GE AF/AMB-21/2021-22 REPAIRS TO DOORS, WINDOWS, CUPBOARDS, FLOORING, TILING, PLUMBING AND ALLIED B/R WORKS IN DOMESTIC AREA AT AF STATION AMBALA

Amount

Taking down chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frame) and disposing off

Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each but with shutters (without taking off shutters from the frame) and disposing off

Taking down wooden shutters of size not exceeding 1.0sqm and disposing off complete all as specified and directed

Taking down wooden shutters of size exceeding 1.0sqm but not exceeding 2.0sqm and disposing off complete all as specified and directed

Dismantling boarding including fillets of any decription fixed in any position with nails / screws, etc. and disposing off complete all as specified and as directed

Dismantling fillets, rails, posts, rafters, purlins, etc. under 40sqcm in section complete all as specified and as directed

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed

Taking up or down 15mm bore steel water tubing and connections including disposing off, etc. complete all as specified and as directed

Taking up or down 20mm bore steel water tubing and connections including disposing off, etc. complete all as specified and as directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed

Dismantling and taking down, overhead water storage tanks 250litres to 500litres capacity, including disconnecting from water mains, etc. plugging, etc. including all necessary staging, liftting & lowering, etc. and disposing off complete all as specified and as directed

Dismantling and taking down, overhead water storage tanks 501litres to 1000litres capacity, including disconnecting from water mains, etc. plugging, etc. including all necessary staging, liftting & lowering, etc. and disposing off complete all as specified and as directed

M&L for welding works in windows / doors / ventilators, etc. to broken hinges, bolts, plates, etc. including easening and smoothening to ensure smooth functioning, etc. complete all as specified and as directed

M&L for brickwork with sub-class B bricks (old size bricks), straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed

M&L for rendering 5mm thick plaster, in cement mortar (1:3) on fair faces of concrete surfaces of soffits of slabs, ceilings, etc. finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 15mm thick in cement mortar (1:6) on fair surfaces of PCC block / brick masonry wall / concrete surfaces, etc. finished even and smooth without using extra cement complete all as specified and as directed

M&L preparation of newly plastered / unplastered surfaces and applying three coats of white / colour wash on ceilings, soffits of slabs, etc. complete all as specified and as directed

M&L preparation of newly plastered / unplastered surfaces and applying three coats of white / colour wash on walls, etc. complete all as specified and as directed

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

M&L 35mm thick factory made plain framed paneled door shutter (two panels) 2nd class HW rail and style with lock rail and panels of 12mm thick ISI marked veeneered particle board with commercial veeneering on both faces, with size of rail and style shall be as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc and divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, sizes of members of shutters as specified in clause 8.20 9(b) of SSR Part-I, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., supplied and fitted to chowkats complete all as specified and as directed

S&F steel window (box type) factory fabricated, double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02Nos for each leaf) duly welded, with glazing bars dovetailed or welded including MS fillets, welding of guard bars with one shop coat of red oxide zinc chrome primer overall complete all as specified and as directed Notes: (i) Windows shall be fabricated as per CE Palam drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 (updated up to date) and these drawings shall be referred at the O/o the GE (AF) Ambala (ii) Glazing, wire gauge, guard bars will be measured and paid separately under respective items herein (iii) Any other sundries, etc. as required at site shall be deemed to be included in the quoted rate

S&F steel ventilator with top hung shutter including hinges, steel peg stay, etc. to receive glazing / gauge and one coat of primer and including cutting into and fixing into walls, etc. with hold fast made out of flat iron 25x5mm complete all as specified and as directed

S&F factory fabricated flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain/wooden grain printed coloured PVC sheet reinforced with MS square tube all as per specifications and drawing given in SSR Part-I 2009 all as per manufacturer's instructions and making good the disturbed surfaces complete all as specified and as directed

S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30mm thick (styles), with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front and 2mm thick coloured PVC sheet (tint as approved) on back faces and fixing in frame at site all as shown in and specified in MES Schedule 2020 & 2009 complete all as specified and as directed

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours articles n exc 200cucm each complete all as specified and as directed

M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, area exceeding 3sqcm but not exceeding 6sqcm, clean sawn, secured with nails or brads complete all as specified and as directed

M&L for 2nd class hardwood plain fillets, square, rectangular or triangular in section, area exceeding 6sqcm but not exceeding 13sqcm, clean sawn, secured with nails or brads complete all as specified and as directed

S&F 18/19mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work in cupboard shutters, shelves, etc complete all as specified and as directed

M&L for framed works conforming to Fe 410-W (grade E-250) quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and as directed

S&F bands, straps, hold fasts, wall ties, and similar articles conforming to Fe-290 grade E-165 complete all as specified and as directed

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290 grade E-165 complete all as specified and as directed

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth complete all as specified and as directed

M&L for plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as in bed blocks, insertion of hold fasts, stops, kerbs, etc. complete all as specified and as directed

M&L for non-skid ceramic tiles, jointless, coloured, 7 to 8mm thick, joint free, edge cut, exceeding 0.11sqm and not exceeding 0.18sqm in size, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for non-skid ceramic tiles, jointless, coloured, 7 to 8mm thick, joint free, edge cut, exceeding 0.11sqm and not exceeding 0.18sqm in size, of superior quality as on vertical surfaces, skirting, dado, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed

M&L for non-skid ceramic tiles, jointless, coloured, 7 to 8mm thick, joint free, edge cut, exceeding 0.06sqm and not exceeding 0.11sqm in size, of superior quality on floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for glazed ceramic tiles, coloured of size 450x300x7 to 8mm thick, of superior quality B-III grade, on vertical faces, dados, skirting, risers, etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles with and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed

M&L in repairs for 20mm thick granite stone slab, of any type, table rubbed and polished, in steps, jambs, pillars, window cills, cooking platforms and the like in laid over and including 20mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed

S&F steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for protection of electric clables complete all as specified and as directed of the following bores:

15mm bore

20mm bore

S&F in repairs 15mm dia bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia stop cocks / angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, fancy type, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs sink with drainage board overall size 915mmx460mm and bowl size 410x330x160mm, made of stainless steel 1mm thick for kitchen with plugs, washer and waste including in cement mortar to dwarf wall or including fixing cantilever brackets and connection union to pipe complete all as specified and as directed

S&F in repairs 15mm dia brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe & fixed complete all as specified and as directed

S&F in repairs 20mm dia ball brass valves, high pressure, with polythene float and flynut, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S&F in repairs 32/40mm dia PVC flexible waste pipe 3ft long, suitable for WHBs / sinks, etc. with couplings, etc. complete all as specified and as directed

S&F flush pipe of polyethylene of low or high density or PVC 32mm dia, 3ft long, for low level cistern complete all as specified and as directed

S&F 10litres capacity PVC flushing tank, white / coloured, syphonic action type, low level, valveless, with PVC inlet ball valve, PVC flush pipe, float and suitable sized brackets including cutting of floor / wall and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing and taking down of old PVC flush tank and disposing off complete all as specified and as directed

S&F health faucet, 15mm bore, telephone type, with CP arms, flexible pipe (ABS body) with 1.0m long PVC tube and wall hook of approved finish complete all as specified and as directed

S&F in repairs vitreous China squatting pan, Orissa pattern of size 580x440mm, white, with integral foot rests and 'P' or 'S' trap, connecting to flushing pipe and trap and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing complete all as specified and as directed

S&F in repairs vitreous China wash down water closet pan (Pedestal pattern), coloured (as approved), with 'P' or 'S' trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directed

M&L for preparing of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for preparing of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) complete all as specified and as directed

M&L for preparing of new wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed

M&L for preparing surfaces and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc. area not exceeding 0.1sqm each and treated with tar or coal tar black paint complete all as specified and as directed

S&F butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and as directed

S&F 100mm long mild steel medium weight cold rolled butt hinges fixed with screws / welded to frames complete all as specified and as directed

S&F 50mm long mild steel medium weight cold rolled butt hinges fixed with screws / welded to frames complete all as specified and as directed

S&F 125mm long extruded aluminim handles, fabricated type, anodised complete all as specified and as directed

S&F 100mm long extruded aluminim handles, fabricated type, anodised complete all as specified and as directed

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed

S&F in repairs hasp and staple, 100mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F 250mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro-galvanised, width of flaps when open 40mm complete all as specified and as directed

S&F in repairs mild steel sliding door bolts, length of bolt 250mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed

S&F in repairs mild steel pressed handles, 125mm long, oval type, stove enamelled black complete all as specified and as directed

S&F in repairs mild steel pressed handles, 100mm long, oval type, stove enamelled black complete all as specified and as directed

S&F in repairs 300mm, mild steel, ordinary rat tail rod pattern helical door springs including roller and roller plate fixed with screws to wooden frames or duly welded to steel frames complete all as specified and as directed

S&F in repairs hasp and staple, 75mm, safety type, mild steel with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F in repairs mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed

S&F in repairs door closer aluminium body, hydraulically regulated, designation No. 2 universal type suitable for door shutter 851 to 1000mm wide, of weight between 36 to 60kgs and fixing complete all as specified and as directed

M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed

S&F 3mm thick sheet glass, ordinary quality, area not exceeding 0.5sqm in each pane, cut to required size and shape to existing wooden shutters / MS windows / shutters, etc. with glazing clips, glass oil putty, etc. complete all as specified and as directed

S&F 3mm thick figured / pin headed glass, ordinary quality, area not exceeding 0.5sqm in each pane, cut to required size and shape to existing wooden shutters / MS windows / shutters, etc. with glazing clips, glass oil putty, etc. complete all as specified and as directed

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

S&F in repairs 20mm dia fancy type powder coated (tint as approved) mild steel powder coated curtain / drapery rods, etc. of rod wall thickness 1mm (min), including pair of aluminium, powder coated brackets, holders with funnel at ends complete all as specified and as directed

Supplying, hoisting, fixing and connecting up rotational moulded polythylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. complete all as specified and as directed of the following capacities:

500litres capacity

1000litres capacity

P.G.INFRASTRUCTURE

M/S SHANTI CONSTRUCTION

Anil jindal and sons

M/s R.K.Jain

JS CONSTRUCTION COMPANY

ANIL CONSTRUCTION CO.