SR to Repair and Replace AC parts and Providing 5 nos new AC machine For UPS Rooms and AHU for Chamber at Assembly building Gandhinagar.(2nd attempt)

:: BILL OF QUANTITIES::

Name of SR to Repair & Replace AC parts and Providing 5 nos. new AC machine For UPS Rooms & AHU for Chamber at Assembly building Gandhinagar.(2nd

Work:- attempt)

Sr. No. Item Qty. Unit Rate Amount

Providing and erecting Inverter based approved make split air-conditioning unit consisting of

condensing unit with variable speed fan motor, inverter type hermetically sealed rotary compressor

with accessories etc. duly connected separately erected evaporating unit and blower motor with its

1 accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for 4.00 Ea. 34820.76

( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with

necessary core cutting. (1)For 3 Star Rating of current year ((B) for 1.5 ton capacity

(C) for 1.7 to 2 ton capacity 1.00 Ea. 43105.79

Supplying and erecting insulated pair of soft copper tubing open or concealed including power and

2 control cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity 32.00 Rmt. 822.14

Replacing old and unserviceable Indoor unit Fan Blower motor by new 12 watt to 30 Watt capacity

3 suitable for Split AC machine. 2.00 Nos. 1087.77

Overhauling and servicing the Split type A.C.MACHINES by Chemical cleaning of the condenser,

4 cooling coil etc. by veniclean/Eq. material, water & cleaning all necessary parts and putting the 4.00 Nos. 514.09

machine in working order.

Flushing the line, leak testing, leak stopping, vacuuming, dehydrating and charging the gas in the

5 refrigeration system for A.C. machine up to 2 TR 4.00 Nos. 1473.59

Supplying, erecting & commissioning Horizontal Ductable type/Ceiling suspended chilled water air

handling unit made of 25mm thick. consisting of preplasticized G.I. casing of 0.8mm thick outer layer

and 0.8mm inside layer with polyethylene foam (PUF) Thermal break insulation, AL Profile factory

injected between them by injection moulding machine complete with following capacities complete

with multiple variable speed suitable static pressure centrifugal blower, 6 rows cooling coil, filter

6 section with 15-micron synthetic non woven pre filters with GI sheet housing duly powder coated, 1.00 Ea. 311080.00

belt/direct driven drive package with TEFC drive motor suitable for 415+/-10% volts,50Hz,3 phase

A.C. supply, stainless steel drain pan with sandwitch PUF insulation & drain connection,room -

thermostats, control panel & Certifications: ISO 9001 : 2015, AHRI and Eurovent certification

etc.Capacity: (1) 2200 CFM & 8 TR Capicity. All parts and accessories are standard Make.

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water

piping inside the building (with necessary clamps, vibration isolators and fittings but excluding

valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of

minimum 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean

temperature class 'O' insulation applied by suitable adhesive complete including repairing of

7 damage to building etc. as per specifications and as required complete in all respect. Note:- The 40.00 Mtr 1550.35

Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm

shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet

for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and

above.(L) 40mm dia. (32 mm thick insulation)

(N) 25 mm dia(19 mm thick insulation) 60.00 Mtr 1207.96

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled

water plumbing duly insulated to the same specifications as the connected piping and adequately

supported as per specifications.providing and erecting BUTTERFLY VALVE (MANUAL) with C I body SS

8 Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as 3.00 Ea. 3039.09

specified (H) 40mm dia.

providing and erecting BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body

flanged construction with EPDM coated disc with long pitch with protected out pipe insulation &

9 PN 16 pressure rating for chilled / hot water circulation as specified.(H) 40 mm dia 1.00 Ea. 4614.69

providing and erecting Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for

10 chilled / hot water circulation including insulation as specified.(H) 40mm dia. 1.00 Ea. 3758.21

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves

11 complete as required 2.00 Ea. 1079.69

12 Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber insulation.(D) 25 mm dia. 40.00 Rmt. 77.77

Six lakh eighty-seven thousand one hundred fifty-five point five two

I/ We am/are willing to carry out the work at_________% above / below percent (should be written in figure & words) of the estimated mentioned above. Amount

of my / our tender works out as under.

Estimated amount put to Estimated amount put to

(a) I/we hereby declare that we have visited the site and fully exquisite myself/ourselves with the Local situation regarding materials labour and other factors

pertaining to work before submitting Tender.

(b) I/we hereby declare that we have carefully studies the conditions of contracts. Detailed Specification and other tender document of this work and agree to

execute the same accordingly.

1 If required and found necessary material to be used for this work and brought at site will have to sent to Govt.approved laboratory. The qualified

agency/ manufacturer of Particular product under testing will have to pay/ bear necessary charges.

2 All works shall be carried out as per public works Department hand book and other Specification.

3 Rates are inclusive of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.

3 Rates are inclusive of 1% Labour cess in tender amount so 1% of total amount of bill will be deducted from the bill.

4 The material to be used in this work must be as per instruction by under liason of Engg. In charge.The agency will have to agree to carried out the work

as per brand/make demand of concern deptt.

5 Contractor must have registration in E-2 & above class registered under elect. (R & B) division.

Contractor Dy. Exe. Engineer Executive Engineer

Sachivalay Complex Elect. Sub-Div.No.-2 Sachivalaya Complex Electrical

R. & B. Deptt. Gandhinagar R. & B. Deptt. Gandhinagar