SPECIAL REPAIRS FOR REPLACEMENT OF WINDOWS ALONG THE GRILL AND TILING OF WALLS IN ALL CLASS ROOMS BLDG NO P 66 AT NCS DH SPECIAL REPAIRS TO P 73 AT SECTOR B DOLPHIN HILL PROVISION OF STORAGE ACCOMMODATION FOR AGE B R III GE NB AT DOLPHIN PARK

Amount

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

S&F factory made UPVC white colour three track sliding window made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm). Window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding interlock (one vertical length in each shutter) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing hardware, EPDM gasket, 1.2mm+/-0.2mm thick galvanised steel frame (30mm x 18mm) 2Nos sliding sash (30mm x 18mm) 2Nos sliding mesh sash (26mm x 10mm) profile to be inserted in required profile. Frame will be fixed to the wall with 8mm x100mm long fasteners. Hardware (touch lock of zinc alloyed (white powder coated) steel roller system, stainless stell wire cloth 0.36mm nominal dia of wire and avarage width of aperture 1.4mm and required accessories. () area n.exc 3.00 sqm fixed from ground to 3rd floors complete all as specified and as directed. Note: The unit rate excludes cost of glass and includes all other connected accessories Make:- Accucel polytech Pvt.Ltd / Prem plastofab Pvt [Polyline] Ltd / Duroplast / Accura / Madhu Industries / H2O solution

S&F Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and as directed. Make: Saint Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan Pilkington Glass / Triveni Float Glass / IAG

Complete removal of existing treatment on walls, preparing surfaces of walls applying putty two coats and sand papering till obtaining smooth surface and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All are 1st quality) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Complete removal of existing treatment on ceilings, preparing surfaces of ceilings and applying two coats of white wash on ceilings complete all as specified and as directed.

Mild steel work as in grills and gratings,.framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, etc complete all as specified and as directed

Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac].

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and removal of rubbish to out side MD land complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles 450 x 350 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:4 for complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth complete all as specified and as directed.

M&L for PCC 1:3:6 type C1, (using 20mm graded granite stone aggregate) in bed blocks etc., including necessary form work complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for preparing plastered surfaces of internal walls and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

Demolition of un-reinforced cement concrete in any floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded granite stone aggregate) as in sub base of floorings /.levelling course complete all as specified and as directed.

M&L for 5mm thick rendering in CM (1:4) on concrete surfaces using water proofing compound and finishing the surface even and fair complete all as specified and as directed. Note: WPC shall be measured and paid seperately.

Supply only integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

Supply and Fix APP polymeric waterproofing membrane of 3 Kg / Sq.M incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bitumenous Primer @ 100 gms / Sqm, followed by a coat of blown bitumen of grade 85 / 25 or 90 / 15 @ 1.2 Kg / Sqm each at top and bottom of the membrane complete including sealing all joints by thermo fusion with minimum 10cm overlap and finished with a coat of bituminous aluminum paint @ 100 grams per Sq.m on top for water proofing treatment complete all as specified and as directed. MAKE : M/S HYPERPLAS IWL CHENNAI, M/S MULTIPLAS BY STP TEXES LIMITTED, GOREGOAN, M/S STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS

M&L Terracotta tiles 10mm to 15mm thick (Elevation tiles) grooved pattern of approved design by GE and set and jointed in cement slurry and pointed with white cement and pigment to match with colour of tiles including screed bed or bedding layer in cement mortar 1:6, 15 mm thick complete all as specified and as directed. Make : Bharat Tiles & Marble Pvt Ltd / National Tiles & Industries Pvt Ltd / Nitco Tiles Pvt Ltd / Nimco Tiles Vitco Tiles Bombay / Mehtab Tiles or equivalent as approved by GE.

Dismantling of floor, hearth and wall tiles / stone slabs of any description or thickness as in floors, skirtings etc laid bedded and pointed in any mortar and removal of rubbish to out side MD land complete all as specified and as directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square / rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed or bedding layer in cement mortar 1:6, 15 mm thick complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

M&L for Vitrified ceramic tiles 10 mm thick (Square / Rectangular) polished, Light shade, area of each tile not exceeding 0.36 Sq. M, as in dado / Skirting etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and incuding rendering as in backing coat 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 complete all as specified and as directed. Make : Johnson / Nitco / Asian Granito / Varmora

M&L for Non-skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Coloured Glazed ceramic tiles 300X600X 7 mm / 450 x 350 x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:4 for complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L 18mm to 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like laid on screed bed in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:6 mixing with water proofing compound over 10mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing and finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item

M& L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed . Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

Taking down Chowkats or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed.

S&F factory made second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick, second class hard wood, Factory made plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed.

Supply anf Fix in opening Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed. Note for Item No. 33 & 34 : Make of PVC frame / shutter / ventilator shall be of make : Kumar Arch Tech Pvt. Ltd / Sintex India Ltd. / Polywood / Rajashri Plastiwood Ltd. / Marino / Hindopan

S & F 35 mm thick Factory Made Second class hard wood Glazed and skeleton shutters [without sash bars], open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 150 mm long [ ISI marked ] extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F 100 mm long [ ISI marked ] medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S&F 200 mm long [ ISI marked ] aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S & F Floor Door Stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of size 150 mm complete all as specified and as directed.

S & F Aluminium alloy anodised Sliding Door Bolt (ISI Marked) with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

M&L for preparation of new wood and wooden based surfaces of any description , over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O or Fe 310-O complete all as specified and as directed.

M&L for Powder coated aluminium frame for doors, windows / ventilators and partitions etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F powder coated aluminium sections for ventilator shutters, fixed type aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, including and deco grill and all necessary fittings complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

S&F 4.0 mm thick figured glass, pin head type, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi / Hindustan Pilkington

S&F Anodised aluminium deco grill DG-102 of 10 mm dia hexagonal channel to windows/ventilators including joining cleat for fixing and necessary fixing arrangements as required, complete all as specified and as directed. Make : Jindal / Indal / Hindalco

M&L Powder Coated aluminium three track sliding window with using standard medium weight Jindal sections, of weight not less than 0.55 Kg/m including glazing with 5mm thick sheet glass stainless steel wire cloth (1.40mm aperture and 0.63mm dia) aluminium snap beadings, decogrill DG-102 and F channel etc, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handle/locking arrangement (1No.) per shutter, complete all as specified and as directed . Make: HINDALCO /INDALCO /JINDAL

Dismantling of 100mm bore cast iron or reinforced concrete drain pipes, including fittings viz., bends, tee, jointed in cement mortar and taking out of from walls complete all as specified and as directed.

Dismantling of 75 mm bore cast iron or reinforced concrete drain pipes, including fittings viz., bends, tee, jointed in cement mortar and taking out of from walls complete all as specified and as directed.

S&F 100 mm dia Cast iron soil, waste and vent pipes in any length sand cast (ISI Marked) with or without ears, with cement joints but fixed to walls complete all as specified and as directed.

S&F 75 mm dia Cast iron soil, waste and vent pipes in any length sand cast (ISI Marked) with or without ears, with cement joints but fixed to walls complete all as specified and as directed.

S&F 100 mm Cast iron single branch without eye complete all as specified and as directed.

S&F 100 mm Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 75 mm Cast iron single branch without eye complete all as specified and as directed.

S&F 75 mm Cast iron double branch without eye complete all as specified and as directed.

S&F 75 mm Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F 75 mm dia Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Taking up or down 25 to 32 mm bore steel tubing and connections, including cleaning for Refixing or removing to store complete all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for Refixing or removing to store complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removing to store complete all as specified and as directed.

Supply and lay 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed. Make : Astral / Flow guard

Supply and lay 20 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed. Make : Astral / Flow guard

Supply and lay 25 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed. Make : Astral / Flow guard

Supply and lay 32 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed. Make : Astral / Flow guard

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. MAKE : M/S PRAYAG, M/S POLY TUF

Supply and Fix in repairs [ ISI MARKED ]10 litres capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, Ballvalve , Float Valve and handle including brackets complete all as specified and as directed . Make : SLIMLINE from PARRYWARE / HINDWARE / CERA

S & F 15 mm bore chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F in repairs 15mm bore pillar taps fancy type, Swan neck cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. M/s Hindware / Orient / Seiko / Dripless

S & F in repairs Fancy type chromium plated 15 mm bore Angle / plain Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including taking down the existing fitting complete all as specified and as directed. M/s Hindware / Orient / Seiko / Dripless

S&F in repairs 15mm dia cast copper alloy, chromium plated two way angle cocks screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed including taking down the existing fitting complete all as specified and as directed. M/s Hindware / Orient / Seiko / Dripless

S & F brass cromium plated Health faucet, standard size, complete all as specified and directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F in repairs 15mm dia bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed including taking down the existing fitting complete all as specified and as directed. M/s Hindware / Orient / Seiko / Dripless

M&L in repair vitreous china wash hand basin , white, flat back size 630x 450 mm fixed in repairs including PVC connection 600mm long and pvc waste pipe 75mm long 40mm dia., waste coupling brakets, etc. complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S&F in repairs Low density waste pipe 32 mm bore with polyethylene union and check nuts 900mm long suitable to steel sink waste complete all as specified and as directed.

Supply and Fix in repairs brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed .

M & L for complete removal of existing treatment on walls, preparation of wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint {weather proof anti fungal emulition paints} of approved make and shade over a coat of approved primer as recommended by the manufacturer including necessary scaffolding and safty precations up to required height complete all as specified and as directed. Make : (i) Weather coat paint :Apex ultima from Asian paints or equivalent / All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M & L for preparation of new plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint {weather proof anti fungal emulition paints} of approved make and shade over a coat of approved primer as recommended by the manufacturer including necessary scaffolding and safty precations up to required height complete all as specified and as directed. Make : (i) Weather coat paint :Apex ultima from Asian paints or equivalent / All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M&L for preparing plastered surfaces of internal ceiling and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make : Asian / Nerolac / Berger ( All 1st quality)

M&L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying two coat of white wash complete all as specified and as directed.

M&L for preparing old surfaces ofceilings by brooming down or by steel wire brushing and applying two coat of white wash complete all as specified and as directed.

Dismantling of water tanks exceeding 250 litres and not exceeding 500 litres capacity complete all as specified and as directed.

S&F 500 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I and 20mm dia Ball Valves of PTMT, high pressure, with polythene float and fly nut complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

Dismantling of water tanks exceeding 500 litres and not exceeding 1000 litres capacity complete all as specified and as directed.

S&F 1000 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type hoisted and fixed in position including provision of 40mm / 25mm dia spouts for connecting inlet, outlet, over flow and washout pipes fixed in position all as specified in SSR Part I and 20mm dia Ball Valves of PTMT, high pressure, with polythene float and fly nut complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S & F in repairs 25 mm bore , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball of minimum weight 455 grams, screwed for iron pipe and fixed complete all as specified and as directed.

Dismantling of water tanks not exceeding 250 litres capacity complete all as specified and as directed.

S&F PVC loft water tanks 100 ltrs capacity including transporting, fixing and hoisting complete all as specified and as directed. (Work from GF to 4th storey) Make : Sintex / Polycon / Rotex

S & F in repairs 15 mm bore , ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball of minimum weight 142 grams, screwed for iron pipe and fixed complete all as specified and as directed.

Pressure guniting of average thickness 30mm in cement mortar (1:3) for soffits of slabs, fins, facias etc, after applying NITO BOND chemical (FOSROC Chemicals Ltd.,) on the eroded concrete surfaces all as specified and directed.

S & F in repairs Stainless Steel Plate Rack of size 1050 mm X 800 mm X 250 mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and directed. Make : Blue Star / M/S JAYNA, NIRALI

S & F in repairs bath room cabinet of size 350mm x450 mm x 250mm complete all as specified and directed. Make:- Prayag, Commander.

S&F in repairs kitchen Sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm and bowl size 405 mm x 355 mm x 178 mm complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSBSD-52 / M/S JAYNA / NIRALI

S&F in repairs kitchen sinks made of stainless steel 1 mm thick with plugs, washers and wastes incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 405 mm x 355 mm x 178mm fixed complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSB-06 / M/S JAYNA / NIRALI

M&L for PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in plinth protection 75mm thick complete all as specified and as directed.

M& L for Anti Termite Treatment Treating the along the external wall below concrete or masonry apron at the rate of 2.25 ltrs of Emulsion per meter of perimeter wall complete all as specified and as directed.

Providing and injecting chemical emulsion for Post Constructional Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

M&L for ATT At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

M & L Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with with L-type or J-type or cranked hook bolts in lieu of screw in roof, wall etc complete all as specified and as directed.

S&F in repairs PVC coated MS Curtain rods 25m dia with brass decorative brackets complete all as specified and as directed.

S&F in repairs over head shower complete all as specified and as directed. MAKE : JAQUAR Cat log no. OHS-1769 or equivalent in Cera / Plumber

S & F Vitreous Ware wash down water closet (couple closet), including all necessary fittings and fixtures complete all as specified and as directed. Make of WC :M/s.Jaquar Model No.CNS-WHT-753SN Bowl for Couple Closet with normal closing model and soft closing seat cover or equivalent in Parryware / Hindware

S & F Vitreous Ware wash down water closet (couple closet), including all necessary fittings and fixtures complete all as specified and as directed. Make of WC :M/s.Jaquar Model No. SLS-WHT-6801 and pedestal SLS-WHT-6301 or equivalent in Parryware / Hindware

S & F in repairs SWAN NECK TAP for wash hand basin including all necessary fittings and fixtures complete all as specified and as directed. Make of WC :M/s.Jaquar Model No. CQT-23123 model or equivalent in Parryware / Hindware

S & F in repairs towel rack 600mm long complete all as specified and as directed. Make of WC :M/s.Jaquar Model No.AKP-CHR-35781P model or equivalent in Parryware / Hindware

S & F Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook complete all as specified and as directed. Make: Jaquar Allied range Model No.ALD-CHR-565 / Plumber / Parko / Jal

S&F Angular Stop Cock with Wall Flange complete all as specified and as directed. Make : Jaquar model OPP-15053PM / Plumber / Parko

S&F in repairs 15mm 2way Bib cock with wall flange complete all as specified and as directed. Make :Jaquar Cat. No. OPL-15041 or equivalent in Cera

S&F in repairs toilet paper holder complete all as specified and as directed. MAKE : JAQUAR Cat log no. ACN-1153 N or equivalent in Cera / Plumber

S&F in repairs corner glass shelf with bracket complete all as specified and as directed. Make : Jaguar Cat No. ACN-1173 / Dripless / Parko

S&F in repairs 3 in 1 wall mixer complete all as specified and as directed. Make : Jaguar Cat No. FLR-CHR-5281N / Dripless / Parko

Modular Kitchen (size 3680 X 2560 mm) with Kitchen cabinets, Stainless steel SS 304 Grade of “OLIVE” make utensil tray and provisions for kitchen equipment and storage sections including all fittings and fixtures with 18mm thick marine plywood confirming to IS with 1.0mm thick lamination sheet on both sides and exposed edges of Make ”MERINO LAM” (one side decorative sheet of approved shade) / 1mm thick Galvanised steel Powder coated shutters bent to shape with Bow handles and all necessary hard ware items confirmed to relevant IS complete all as shown & specified on Drawing No.GE(NB)RD.No 19/22/2019 dated 10-12-2019 all as per manufacture specification including removal of old racks complete all as specified and directed. Note:- (i) Contractor shall executed the work all as directed by Engineer-in-Charge. (ii) Any minor changes required shall be deemed to be include in the rate quoted by contractor. (iii) The colour of marine ply/madular kitchen shall be as approved by GE. Make: Godrej Interio / Harshita Enterprises/ Kumar Modular kitchen / Mahesh interiors

Cleaning of existing sewage lines of 150mm dia by rodding with split bamboo/ cleaning rods so as to clean the line blockage and allow to flow effluent to the next man hole including pumping of sewage water wherever required and removing to out side MD land complete all as specified and as directed.

M & L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil. complete all as specified and as directed.

M & L for 150 dia for Salt Glazed Stoneware Drain Pipes of Grade "A" laid in trenches and jointed ncluding taking down old pipe of any description complete all as specified and as directed.

M & L for concrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25cm thick with soils complete all as specified and as directed.

Removing Excavated spoil to a distance exceeding 1.5 KM and not exceeding 5 KM and deposited where directed complete all as specified and as directed.

Demolition of Unreinforced Cement Concrete any description and in any position not otherwise specifically provided for and and removing rubbish to out side MD land complete all as specified and as directed.

M&L for Mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4, type B1 (Using 20 mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M & L for Site clearance in soft / loose soil complete all as specified and as directed

M&L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft disintegrated rock complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in foundations including rafts, footings and mass concrete, beams; plinth beams; bases for columns, etc.; basement slabs, complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in columns, pillars, piers, posts and struts and the like complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in beams, linetels over 1.5 Metre span and the like complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix for slabs supported on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and as directed.

M&L for Reinforced Cement Concrete M 30 design mix in chajjas and like complete all as specified and as directed.

Use and waste of Fair finished flat Form work to sides of concrete foundations, rafts, plinth beams and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to faces of columns, pillars, piers and like, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to faces of beams, lintels and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

Anti termite treatment to backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

Anti termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

Anti termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M& L for Anti Termite Treatment Treating the soil along with externel peremeter of Building at the rate of 2.25 ltrs of Emulsion per meter of perimeter wall complete all as specified and as directed.

S & F 30 mm thick Factory Made Second class hard wood Glazed and skeleton shutters [with sash bars], open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. The sizes of members of shutters shall be as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and as directed.

M&L for Moorum / red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and as directed.

S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, complete all as specified and as directed. Make: Saint Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan Pilkington Glass / Triveni Float Glass / IAG

Rough Excavation not exceeding 1.5 M deep and getting out in Soft / Loose Soil complete all as specified and as directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/ rolling and finishing to required size, shape, etc., upto 9 m high from base complete all as specified and as directed.

M&L for point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) concealed / surface fitted type including Flush type metal GI boxes for fixing modular type / MS sunken box for conventional type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch. Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

All as per item No. 151 above but for one 5Amps socket on independent board including 1. 5 Sqmm earth continuty FRLS Copper Cable comlete all as specified and as directed.

All as per item No. 151 above but for one 5Amps socket on same board including 1. 5 Sqmm earth continuty FRLS Copper Cable comlete all as specified and as directed.

All as per item No. 151 above but with two runds of 2.5 Sqmm FRLS copper cable for one 15 Amps socket including 2.5 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth dolly complete all as specified and as directed.

All as per item No. 151 above but with two runds of 4.0 Sqmm FRLS copper cable for one 15 Amps, geyser/AC/ Water cooler point including 4.0 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth dolly complete all as specified and as directed.

M & L for Sub main wiring with 4 runs of 10 Sqmm PVC insulated FRLS Copper conductor cable in existing PVC conduit along with one run of 10.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note:Four runs 10 Sq.mm. cable, one run of 10 Sq.mm cable will be measured as one unit. MAKE :(i) Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 2 runs of 6 Sqmm PVC insulated FRLS Copper conductor cable in existing conduit along with one run of 6.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including taking down old submain wiring complete all as specified and as directed. Note: Two runs 6 Sq.mm. cable, one run of 6 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable in existing conduit along with one run of 4.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including taking down old submain wiring complete all as specified and as directed. Note: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 2 runs of 2.5 Sqmm PVC insulated FRLS Copper conductor cable in existing conduit along with one run of 2.5 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including taking down old submain wiring complete all as specified and as directed. Note: Two runs 2.5 Sq.mm. cable, one run of 2.5 Sq.mm cable will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

S&F Distribution Board, SPN 6 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian cat part No. 811807[Optipro] / Standard / Havells

S&F Distribution Board, SPN 8 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian cat part No. 811807[Optipro] / Standard / Havells

S & F MCB SPN 6 to 32 Amps 240 Volts C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811152 / STANDARD / HAVELLS/Schneider

S & F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811122 to 811129 / L&T / C&S / Schneider / Legrand

S & F in replacement MCB, TPN 63 Amps 415 Volts C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811218 [ Optipro] / STANDARD / HAVELLS

S & F MCB, TPN 40 Amps 415 Volts C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811218 [ Optipro] / STANDARD / HAVELLS

S&F Sheet metal enclouser single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 amps capacity complete all as specified and as directed. Make : INDO ASIAN / STANDARD / HAVELLS

S&F in repair stepped type modular fan regulator,100 W 1 module complete all as specified and as directed. Make: MK / Anchor(Roma) / ABB

S&F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F switch Modular type single pole 16 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F Bell push Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F Modular type socket 6A 2/3 Pin Combined AC 230V, 50HZ complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MKMake: MK / Legrand / ROMA / ABB

S&F Modular type socket 6 A/ 16A 2/3 Pin Combined multi purpose AC 230V, 50HZ complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MKMake: MK / Legrand / ROMA / ABB

S&F in repairs TV outlet socket with metal box complete all as specified and as directed. Make: Model No. 930132 of Indo Asian/Anchor or equivalent in Bajaj or leader or Plaza

S&F in repairs Telephone jack deluxe with shutters 2 line with metal box complete all as specified and as directed. Make: Model No. 800130 RJ11 of Indo Asian/Anchor or equivalent in Bajaj or leader or Plaza

S&F modular white cover plate with frame 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 2 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 3 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 4 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 6 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F modular white cover plate with frame 8 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F Modular metal flush box, but 1/2/3 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand/Legrand

S&F Modular metal flush box, but 4 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand/Legrand

S&F Modular metal flush box, but 6/8 module complete all as specified and as directed. Make: MK/Roma/ABB/Legrand/Legrand

S&F in repairs Bell electric, Ding Dong AC 230 Volts, single pole complete all as specified and as directed. Make : Legrand / Cona / Anchor / Bajaj

S&F CUB LED 45 W street light, pressure die cast housing with epoxy powder coated dark graphic grey colour finish prismatic poly carbonate cover with individual LED lensus IP-65 protection with all accessories including 1.5m long 40/32mm dia GI pipe bent to shape MS flat bracket mounting clamps. bolt, nuts and washers, 1 sqmm weather proof 3 core FRLS grade copper conductor to fittings including taking down existing lighting fitting complete all as specified and as directed. Make:CG cat part No. LSTS-45-CDL or equivalent in Bajaj / Surya / Havells / Philips / Wipro / GE

S&F in replacement surface batten for 1x20 Watt LED tube light with PC body all accessories internally pre wired and including connecting up with twin core twisted copper conductor cable sith suitable size of Make : CG cat pt No. IGP131LT8-16 or equivalent in Surya/Bajaj complete all as specified and as directed.

S&F in replacement LED Tube rod 20 W with retro LED T8 (PC) bar professional WH 5700K of cool white. Make : CG Cat No. LT8-20-865-2 equivalent in Surya/Bajaj complete all as specified and as directed.

S&F in replacement Sleek LED mirror light 14W with diffuser one feet version suitable for surface/wall mounting complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conducotr cable with suitable size of CG cat part no. LCL-14-CDL (LINNET) or equivalent in Havells/Bajaj/Surya complete all as specified and as directed..

S&F in replacement integrated LED Bulk Head with luminaire 10W comprises of pressure die cast housing, acrylic diffuser & frame, IP-65 protection complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conducotr cable with suitable size of Crompton cat part no.LBHP 10 CDL or equivalent in Havells/Bajaj/ Surya/Instapower complete all as specified and as directed..

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall as specified and directed by E-in-Charge complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to GI strip 25 x 4mm (up to 7.5 m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed by E-in-Charge complete all as specified and as directed.

S&F Aluminium strip of size 25x3.15 mm for lightning conductor (roof conductors)/down conductors) laid in trench/floor including necessery clamps,nuts,bolts and hylem sheet block complete all as specified and as directed.

S&F in replacement Air termination, single pointed aluminium rod 12mm dia and 300mm long and fixed complete all as specified and as directed.

S&F in replacement Test terminal box of size 175x150x100mm made out of 2mm thick hot dip galvanised sheet drilled and screwed including 4 nos 125mm long hexogonal head screwed with test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed.

M&L for point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) concealed / surface fitted type including Flush type metal GI boxes for fixing modular type / MS sunken box for conventional type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch. Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

All as per item No. 195 above but for one 5Amps socket on independent board including 1. 5 Sqmm earth continuty FRLS Copper Cable comlete all as specified and as directed.

All as per item No. 195 above but with two runs of 2.5 Sqmm FRLS copper cable for one 15 Amps point including 2.5 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth dolly complete all as specified and as directed.

S & F switch piano flush type single pole 6 Amps oneway AC 230V, 50HZ supply complete all as specified and as directed. Make : Anchor / Cona / Bajaj

S&F Switch socket combination 2 in1, 3 pin, 5 Amp flush type,universsal complete all as specified and as directed. Make : Anchor / Bajaj / Cona

S & F Switch socket combination 3 pin, 15 A flush type complete all as specified and as directed. Make : Anchor / Bajaj / Cona

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed. Make : Anchor/USHA/CONA

S&F ceiling rose surface bakelite 65 X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

Supply and fix LED Tube light fitting, retro bar professional WH 5700K to 6200K and 1800 to 2000 Lumens of cool white complete with all accessories, prewired complete all as specified and as directed. Make: HAVELLS cat No. LUMILINEBS20WLED830SPCCWH / or equivalent in BAJAJ / PHILIPS / WIPRO.

S & F MCB SPN 40 Amps 240 Volts C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811152 / STANDARD / HAVELLS/Schneider

Supply, lay, joint, test and commission of LT cable 1100 V grade, [ISI marked] FRLS XLPE insulated, Screened, PVC bedded, Galvanised strip or wire armoured and sheathed, Aluminium conductor Cable of size 2 Core, 16 Sq.mm including cable glands, lugs, jointing materials etc laid in trenches / floors / ducts complete all as specified and as directed. Make: Polycab / Universal / Nicco / Havells

Supply and spreading clean dry sand as in cable cushioning in trenches complete all as specified and as directed. (Note: Punned thickness only shall be measured)

Supply and lay un reinforced precast concrete cable covers fonfirming to IS 5820-1970 class LV Type 2 Flat of size 230 x 150 x 70mm trenches as protection to cable complete all as specified and as directed.

M&L for 18 mm thick plywood, grade BWR, type BB, fixed with 0.9mm thick decorative type laminated sheet type 1 of surface finish colour and pattern as approved by GE fixed with approved adhessive and fixed in timber frame work with nails as in partition wall panelling and cubboard shutters complete all as specified and as directed. Make : Anchor / century ply board Industries Ltd. / Archid ply / Kitply / True wood / Green ply

M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and providing with 6mm thick teakwood lipping alorund including polishing for lipping complete all as specified and as directed.

M B CONSTRUCTIONS