PERIODICAL SERVICES/CERTAIN REPAIRS TO ROOF, JOINERY, SANITARY FITTINGS , WALL, FLOOR, FALSE CEILING AND CONNECTED WORKS AT ICGS BEYPORE AND CGRA KOZHIKODE

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing) and rubbish of the premises all as specified.

Material and Labour for vitrified ceramic tiles 8-10 mm thick polished area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete complete all as specified and as directed. . Note:- (i) The colour, shade and pattern shall be approved by the GE during execution work. (ii) No extra cost shall be allowed for Removing and refixing and necesary cutting of door etcif any required during execution of work.

Non-skid coloured glazed ceramic tiles of any shade and any pattern of size (pattern consists combination of two or more tiles) 400*400* 8 to 10mm thick, over and including 15mm thick screed brd in CM 1:6 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles complete complete all as specified and as directed. . Note:- (i) The colour, shade and pattern shall be approved by the GE during execution work. (ii) No extra cost shall be allowed for Removing and refixing and necesary cutting of door etcif any required during execution of work.

Material and labour for glazed ceramic coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 complete complete all as specified and as directed.

Dismantling of Stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or platform etc complete all as specified and as directed.

Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 10 mm thick backing coat in CM 1:4 complete all as specified. Including pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite (including moulding etc).

Material and Labour for rounding to edges of Granite slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed

Taking down cement plaster in cement or cement lime mortar on Brick or stone walls etc. including racking out joints, hacking for key , scrubbing down with water etc, inckluding removal of debries out side MD land all as specified and directed.

Material and labour for rendering 15 mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.

Material and Labour for rendering 5 mm thick in cement mortar 1: 3 on fair faces of concrete surfaces of ceiling finished even and smooth with out using extra cement, complete all as specified.

Material and labour for preparation of new plastered/concrete surfaces of walls, providing one or more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified.

Material and labour for preparation of old treated wall surfaces by washing, rubbing, brooming down or steel wire brushing or scraping down smoke soot, moulds, mass and efflorescent salts, and applying one coat of acrylic distemper on walls all as specified and as directed.

Material and Labour for preparation of old decorated surfaces of walls (plastered or unplastered) and cornices, by brooming down with wire brushing or scrapping down smoke soot, moulds, mass and effloroscent salts and applying one coat of white wash upto 4th storey height, complete all as specified and as directed.

Material and Labour for preparation of old decorated surfaces of ceiling/ soffits of chajja & canopy by brooming down with wire brushing or scrapping down smoke soot, moulds, mass and effloroscent salts and applying one coat of white wash upto 4th storey height, complete all as specified and as directed.

Material and labour for preparation of old distempered wall surfaces by washing, rubbing down and stopping the surfaces and applying Two coat of acrylic distemper applied to walls of up to 4 storied buildings complete all as specified and directed

ditto-all as per item No 15 here in before but on ceiling surfaces.

M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on wall surfaces, complete all as specified and directed.

ditto-all as per item No 17 here in before but on ceiling surfaces.

Material and labour for preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of weather proof acrylic emulsion exterior grade (anti fungal paint) premium quality of any tint as approved complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying Two coats of weather proof acrylic emulsion exterior grade (anti fungal paint) premium quality of any tint as approved complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old treated wall surfaces by rubbing, brooming down or steel wire brushing or scraping down smoke soot, moulds, mass and efflorescent salts, and applying one coat of plastic emulsion paint, complete all as specified and as directed.

Material and labour for preparation of old decorated wooden surfaces of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enamel paint applied to surfaces of up to 4 storied buildings all as specified and as directed.

Material and labour for preparation of old decorated steel & iron surfaces of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enamel paint applied to surfaces of up to 4 storied buildings all as specified and as directed.

Material and Labour for Preparation of old decorated existing external surfaces of walls and providing two coats of Cement Base paint complete all as specified.

Supply and fix aluminium powder coated frame for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed. Note : Glass panel/particle board panel filling shall be measured and paid separately.

Supply and fix for powder coated, Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, and sliding tower bolt 150mm long anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof/wall coverings complete all as specified and as directed.

Supply and fixing pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through through specialist agency and complete all as specified and as directed.

Material and labour taking down chowkhats or frames, without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 sqm in each and removing as directed.

Material and labour taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 Sqm in each and removing as directed.

Taking down shutter of any description exceeding 2 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description exceeding 1 sqm but not exceeding 2 sqm each and removing from site complete all as specified and directed.

Material and labour for second class hard wood(indian teak wood) plain solid straight chowkats and frames with carving/design on sides suitable for Tanjavoor doors, wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, well seasoned and finished with polishing, fixed to wall and making good to wall carving as approved all as specified and directed.

Material and Labour for 30mm thick factory made flush shutter with solid core construction with block board core and plywood face panels commercial type on both sides including lipping on edges complete all as specified and directed.

Supply and Fix 2nd class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Supply and Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

Supply and Fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as specified and directed.

Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including taking down old unserviceable one.

Supply and fix for Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including takig down old unservicable one.

Supply and fix repairs Solar Road Stud 125mm x 125mm x 25 mm made from aluminium alloy, Solar powered by monocrystal solar panel, with One high capacity Ni-Cd rechargeable battery, approximate view distance 1000 mtrs, LEDs -010mm, 3 pieces each side and total 6 pieces for high brightness of different colours with back-up 12 hours of continuous lighting at night complete all as specified and as directed by the eng-in-charge. Make : Model Dhruv DA 110 of Sinor Infrastructure or equivalent of Dark Eye/ Greenlite / Road star.

Supply and fix 100mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed.

Supply and fix 75mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed.

Supply and Fix 100mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge.

Supply and Fix 150mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge.

Supply and Fix 150mm long aluminium handle fabricated type anodised all as specified and as directed by Eng-in-charge.

Supply and fixing aluminium alloy,anodised, sliding door bolt of length 250mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed.

Supply and Fix in repairs 300mm long Mild steel ordinay rat tail rod pattern springs including roller and roller plate complete and fixed complete all as specified and directed.

Supply and fixing 2nd class hardwood factory made plain framed panelled shutters 30mm thick with lock rail and with panels of timber flat on both edges(feather edged) or 12mm thick commercial veneered particle board veneers on both side or with 9mm thick BWP commercial ply, size of members of shutters as specified in IS 1003-Part-I, kiln seasoned and chemically pressure treated complete all as specified and as directed.

Material and Labour for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

Supply and fix in repairs 100 mm size mild steel body Mortice lock, vertical type, with 4 brass liver, fixed to aluminium door complete all as specified and as directed.

Supply and fix sheet glass plane of ordinary quality of thickness 3mm & glazing with oil putty in square not exc 0.5sqm in each pane, complete all as specified and as directed.

Supply and fix 4mm thick figured glass, pin headed type and glazing fixed on aluminium jionery with glazing clips in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply only PVC connections 15mm size for Hot and cold water connection with rubber washer & brass nuts, ISI marked of length 600mm complete all as specified and directed.

Supply and fix in repairs waste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed.

Dismantling of water tanks of capacity exceeding 250 ltrs and not exceeing 500 ltrs capacity and removing from site complete all as specified and as directed by Engineer-in-charge.

Dismantling of water tanks of capacity exceeding 500 ltrs and not exceeing 1000 ltrs capacity and removing from site complete all as specified and as directed by Engineer-in-charge.

Supply and fix Rotational moulded Polyetheylene Water Storage Tank 500 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 15mm dia GI Medium Grade 200mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including all incoming and outgoing connection of GI pipe complete and including 20mm PTMT Ball valves high pressure wiith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete for 15mm dia pipe (Minimum weight 15mm- 142 gms/each) fixed on roof top complete all as specified and directed.

Supply and fix Rotational moulded Polyetheylene Water Storage Tank 1000 Ltr capacity Triple Layer (Cylinderical verticle with closed top) including 15mm dia GI Medium Grade 200mm long overflow and wash out pipe each with all required fittings, Checknut, Stopper etc complete hoisted and fixed in position, including all incoming and outgoing connection of GI pipe complete and including 20mm PTMT Ball valves high pressure wiith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete for 15mm dia pipe (Minimum weight 15mm- 142 gms/each) fixed on roof top complete all as specified and directed.

Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified .

Supply and fix in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and aluminised hinging device complete all as specified and directed.

Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, govering pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST

Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed suitable for 15 mm ISI marked and taking down unserviceable ball valves all as specified and as directed.

Supply and fix in repairs Angle valve CP cast copper alloy, fancy type, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed suitable for 20 mm ISI marked and taking down unserviceable ball valves all as specified and as directed.

Supply and fix in repairs Bib taps of 15mm dia, cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix in repairs Angle valve CP cast copper alloy, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix in repairs Stop valves, CP cast copper alloy , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed, complete all as specified.

Supply and fix in repairs Stop valves, CP cast copper alloy , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed, complete all as specified.

Taking down unserviceable IWC & Supply & fix Vitreous china squatting pan 'Orissa' pattern of size 580mm x 440mm white, 'P' or 'S' trap, front or back inlet with integral foot rest excluding flushing cistern & flush pipe including provision of lime concrete bedding fixed in repairs complete all as specified and as directed.

Supply and fix in repairs vitreous china wash hand basin size 550 x 400 mm white, flat back with and including waste fittings brass chromium plated 32mm with long and fly nuts screwed shank excluding taps all as specified and as directed.

Taking down unservicable shower rose and supply and fix brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair Brass CP mixer three ways 15mm bore for mixing “Hot or cold” water screwed down for iron pipe” including OHT and Telephonic shower complete all as specified and as directed.

Supply and Fix in repair vitreous china wash down water closet Pedastal pattern white (excluding flushing cistren ) including trap set, seat cover and fixing of flushing cistern, brackets, flushing pipe etc, etc. with 'P' or 'S' trap, making good the floor to match with existing floor complete all as specified and as directed.

Schedule of Credit (Minus) Rs. 72285.00 NOTE: Bidder shall insert credit amount of Rs. 72285.00 as rate in Green field under Col-5.

LAKSHMI BUILDERS

K R JOSEPH AND SONS

ANAND REFRIGERATION