Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹41.8 L+₹3.3 L (8.50%)Rejected-Finance | L2 | Rejected-Finance Not being L1 bidder | |
| 3 | L3₹42.0 L+₹3.5 L (9.02%)Rejected-Finance | L3 | Rejected-Finance Not being L1 bidder | |
| 4 | L4₹42.5 L+₹4.0 L (10.3%)Rejected-Finance | L4 | Rejected-Finance Not being L1 bidder | |
| 5 | L5₹43.0 L+₹4.4 L (11.5%)Rejected-Finance JYOTISH ROAD TEZPUR DISTT SONITPUR ASSAM 784001 | SONITPUR | ASSAM | 784001 | L5 | Rejected-Finance Not being L1 bidder |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
24 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TEZPUR
GE AF TEZPUR,PO-SALONIBARI,DISTRICT-SONITPUR,ASSAM
PROVISION OF WORKS SERVICES FOR ESTABLISHMENT OF TESTING FACILITY FOR CERTAIN TECHNICAL EQUIPMENT AT AF STN TEZPUR UNDER GE AF TEZPUR
2022_MES_568337_1
GE AF/ TEZ/8699/E8
Open Tender
Civil Works - Others
Works
180 days
TEZPUR
As Per NIT
8 documents required · 8 mandatory
₹500
GE (AF) TEZPUR
₹77,000
Yes
9 Feb 2023
10 Dec 2022
26 Dec 2022
10 Dec 2022
24 Dec 2022
19 Dec 2022
Amount
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles,complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.
Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.
Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.
Removing excavated soils to a distance not exceeding 250 Metres but not exceeding 500 Metres and depositing where directed,complete all as specified and directed.
Materials and Labour for plain cement concrete (1:2:4) Type B-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.
Supply only liquid water proofing compound all as specified
Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4),complete all as specified and directed.
Cutting openings,300 mm dia. through full brick walls built in cement mortar for provision of duct for passing through electric cables and other openings or enlarging existing openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring,removing rubbish not exceeding 50m and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required and including finishing exposed surfaces as per adjoining finishes, complete all as specified and directed.
Supply and Fix, mild steel screw bolts,purpose made, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, diameter of shank 12 to 20 mm, length of bolt not exc.30 cm long, complete all as specified and directed.
Materials and Labour for, rolled mild steel Fe 410-W (Gde-E 250) Quality 'A', in joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated),complete all as specified and directed.
Materials and Labour for,rolled mild steel plates (plain or chequered),Fe-410W (Gde E-250) Quality-B,channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment,complete all as specified and directed.
Materials and Labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,complete all as specified and directed.
Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.
Materials and Labour for 100 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding, complete all as specified and directed.
Materials and Labour for 100 mm thick plain cement concrete (1:2:4) type B2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding,complete all as specified and directed.
Materials and Labour for,polythene film, black, 200 micron laid in floors,complete all as specified and directed.
Materials and Labour for, forming contraction (dummy) joint 65 mm deep x 10mm wide filled with sealing compound Grade ‘A’, complete all as specified and directed.
Materials and Labour for,forming construction joint 150mm deep x 10mm wide filled with sealing compound Grade 'A',complete all as specified and directed.
Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions on fair faces of brick work or concrete surface in walls and finishing surface even and smooth without using extra cement,complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)
Material and Labour for preparation of new plastered surface on walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm,complete all as specified and directed.
Material and Labour for applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer on new steel and iron surface of any description,over 10 cm in width or girth, not otherwise described, including preparation of surfaces complete all as specified and directed.
Materials and Labour for reinforced concrete pipes, 450 mm bore,Class NP3, laid and jointed,complete all as specified and directed.
Materials and Labour for concrete bed to drain pipes 450 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 (using 40 mm graded aggregate) complete all as specified and directed.
Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, into and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, and including 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 16 Amps socket outlet independent,complete all as specified and directed.
Supply and Fix,ceiling rose,three terminal, PVC/polycarbonate insulated body, complete all as specified and directed.
Supply and fixing,LED lights fitting 1x 20W, 220V,AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 1.50 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn into and including PVC conduit and continuous earth wire of single core FRLSH PVC insulated, unsheathed cable 1.50 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for circuit/sub main wiring,complete all as specified and directed.
Supply and Fix,flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth,complete all as specified and directed.
Supply and Fix, flame proof, weather proof enclosure for MCB Distribution Board, Single Phase and Neutral, with incoming & outgoing terminals chamber, bus bar chamber comprising of 02(Two) Nos. copper bus bars of suitable rating,separate MCB chambers suitable for accommodating 01 (One) No MCB Single Pole and Neutral, 'C' curve 40 Amps (Incomer) and 04 (Four) Nos. of 6-32 Amp. Single Pole MCB 'C' curve (Outgoing), enclosure made of cast aluminium alloy LM6, weather proof IP65, finished inside and outside with light grey epoxy powder coating, including cable glands, terminals, hardware and mounting arrangement all as per Cat No. MCBDB/186 of Make “Sudhir” or equivalent Model of Make Crompton Greaves/ Bajaj,complete all as specified and directed. Note:- The quoted rate shall be deemed to be inclusive of the cost of MCBs.
Supply and Fix,test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw,complete all as specified and directed.
Materials and Labour for,copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground,complete all as specified and directed.
Supply,laying, jointing and testing of LT, XLPE insulated, PVC sheathed,armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of Cross sectional area 16 Sq. mm, 2 core, complete all as specified and directed.
Supply and filling in dry sand in cable trenches before and after the cables are laid, as in sand cushioning to cables complete all as specified and directed.
Supply and laying sub class ‘B’, bricks, in cable trenches, as cable protection complete all as specified and directed.
Horizontal boring of holes, under road/ pavement / hard standing etc.,not exceeding 10 Metres in length, in any type of soil, suitable for passing through upto 40 mm bore, galvanised steel tubing,complete all as specified and directed.
Supply and Laying galvanized steel tubing,40 mm bore, light grade, in trenches or fixed to poles/Walls etc, for cable/earth lead protection, complete all as specified and directed.
Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead strip 32 mm x 6 mm by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil complete all as specified and indicated on electrical plate No 3 of SSR Part –I (2009) including testing on completion.
Materials and Labour for maintenance free chemical earthing system using 04(Four) spikes 17.2mm dia, 3000mm long high tensile low carbon steel circular rod, molecularly bonded with copper on outer surface (minimum copper bonding thickness of 250 microns) meeting the requirements of Under Writers laboratories (UL) 467-2007 or latest with 250mm long copper strips of size 50X3 mm, exothermally welded on top of electrode complete including augering (boring) 100-125mm dia hole as required for electrode in any type of soil and back filling with combination of two chemical compounds (one is earth enhancing chemical compound as per IEEE 80 2000 clause 14.5d, conforming to IEC 62561-7, minimum quantity of compound use 15 Kg and second is earth enhancing back filled compound as per IEEE 80 2000 Clause 14.5(c), conforming to IEC 62561-7, min quantity of compound used 25Kg), thus minimum total qty 40 Kg per electrode i.e 160 Kg for 04 electrodes, conforming to IEEE/BS standrads including pit cover light weight made out of high quality polymer with lid made of HDG steel, including nessary testings and commissioning, complete all as specified and as directed. Notes:- (i) The work of earthing shall be carried out by authorised trained rep of OEM. (ii) The acceptable earth resistance at earth busbar/ test point shall be as per users requirement as desired by Engr-in-Charge but it should be below 01 Ohm. At certain locations, it may not be possible to achieve desired earth resistance with one electrode / pit due to higher soil resistivity,in such cases, provision of loop earthing consisting of more than one earth electrode pits shall be done. The number of pits required shall be decided based on the resistivity of soil and resistance achieved for the earth pits already installed. The distance between two successive earth electrodes shall not be less than 3 metres. (iii) The procedure mentioned here-in-before for one earth pit shall be repeated for other earth pits. (iv) Additional earth electrode pits and loop conductor shall be measured and paid seperately . (v) The quoted rate shall also be included the following elements: (a) Complete earthwork including drilling holes for electrode.(b) Earhing electrode-01(One) No Only (c) Backfilling carbon based ground enhancing compound (GEC). (d) Pit cover light weight made out of high quality polymer with lid made of HDG steel. (e) Soil suitable for agricultural purpose required for each pit (f) Copper strip as earthing lead of size 50mmx3mm, 250 mm long only, beyond 250mm, other size will be measured and paid for separately under respective item(s) in this BOQ. (g) All Labour and T&P required including testing of earth network. (vi) Testing for earth resistance shall be carried out in presence of GE and Engineerr-in-Charge. (vii) Taking out existing unserviceable earthing system complete. (viii) Original purchase vouchers for copper rod and back fill compound and manufacturer test certificate of entire quantity shall be produced by the contractor before commencement of work. (ix) The Earthing shall be carried out with Soil suitable for Agricultural purpose.
Shri A. K. Goswami
M/S Mandeep Singh
M/S N G CHOWDHURY
SHRI D. C. BISWAS
Evergreen Firm
KAILSON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .