S.R To Washing Ramp,Parking Shed And H.M.V Shed For M.T OFFICE At Anand Dist-Anand ( Incl Electrification)

Name of Work : S.R To Washing Ramp,Parking Shed And H.M.V Shed For M.T OFFICE At Anand Dist-Anand ( Incl Electrification)

SOR 2024-25 [ ANAND ]

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for Rs.

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

1 Excavation for foundation upto 1.5 m depth including sorting out and stacking of 59.00 cmt 121.72 RS: One Hundred

useful materials and disposing off the excavated stuff upto Any lead & Lift (A) Twenty One and Paise

Seventy Two only

2 Providing & laying Cement Concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 M/C 2.00 cmt 2581.11 RS: Two Thousand Five

graded stone aggregates of 40 mm nominal size) curing complete excluding cost of

Hundred Eighty One and

formwork in FOUNDATION AND PLINTH.

Paise Eleven only

3 Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse sand; 8 29.00 cmt 2742.27 RS: Two Thousand

crushed stone aggregates 40mm nominal size) and curing complete including Seven Hundred Forty Two

cost of form work if required in foundation and plinth and Paise Twenty Seven

4 Providing and laying cement concrete 1:3:6 ( 1 cement ; 3 coarse sand; 6 crushed 2.80 cmt 3064.60 RS: Three Thousand

stone aggregates 40mm nominal size) and curing complete including cost of form work

Sixty Four and Paise Sixty

if required in foundation and plinth

5 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded 14.00 cmt 3720.41 RS: Three Thousand

stone aggregates 20 mm nominal size) and curing complete excluding cost of

Seven Hundred Twenty

formwork in (A) Foundation and Plinth

and Paise Forty One only

6 Providing & laying controlled CEMENT CONCRETE M-200 & finishing smooth 9.50 cmt 4379.20 RS: Four Thousand

with curing etc. complete. including cost of Plywood Formwork Only With fair Three Hundred Seventy

Finish but exculding the cost of reinforcement For Column Footing. Rate are

Nine and Paise Twenty

inclusive of Pro.& Mix plastisizer of approved make in proportion as Per Mix

7 Providing & laying controlled CEMENT CONCRETE of M-200 and Finishing 4.50 cmt 8636.41 RS: Eight Thousand Six

smooth with curing complete including cost of Plywood formwork Only With fair Hundred Thirty Six and

Finish but excluding the cost of reinforcement for RCC work in Column up to Paise Forty One only

plinth for any cross sectional area. Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design.

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

8 Providing & laying Controlled CEMENT CONCRETE M-200 & finishing 1.00 cmt 9649.67 RS: Nine Thousand Six

smooth with curing etc.complete. including cost of Plywood Formwork Only Hundred Forty Nine and

With fair Finish but excluding cost of reinforcement for R.C.C CHHAJJAS upto Paise Sixty Seven only

any thickness including finishing the exposed surface with cement mortar 1:3 (1

cement : 3 fine stone ) for All Floors. Rate are inclusive of Pro.& Mix

plastisizer of approved make in proportion as per prescribed by manufacture.

9 Providing & laying Controlled CEMENT CONCRETE M-200 & finishing 1.00 cmt 8723.92 RS: Eight Thousand

smooth with curing etc. complete. including cost of Plywood Formwork Only Seven Hundred Twenty

With fair Finish but excluding cost of reinforcement for Lintel at Ground Three and Paise Ninty Two

Floor.Rate are inclusive of Pro.& Mix plastisizer of approved make in proportion

as per prescribed by manufacture.

10 BRICK WORK using common burnt clay building bricks having crushing strength not 18.00 cmt 4172.60 RS: Four Thousand

less than 35 Kg./Sq. cm. In FOUNDATION AND PLINTH in cement mortar 1 : 6 ( 1 One Hundred Seventy Two

cement : 6 coarse sand ( Conventional Bricks )

and Paise Sixty only

11 Filling available excavated earth (excluding rock) in trenches. plinth, sides 25.00 cmt 135.56 RS: One Hundred

of foundations etc. in layers not exceeding 20 cm. in depth consolidating each

Thirty Five and Paise Fifty

disposited layer by ramming and watering.

12 Supplying and Filling in Foundation and Plinth with selected soil or murrum 16.00 cmt 291.47 RS: Two Hundred

in layers of 20cms. thickness including watering, ramming, consolidating and Ninty One and Paise Forty

dressing etc.complete

13 FILLING in plinth with SAND under floors including watering, raming consolidating and 51.00 cmt 477.03 RS: Four Hundred

dressing etc. complete.

Seventy Seven and Paise

14 Providing 15 mm. thick cement plaster in single coat on wall for interior plastering 105.00 smt 230.38 RS: Two Hundred

and finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a

Thirty and Paise Thirty

floating coat of neat cement slurry AT GROUND FLOOR.

15 Providing 20mm thick SAND FACED cement plaster on walls above ground level 50.00 smt 348.95 RS: Three Hundred

consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick

Forty Eight and Paise Ninty

finishing coat of C:M 1:1 (1 cement; 1 sand) etc. complete for any height.(Gukta

Plaster) Five only

16 Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick 10.00 smt 2428.00 RS: Two Thousand

for jambs and sills of doors & windows using neat cement slurry laid over 20 Four Hundred Twenty Eight

mm average base of cement mortar 1:1(1 cement:1 Coarse Sand) and jointed

with grey cement slurry including racking(Tancha Work) rubbing and

polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with base

of neat cement) as per direction of Engineer in charge including rounding

the exposed edges as directed.

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

17 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an 100.00 smt 179.92 RS: One Hundred

required shap even shade after throughly brushing the surface to remove all dirt and

Seventy Nine and Paise

remains of loose poweder material etc. complete. Rate are inclusive of applying two

coat of lapy (Putty) and one coat of primer on new wall surface to give and even shade Ninty Two only

including thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth.putty, primers and Plastic Emulsion Paint Shall Be

Used As Per approved Material List By G.S.P.H.C

18 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop 20.00 smt 193.02 RS: One Hundred

Surface (two coats) to give an required shap even shade after throughly brushing the Ninty Three and Paise Two

surface to remove all dirt and remains of loose poweder material etc. complete. Rate

are inclusive of applying two coat of lapy (Putty) and one coat of primer on new only

Ceilling/Slop Surface to give and even shade including thoroughly brushing the surface

free from mortar dropping andother foreign matter and sand papered smooth. Fine

Putty primers and Plastic Emulsion Paint Shall Be Used As Per approved Material List

19 Finishing wall with weather proof exterior emulsion paint on wall surface (two 110.00 smt 153.35 RS: One Hundred Fifty

coats) over and above applying One Coat Of Primer to give an required shape even Three and Paise Thirty Five

shade after thoroughly brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete.primers and exterior Emulsion Paint Shall Be Used only

As Per approved Material List By G.S.P.H.C

20 Providing & Fixing extrated alluminium section 15 micron regular anodized coating with 5.00 smt 4442.73 RS: Four Thousand

matt finished & excellent out door durability door with partly glazed of 5 mm clear float

Four Hundred Forty Two

glass & parlty both sides prelaminated partical board of 12 mm thick as per the detail

drawing & specification glassis of EPDM cuality shall be provided for weather tighteing and Paise Seventy Three

alongwith silicon sealant of dow corning /G.F. silicon/water germany or equivalant only

21 Providing and fixing window having extruded aluminum Colour anodized section 8.00 smt 1568.27 RS: One Thousand Five

frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of

Hundred Sixty Eight and

0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of

Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x Paise Twenty Seven only

1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

22 Brick work using common burnt clay building bricks having crushing strength not less 2.00 cmt 4451.53 RS: Four Thousand

than 35 Kg/Sq.cm.in Ground Floor in cement mortar 1:6 (1-cement;6-coarse sand), Four Hundred Fifty One and

Conventional bricks.Bricks with frog only shall be used.

Paise Fifty Three only

23 Demolition including stacking of serviceable materilas and disposal of unserviceable 5.00 cmt 1071.63 RS: One Thousand Ten

materials with all lead and lift. (i) R.C.C. work Hundred Seventy One and

Paise Sixty Three only

24 Removing dry or oil bound distemper by a washing and scraping and sand papering 100.00 smt 11.42 RS: Eleven and

the wall surface smooth including necessary repairs to scratches complete.

Paise Forty Two only

25 Demolition of Brick work and stone masonry including stacking of serviceable 4.75 cmt 557.32 RS: Five Hundred Fifty

materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement

Seven and Paise Thirty

26 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable 16.00 smt 48.63 RS: Forty Eight and

materilas and disposal of unserviceable materials with all lead and lift.

Paise Sixty Three only

27 Dismentling doors, windows, ventilators etc. (wood or steel) shutters including 8.00 Each 190.19 RS: One Hundred

chowkhats architraves, holdfasts and other attachment etc. complete and stacking

Ninty and Paise Ninteen

them within all lead and lift.(ii) Not Exceeding 3 Sq.M. in area.

28 Dismantling existing plaster racking out joints and cleaning the surface for plaster at 103.00 smt 19.69 RS: Ninteen and

all heights including disposal of rubbish to the dumping ground within of any lead.

Paise Sixty Nine only

29 Credit value for old window shutter of fully glazed and removed from site and clean 7.00 smt -50.00 RS: Mines Fifty only -350.00

30 Credit Value for Door Shutter, Cupboard shutter and removed from site and clean 5.00 smt -50.00 RS: Mines Fifty only -250.00

31 Providing,fabricating,erecting and fixing of M.S. grill fabricated from M.S.flat 177.00 Kg 75.12 RS: Seventy Five and

angles, tees, square bars, round bars, pipe etc. complete as per architectural Paise Twelve only

details including applying one coat of red oxide and two coats of oil paint of

approved shade and quality etc. complete.

32 Providing TMT Bars Fe -500/500D reinforcement for RCC work including 1740.00 Kg 76.52 RS: Seventy Six and

cutting, bending, binding and placing in position etc.complete for all Paise Fifty Two only

floors.T.M.T. shall be used as per approved material make list by GSPHCL.

33 Steel work, welded in built up sections framed work including cutting, hoisting, 23.00 Qunt 10111.03 RS: Ten Thousand One

fixing in position and Structral Steel painted by applying Two Coats of Zinc Hundred Eleven and Paise

Phosphate Primer and 2 coats of Synthetic enamel paint Conf. to IS 2933.(D) In

trussses and trussed purlins, upto 25 M. span and 15 M. ovarall height.

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

34 Providing and fixing Colour coated 0.6mm Steel Roofing sheet fixed with 136.00 smt 1022.75 RS: One Thousand Ten

required Fasteners & bolt of excluding cost of purlin rafter and truss as per Hundred Twenty Two and

enginneer charges.

Paise Seventy Five only

35 Providing and fixing UPVC Multi Nahni trap of the following nominal diameter 1.00 Nos 580.47 RS: Five Hundred

of self cleaning design with top stainless steel jali and strainer including cost of Eighty and Paise Forty

cutting and making good the walls and floor 100 mm inlet and 50 mm 3nos of

outlet.used as per approved make list by GSPHCL.

36 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste pipe 20.00 Rmt 256.81 RS: Two Hundred Fifty

with "O" ring of ISI13592/92-2013 (Reaffirmed 2018) or its relevant & latest Six and Paise Eighty One

edition &, Pipe fixing with Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp

with washer for Vertical Drain pipe, etc.complete and making good the wall

ceiling and floor. (A) 75mm dia

37 Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with Exposed 1.00 Nos 942.54 RS: Nine Hundred

Part & Other Accessories (Sleeve, Lever, Wall Flange) . Rate are inclusive of all Forty Two and Paise Fifty

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge. The Model &

Make of Concealed Heavy Stop Cock Shall be as per the Approved Make List of

38 Providing and fixing concealed or open center point to wall ceiling & floor 20mm 23.00 Rmt 206.73 RS: Two Hundred Six

Dia CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal and Paise Seventy Three

for potable water of following dia. nominal bore tube fittingswith Z patti only

(Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for Vertical water

supply pipe. Pipe shall be concealed or open as mention in tender description.

Pipe shall be used as per approved make list by GSPHCL

39 Provinding and laying inegrated cement based proofing treatment of required thickness 18.00 smt 946.09 RS: Nine Hundred

over the roof including 10mm thick waterproofing cement plaster in cement plaster in

Forty Six and Paise Nine

cement mortar1:3 and chaina mosaic fitting and finally finishing the surfase with white

cement slurry and slopping out taerrace slabs with following specification laid to only

required slope not flatter than 1:80 ( the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finishedslope shall not be less then 45mm,

including treating the vertical surfaseof the parapet wall up to 20cms . height above

finished level of terracing including finishing the top with joint less water proofing

plaster , curing , testing etc. complete. Rate is including ten years performance of

guarantee bond to be given on stamp paper. (No extra shall be paid for increase in

thickness for proper slope).

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm. of cement

admixed with properly water proofing compound conforming to IS -2645 and 10 mm

thick water proofing cement plaster in Cement mortar 1:3 over the R.C.C.slab incl.

cleaning the surface before treatment

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size with 50%

of cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick water proofing

cement plaster in cement mortar 1:3 (1 cement ,3 coarse sand) admixed with

proprietary water proofing compound conforming to IS 2645 to required slope and

treating similarly the adjoining walls up to 200mm height incl. rouding of junction of

C) After Two Days of proper curing applying a second floor of cement slurry

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint less

cement plaster of mix 1:3(1 cement :3 coarse sand )admixed with proprietary water

proofing compound conforming to IS :2645 and finally finishing the surface with trowel

with neat cement slurry

(E) The whole terrace so finished shall be flooded with water for a minimum period of

two weeks for curring for final taste

All above operation to be done in order and as directed and specified by the Engineer

40 Provinding & laying Printed Coloured 600mm x 300mm size GLAZED TILES 30.00 smt 1473.50 RS: One Thousand

6mm thick to 8mm thick in skirting, risers of steps and DADO on 10mm Four Hundred Seventy

thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed with white Three and Paise Fifty only

cement slurry. including curing etc complete for all Floors. Material shall be used

as per approved make list by GSPHCL.

41 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile 16.00 smt 1560.30 RS: One Thousand Five

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse Hundred Sixty and Paise

sand) on new surface orfixing on existing flooring by adhesive including Thirty only

dismentaling of existing flooring and material jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc. complete for all

Floors. Material shall be used as per approved make list by GSPHCL.

42 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile 2.00 smt 1445.20 RS: One Thousand

Skirting riser of Step and Dedo On 10mm Thick Cement plaster mortar 1:3 ( Four Hundred Forty Five

1 cement: 3 coarse sand) & Jointed with Colour Cement Slury including and Paise Twenty only

finised with flush pointing & cleaning the surface etc. complete for all Floors.

Material shall be used as per approved make list by GSPHCL.

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

43 Gypsum False Ceiling Providing and fixing gypsum board ceiling as per 16.00 smt 600.94 RS: Six Hundred and

manufactures' specifications incl. acrylic paint. Fixing of suspended gypsum Paise Ninty Four only

plain false ceiling by using standard company section (GYPSTEEL R), which

includes providing and fixing G.I. parameter channels of size 0.55 mm thick

having one flange of 20 mm and another flange of nylon sleeves and screws at

610 mm center. Then suspending G.I intermediate channels of size 45 mm,

mm thick fixed with two flanges of 15 mm each from the sophist at 1220 mm

center with ceiling angle of width 25 mm x 10 mm x 0.55 mm thick fixed to

sophist with G.I. cleat and steel expansion fasteners. Ceiling section of

mm. thickness having knurled web of 51.5 mm. and two flanges of 26 mm each

with lips of 10.5 mm. area then fixed to the intermediate

44 Painting sign board on Acrylic plate as directed by engineer in charge 1.00 Nos 1500.00 RS: One Thousand Five

45 Provinding & laying trimix RCC road controlled cement concrete M-300 32.00 cmt 4675.17 RS: Four Thousand Six

Including the cost of using MS Channel for maintaining C.C. road thickness on Hundred Seventy Five and

both side and applying screed vibrator machine,dewatering system device and

Paise Seventeen only

finishing smooth with floater machine curing etc. Providing & Mixing admixtures

in recommended proportions as per IS: 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge excluding of formwork reinforcement for

RCC Work in foundation & Plinth

Total Amount = A

Total Amount = A

46A Providing & erecting Point wiring with approved ISI marked 1.1 KV grade 2 X 1.5 25.00 Point 425.00 RS: Four Hundred

sq.mm. copper PVC insulted FRLS wire with 1.5 sq.mm. (green) copper PVC Twenty Five only

insulated FRLS wire for earth continuity in FIA approved ISI mark medium class

white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting fixed with

adhesive solution erected flushed on wall / ceiling along with continuous G.I.

fish.................... wire to draw wires complete with approved make 5/6 Amp. ISI

modular type switch and accessories mounted in 20 G. G.I. company fabricated

metallic / PVC / Acrylic box covered with appropriate front plate modules erected

flushed on wall / ceiling with necessary modular lamp holder / modular ceiling

rose / HD Connector as directed for open wiring (a) Light point. Cat.-II OPEN

WIRING (Make & Model approved by EIC & matching color with switch

............Length of point wiring must not increase than 10 mtr. For that necessary

switch boards and their locations must be finalised before execution by agency

otherwise payment will not be done for extra long point. (For future extention, if

required, agency has ........

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

..........to erect one higher size metal box and modular plate as per instruction of

EIC. Cost of blank plate shall be paid as per tender item) [This item include

cleaning (inside/outside) of all G.I. switch boards, electric point box, fan box,

MCBDB & box cutting plaster finishing for modular plate without any

gap](Conductor resistance should be as per IS:8130/1984)

46B For Fan Point (with 6 A. Modular type switch and two module hum free EME 9.00 Point 612.00 RS: Six Hundred

Five or more step type electronic fan regulator both having ISI mark) Cat.-II Twelve only

46C For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) 6.00 Point 455.00 RS: Four Hundred Fifty

Cat.-II Five only

46D For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having 40.00 Point 234.00 RS: Two Hundred

ISI mark ) Cat.-II Thirty Four only

47A Providing and erecting Medium Class FIA approved and ISI mark white colour 190.00 Mtr. 24.00 RS: Twenty Four

(embossed) RIGID PVC PIPES of following size complete erected with only

necessary PVC fittings & Junction boxes fixed with adhesive solution & clamps

on / in wall / ceiling along with continuous fish wire to draw mains with necessary

fittings and junction boxes for following dia. (a) 20 mm. dia.

47B For 25 mm. dia. 10.00 Mtr. 33.00 RS: Thirty Three

48A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV 70.00 Mtr. 46.00 RS: Forty Six only

grade In Existing FIA approved ISI mark medium class embossed rigid PVC

pipe with PVC fitting fixed with adhesive solution to be erected on/in brick wall /

slab along with continuous G. I. fish wire to draw mains laid in approved

manner with plastering by cement mortar & finishing the surface to match the

wall / ceiling complete .............

........with FRLS PVC insulated wire for earth continuity. (Approved ISI make

only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains with

sq.mm. FRLS copper multi stranded conductor for earthing as per standard

colour code. [conductor resistance should be as per IS:8130/1984]

48B For 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 70.00 Mtr. 62.00 RS: Sixty Two

sq.mm. FRLS copper multi stranded conductor for earthing as per standard only

colour code. [Wire must be having box packing] (Conductor resistance should

be as per IS:8130/1984 )(For Computer Point)(In Existing Pipe)

48C For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 30.00 Mtr. 120.00 RS: One Hundred

sq.mm. FRLS copper multi stranded conductor for earthing as per standard Twenty only

colour code. [Wire must be having box packing] (Conductor resistance should

be as per IS:8130/1984 ) (In Existing Pipe)

49 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with 10.00 Mtr. 37.00 RS: Thirty Seven

necessary socket, PVC bushes saddle, Check-nuts etc. complete of following only

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

50A Providing following type of Modular Type Accessories mounted with PVC / 10.00 Each 16.00 RS: Sixteen only

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. For Blank Plate Single Cat II

50B (8) Computer RJ-45 socket Cat-II 5.00 Each 139.00 RS: One Hundred

Thirty Nine only

50C (3) Two Pin/RJ-11 Telephone Socket [A] For One Gang Cat-II 2.00 Each 130.00 RS: One Hundred

50D (9) 16 Amp. SP one way switch Cat-II 2.00 Each 130.00 RS: One Hundred

50E (10) 6/16Amp. Universal socket Cat-II 2.00 Each 139.00 RS: One Hundred

Thirty Nine only

51 Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked approved 5.00 Each 499.00 RS: Four Hundred

make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) Ninty Nine only

copper PVC insulated FRLS wire for earth continuity in Exisitng FIA approved

ISI mark white colour medium class 20/25 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution erected on/in brick wall/slab along

with heavy duty .............

...........GI pressure shaddle and laid in approved manner for PVC pipe &

boxes with 16 Amp Modular type Swich and accessories mounted in 20 G. GI

company fabricated metallic/ PVC box covered with appropriate front plate

modules erected flushed with wall. (a) 16 A indicator switch & 1 No. 6/16 A

universal socket suitable for 3 pin top duly both having ISI mark . Cat-II(in

52A Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 1.00 Each 7025.00 RS: Seven Thousand

225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology Twenty Five only

earthing.Earthing electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A)(A) Earthing Electrode: outerpipe:- 88mm minimum O.D ,ISI 'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI

mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal Should

be made from inner ...............

...........pipe for that pipe must be pressed and gave rectangular shape so its

work as a terminal.The hot deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron any where. SS Nut

bolt:- 2 no.with washer suitable for 14mm dia. hole must be provided at terminal.

total minimum Weight(approx.) of earth electrodewith inside conductive .............

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

...............material minimum should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

(C) Back fill Compound :-Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 25 Kg. Necessary test

report must be submitted.

(D) Chamber and cover :-Earthing chamber should be size of

400mmX400mmX400mm depth and Cover should be heavy duty cast iron with

required size of 300mmX300mmX4mm thick.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model ...........

.............to be approved by EIC) OEM has to submit all detail & sample for

approved before supplying

Water must be poured in bore before starting earthing. Earthing value must be

measured with earth tester. Agency has to bring the earth resistance to at least

02 ohms & voltage between neutral &Earthingupto 02 volt. Agency has to

maintain earthing& its value for one year. If required. Earthing must be done in

the presence of A.E (GSPHCL)

52B For above earthing additional charges for boring in hard rock soil (by breaker) & 1.00 Each 276.00 RS: Two Hundred

filling soft soil in earth pit (certificate for soil have to given by DEE / AE along Seventy Six only

with photographs)

53 Supplying and erecting 8W led lamps with following wattage capacity of 220 to 6.00 Each 111.00 RS: One Hundred

240 voltage, minimum 15000 burning hours life, 500 V in built-surge Eleven only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 LED Lamps integral type, with PC diffuser suitable LAMP

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

54 Supplying and Erecting LED indoor fitting of approximately 4feet long with LED 17.00 Each 370.00 RS: Three Hundred

of wattage 0.2W to 0.5W assemble on single MCPCB with housing use as a Seventy only

heat sink shall be made from Aluminum extrusion having enough strength

(sample must be approved by EIC)with polycarbonate diffuser with following

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w.............

.....................(D) Rated input current : 0.2 Amp

(E) Power Factor : Min.

(F) ATHD :Max. 15%

(G) Rated Luminous flux: Min. 2420 lm

(I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80%

(K) LED life span: Min. 50000 Hrs @ L70

(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.

(M) Surge protection : Min. 2KV

(N) IP rating: IP

(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing clamp design & strength should be sufficient to hold the fitting erected

on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has

to submit 5 yrs free replacement Guarantee for complete Fixture) [Approval will

be given strictly subject to item specification]

55 providing and erecting Polycarbonate body surface mounting LED Bulk head 2.00 Each 780.00 RS: Seven Hundred

type 9 watt Lighting Fitting with electronic driver having THD<15% Eighty only

,CRI>80,P.F.>0.95 And lumen output from luminaire 800lm , IP 54 protection

,input voltage range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver

having THD > 80lm/w., -20degC to +60degC working temperature, AL frame

with Beam Angle 120deg.

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

56 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 9.00 Each 1929.00 RS: One Thousand

to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. (1) Nine Hundred Twenty Nine

Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9,

(4) Power Consumption: maximum 53W, (5) RPM: minimum 330, (6) Service

value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty premium

quality Ball bearing: Two, (9) Total Body: Top & Bottom should be alluminium,

(10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade

...........powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser:

Min. 1.5 MFD (15% Tolerence) as per IS:1709-1984, (14) Down road: up to

mtr as per site requirment, (15) Required fixing accessories, (16) 3 core

0.75 sq.mm ISI wire as per site requirment, (17) No vibration and noise due to

mechanical parts. (18) Safety wire provided by manufacturer with ceiling fan.

(Agency has to erect safey wire with ceiling fan and checked with EIC) (OEM

has to approved model as per tender specification and tested at ERDA)

57 Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe /M.S. Pipe 5.00 Rn. Mtr. 107.00 RS: One Hundred

down rod erected duly painted for fan complete with necessary 24/0.2 flat 3 Seven only

core flexible cable with earthing.The Down rod thickness,hole,locking

arrangement,construction,power coating,colour shed should be same as original

down rod brought with ceiling fan.For that agency has to give original down

road sample to fabricator and one sample down rod should be approved with

EIC .After approval given by EIC agency can use the down rod as per approved

sample.If without approval down rod will be erect on site,agency has to replace

them with own cost

58 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & 5.00 Each 98.00 RS: Ninty Eight

Nuts erected with necessary hook of 10 mm M.S. Round Bar. only

59 Providing & erecting 240 V MCB Double pole switch for Motor and inductive 1.00 Each 599.00 RS: Five Hundred

load (C curve) having 10 KA breaking capacity & confirms to IS:8828 with same Ninty Nine only

company metal box with earthing terminal having following capacity with

necessary Numbering with oil Paint by painter. For 40 Amp.( (If Required)

60 Supplying & erecting 12 mm thick backelite sheet of approved make and grade 0.30 Sq. Mtr. 2289.00 RS: Two Thousand Two

on 25 x 25 x 3 mm red oxide painted angle iron frame suitable for fixing ICDP Hundred Eighty Nine

SWITCH and energy meter (contractor shall make approved drawing of Bakelite

sheet To arrange required No. of Energy meter & ICDP switch -busbar etc. as

per Actual space available in electrical room at site)

61 Providing and erecting metallic vitrified danger notice board as per language 1.00 Each 69.00 RS: Sixty Nine

suggested by engineer incharge for MEDIUM VOLTAGE installation to be only

erected as per IS-2551.

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

62A Providing & erecting Mains with ISI marked, 1.1 KV grade electrolyte multi 10.00 Mtr. 56.00 RS: Fifty Six only

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS:694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required. For

One wire 6.00 Sq.mm (Conductor resistance should be as per IS:8130/1984 )

62B For One wire 16.00 Sq.mm (Conductor resistance should be as per 10.00 Mtr. 141.00 RS: One Hundred

IS:8130/1984 ) Forty One only

63 Providing ad erecting approved make single phase Single Door metal clad D.B. 1.00 Each 4901.00 RS: Four Thousand

as per relevant indian standards ammended upto date. Nine Hundred One only

Supplying and fixing following way single phase MCB distrubution board of

company fabricated sheet box with powder coated inside and outside after apply

seven tank chemical process of CRCA sheet cover complete with suitable

integral single piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for mounting

........MCBDB Door, Back side and Body of MCBDB must be made of 1.2 mm

thick CRCA Sheet. Manufacturer must be provided (1) IP 43 and as per IS:8623-

1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder

coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with

loose wire box, terminal connectors for all incoming and outgoing circuits, with

............suitable size FRLS PVC insulated copper conductor up to terminal

blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper

neutral link, tinned copper earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing.

For 16 Way MCBDB: Including 1 no. 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity

of 10 KA), 1 no. MCB 40 Amp. double pole switch (C curve confirms to IS:8828

having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL

suitable to operate on 240 Volt A.C. power. (6 Amp:- 4 Nos., 16 Amp:- 4 Nos. &

25 Amp: 4 Nos.)

(The DBs...........

Item Total Rate

Description Unit Amount (Rs.)

In Figure In Words

....... should be used of same company of MCB / ELCB to be used) (MCBDB

must be erected in line & level with spirit level and finish the external edge with

box cutting plaster) (Same colour MCB(SP/DP) should be used as same as

MCBDB) [Including Necessary numbering / marking on box done with red colour

radium sticker as per site requirement and instructions given by EIC on site.

Font / number size given by EIC on site as per requirement]

64 Dismantling the existing light, fan, bell, , independent plug point, wiring with 35.00 Each 1.00 RS: One only

mains of all types along with accessories etc. complete and handed over to

65 Dismantling the existing switchgears, DB and Busbar of any size complete with / 2.00 Each 7.00 RS: Seven only

without board or angle iron frame.

66 Dismantling the existing any type of indoor light fittings 20.00 Each 5.00 RS: Five only

67 Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan 10.00 Each 9.00 RS: Nine only

complete with accessories, G.I. down rod, frame etc. and making the site clear.

Total Electrical - B

Total Civil - A

Executive Engineer

Signature of Contractor Gujarat State police Housing Corp. Ltd.