Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC | L1 | Accepted-AOC agreement executed | |
| 2 | L2₹1.5 L+₹4,311.45 (2.90%)Rejected-AOC | L2 | Rejected-AOC Higher rate | |
| 3 | L3₹1.6 L+₹6,774.87 (4.55%)Rejected-Finance | L3 | Rejected-Finance Higher rate |
| Sl No | Description | Qty | Unit | jijimon irippayil L3 | jithin mp L2 | VELAYUDHAN P V L1 |
|---|---|---|---|---|---|---|
| 1.00Building Maintenance | ||||||
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 2.85 | sqm | 331.22 ₹943.98 | 326.17 ₹929.58 | 316.8 ₹902.88 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.28 | cum | 7,922 ₹2,257.77 | 7,801.3 ₹2,223.37 | 7,577.19 ₹2,159.5 Lowest |
| 1.00 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 2.65 | cum | 6,051.7 ₹16,037.01 | 5,959.5 ₹15,792.68 | 5,788.29 ₹15,338.97 Lowest |
| 1.00 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 26.56 | sqm | 317.16 ₹8,423.77 | 312.32 ₹8,295.22 | 303.35 ₹8,056.98 Lowest |
| 1.00 | 13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm | 26.56 | sqm | 170.95 ₹4,540.43 | 168.34 ₹4,471.11 | 163.51 ₹4,342.83 Lowest |
| 1.01 | 12.47.2:Providing & fixing UV stabilised fibre glass reinforced plastic sheet rooting up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% ultra-violet stabiliser in resin system under approxirnately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2 mm thick flat | 28.5 | sqm | 1,127.79 ₹32,142.02 | 1,106.9 ₹31,546.65 | 1,078.7 ₹30,742.95 Lowest |
| 1.01 | OD78111/2025-2026:Labour charge for fixing existing grill and gate. | 2.5 | Day | 2,056.46 ₹5,141.15 | 2,025.13 ₹5,062.83 | 1,966.96 ₹4,917.4 Lowest |
| 1.01 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 30.3 | sqm | 93.11 ₹2,821.23 | 91.96 ₹2,786.39 | 89.06 ₹2,698.52 Lowest |
| 1.01 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 5.52 | cum | 308.55 ₹1,703.2 | 303.84 ₹1,677.2 | 295.12 ₹1,629.06 Lowest |
Tender Value
₹1.7 L
EMD Value
₹4,234
Closing Date
25 Aug 2025, 1:00 pmClosed
ANASWARA S
The Assistant Engineer, LSGD Section, Kolayad Grama Panchayat
Annual Plan-Kolayad GP Project no. 68/2025-26-Maintenance of Kolayad Veterinary hospital in Kolayad GP under annual plan 2025-26- General Civil Work
2025_LSGD_787300_2
AE/LSGD/KLD/ET-2/2025-26
Open Tender
Civil Works - Buildings
Item Rate
240 days
KOLAYAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,234
Yes
10 Oct 2025
18 Aug 2025
26 Aug 2025
18 Aug 2025
25 Aug 2025
18 Aug 2025
Amount
Building Maintenance
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm
12.47.2:Providing & fixing UV stabilised fibre glass reinforced plastic sheet rooting up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% ultra-violet stabiliser in resin system under approxirnately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2 mm thick flat
OD78111/2025-2026:Labour charge for fixing existing grill and gate.
13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
4.3.2:Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD182898/2025-2026:Providing Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for small heights and all levels etc. including :Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral cores and wiched between two Aluminium sheets (each0.5mmthick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/ Lumiflon based fluoropolymer resin coating of approved colour and shade on face#1 and polymer (Service) coating on as specified, as per the approved shop drawing sand as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places (Modified DAR 25.7)
OD182902/2025-2026:Providing and fitting Steel letter 100 mm to 200 mm height or nearest available size with fitting Charges
jithin mp (BID ID -2306442)
jijimon irippayil (BID ID -2306456)
Bidder Name
jijimon irippayil
VELAYUDHAN P V
jithin mp
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1294950.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .