Providing Supplying and installation Children Paly Equipments & Pre fabricated Security cabin in Meera Garden in City Area at Dwarka Under SJMMSVY Grant year 2025-26

Name of work : Providing Supplying and installation Children Paly Equipments & Pre fabricated

Security cabin in Meera Garden in City Area at Dwarka Under SJMMSVY Grant year 2025-26

Schedule No. Name Of Work Amount

Providing Supplying and installation Children Paly Equipments in Meera Garden at Dwarka

Under SJMMSVY Grant year 2025-26

Providing Supplying and installation Pre fabricated Security cabin in Meera Garden at

Dwarka Under SJMMSVY Grant year 2025-26

Providing Supplying and installation Pre fabricated Security cabin in Ahilya Bai Upvan and

Dwarka Nagarpalika Office at Dwarka Under SJMMSVY Grant year 2025-26

I / Weam / are willing to carryout the work at……. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under

(*Please strike out whichever is not applicable).

*Estimatedamount put to tender *Estimatedamount put to tender

Deduct…….……% below Add……..…% Above

In words………………….. In words………………………..

Note 1:- The Contractor shall exhibition board with detailed specification and details of work as directed by the Engineer – In –

Charge for which no extra payment shall bemade

Note 2:- The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Note 3:- GST and Income tax TDS will be deducted at a source while making payments of bills.

Note 4:- In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017

Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in R.C.C. items where the reisa change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

Note 5:- GST WILL BE PAID EXTRA AS PER TENDER CONDITION

DWARKA NAGAR PALIKA

DEVBHUMI DWARKA

Name of work : Providing Supplying and installation Children Paly Equipments in Meera Garden at Dwarka Under

SJMMSVY Grant year 2025-26

SCHEDULE - "B-1"

Item. No. Description of Item Quantities Unit Amount

Providing Supplying and installation the 4 Seat Swing (A-Type) is made using

high-quality MS Round Pipe (Mild Steel) for strong and durable outdoor use. The

main frame structure consists of 76 mm diameter MS round pipe with 3 mm

thickness, while the support legs and cross bracing are made from 60 mm MS

round pipe to provide additional stability and strength. The swing is designed to

accommodate four seats, allowing four children to use it simultaneously. Each

seat is made of FRP or rubber-coated material with a comfortable and safe

design. The seats are connected with 6 mm GI chains with PVC coating, which

1 are rust-resistant and safe for children. The swing operates with heavy-duty

hooks fitted with nylon bushes or ball bearings to ensure smooth movement. The

approximate height of the swing is 2.4 meters and width is around 3.6 meters.

The entire structure is treated with anti-rust primer and finished with outdoor

powder coating paint to protect it from weather conditions. The swing is securely

installed with 1:2:4 concrete foundation fixing, and all edges are smoothly

finished to ensure maximum safety for children during use. The design and

location shall be as per the instructions of the Engineer incharge.

Providing Supplying and installation The Multi Play Station with Swing and Slide

is manufactured using high-quality MS (Mild Steel) round pipes and square

pipes , designed for durability and outdoor playground use. The main structure is

made from MS pipes of 60 mm to 76 mm diameter with 2–3 mm thickness

providing strong support and stability. The unit includes one double wave slide

made of LLDPE/FRP material , a platform with protective side panels , one roof

canopy made from molded LLDPE , two single swings with rubber/FRP seats

2 and GI chains , and one cradle swing seat for small children . The structure also

includes a ladder or step access to the platform with safety railings. All metal

parts are rust-proof treated with primer and finished with outdoor powder coating

paint to ensure long life and resistance to weather conditions. The equipment is

designed with smooth edges and child-safe fittings , and it is installed using

ground fixing with concrete foundation for stability and safety in playground

areas such as parks, schools, and residential societies. The design and location

shall be as per the instructions of the Engineer incharge.

Providing Supplying and installation the Double Seesaw (2 Seater Seesaw) is

manufactured using high-quality MS (Mild Steel) round pipe designed for

strength, durability, and safe outdoor playground use. The main beam is made

from MS round pipe of approximately 60 mm diameter with 2–3 mm thickness,

supported on a sturdy central MS pipe frame with proper balancing support. The

seesaw is designed for two children at a time, with ergonomically shaped

HDPE/FRP seats provided at both ends for comfortable seating. Each seat is

fitted with strong MS handle bars and footrests to ensure proper grip and safety

3 while playing. The base support is firmly fabricated using MS pipes and plates to

provide stability during operation. All metal components are treated with anti-rust

primer and finished with outdoor powder coating paint, making the equipment

resistant to weather conditions and corrosion. The structure is designed with

smooth rounded edges and child-safe fittings, and the unit is installed with

ground fixing using a concrete foundation to ensure maximum stability and safety

in parks, schools, and residential playgrounds. The design and location shall be

as per the instructions of the Engineer incharge.

Providing Supplying and installation the 4 Seater Merry-Go-Round is

manufactured using high-quality MS (Mild Steel) pipes and heavy-duty structural

frame, designed for durability and safe outdoor playground use. The main

rotating structure is fabricated from MS round pipe of approximately 40–60 mm

diameter with 2–3 mm thickness, mounted on a central vertical pipe with a heavy-

duty bearing system to ensure smooth and stable rotation. The equipment is

designed with four individual FRP/LLDPE molded seats arranged symmetrically

around the center, allowing four children to sit comfortably at a time. Each seat is

4 provided with MS support handles and protective side frames to ensure proper

grip and safety during rotation. The base frame is constructed using strong MS

pipes with wide ground support for better stability. All metal parts are treated with

anti-rust primer and finished with outdoor powder coating paint to withstand

weather conditions and corrosion. The equipment is designed with smooth edges

and child-safe fittings, and it is securely installed with concrete foundation fixing,

making it suitable for parks, schools, and residential playgrounds. The design

and location shall be as per the instructions of the Engineer incharge. (As per

Providing Supplying and installation the Spiral Slide with Platform and Ladder is

manufactured using high-quality MS (Mild Steel) pipes and structural members,

designed for strong, safe, and durable outdoor playground use. The supporting

structure and platform frame are made from MS pipes of approximately 60–76

mm diameter with 2–3 mm thickness, providing stability and strength. The unit

consists of one spiral slide made from LLDPE/FRP material, designed with

smooth curves to ensure safe and enjoyable sliding for children. Access to the

slide is provided through a MS ladder with anti-skid steps and safety handrails,

5 leading to an elevated platform fitted with protective guard rails to prevent falls.

The slide exit is smoothly curved and positioned close to the ground for safe

landing. All metal components are treated with anti-rust primer and finished with

high-quality outdoor powder coating paint, ensuring resistance to corrosion and

weather conditions. The entire structure is designed with rounded edges and

child-safe fittings, and it is installed with proper ground fixing and concrete

foundation to ensure maximum safety and stability in parks, schools, and

residential playgrounds. The design and location shall be as per the instructions

of the Engineer incharge.

Providing Supplying and installation the Roller Slide with Ladder is manufactured

using high-quality MS (Mild Steel) pipes and structural sections, designed for

durable and safe outdoor playground use. The main supporting frame is

fabricated from MS square/round pipes of approximately 50–60 mm diameter

with 2–3 mm thickness, providing strong structural stability. The sliding portion

consists of multiple heavy-duty HDPE/nylon rollers mounted on a sturdy MS

frame, allowing children to slide smoothly and safely. Access to the slide is

provided through a MS ladder with anti-skid steps and side handrails for safe

6 climbing. The slide side panels are made from MS sheet/HDPE guards to ensure

children remain safely within the slide path during use. All metal components are

treated with anti-rust primer and finished with outdoor powder coating paint,

making the equipment resistant to corrosion and weather conditions. The

structure is designed with smooth edges and child-safe fittings, and it is nstalled

with ground fixing using a concrete foundation to ensure stability and safety in

parks, schools, and residential playgrounds. The design and location shall be as

per the instructions of the Engineer incharge.

Providing Supplying and installation this playground slide is designed for children

aged 3–12 years. The structure has a platform height of about 5–6 feet and a

total height of around 6.5–7 feet, with a slide length of approximately 9–10 feet

and a width of about 1.5–2 feet. The slide part is usually made from LLDPE or

FRP plastic to provide a smooth and safe sliding surface, while the frame and

ladder are made from mild steel pipes with powder coating to prevent rust and

7 increase durability. The ladder has anti-skid steps and side safety rails, and the

top platform includes protective guard rails for safety. All edges are rounded and

smooth to avoid injury. The legs of the structure are fixed into the ground with a

concrete foundation to ensure strong stability and safe use in playgrounds,

parks, or schools. The design and location shall be as per the instructions of the

Engineer incharge. (As per MR)

Providing Supplying and installation this small playground slide is designed for

young children and is suitable for parks, schools, and gardens. The slide usually

has a platform height of about 3–4 feet and a total height of around 4–4.5 feet,

making it safe for smaller kids. The slide length is approximately 6–7 feet with a

width of about 1.2–1.5 feet. The sliding surface is generally made of FRP (Fiber

Reinforced Plastic) or LLDPE plastic, which provides a smooth and durable

8 surface. The frame and ladder are made from mild steel (MS) pipes with powder

coating to protect against rust and weather. The ladder includes anti-skid steps

and side handrails for safety, and the top platform has protective guard rails. All

edges are rounded to prevent injury. The legs of the structure are fixed into the

ground with a concrete foundation to ensure stability and safe use. It is ideal for

children in the age group of 2–8 years. The design and location shall be as per

the instructions of the Engineer incharge.

Providing Supplying and installation this big playground slide is designed for

parks, schools, and public play areas for children. The structure typically has a

platform height of about 7–8 feet and a total height of around 8–9 feet. The slide

length is approximately 12–14 feet, providing a longer and smoother sliding

experience, and the slide width is about 1.5–2 feet. The sliding surface is usually

made from FRP (Fiber Reinforced Plastic) or heavy-gauge metal sheet, ensuring

strength and durability. The supporting frame and ladder are made from mild

9 steel (MS) pipes with powder coating or enamel paint to prevent rust and

withstand outdoor weather conditions. The ladder is fitted with anti-skid steps and

side handrails for safety, and the top platform has protective guard rails to

prevent falls. All edges are smooth and rounded to reduce the risk of injury. The

legs of the structure are firmly fixed in the ground with a concrete foundation to

provide strong stability. This slide is suitable for children in the age group of 5–15

years. The design and location shall be as per the instructions of the Engineer

Providing Supplying and installation this climbing wall with rope net is designed

for children’s playgrounds in parks and schools to develop strength, balance, and

coordination. The structure usually has a height of about 7–8 feet and a width of

approximately 5–6 feet. One side consists of a rock climbing panel made from

FRP or heavy-duty HDPE board fitted with strong plastic climbing holds, while

the other side has a durable nylon or polypropylene rope net for climbing.The

supporting frame is made from mild steel (MS) pipes with powder coating to

10 provide strength and protection against rust and weather conditions. The ropes

are high-strength braided ropes with secure joints for safety. All edges and

climbing holds are smooth and child-safe to prevent injuries. The legs of the

structure are installed in the ground with a concrete foundation to ensure stability

during use.This equipment is suitable for children in the age group of 5–14 years

and is ideal for improving physical fitness, confidence, and climbing skills. The

design and location shall be as per the instructions of the Engineer incharge.

Providing Supplying and installation Trope climbing net is designed for children’s

playgrounds in parks, schools, and open gym areas to improve strength, balance,

and coordination. The structure usually has a height of about 6–7 feet and a

width of approximately 7–8 feet . The climbing net is made from high-strength

nylon or polypropylene rope with strong knots to provide durability and safety

during climbing.The supporting frame is made from mild steel (MS) pipes with

powder coating or enamel paint to protect against rust and outdoor weather

11 conditions. The rope net is tightly fixed to the frame to ensure stability and safe

use. All metal edges are smooth and rounded to prevent injury. The vertical

poles are installed in the ground with a concrete foundation to make the

structure strong and stable.This equipment is suitable for children in the age

group of 5–14 years and helps in developing physical fitness, grip strength, and

climbing skills .The design and location shall be as per the instructions of the

Engineer incharge.

Providing Supplying and installation the Spider Web Climbing Frame is an

outdoor play equipment unit designed for children aged 5–12 years. The

structure is fabricated using heavy-duty MS (Mild Steel) square pipe frame of

minimum 50mm x 50mm with 2–3mm thickness, treated with anti-rust coating

and finished with high-quality, weather-resistant powder coating for long-term

outdoor durability. The climbing net is made of 16mm to 18mm thick UV-

stabilized polypropylene (PP) or nylon rope with internal steel core reinforcement

for enhanced strength and load-bearing capacity. The rope is arranged in a

spider web pattern and securely fixed to the frame using heavy-duty aluminum or

12 MS clamps.The equipment is designed to withstand varying weather conditions

and provide high structural stability. Standard size is approximately 5 ft to 6 ft in

height and width (customizable as per site requirement). The structure is installed

with proper ground anchoring using concrete foundation for safety and stability.

All edges are smooth-finished with no sharp projections to ensure child safety.

The unit supports multiple users at a time and helps in developing balance,

coordination, strength, and motor skills. The product is low maintenance, durable,

and ideal for parks, schools, societies, and public playgrounds. The design and

location shall be as per the instructions of the Engineer incharge.

Providing Supplying and installation the Duck Spring Rider is an outdoor

playground equipment designed for children aged 2–6 years. The body is made

from high-quality, UV-stabilized LLDPE (Linear Low-Density Polyethylene) or

FRP material, molded in an attractive duck shape with smooth edges and

rounded corners for maximum safety. The seat is ergonomically designed with

proper back support and footrest for comfortable riding.The rider is mounted on a

heavy-duty, powder-coated MS (Mild Steel) spring made from high-tensile steel,

ensuring durability, flexibility, and long service life. The spring is securely fixed

13 with anti-pinch finger safety covers and strong base plates. The bottom base

frame is fabricated from heavy-duty MS material with anti-rust treatment and

outdoor powder coating finish.The equipment is designed for single-child use and

installed with a strong concrete foundation for stability and safety. It is weather-

resistant, corrosion-resistant, and requires low maintenance. The bright, fade-

resistant colors make it attractive for parks, schools, gardens, and residential

play areas while promoting balance, coordination, and physical activity in young

children. The design and location shall be as per the instructions of the Engineer

Providing Supplying and installation the Hourse Spring Rider is an outdoor

playground equipment designed for children aged 2–6 years. The body is made

from high-quality, UV-stabilized LLDPE (Linear Low-Density Polyethylene) or

FRP material, molded in an attractive duck shape with smooth edges and

rounded corners for maximum safety. The seat is ergonomically designed with

proper back support and footrest for comfortable riding.The rider is mounted on a

heavy-duty, powder-coated MS (Mild Steel) spring made from high-tensile steel,

ensuring durability, flexibility, and long service life. The spring is securely fixed

14 with anti-pinch finger safety covers and strong base plates. The bottom base

frame is fabricated from heavy-duty MS material with anti-rust treatment and

outdoor powder coating finish.The equipment is designed for single-child use and

installed with a strong concrete foundation for stability and safety. It is weather-

resistant, corrosion-resistant, and requires low maintenance. The bright, fade-

resistant colors make it attractive for parks, schools, gardens, and residential

play areas while promoting balance, coordination, and physical activity in young

children. The design and location shall be as per the instructions of the Engineer

Providing Supplying and installation the Monkey Bar is an outdoor fitness and

playground equipment designed for children and adults to improve upper body

strength, coordination, and endurance. The structure is fabricated using heavy-

duty MS (Mild Steel) pipes with a minimum diameter of 48mm to 60mm and

thickness of 2–3mm, ensuring high strength and stability. The horizontal ladder

bars are evenly spaced and welded securely to provide safe and comfortable

grip. The complete structure is treated with anti-rust coating and finished with

high-quality, weather-resistant powder coating for long-lasting outdoor

15 performance. The unit is supported with vertical posts firmly anchored into the

ground with concrete foundation for maximum safety and durability. The base is

fitted with sturdy platform covers for additional stability.Standard dimensions are

approximately 7–8 feet in length and 6–7 feet in height (customizable as per

requirement). All edges are smoothly finished with no sharp projections to ensure

user safety. The equipment is weather-resistant, corrosion-resistant, low

maintenance, and ideal for parks, schools, gym areas, and public playgrounds.

The design and location shall be as per the instructions of the Engineer incharge.

Providing Supplying and installation the Suspension Bridge is an outdoor

playground equipment designed to enhance children’s balance, coordination, and

motor skills. The structure is fabricated using heavy-duty MS (Mild Steel)

pipes/posts with a minimum diameter of 48mm to 60mm and 2–3mm thickness,

ensuring strong structural stability. The framework is treated with anti-rust coating

and finished with high-quality, weather-resistant powder coating for long-term

outdoor durability.The walking platform consists of multiple anti-skid wooden or

FRP steps suspended with high-strength galvanized steel chains. The chains are

securely fixed to the top support bar with heavy-duty shackles and connectors to

16 ensure safety and durability. All edges are smooth-finished, and chain joints are

covered or designed to prevent finger entrapment.The unit is installed with strong

concrete foundation anchoring for maximum stability. Standard dimensions are

approximately 8–10 feet in length and 4–5 feet in height (customizable as per

requirement). The equipment is weather-resistant, corrosion-resistant, low

maintenance, and suitable for parks, schools, gardens, and residential play

areas. It supports multiple children at a time and encourages physical activity and

confidence building. The design and location shall be as per the instructions of

the Engineer incharge.

DWARKA NAGAR PALIKA

DEVBHUMI DWARKA

Name of work : Providing Supplying and installation Pre fabricated Security cabin in Meera Garden at

Dwarka Under SJMMSVY Grant year 2025-26

SCHEDULE - "B - 2"

Item. No. Description of Item Quantities Unit Amount

Providing Supplying and installation The Security Cabin of size 10 feet x 10 feet

is a prefabricated portable structure designed for use as a security guard cabin,

site office, or gate cabin. The overall structure is fabricated using heavy-duty MS

(Mild Steel) frame made from square/rectangular hollow sections with proper

reinforcement for strength and durability. The external walls are made of high-

quality insulated PUF panels or MS sheet panels with anti-rust treatment and

weather-resistant powder-coated or painted finish.The cabin is provided with one

main door made of MS frame with flush door/steel door and proper locking

arrangement. Aluminum sliding windows with glass panels and safety grills are

installed for ventilation and visibility. The roof is constructed with insulated

1 panels or GI sheet with proper waterproofing to prevent leakage and heat

penetration.The flooring consists of heavy-duty cement board/ply board with

vinyl flooring or chequered plate finish for long life and easy maintenance. The

cabin is equipped with basic electrical fittings including LED light, switchboard,

plug point, and concealed wiring. Proper ventilation openings are provided for air

circulation.The structure is fully portable, mounted on a sturdy base frame, and

can be easily shifted as per requirement. It is weather-resistant, corrosion-

resistant, low maintenance, and suitable for construction sites, residential

societies, factories, parking areas, and commercial premises. The design and

location shall be as per the instructions of the Engineer incharge.

DWARKA NAGAR PALIKA

DEVBHUMI DWARKA

Name of work : Providing Supplying and installation Pre fabricated Security cabin in Ahilya Bai Upvan and

Dwarka Nagarpalika Office at Dwarka Under SJMMSVY Grant year 2025-26

SCHEDULE - "B - 3"

Item. No. Description of Item Quantities Unit Amount

Providing Supplying and installation The Security Cabin of size 10 feet x 10 feet

is a prefabricated portable structure designed for use as a security guard cabin,

site office, or gate cabin. The overall structure is fabricated using heavy-duty MS

(Mild Steel) frame made from square/rectangular hollow sections with proper

reinforcement for strength and durability. The external walls are made of high-

quality insulated PUF panels or MS sheet panels with anti-rust treatment and

weather-resistant powder-coated or painted finish.The cabin is provided with

one main door made of MS frame with flush door/steel door and proper locking

arrangement. Aluminum sliding windows with glass panels and safety grills are

installed for ventilation and visibility. The roof is constructed with insulated

1 panels or GI sheet with proper waterproofing to prevent leakage and heat

penetration.The flooring consists of heavy-duty cement board/ply board with

vinyl flooring or chequered plate finish for long life and easy maintenance. The

cabin is equipped with basic electrical fittings including LED light, switchboard,

plug point, and concealed wiring. Proper ventilation openings are provided for

air circulation.The structure is fully portable, mounted on a sturdy base frame,

and can be easily shifted as per requirement. It is weather-resistant, corrosion-

resistant, low maintenance, and suitable for construction sites, residential

societies, factories, parking areas, and commercial premises. The design and

location shall be as per the instructions of the Engineer incharge.