Providing Installing and testing of pumping machineries including pipe, cable, control panel misc. material etc. on 2 Tube well under 250 SC Tube well program at 1)Ramsan & 2)Varan village of Deesa Block of Banaskantha district.(2nd attempt)

Name of work : Providing Installing and testing of pumping machineries including pipe, cable, control panel misc. material etc.

on 2 Tube well under 250 SC Tube well program at 1)Ramsan & 2)Varan village of Deesa Block of Banaskantha district.(2nd

Item Item Unit Qty Unit Rate Amount Rs.

1.1 Providing, lowering & testing of three phase sub. pump coupled with

motor suitable for 250mm dia & all required accessories like strainer,

NRV, 5mtr lead cable of suitable size of approved make with

miscellaneous hardware materials etc Complete.

Three phase Submersible Pump set coupled with motor & with all

required accessories like strainer, NRV, 5 mtrs. lead cable of suitable

size of approved make etc.

2.1 Providing of Flat p.v.c Cable size 1 x3x 50 sq mm Mtr 541 1958.39

CABLE: Three core Flat P.V.C. insulated water Proof & flexible copper

cable used for the Sub-motor pump & power wiring shall confirming

to IS: 694 of required size of approved make. The cable should be

bind with column pipe while lowering in tubewell

The cable should be bind with column pipe while lowering in

2.2 Providing of Flat p.v.c Cable size 1 x3x 35 sq mm confirming to IS: Mtr 0 1348.35

694 of required size of approved make.

3 Providing of M.S Column pipe Black ERW/HFIW pipes of ‘C’ class in Nos. 167 3380.93

three meters length & threaded at both ends in the length of 45 mm /

70 mm. of 11 T.P.I / 8 T.P.I. having suitable size of coupling (as per

specification.) at one end & socket (rubber protector) at other end.

size: Column pipe 100 mm dia (4"dia) 3mtr length

Providing of Control Panel board No. 1 84284.50

A.C. Three Phase (A.T.S. type) complete with meters and Capacitor

suitable to motor HP with GEB testing Certificate. Acceptance make ;

As stated in tender make suitable for 75 HP

Providing of Control Panel board No. 1 74538.00

A.C. Three Phase (A.T.S. type) complete with meters and Capacitor

suitable to motor HP with GEB testing Certificate. Acceptance make ;

As stated in tender make suitable for 70 HP

5 Providing of Hot forged M.S. Clamps manufactured from M.S. flat Pair 4 1112.71

confirming to IS: 226 & fitted With ¾” dia 3” long high tensile

strength bolts , Nuts & Washers. (2sets on each sides). Overall length

for clamps should be 4” suitable for column pipes.

size 100mm dia x 100mm Width x16mm thick

6 Providing of C.I.Flange size 4" dia C.I. Flange having 8 TPI threaded & No. 4 235.38

16m.m. thickness.

7 Providing of short bend 100 mm - C.I. flange short bend suitable No. 2 787.46

having flange thickness 16mm & angle of bend 90 degree. Nos. of

holes 04 nos. suitable for 100mm dia pipe.

8 Providing of M.C.T.P./SMTP Main Switches of 200 AMP HRC type No. 2 6790.11

Fuses suitable for 415V acceptable makes as per category-II & III

approved by Electrical Division, Govt. of Gujarat, R&B Department.

9 ELCBs conforming to IS: 12640 and having sensitivity of 100 mA and No. 2 3656.54

short circuit with stand capacity of 6 KA and suitable for operation on

3 phase and neutral 415V having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic

component for following Max rating erected as directed in tender.

10 Providing dust and vermin proof MS cabin suitable for panel board No. 2 23640.67

and for energy meter and fuse unit with required locking

arrangement , minimum degree of protection IP 52 as per IS

fabricated from CRCA sheer steel minimum thickness for base frame

/ channel / gland plates for load bearing members, atleast 1.5 mm for

internal members including cutting, bending, drilling, welding,

riveting with in eternal partitions. The sheet steel enclosure shall be

powder coated as per applicable standard with shade as required

with finish thickness of paint film not less than 80 microns. The Cabin

Shall Have Following Dimension 1.5M×1.25M×0.6M.

Say Total Rs. :-