Emergency Electrical patch Repairing of LED Glow sign board, replacement of few old aged/demaged electrical fittings/fixtures incl. allied works at the office of the Commissioner, Commercial Taxes, Siligui Zone, Paribahan Nagar Matigara, Dist. Darje

Replacement of old letter with special type of imported acrylic letter 09" height, 2'' depth & 10mm thick letter in existing ACP sheet.

S&F of LED on acrylic letter from the back side [Make: Samsung/Meanwell or eqv make] having Colour: white, life: 70k burning hours, intensity:uniform without any bright/dark patches. Visibility:100mts. At least from naked eye. Power consumpsion:1.5W per module

SITC of power supply unit of water tight gaskets fitted in stainless steel hinged door box input:100V-240V AC, 4A, 50Hz Output: 12V DC 17-20 A const power supply. [Make:philips/ samsung /Meanwell /ven/ Resang]

Supply & Delivery of 230V, 1-Ph, AC ceiling fan of follwing size incl. all accessories. (Make- Crompton / Usha / Orient) [BEE star rated] with burst-proof P2/S3 Capacitor

Sweep Size- 1200 mm (48"), Wattage ≤ 55 Watt, R.PM ≤ 350, Air Delivery ≥ 220 C.M.M

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Supply & fixing of 36W 2x2 square surface mounted LED light fittings on ceiling , Incl. connections as per direction of EIC. (Make-CG- POLARIS NIO-III LCTLSNE-36-FO-CDL or equivalent make of Phillips / Wipro/ Bajaj)

Supply & fixing of 12W Round surface mounted LED light fittings on ceiling , Incl. connections as per direction of EIC. (Make-CG- PEARL NIO-S LCLCDSPLN-R-12-CDL or equivalent make of Phillips / Wipro/ Bajaj)

S&D 220V, 50Hz 2.5mfd fan capacitor [Make: Universal/Tibcon]

upply & fixing of LED bollard light fitting (make-Crompton-Cat no. LBL SN-10-CDL or equivalent make of Philips/wipro / Bajaj on existing CC muffing, with neccy connection by 3 x1.5 sq mm cu wire.

S&F LED gate light [Make: Crompton LPTO-40-CDL or equivalent make of Phillips / Wipro/Bajaj ]

Supply & Delivery of 240V LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

14/15W LED Bulb B22/E27 Base

S&D 220V, 50Hz, 5 A, piano key type Switch [Make: Anchor /crabtrre /Legrand]

S&D 220V, 50Hz 5 A, 3 pin Piano flush type Socket [Make: Anchor /crabtrre /Legrand]

S&D 220V, 50Hz 16A Piano type Switch [Make: Anchor /crabtrre /Legrand]

S&D 220V, 50Hz 16A Piano flush type 6 pin Plug Socket [Make: Anchor /crabtrre /Legrand]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:

i) By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl.drilling holes, with bolts, nuts, washers etc.

Please Enable Macros to View BoQ information