BID DOCUMENTS FOR CONSTRUCTION WORK OF C.C. ROAD, ASPHALT ROAD , PAVER BLOCK, RCC PIPE DRAIN AND STREET LIGHT IN VARIOUS AREA AT ZALOD NAGARPALIKA ZALOD UNDER: SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKAS YOJANA YEAR: 2025-26. (SECOND ATTEMPT)

SECTION-7 BILL OF QUANTITIES-237

ZALOD MUNICIPALITY, ZALOD

NAME OF WORK :- ESTIMATE FOR CONSTRUCTION WORK OF C. C. ROAD AT BHOJ TADAV TO VASSAIYA FAMILY

SMASHAN AT ZALOD

Qty. Description Unit Amount

1 342.00 Demolition including stacking of serviceable materilas and disposal

Cmt of unserviceable materials with all lead and lift. (i) R.C.C. work

2 456.00 Box Cutting the Road Surface to proper slope and camber for

Cmt. making a base for road work including removing the excavated

stuff and dipositing to road slope as directed all lead and lift etc.

complete upto 50 mt. Lead 112.02 Cmt.

3 228.00 Providing and laying compacted 100 mm thick B.T. Metalling (45 to

Cmt. 63 mm size) using Stone screening 13.2 mm of 0.16 Cmt./10 Smt.

and 0.08 Cmt./10 Smt., Stone Dust including spreading in uniform

layer, watering and consolidation by vibratory roller achived the

desired density, as per clause.404 of M.O.R.T. & H. specification

etc. complete. 2191.33 Cmt.

4 228.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse

Cmt. sand : 6- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Plinth 3114.05 Cmt.

5 342.00 Providing and laying cement concrete work M200 and curing

Cmt. complete excludng the cost of form work an reinforcement of

reinforced concrete work. 4780.96 Cmt.

6 2280.00 Labour charges for concreting with vacume dewatering Technique

Smt. (Trimix or equivalent type) including loading, unloading, carting,

companing complete with "C" channelas as per requirement and

labour charges on directed by Engineer-in-charge.

SBD SECTION-7 BILL OF QUANTITIES-238

7 57.00 Renovation of manhole by increasing the height at top including

Nos. cost of excavation, refitting of C. I. manhole frame and cover

curing etc. complete incl. all carting and providing of materials

which is required for the purpose (except manhole frame and

cover) For all type manhole by providing RCC 1:2:4 Partition walls

with required reinforcement 25 cm thick and circular opening with

500mm clear dia and 0.40 mt. av. ht. 3880.10 No.

Add :- 18% of GST, Rs.

Add :- 1% of Quality Controll, Rs.

Add :- 2% of Contingency Charges, Rs.

SBD SECTION-7 BILL OF QUANTITIES-239

ZALOD NAGARPALIKA, ZALOD

ESTIMATE FOR CONSTRUCTION WORK OF ASPHALT ROAD FROM GAMADI CHOWKADI TO DUNGADI FALIYA

PUMPING STATION AT ZALOD

Item Qty. Description Unit Amount

1 5100.00 Preparing surface by Brushing with wire brushes for removing

Smt caked mud etc. sweeping with brooms and finally fanning the

cleaned surface with gunney bags to remove all loose dirt etc.(ii)

Black top surface. 18.30 Smt

2 552.00 Box Cutting the Road Surface to proper slope and camber for

Cmt making a base for road work including removing the excavated

stuff and dipositing to road slope as directed all lead and lift etc.

complete upto 50 mt. Lead 112.02 Cmt

3 180.00 Providing and laying compacted 150 mm thick B.T. Metalling (40

Cmt to 63 mm size) using Stone screening 13.2 mm of 0.16 Cmt./10

Smt. and 0.08 Cmt./10 Smt., Stone Dust including spreading in

uniform layer, watering and consolidation by vibratory roller

achived the desired density, as per clause.404 of M.O.R.T. & H.

specification etc. complete.

4 1200.00 Providing & Applying priming coat with emulsion at the rate of

Smt 7.50 kg/ 10 Sq. Mt. including cost of asphalt and preparing the

surface heating, and applying etc. complete.

5 180.00 Providing and Laying Bituminous Grout 75 mm thick compacted

M.T. in single layer with using B.T. chips of required gradation and

asphalt VG-30 grade at 1.99% by wright of mix or mixing and

4.00 Kg./10 Smt. asphalt VG-30 for tack coat & using B.T. chips of

required gradation including cleaning and heating asphalt premix

material bt drum mix process in proper gradation and laying with

paver finisher including rolling and consolidation with 8-10

tonne vibratory roller and providing all material, equipment,

tools and plants, fire wood, oil, kerosene, labour charges etc.

complete using contractor's own machineries, drum mix plant

and paver finisher etc. complete.

SBD SECTION-7 BILL OF QUANTITIES-240

6 519.75 Providing and Laying 37.50 mm thick Bituminous Macadam with

M.T. B.T. aggregate as Per MORT & H. specification & asphalt for tack

coat @ 2.50 Kg./10 Smt. with Mechanical Sprayer & Bitumen

Grade 60/70 for mixing @ 34.00 Kg./M.T. i.e., 3.40 % of total

weight of mix including heating the aggregate & asphalt in

continous batching drum mix plant and spreading the same by

paver finisher & consolidation with vibratory roller including

providing all materials equipments, tools & plants, fire wood, oil,

kerosene, labour charges etc. complete using contractor's own

machinery drum mix plant & paver finisher etc. complete.

7 362.25 Providing and Laying 25mm thick S.D.B.C. with B.T Aggregate as

M.T. per M.O.R.T and H. specificaton and (VG 30) asphalt grade 60/70

mixing at 50 kg/M.T. i.e. 5.0% by weight of total mix incuing

heating the aggregate and asphalt in continous batching drum

mix plant and spreading the same by paver finisher and

consolidation with vibratory rollar including providing all

materials equipments, tols and plants, fire wood, oil, kerosene,

labour charges etc. complete using contractor own machinary

drum mix plant and paver finisher etc. complete.

8 6300.00 Providing and laying Bituminous Painting spreading hot asphalt

Smt at the rate of 5 Kg./10 Smt. and spreading flushing sand or stone

dust at the rate of 0.15 Cmt./10 Smt. rate including all cost of

sand, equipment T & P firewood, oil, kerosene, labour charges etc.

complete by using contractor's own machineries.

9 20.00 Up Gradation of Chamber in Road Level. 1332.19 Nos.

Add 18% GST Rs.

Add 2% Contengency Charge Rs.

Add 1% Q.C. Charge Rs.

SBD SECTION-7 BILL OF QUANTITIES-241

ZALOD NAGARPALIKA, ZALOD

ESTIMATE FOR CONSTRUCTION WORK OF PAVER BLOCK FROM GAMADI CHOWKADI TO DUNGADI FALIYA

PUMPING STATION AT ZALOD

Item Qty. Description Total Unit Amount

1 360.00 Filling in foundation and plinth with murrum or selected soil in

Cmt. layers of 20cm. thickness including watering, ramming and

consolidating etc. complete. 273.07 Cmt.

2 180.00 Box Cutting the Road Surface to proper slope and camber for

Cmt. making a base for road work including removing the excavated

stuff and dipositing to road slope as directed all lead and lift etc.

complete upto 50 mt. Lead 112.02 Cmt.

3 270.00 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt Coarse sand, 8 Crushed stone agreegate 40 mm nominal) and

curing complete excluding cost of formwork in foundation and

plinth. (more than 10 ton)

4 1800.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

Smt concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc. Complete.

5 3612.00 Providing and fixing pre-cast concrete kerb stone of gray cement

Rmt based concrete block 30cm length,30cm height and 15cm thick of

M250 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete.

Add 18% GST Rs.

Add 2% Contengency Charge Rs.

Add 1% Q.C. Charge Rs.

SBD SECTION-7 BILL OF QUANTITIES-242

ZALOD NAGARPALIKA, ZALOD

NAME OF WORK : ESTIMATE FOR CONSTRUCTION WORK OF 600 MM DIA RCC PIPE DRAIN FROM

GAMADI CHOWKADI TO DUNGADI FALIYA PUMPING STATION AT ZALOD

Sr. Qauntity Item Total Per Amount

1 1080.00 Excavation for foundation up to 1.5 M Depth including sorting

Cmt out and stacking of useful materials and disposing off the

excavated stuff up to 50 meter lead (A) Loose or soft soil 125.86 Cmt

2 72.00 Excavation for base footings upto depth 1.5 m. to 3.0 m.

Cmt including sorting out and disposing of the excavated material

upto 50 m lead (loose or soft soil) 139.54 Cmt

3 587.00 Supplying and fixing reinforced concrete heavy duty non-

Rmt pressure pipes with collars for culverts including setting and

joining the pipes in C.M. 1:2 watering and laying (To level of

slops of I.S. 458 / 1971 Class NP3 casted by vertically

vibrated technology of following internal diameter. (iv)

4 492.10 Filling available excavated earth (excluding rock) in trenches

Cmt plinth, sides of foundations etc. in layers not exceeding

cm in depth consolidating each disposited layer by ramming

and watering. 137.47 Cmt

5 15.00 Construction work of chamber for 600 mm dia pipe strom

Nos water drain with frame & cover having internal size of 1.50 x

1.50x 1.80 mt. avg clear depth Inside 10 mm plaster And

Perforated Frame & Cover in Slab at top With PVC Weep

Holes All necessary Fitting & materials etc Complete as per

Drawing or directed by engi. In charge.

6 72.00 Providing and laying cement concrete 1:3:6 (1- Cement : 3-

cmt Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in 3005.48 cmt

Add 18% GST Rs.

Add 2% Contengency Charge Rs.

Add 1% Q.C. Charge Rs.

SBD SECTION-7 BILL OF QUANTITIES-243

ZALOD NAGARPALIKA, ZALOD

NAME OF WORK :- ESTIMATE FOR SUPPLYING & ERECTING WORK STREET LIGTH FROM GAMADI

CHOWKADI TO DUNGADI FALIYA PUMPING STATION AT ZALOD

Sr. Qty. Unit Discription Total Unit Amount

1 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size.

304.50 Rmt. (E) 3 Core 2.5 sq. mm 136.35 Rmt.

2 Supplying & erecting following spare parts for panel mounting

Switch Disconnector Fuse Units. Operational Handle Assembly

Complete for (i) 32/63/125 Amps.

3 Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with colour insulating

tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable

socket to each bar, erected in existing cubical panel with

necessary connections. (A) Suitable for 100 Amp. Capacity.

4 Supplying & erecting following spare parts for panel mounting

Switch Disconnector Fuse Units. Neutral Link for (i) 32/63/125

2.00 No. Amps. 438.34 Ea.

5 Supplying and erecting approved make 415V bakelite fuse fittings

for front connection / busbar type, to accommodate HRC fuse link,

with spin - riveted brass contact, having thermo plastic

inflammable material & single piece extruded brass box contact to

lock with adequate cable hole to accommodate aluminium

conductors suitable for (without HRC fuse). For 63 Amp.

6 Supplying and erecting Ammeter / Voltmeter selector switch for

phase AC Supply 500 V on existing panel board with necessary

2.00 No. connections. 317.14 Ea.

7 Supplying and erecting approved make set of indicator lamps of

LED type lamp, lens cover, Bakelite holder complete erected with

necessary connections.

SBD SECTION-7 BILL OF QUANTITIES-244

8 Providing & erecting Spares For Air Circuit Breakers as follows:

(B) Auxiliary Contact Block for CN-CS 800 to 2500 & 6 NO + 6 NC

9 Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required.

585.00 Mtr. For Control Cable.(c) One wire 2.50 sq. mm 26.26 Mtr.

10 Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required.

58.00 Mtr. For Power Cable. (d) One wire 4.00 sq. mm 35.35 Mtr.

11 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of following size

of cables.(e) 4 core 10 Sq. mm

12 29.00 No. Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 K.A. at 415 V, having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 cys. with all internal

connections & complete erected in 16 G.M.S. housing on angle

frame. with Housing/Encloser (The Enclousers should be used of

same company of MCCBs to be used) Cat.III

13 Approved make ELCBs / RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of

6 KA and suitable for operation on 3 phase and neutral 415V.

having charectorstic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed.

2.00 No. (iii) 63 Amps. FP Cat.III 3040.10 Ea.

14 Providing & erecting 240 V MCB Double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity.

29.00 No. (A) 6 to 32 Amp. Cat-III. 278.76 Ea.

15 130.00 Kgs. Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G.

SBD SECTION-7 BILL OF QUANTITIES-245

16 29.00 No. Pipe type earthing having 150 cms. long and 2.5 cms. dia.

galvanised iron pipe with coupling and buch burried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

17 Supplying & erecting funnel type earthing having earth plate of

following size burrid in specifically prepared earth pit 3 mtr.

below ground with 40 kg. charcol and salt with alternate layers of

charcol & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh

for watering & bricks masonry block, C.I. Cover complete as per

para 7.3 of IS 3043 with necessary length of double G.1 / copper

earth wire No 6 SWG bolted with lug to the plate and covered in

12 mm dia. G.I. pipe 2.5 mtr long complete connected to the

nearest switch gear with end socket as per direction & duly tested

by earth tester confirming to ISS (As per drawing)with following

No. (C) with 60 x 60 x 0.315 cms. Copper earth plate Ea.

18 29.00 No. For using salt and charcoal/coke as required for pipe type 171.70 Ea.

19 Providing and erecting XLPE (IS:7098)(I)-88 ISI marked armoured

cable multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing cable trench / pipe at

road crossing or floor of following size of cables.

623.50 Mtr. (C) 4 core 10 Sq. mm 138.37 Mtr.

20 623.50 Mtr. Providing & laying approved make Double Walled Corugated pipe

(DWC) of polythylene (Confirming to IS-14930-II) with necessary

connecting accessories of same materials at required depth for

laying of cable. Below ground / road surface for enclosing cable

and back filling the same to make ground as per original. (C)

mm Dia 62.62 Mtr.

21 Supplying following size of Light duty “A” Class G.I. Pipe &

erecting as directed by Engineer-in-charge.

150.00 Mtr. (B) 50 mm dia 300.98 Mtr.

22 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

29.00 No. (c) 2 to 4 core 10 Sq. mm 38.38 Ea.

23 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

29.00 No. (d) 2 to 4 core 16 Sq. mm 47.47 Ea.

SBD SECTION-7 BILL OF QUANTITIES-246

24 Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables.

5.00 No. (e) 2 to 4 core 25 Sq. mm 51.51 Ea.

25 29.00 No. Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia, 3 mm

thickness with 225mmX225mmX16mm base plate, 4-M20 Bolts

and 600mm long with necessary G.I. J Bolts .Approx Pole weight

26 Providing Decorative street light pole bracket consisting of Light

Class M.S. pipe of 4.2 cms. outside dia. complete with suitable

M.S. sleeve tubing of approximate 45 cms. and length suitable for

76.5 mm/ 80mm./ require size pole top having sufficient fastners

for fixing the brackets and having spread of 1 mtr. length with

suitble rise as per site condition & suitable welded stiffner reducer

and nipple with check nut complete painted with one coat of Red

oxide/PU base primer and two coats of Aluminium/PU paint.with

following nos. of arms. [A] Single Arm Bracket 1.5 Mtr

27 Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 3 Watt and above assembled

on single MCPCB, efficiency more than 130 lm/w and corrosion

free High pressure die cast aluminum housing with smooth finish

powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)(A) Street

Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (iii) Above 60 to

SBD SECTION-7 BILL OF QUANTITIES-247

28 2.00 No. Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup

channel day clock with 14 memory programme, suitable to operate

on 240V + 5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also comporised permanent

ON/OFF switching. Programming switches & housed in fire proof

thermoplastic enclosure & transperent cover erected as required

with necessary connection.

29 2.00 No. Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, confirming to IS 13032 and BS

5486-1986 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used). (B)

Three phase 4 way SS Double door for single phase outgoing

horizontal box. 2339.16 Ea.

30 2.00 Ea Supplying & erecting power contactor for time switch complete

erected as per direction Cat III 1883.65 Ea

(B)2 pole 250V 32 Amp

31 2.00 No. Supplying & erecting MINI SECTION PILLAR 75 x 60 x 45 cms

fabricated from 16 Gauge thick joint legs M.S. Sheet with angle

iron legs 45 cms long made from 35x35x5 mm thick.Jointless M.S.

Angle with cable clamps to be buried in ground to have

appropriate erectionb to work Uniform Until erected with cement

concrete foundation and 45cms high bricks work finishing with

plaster ect. hinged double door with 3" * 4" vision panel covered

with Mesh & V. panel overlapping with flap for meter reading

inernally supported on both side, with itnternal and outside looking

arrangement with look and keys in duplicate 35*35*5 mm M.S.

Angle of Two Nos. one is welded and other with nut and bolt for

erecting bakelite sheet. Painting the Section pillar inside and out

side with Seven tank powder coated paint.. Section pillar roof

shoud be without joint with water leakage proof & tested as per IP

55 test & followed by IS 2147 of 1962. 3595.60 Ea.

For GEB Connection Charges Rs.

Add 18% GST Rs.

Add 2% Contengency Charge Rs.

Add 1% Q.C. Charge Rs.

SBD SECTION-7 BILL OF QUANTITIES-248