson & Nicholson, Nerolac and as approved by GE

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

M&L for point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) concealed including Flush type metal GI boxes for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board including taking down existing point wiring and making good the disturbed surface complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one switch. Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

All as per item No. 128 above but for one light point controlled by two two way switch complete all as specified and as directed.

All as per item No. 128 above but for one 3 pin socket outlet 5 amps on independent board complete all as specified and as directed.

All as per item No. 128 above but with 2.5 Sqmm FRLS copper cable for one 15 Amps power point including 2.5 Sq mm FRLS copper conductor cable as earth continuity conductor and connecting it to earth dolly complete all as specified and as directed. Note for item Nos 128, 129, 130 & 131 (i) The rate quoted is inclusive of making good the disturbed surfaces and finishing the same with the surface fionish of adjoining surface. Note (ii) : Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Note (iii) Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

S&F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F switch Modular type single pole 6 Amps Two Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F ceiling rose surface bakelite 65mm dia X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

S&F Modular socket 6A - 2/3 pin combined, complete all as specified and as directed. Make: Legrand/ MK/Anchor (Roma)/ABB

S&F Modular socket 16A - 2/3 pin combined, complete all as specified and as directed. Make: Legrand/ MK/Anchor (Roma)/ABB

S&F steped type modular fan regulator,120 W, 2 module complete all as specified and as directed. Make: MK/Anchor (Roma)/ABB/Legrand

S& F modular white cover plate with frame 2 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 3 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 6 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 8 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one 32Amps triple pole MCB complete all as specified and as directed. Make: Indo Asain Gold Plus / Havales / Schneider

M&L for Sub main wiring with 2 runs of Single Core 2.5 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 20mm bore with accessories along with 1 run of single core 2.5 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Two runs of 2.5 sqmm and one runs of 2.5 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L for Sub main wiring with 4 runs of Single Core 6 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 25mm bore with accessories along with 1 run of single core 6 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Four runs of 6 sqmm and one runs of 6 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L for Sub main wiring with 4 runs of Single Core 10 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 25mm bore / suitable size conduit with accessories along with 1 run of single core 10 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Four runs of 10 sqmm and one runs of 10 sqmm cable as earth along with PVC conduit will be measured as one length.

M&L for Sub main wiring with 4 runs of Single Core 16 sqmm [ for phase & Neutral ] PVC insulated multi stranded FRLS copper cable drawn through PVC conduit of 25mm bore / suitable size conduit with accessories along with 1 run of single core 16 sqmm copper cable as earth continuity conductor including taking down the old existing submain wiring by cutting the wall with machine and making good after completion complete all as specified and as directed. Note :- Four runs of 16 sqmm and one runs of 16 sqmm cable as earth along with PVC conduit will be measured as one length. Note for Item No. 141 to 144 MAKE :(i) Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

Supply, lay, joint, test and commission of LT cable 1100 V grade, [ISI marked] FRLS XLPE insulated, Screened, PVC bedded, Galvanised strip or wire armoured and sheathed, Aluminium conductor Cable of size 3.5 Core, 185 Sq.mm including cable glands, lugs, jointing materials etc laid in trenches / floors / ducts complete all as specified and as directed. Make: Polycab / Universal / Nicco / Havells

S&F 35 W LED Highbay light with innovative finless design and excellent thermal management along with IP66 protection including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all a specified and as directed. Make: Crompton Cat. No-LHB11-35-CDL/60) or equivalent in Havells or philips

S&F in repairs Telephone jack deluxe with shutters 2 line with metal box complete all as specified and as directed. Make: Model No. 800130 RJ11 of Indo Asian/Anchor or equivalent in Bajaj or leader or Plaza

S & F rigid non metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc of size 20mm dia complete all as specified as directed.

S&F 3 Pole MCCB 63-100Amp, 50 Hz, 415 V with rupturing capacity 16 KA with fixed thermal magnetic release type complete all as specified and as directed. Make : Indoasian /Standard/Havells

S&F 3 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 16 KA with fixed thermal magnetic release type complete all as specified and as directed. Make : Indoasian /Standard/Havells

S&F Distribution Board, SPN 8 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S & F MCB SPN 40Amps 240 Volts Gold Plus MCB C curve, complete all as specified and as directed. Make: Indo Asian / STANDARD / HAVELLS

S & F MCB SP 6 to 32 Amps, 240 Volts, Gold Plus MCB C curve, complete all as specified and as directed. Make: Indo Asian / L&T / C&S / Schneider / Legrand

S & F Vertical TPN DB incommer 8 way 24 outgoing having Powder coated sheet steel enclosure fitted with bus bar, DIN channel & neutral link & earth link complete all as specified and as directed. Make Indoasian Cat 811895 or eq in Havales / Schneider/GE

S & F Vertical TPN DB incommer 4 way 12 outgoing having Powder coated sheet steel enclosure fitted with bus bar, DIN channel & neutral link & earth link complete all as specified and as directed. Make Indoasian Cat No812040 or eq in Havales / Schneider/GE

S&F Three Pole 63 Amps MCB 50HZ 415V with rupting capacity 10KA C Curve complete all as specified and as directed. Make Indoasian Cat No NBTPI100/HPL/L&T/stander

S&F Three Pole 100 Amps MCB 50HZ 415V with rupting capacity 10KA C Curve complete all as specified and as directed. Make Indoasian Cat No NBTPI100/HPL/L&T/stander

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I and pouring extra clay soil of quantity not less than one cubic metre into the earth pit and also removal of soil to a distance not less than 50 m including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm c/c reinforcement both ways, watering funnel, 20 mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip 32 x 6mm (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I and pouring extra clay soil of quantity not less than one cubic metre into the earth pit and also removal of soil to a distance not less than 50 m including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm c/c reinforcement both ways, watering funnel, 40 mm dia light grade for protection of earth electrode 40 mm dia for watering complete all as specified and directed and tested on completion.

S&F Aluminium strip of size 25x3.15 mm for lightning conductor (roof conductors)/down conductors) laid in trench/floor including necessery clamps,nuts,bolts and hylem sheet block complete all as specified and as directed.

S & F Earth Continuity Conductor or main earthing lead of Galvanised Iron Strip of size 25x4mm for lightning conductor laid in trench / floor /.fixed to walls including necessery clamps, nuts, bolts and hylem sheet block, on batten or recess or chases or burried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation etc complete all as specified and as directed.

S&F Air termination, single pointed aluminium rod 12mm dia and 300mm long and fixed complete all as specified and as directed.

S&FTest terminal box of size 175x150x100mm made out of 2mm thick hot dip galvanised sheet drilled and screwed including 4 nos 125mm long hexogonal head screwed with test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed.

Supply, lay, joint, test and commission of LT cable 1100 V grade, [ISI marked] FRLS XLPE insulated, Screened, PVC bedded, Galvanised strip or wire armoured and sheathed, Aluminium conductor Cable of size 3 Core, 10 Sq.mm including cable glands, lugs, jointing materials etc laid in trenches / floors / ducts complete all as specified and as directed. Make: Polycab / Universal / Nicco / Havells

S & F LED Post top lantern of 3500 Lumens with IP 65 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed. Make: Havells / Bajaj/ Surya Roshini Ltd

S & F LED flood lights of 7000 Lumens with IP 66 protection with all accessories internally prewired and including connecting up with twin core twisted copper conductor cable of suitable size complete all as specified and as directed. Make: Havells / Bajaj/ Surya Roshini Ltd

S & F MCB SPN 32 Amps 240 Volts Gold Plus MCB C curve, complete all as specified and as directed. Make: Indo Asian / STANDARD / HAVELLS

S & F 40mm dia GI tubing medium grade with minmium length 1.5 Metre bend to shape for holding of flood light including grouting and fixing with suitable clamps in the wall / Pole complete all as specified and as directed. Make : Prakash / Tata / Zenith / Jindal (Note : Rate shall be included for necessary scaffolding and safety measures where required at site )

Sri Sai Kesita Techno Traders

N Sydeswara Rao

TECHNO SOFT SOLUTIONS

SATYAMEGHA ENGINEERS