SJMMSVY – YEAR 2025-26

Name Of Work :- Providing, Supplying & Erecting Street Light Pole with LED Lights From Tavara Main Road To Taluka

Seva Sadan at Vaghodiya.

No Description Quantity Total Rate Per Amount

1 Supplying & erecting Steel tubular pole (Swaged) confirming

to IS - 2713 (Part-II) 1980. Manufacturing process of steel

tubular pole should be as per IS specification. Basic steel tube

should be ISI Marked. Pole should be painted by one coat of

Zinc comet Primer and two coat of Aluminium /approved

paint to be erected on / in existing Foundation. The length of

poles are as below.

(B) 8.5 mtr. Long Swaged Steel tubular pole

(i) Pole as per IS code 410-SP-16 with 300 X 300 X 4 mm base

plate with necessary G.I. J Bolts (Approximate weight 75 Kg)

For burial erection 30.00 8148.68 NO.

(ii) Add Extra for M.S. Base plate 300 X 300 X 16 mm for pole,

mounting on surface of foundation on GI foundation bolt.

with required stiffeners. 30.00 982.73 NO.

(iii) Add Extra for PU base primer and PU Paint on pole. 30.00 443.39 NO.

2 Supplying and erecting street light pole bracket comprising

main B Class GI pipe of 4.2 cm/require outside dia. complete

with suitable B Class GI sleeve tubing of approx. 45cms.length

and suitable for 76.5mm/80mm or require size pole top

having sufficient fastners for fixing the brackets and having

suitable rise as per site condition as directed and spread of

mtr.with suitable welded stiffener reducer and with lock nut

complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. Suitable for

side entry fitting brackets of following nos of arms.

[a] Single Arm bracket 2 Mtr 30.00 795.88 NO.

Supplying & erecting approved make SMC press moulded

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN rail

for mounting mob & hinged doors as per requirement having

locking arrangements with mounting clamp with nuts, bolts &

washers suitable for erection on pole with cable clamps&

earth bolt of following size of box.

(B) 250mm x 200mm x 100mm [deep] 30.00 515.10 Nos.

4 Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses,

with toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

(iii) above 60 to 90 Watts Cat III 30.00 5976.17 NO.

5 Supplying and erecting Flexible PVC insulated multistrand

multicore 1.1 kv grade ISI marked copper wires of following

size to be erected as directed.

e) 1.50 Sq.mm 3 core round PVC sheathed 660.00 31.31 Rmt.

6 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench / pipe of

following size of cables

(A) 4 core 16 Sq. mm 1380.00 153.52 Rmt.

7 Supplying and erecting B class Galvanized iron pipe having

smooth finished bore of the pipe on both ends erected nuts

and bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following.

8 Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with coupling

and buch buried in specially prepared earth pit complete with

necessary 8 SWG earth wire. 30.00 368.65 Nos.

9 For using salt and charcoal / coke as required for pipe type

earthing. 30.00 171.70 Nos.

10 Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover. (A)(approved make OEM has to submit test

certificate including value of earth resistance of installation

duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill Compound

:- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted by

(a) For Electrical Installation up to 440V in normal soil Length

of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg. 2.00 4591.46 Nos.

11 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cms or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground.

12 Making trench in Hard Murrum / Tar Road of suitable width

of 90 cm or required depth for laying any size of cable or

locating the fault all over the run and back filling the same

and making the surface as normal ground. (B) If additional

machinery like hammer driller or JCB use [Add]

13 Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at

required depth for laying of cable. below ground / road

surface for enclosing cable and back filling the same to make

ground as per original.

14 Providing and fixing Terminal board of size 5.0 x 127 x

mm.bakelite sheet with suitable brass studs with nuts,

washers and clamps of size 25mm x 3mm suitable for pole

painted with one coat of red lead paint. 30.00 146.45 Nos.

15 Providing 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 60 x 60 x

cm. Deep in below ground level with plinth of 45 cm x

cm(or 45 cm dia x 45 cm) high upper ground level with

necessary curing and finishing in approved manner. ( for

16 Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of

(B) 2 to 4 core 6 Sq. mm 120.00 38.38 Nos.

(D) 2 to 4 core 16 Sq. mm 60.00 47.47 Nos.

Solderless crimping type Aluminium lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs

made from jointless M.S. Angle with cable clamps to be

buried in ground to have appropriate erection to work

uniform until erected with cement concrete foundation and

45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is

welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with

three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP

test & followed by IS 2147 of 1962 1.00 1884.66 Nos.

(C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X

X 5 mm thick MS angle.

19 Supplying and erecting HYLAM sheet on existing angle iron

frame.for following thickness (F) 12mm 1.00 2311.89 Smt.

20 Supplying & erecting approved make Digital time switch

having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating contacts

Minimum switching setup time 1 minimum & LCD display.

Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary

connection erected as directed. 1.00 3168.37 Nos.

21 Supplying and erecting Ammeter / Voltmeter selector switch

for 3 phase AC Supply 500 V on existing panel board with

necessary connections. 1.00 317.14 Nos.

22 Supplying and erecting approved make panel mounting type

Digital Ammeter having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps suitable to operate

on 500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

certificate. 1.00 1558.43 Nos.

23 Supplying and erecting approved make panel mounting type

Digital Voltmeter having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration

certificate. 1.00 1275.63 Nos.

24 Supplying and erecting approved make suitable panel

indicator LED type lamp, lens cover, complete erected with

necessary connections. 1.00 43.43 Nos.

25 Providing & erecting L.T. Current Transformer with bar

primary 50/5 to 1000/5 ratio 15 VA burden erected in existing

CRCA box duly secured with insulating materials connected to

the meter 1.00 274.72 Nos.

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to 25 A to 100A. with

Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III 1.00 6173.12 Nos.

27 providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996 with ISI

Mark Cat.III 30.00 270.68 Nos.

Providing & erecting 415V MCB Four Pole Switch for Lighting

Load (B curve) having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity

(A) 6 to 32 Amp. Cat.III

Add 3 % Cont. & Superv. :