Maintenance and Repairing work of various Municipal Party Plots in Sub Zone-3 in South West (Athwa) Zone.

NAME OF WORK :- MAINTENANCE AND REPAIRING WORK OF VARIOUS MUNICIPAL PARTY PLOTS IN SUB ZONE 3 IN

SOUTH WEST (ATHWA) ZONE, SURAT.

S.O.R. 2024-25 (without GST and with cess)

ITEM ITEM QTY. RATE PER AMOUNT IN

1 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 Mt. depth 10.00 123.13 C.M.

2 Excavation for foundation includ.sorting out & stacking of useful materials &

disposing of the excavated stuff upto 50 mt. Lead & all lift, watering etc.

Comp. (A) Loose or Soft soil

Executed With Manual Labours

(1) Up to 1.5 Mt. depth 10.00 212.52 C.M.

3 Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded stone agg. 40 2.00 2606.92 C.M.

m.m Nominal size) & curing comp. excl. cost of from work in : Foundation &

4 Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8 graded 2.00 2769.69 C.M.

stone agg. 40 mm nominal size) & curing comp. excl.cost of form work in (A)

Foundation and Plinth

5 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 3.00 3095.25 C.M.

20m.m Nominal size) &curing comp. excl. cost of form work in :(a) foundation

6 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3 graded 3.00 4250.50 C.M.

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form work but

exclu. Cost of reinforcement for reinforced concrete work in : (A) Foundation,

footing, Base of columns and Mass concrete.

7 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand: 3 graded

stone agg. 20 mm nominal size) finishing smooth curing etc. comp. Incld. Cost

of form work but excl. Cost of reinforcement for R.C.C. Work in : Up to

G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08 s.mt 2.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 9201.68 C.M.

(1)Having c/s area up to 0.08s.mt 2.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 7086.88 C.M.

8 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work 200.00 77.29 Kg.

incl. bending, binding & placing in position etc. comp. Upto G.L./P.L.

9 Brick work using common burnt clay building bricks having crushing strength 2.00 4441.11 C.M.

not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(C) Fly Ash Bricks

10 Filling available excavated earth (excluding rock) in trenches. plinth, sides of 10.00 136.92 C.M.

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

11 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. 10.00 301.78 C.M.

thickness including watering, ramming and consolidating etc. complete.

12 20mm thick sand faced cement plaster on walls upto height 10 metres above 20.00 347.42 S.M.

ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-

sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- sand) etc.

13 Providing & laying ordinary cement conn.1:1.5:3 (1cement: 1.5sand:3 graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc. comp.

Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C. Work in :

(1)Having c/s area up to 0.08 s.mt- Ground Floor 0.00 12844.32 C.M.

First Floor 0.00 12885.28 C.M.

Second Floor 0.00 12926.24 C.M.

Terrace (third) Floor 0.00 12967.19 C.M.

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt - G.F 0.00 11166.97 C.M.

First Floor 0.00 11207.92 C.M.

Second Floor 0.00 11248.88 C.M.

Terrace (third) Floor 0.00 11289.83 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 0.00 9201.68 C.M.

ITEM ITEM QTY. RATE PER AMOUNT IN

First Floor 0.00 9242.63 C.M.

Second Floor 0.00 9283.59 C.M.

Terrace (third) Floor 0.00 9324.54 C.M.

(1)Having c/s area up to 0.08s.mt- Ground Floor 0.00 9102.61 C.M.

First Floor 0.00 9143.56 C.M.

Second Floor 0.00 9184.52 C.M.

Terrace (third) Floor 0.00 9225.47 C.M.

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m - G.F 0.00 8174.41 C.M.

First Floor 0.00 8215.36 C.M.

Second Floor 0.00 8256.32 C.M.

Terrace (third) Floor 0.00 8297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 0.00 7086.88 C.M.

First Floor 0.00 7127.84 C.M.

Second Floor 0.00 7168.79 C.M.

Terrace (third) Floor 0.00 7209.75 C.M.

(2) Slabs having more than 8cm. and upto 10 cm. Th'.- G.F 0.00 7984.42 C.M.

First Floor 0.00 8025.37 C.M.

Second Floor 0.00 8066.33 C.M.

Terrace (third) Floor 0.00 8107.28 C.M.

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.- G.F. 0.00 7396.96 C.M.

First Floor 0.00 7437.92 C.M.

Second Floor 0.00 7478.87 C.M.

Terrace (third) Floor 0.00 7519.83 C.M.

(4) Slabs having more than 13 cm. Thickness -- G.F 0.00 6813.01 C.M.

First Floor 0.00 6853.96 C.M.

Second Floor 0.00 6894.92 C.M.

Terrace (third) Floor 0.00 6935.87 C.M.

(D) LINTELS: -- G.F 0.00 9982.37 C.M.

First Floor 0.00 10023.32 C.M.

Second Floor 0.00 10064.28 C.M.

Terrace (third) Floor 0.00 10105.23 C.M.

(E) CHAJJAS: -- G.F 0.00 5576.81 C.M.

First Floor 0.00 5617.76 C.M.

Second Floor 0.00 5658.72 C.M.

Terrace (third) Floor 0.00 5699.67 C.M.

14 Providing & laying ordinary cement on.1:1.5:3 (1cement:1.5sand: 3 graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc. comp.

Incl.. Cost of form work but excl. Cost of reinforcement for R.C.C. Work in :

(A) Stair cases including landings etc.

Ground Floor 0.00 7698.11 C.M.

First Floor 0.00 7739.06 C.M.

Second Floor 0.00 7780.02 C.M.

Terrace (third) Floor 0.00 7820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 0.00 11613.07 C.M.

First Floor 0.00 11654.03 C.M.

Second Floor 0.00 11694.99 C.M.

Terrace (third) Floor 0.00 11735.94 C.M.

15 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for R.C.C. 200.00 77.29 Kg.

work incl. bending, binding & placing in position etc.comp.---Ground Floor

First Floor 0.00 78.34 Kg.

Second Floor 0.00 79.39 Kg.

Terrace (third) Floor 0.00 80.44 Kg.

16 Brick work using common burnt clay building bricks having crushing strength 50.00 4729.83 C.M.

not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine

sand)(C) Fly Ash Bricks

First Floor 10.00 5018.55 C.M.

Second Floor 0.00 5307.27 C.M.

Terrace (third) Floor 0.00 5595.99 C.M.

17 Half brick masonry in common brunt clay building bricks having crushing 0.00 551.00 S.M.

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -

coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 10.00 712.81 S.M.

First Floor 5.00 719.37 S.M.

Second Floor 0.00 725.94 S.M.

ITEM ITEM QTY. RATE PER AMOUNT IN

Terrace (third) Floor 0.00 732.50 S.M.

18 Uncoursed rubble masonary with hard stone of approved quality in 0.00 2586.61 C.M.

foundations and plinth in cement mortar 1:6 (1 Cement : 6 sand) including

leveling up etc. complete.

19 Providing Rubble Pitching with hard stone of approved quality in 0.00 2550.00 C.M.

cement mortar 1:6 (1 Cement : 6 Coarse sand) including leveling up

,Curing etc. complete excluding pointing

20 Providing and filling rubbles including hand packing and filling interstices with 0.00 1094.11 C.M.

quarry spalls behind abutments and between returns as directed.

21 Providing & Applying 10mm.th.cement plaster in single coat on brick/ 30.00 199.28 S.M.

concrete walls similar surfaces for plastering & finished even & smooth with a

floating coat of cement slurry mixed with admixture of lime or neeru in

required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall

and similar surfaces -- Ground Floor

First Floor 0.00 228.84 S.M.

Second Floor 0.00 258.39 S.M.

Terrace (third) Floor 0.00 287.94 S.M.

(B) For ceilings &soffits of stairs

Ground Floor 0.00 225.34 S.M.

First Floor 5.00 254.89 S.M.

Second Floor 0.00 284.45 S.M.

Terrace (third) Floor 0.00 314.00 S.M.

22 Providing & Applying 15mm.th.cement plaster in single coat on brick/ 0.00 249.39 S.M.

concrete walls similar surfaces for plastering & finished even & smooth with a

floating coat of cement slurry mixed with admixture of lime or neeru in

required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall

and similar surfaces -- Ground Floor

23 20mm thick sand faced cement plaster on walls for height more than 10 40.00 347.42 S.M.

metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- sand)

24 Providing 20 mm thick double coat mala cement plaster on brick / concrete 30.00 286.10 S.M.

work for plastering comprising of base coat 12 mm thick cement plaster

in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete.

25 Providing & Applying 20mm. Th. Heavy Roller plaster on walls or 20.00 324.00 S.M.

similar surfaces at all floor levels consisting of 12 mm av. Th. Backing coat of

C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M. 1:1 (1

cement: 1 sand) apply thick cement slurry and apply roller horizontal as well as

vartical ( two times ) up to good quality and size of grain in elevation as per

directed by engineer incharge.

26 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. 10.00 43.74 R.M.

comp.. For all floor

27 Providing 20 mm deep finished groove in plaster in line and level etc. 10.00 50.00 R.M.

Comp. For all Floor (M.R.)

28 Providing and laying precast terrazo tile 20mm thick white, black, white 20.00 647.25 S.M.

and black (or of the colour specified in specification of tender item) marble chips

of sizes upto 6mm laid in floors, treads of steps and landings on a bed of 25mm

average thickness of Lime mortar 1:1.5(1-Lime putty : 1.5 coarse sand) or

C.M. 1:6 (1:cement :6 - coarse sand) jointed with neat cement slurry mixed with

pigment to match the shade of tiles including rubbing and polishing complete

with precast tiles of.(A) Light shades using white cement

29 Providing and laying polished Kota stone slab flooring over 20mm (Average) 20.00 1019.39 S.M.

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

30 Providing and laying polished kota stone slab 25mm thick in risers of 20.00 1130.79 S.M.

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

31 Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, 30.00 900.29 S.M.

Jhonson,Nitco,Somani ,Bell make at all floor levels, in flooring, treads of

steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand)

finished with flush pointing in white cement etc.com. For all floors

ITEM ITEM QTY. RATE PER AMOUNT IN

32 Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, 30.00 932.02 S.M.

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of steps &

dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary cement

paste for fixing and joined with white cement slurry etc. complete. For all floors

33 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and 30.00 960.42 S.M.

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand

) finishing with flush pointing in white cement.

34 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps 30.00 1037.25 S.M.

and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry

35 Providing & laying marble stone slab flooring over 20 mm.av. base of 0.00 2246.54 S.M.

C.M.1:6 (1 cement : 6 coarse sand) & jointed with grey cement slurry incl.

rubbing & polishing comp.(A) Marble slab 25 mm. Thick.

36 Providing & laying granite slab 18mm thick in flooring, treads of steps 0.00 2410.00 S.M.

and landing laid on bed of 20mm thick cement mortar 1:6 (1 Cement :

6 coarse sand) or lime mortar 1:1.5 laid and finished with flush pointing in white

or colour cement including rubbing and polishing complete. ( Basic Rate:-

37 Providing & laying granite slab 18mm thick in skirting, risers of steps, 0.00 2449.00 S.M.

dedo and pillars laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) and finished with flush pointing in white or colour cement

including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

38 Providing & laying granite slab 18mm thick in Window-Door seal Frame 10.00 2026.00 S.M.

Etc laid on 10mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) with

nessary adhesive material and finished with flush pointing in white or colour

cement, including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

39 Labour Charges For Edge Finished For Granite 15.00 43.43 R.M.

40 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, 15.00 1467.72 S.M.

Jhonson, Nitco, Somani, Bell, Asian or Euro make in flooring,treads of

steps & Landing laid on bed of 20 mm (Average) base of cement mortar

1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on existing

flooring by adhesive material including dismentaling of existing flooring and

jointed with colour cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24"

For Antiskid tiles

41 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring 15.00 1092.37 Sqm.

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) finishing with flush pointing in white cement.

42 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers 15.00 1135.80 Sqm.

of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand)

and jointed with white cement slurry.

43 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in flooring 0.00 1531.82 Sqm.

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) finishing with flush pointing in white cement.

44 Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36" in skrting risers 0.00 1592.40 Sqm.

of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand)

and jointed with white cement slurry.

45 Providing and laying chequered precast concrete tiles 22mm thick with 25.00 545.76 S.M.

aggregate of sizes upto 6mm in floors treads of steps and landing on 20mm thick

bed of C.M. 1:6 (1 cement : 6 sand) or L.M. 1:1.5 (1 Lime putty :

sand) jointed with neat cement slurry with pigments to match the shade of the

46 Providing and laying rough chiseled dressed stone flooring over 20mm 0.00 576.79 S.M.

thick base of cement mortar 1:5 (1 cement : 5 coarse sand) or L.M. 1:1.5

including pointing with cement mortar 1:2 (1 cement : 2 stone dust) etc.

47 Providing and laying cement concrete flooring 1:2:4 (1 cement : 2 course sand

: 4 graded stone aggregate 20mm nominal size) laid in one layer finished

with a floating coat of neat cement

(A) 40mm thick 10.00 319.03 S.M.

(B) 50mm thick 0.00 374.14 S.M.

48 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face 5.00 3720.00 S.M.

water proof Ply Vennered & 1.5 mm th.laminate shall be pasted on both

side with adhesives as specified by the manufacturers. The laminate shall be as

per approved shade & texture, of make incl. Sal wood frames of finished size

12cm x 7cm.incl. S.S. Hinges with nessary screws & Anodized

aluminum fixtures & fastenings For all Floor

49 Same as Above But Without Frame 5.00 2520.00 S.M.

ITEM ITEM QTY. RATE PER AMOUNT IN

50 Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows & 5.00 5533.68 S.M.

clearstory windows incl. Indian teak wood frames of finished size 12cm x

7cm.incl. anodized aluminum fixtures & fastenings incl. Primer coat of

approved quality & two coats of oil painting etc. For all Floor (A) Fully Panelled

(B) Partly Panelled and Partely Galzed 1.00 5185.03 S.M.

(C) Fully Galzed 1.00 4836.39 S.M.

51 Providing and fixing 35mm thick shutters for Doors, windows and 1.00 4101.06 S.M.

clearstory windows including anodised alluminium butt hinges with

necessary screws.

52 Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP 15.00 2019.98 S.M.

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam done in situ along with

embedded wooden pieces for stiffening & also taking hinges & fixtures. The

whole FRP frame & shutter is to be water proof weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges with

fastener sleeve & alluminium fixtures & fastentings.

53 Providing & fixing M.S.Grills of required pattern to wooden frames of windows 300.00 104.20 Kg.

etc. At all floor levels with M.S. flats at required spacing & frame around

square or round bars with round headed bolts & round headed bolts and nuts or

by screws incl. Priming coat of Red lead paint etc. comp. (A) Plain grill For all

54 Providing & fixing in position collapsible steel shutters with vertical channels 50.00 6158.35 S.M.

20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size with top

& bottom rails of T-iron 40x40x6mm. with 38mm dia. steel pulleys comp.

with bolts, locking arrangements, stoppers, handles incl. applying a priming coat

of Redlead paint etc. comp.

55 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe 9.00 135.47 Each

with hooked ends to RCC slabs curing, layig including painting the

exposed portion of loops, all as per standard design complete.

56 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing,

centering, vibrating, curing & mixed with approved water proofing cement

compound or "CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg. cement bag

shall be as recommended by the manufacture of the water proofing

material, concrete work for top, bottom slab & side pardi for Under

ground Tank & Item incl. Necessary excavation & refilling the available

earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside

wall, inside R.C.C. pardi as per design, 10mm.th. water proofing cement plaster

in C.M. 1:3 with smooth finishing,watering etc.Comp.to all inner face &

bottom of tank curing etc. comp. incl. Locking arrangement, outlet, inlet,

overflow & wash out pipe arrangement as necessary & C.I. Cover 0.60 x .045

weight not less then 35kg. etc. com. as per structural drawing excluding Steel &

as directed by Engineer- in-charge

Underground tank 10000.00 6.87 Lit.

57 Providing and filling in depressions of Bath and W.C. At all floor levels, after 10.00 500.00 C.M.

completing plumbing work of pans, pipes,traps etc.with cinder or fly ash as

directed by Engineer in charge etc. comp..

58 NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed proforma

duly stamped (2) The rate shall include for work at all floors & conducting

(A) Providing and laying water proofing treatment to vertical and horizontal 10.00 296.00 S.M.

surfaces of depressed portions of W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS : 2645 in recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the depression & about

18mm th' On the side walls of the depression up to the floor level, water

proofing plaster about 18 mm. th' be continued on the walls above the floor level

for a height of 600 mm. with surface suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement consumption

0.316 Bags / S.M.)

ITEM ITEM QTY. RATE PER AMOUNT IN

(B) Providing and laying integral cement based water proofing treatment 20.00 511.00 S.M.

including preparation of surface as required for treatment of roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645 ,brick bats is finally

covered by jointless cement plaster 20mm th. in C.M. 1:4 added with special

water proofing compound confirming to IS:2645 & top smooth finished with

trowel with false chequered marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other adjoining wall up to height of

about 300 mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to be down

in order and as directed and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as 65 mm. (Cement

consumption 0.511 Bags / S.M.)

59 Proiding & laying water proofing treatment to vertical and horizontal surfaces 10.00 505.00 S.M.

like consisting of (a) I course of applying cement slurry 4.4 kg per sq.mt. mixed

with water proofing compound confirming to IS:2645 in rcommended

proportions. (b) II corse of 20mm cement plaster 1:3 mixed with water proofing

compound in recommended proportion (c) III course of applying blown or /

resideal bitumen applied hot at 1.7 kg per sqm of area. (d) IV course of 400mm

micron th. PVC sheet. (Overlaps at joints of PVC sheet should be 200mm wide

and pasted to each other with bitumen about 1.7 kg./ sqm.)

60 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 10.00 101.91 No.

61 Providing & fixing at all floor levels,both face polished machine cut edge 10.00 900.00 S.M.

green kota stone slab (30mm) for urinal partition joined with grey cement

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)

62 Providing & fixing at all floor levels,both face polished machine cut edge 10.00 1050.00 S.M.

Marble slab for urinal partition joined with grey/White cement slurry

(1:1) incl. Rubbing & polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

63 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor 5.00 1471.41 No.

levels, size 580mm incl. 100 mm size "P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1

fine sand) etc. Comp.(A) Vitreous china long pattern of approved colour

64 Providing and fixing Wash Down Water closet European type W.C. pan with 5.00 1356.81 Each

integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1

(1 cement : 1 find sand) (seat and cover to be measured and paid for

separately) (A) Viterous china pattern - I (i) in approved colour

65 Providing and fixing plastic seat and cover for wash down water closet with 5.00 291.33 Each

C.P. brass hinges and rubber buffers (B) Plastic seat and cover.

66 Providing & fixing wash basin with single hole for pillar tap at all floor levels, 5.00 2132.94 No.

with C.I. or M.S. Brackets painted white incl. cutting holes & making good the

same incl. fittings such as pillar tap, capstan head screw down high pressure

with screws, shanks & back nuts, C.P. Brass waste trap, screw down stop tap

15 mm. dia. etc. complete. (A) Vitreous china flat back wash basin 550 mm.x

400 mm. size in approved colour For all Floor

67 Providing & fixing Urinal or approved quality including conecting the Urinal 5.00 1074.86 Each

with waste pipe, tap etc. complete. (A) White earthenware flat back or corner

type size 430 mm x 260mm x 350mm

68 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all 5.00 859.41 No.

floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed to

wooden plugs with C.P.brass screws and washers etc. For all Floor

69 Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass

screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat. No.: 1.00 1457.97 NO.

F650003, Jaquar FLR-5011N

70 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare 1.00 1353.77 NO.

F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

71 Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

ITEM ITEM QTY. RATE PER AMOUNT IN

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.: 1.00 1828.81 NO.

F530004, Jaquar FLR-5041N

72 Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 , Parry 1.00 2056.47 NO.

ware T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED BODY ALD-

081,HindWare F280052 & CONCEALED STOP COCK F850105

73 Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper

connecting pipe 450 mm long and nuts, washer and brass flange complete,

including cutting and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.: 1.00 1564.37 NO.

F440020 F850094, jaquar CON 053 KN

74 Providing and fixing Wash Down Water closet European type W.C. pan with

integral P or S trap with normal closing seat cover L bend ncluding jointing the

trap with soil pipe in cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous

china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278, 1.00 3530.09 NO.

HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ

75 Providing & fixing Wash Hung basin with single hole for pillar tap , Size-

x 400 mm at all floor levels, with C.I. or M.S. Brackets painted white incl.

cutting holes & making good the same etc.

complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar 1.00 3276.63 NO.

SLS- WHT -6801 ,HindWare10004

76 Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-

2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P. spreader,32mm dia CP

bottle trap and pipe to wall with C.P. flange complete including cutting and

making good the walls and floors

wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT 13261H 1.00 2535.70 NO.

,HindWare BACK SMALL

77 Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989 , HindWareCat. No.: 1.00 1526.42 NO.

78 Providing and fixing Towel Ring fabricated from seamless stainless steel tube

2mm thick in bath room with polished wall flange at end of bars with heavy duty

anchor fasteners & accessories.

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua ACN- 1121N 1.00 924.24 NO.

,HindWare F880007

79 Providing & fixing S.S.towel rail of 600 mm long approved make including,

providing & fixing C.P. brass screws, making holes in walls & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar 1111BSM 1.00 1100.42 NO.

,HindWare F880005T

80 Providing & Fixing stainless steel recessed type Soap dish of approved make.

Including providing & fixing screws, washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N 1.00 839.91 NO.

,HindWare F880011

81 Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor

levels, size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for water closet

squatting pan joining the trap with the pan & soil pipe in C.M. 1:1 (1cement :1

fine sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar 1.00 3277.39 NO.

82 Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

chrome plated PVC Hose Pipe.

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587 1.00 1009.90 NO.

,HindWare F160109

83 Providing & fixing white vitreous china Ladies urinal of size 470 x360X100 mm

and 15mm dia. C.P. spreader, and pipe to wall complete including cutting and

making good the walls and floors

wherever required.

Make- Cera4040101, Parry ware C0503, Hindware 60003 1.00 2316.05 NO.

84 Providing & fixing Paper holder with flap guard of 150 mm long

approved make including, fixing C.P. brass screws, making holes in walls &

Make- Cera f5002110, Parry ware T6005A1, Jaquar AHS-1551 1.00 1751.51 NO.

,HindWare F890003

ITEM ITEM QTY. RATE PER AMOUNT IN

85 Providing & Fixing pressmatic bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F9020151, Parry ware G2056A1 , Jaquar PRS-043 1.00 1842.06 NO.

,HindWare F310016

86 Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-1089NSQ, 1.00 3500.99 NO.

HindWare F860075

87 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-5347N 1.00 1785.90 NO.

,HindWare F650013

88 Providing & Fixing C.P. Brass screw down bib tap at all floor levels, polished 25.00 1785.90 NO.

bright etc. comp.-(A) 15mm dia. For all Floors

89 Providing & Fixing gun metal check or non return full way wheel valve at all 25.00 186.83 NO.

floors levels, etc. complete. (A) 15 mm. dia.

90 Providing & Fixing chromium plated brass half turn flush cock at all 20.00 263.77 NO.

floor levels, of approved quality incl. fixing in pipe line etc. Comp.-- 25 mm dia.

91 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary 5.00 1292.19 NO.

(C.M 1:5) chamber & water tight C.I. cover with frame of

300mmx300mm size (inside) with weight includ. plastering smooth inside

& outside 15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps---(A)

(B) 150mm x 100mm Size- P Type 5.00 1246.92 NO.

92 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary 5.00 1098.48 NO.

(C.M 1:5)chamber & water tight Pre cast R.C.C. cover of 300mmx300mm

size (inside) includ. plastering smooth inside & outside 15mm. th' in C.M.1:3

etc.comp. (i) Square mouth traps---(A) 300mm x 300mm Size -P type

(B) 150mm x 100mm Size- P Type 5.00 1052.77 NO.

93 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 5.00 3166.77 NO.

610 mm & 450 mm deep sewer trap chamber with 23 cm th' B.B. masonary

walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 5.00 2915.61 NO.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 233.85 Each

94 Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 5.00 2932.93 No.

1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. Inside dimension,455 x

mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 5.00 2681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 242.39 Each

95 Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of

following nominal internal diameters incl. Testing of pipes and joints etc.

96 Providing & laying in trenches galvanised mild steel tubes (medium grade) 0.00 282.98 R.M.

TATA / ZENITH / ASIAN / JINDAL MAKE of the following nominal bore &

tube fittings etc. comp..- 25mm.dia.

97 Providing & Fixing to wall, ceiling floor at all floor levels, galvanised mild 0.00 252.49 R.M.

steel tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL MAKE of the

following nominal bore, tube, fittings & clamps incl. making good the wall

ceiling and floor etc. complete.

(A) 15 mm. dia.

98 Providing & Fixing abonite ball cock of approved qualities directed etc. 20.00 102.91 No.

comp. (A) 25 mm. dia.

99 Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt. Size 10.00 958.17 No.

having weight not less than 35 Kg. etc. complete.

ITEM ITEM QTY. RATE PER AMOUNT IN

100 Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") 15.00 412.00 R.M.

of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for soil and waste

discharge system at all floor levels incl. All fixtures like bends, tees, shoe etc.

jointed with resin of approved brand & manufacture etc. comp. (M.R.) (a)

101 Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type 25.00 203.00 R.M.

"A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain water

at all floor levels incl. fixtures like bends, tees, shoe etc joined with resin

brand & manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

102 Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line

of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including fittings

make or equivalent as approved by angineer-in-charge. Pipe shall be fixed on

the wall the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all materials.

103 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/

Tulsi/Finolex make for water supply line at all floor levels incl. fixtures

like bends, tees, shoe etc joined with resin of approved brand & manufacture etc.

comp. Pipe shall be fixed on the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.

104 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm 5.00 586.27 NO

diameter with jali of the following nominal diameter of self cleaning design with

C.I. scread down or hinged grating including the cost of cutting and making good

105 Providing & Fixing in position PVC Cowl vent to pipes of 5.00 40.00 NO

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. (A) 75 mm. dia.

106 Providing & fixing M.S. Holder Bat clamps at all floor levels of 5.00 30.00 No.

approved design to C.I. Or S.C.I pipes including the cost of cutting holes

& making good the wall etc. Complete - 100 mm. dia. (M.R.)

107 Providing & fixing G.I./Aluminum Patti clamps at all floor levels of approved 10.00 20.00 No.

design to C.I. Or S.C.I pipes including the cost of cutting holes &

making good the wall etc. Complete - 100 mm. dia. (M.R.)

108 Providing erecting and fixing double coated Sintex/Super/Reno PVC (ISI) 5000.00 3.95 Lit.

mark water tank of required capacity each with all necessary fittings &

connection etc. complete on terrace.

109 Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1 cement :3 coarse

sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 0.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 0.00 180.00 R.M.

110 Boring holes 3.5 mt.deep in ordinary soil (for cast in situ piles) & disposal of the

surplus excavated soil as directed within a lead of 50 M. For following diameter

ITEM ITEM QTY. RATE PER AMOUNT IN

111 Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg. 10.00 3741.69 C.M.

20 mm nominal size)& curing comp. Includ.cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A) Foundation, footing,

Base of columns and Mass concrete.

112 Providing & laying ordinary cement con.1:2:4 (1cement:2sand:

graded stone agg. 20 mm nominal size) finishing smooth curing etc. comp.

Incld. Cost of form work but excl. Cost of reinforcement for R.C.C. Work in :Up

to G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08s.mt 2.00 12335.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 10658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 8692.87 C.M.

(1)Having c/s area up to 0.08s.mt 5.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 7665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 6578.07 C.M.

113 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 3.00 4085.83 C.M.

m.m Nominal size)& curing comp. incl. cost of from work in: wall caps/

114 Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates 3.00 9108.48 Qtl.

or angle cleats as in main & cross beams,hip & trussed purlins connected

to common raffers & the like.

(B)For work like chain link fencing, above compound wall etc. 0.00 9108.48 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 0.00 10197.11 Qtl.

115 Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage thick 10.00 311.00 SM

with nuts, bolts, washer or G.I. pins, excluding M.S. angles etc.complete as per

relevent IS specification & directed by engineer in charge. (TATA or Jindal

116 Providing and fixing and fitting TATA or Jindal make G.I. barbed wire fencing 10.00 125.00 Kg.

with necessary barbed wire (12 x 14 guage, weight not less than 0.14 kg. / mt.)

pins, hooks, excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge

117 Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated 20.00 999.00 S.M.

sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L hook bolts and

bolt 8mm dia with bituman and impet washer filled with white lead etc.

Excluding the cost of purlins rafter and trusses. (Tata / Jindal or equivalent)

118 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J 10.00 734.19 S.M.

or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or

G.I. limpet washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses. (1) 0.80 mm thick sheet. (Tata / Jindal or

119 Providing corrugated G.I. Sheets of class-3 roofing fixed with glavanished iron J 10.00 1016.00 S.M.

or L Hooks, Bolts and nuts 8m diameter with bitumen and G.I. limpet washer or

G.I. limpet washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal or

120 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. 10.00 581.32 R.M.

sheet class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts,

washers etc. including marking necessary connection with rain water pipes.

(i) 0.8 mm thick

121 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" 10.00 664.70 R.M.

of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer

complete (1) 0.80 mm thick

122 Providing & fixing 150mm wide 450mm over all semicircular plain G.I. 10.00 412.00 R.M.

sheet class-3 gutter with iron brackets 40mm x 3mm size bolts, nuts,

washers etc. including marking necessary connection with rain water pipes.

(i) 0.63mm thick

123 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with G.I. "J" 0.00 464.00 R.M.

of "L" hooks bolts and nuts 8mm dia G.I. limpet and bitumen washer

complete (1) 0.63mm thick sheet

124 Providing, supplying & placing precast RCC Woodeny benches as per given 0.00 3927.00 Nos.

specifications. (Seating plank dimensions : Seating Length of the Bench :

mm, Seating width of the Bench : 450 mm, Seating height of the Bench :

mm, Seating plank thickness : 60 mm, Total height of the Bench : 900 mm. )

ITEM ITEM QTY. RATE PER AMOUNT IN

M-30 grade of Concrete using vibration compaction process. Benches

consists of 2 Nos. L-shape base support in wooden texture and 1 Nos. flate back

and 1 Nos. bottom plank leg thickness :90 mm, Leg hight : 830 mm, Leg width :

600 mm, backside plank width : 350 mm, backside plank length :

mm, backside plank thickness : 60 mm.

Bench top and back planks are treated with special anticorrosive, water proof

coating, prevent sun, rain, light and fungal attack, as to make surfaces glossy and

The back rest should show as details given by SMC in embossed at casting time.

125 Providing & Fixing UV stabilise FRP Sheet roofing with overlapping the main

cladding on both edges. All fixing holes must be predrilled oversize as specified

for the sheet length and fastener being used. Fasteners must be fitted with

approved washers. Fixings should be tightened to ensure a weatherproof seal but

they must not be over tightened Side-lap fasteners must also be installed at

specified centers with the FRP sheet having clearance holes provided as per the

main fasteners Weatherproofing shall be provided at all flashing points under the

normal flashing by the fitting of a foam closure strip to match the profile being

used. Closure strips will be sealed to the sheet with an appropriate non setting

silicone sealant. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick 10.00 992.00 SM

(b) 2 mm thick 5.00 1100.00 SM

126 Providing & Fixing Polycarbonate sheet roofing with surface of the sheet is

coated with an anti-UV Co-extrusion layer having good weather resistance, it can

maintain its optical properties and mechanical performance for a long time.

Fasting is usually done by screws. , The fastening screws should be inserted

about 500 mm apart and 300mm apart Along the supporting internal purlin and

edge pulin.All fixing holes with diameter at least 2 mm larger than screw must be

predrilled into each screw location. The screws should be 6mm diameter with

length according to sheet thickness and corrosion resistant, with at least heavy

duty hot dripped galvanized or stainless steel. Excluding the cost of purlins rafter

(a) 1.5 mm thick Solid Sheet 10.00 1261.00 SM

(b) 2 mm thick Solid Sheet 5.00 1510.00 SM

127 Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 0.00 750.00 R.M.

concrete also horizontaly in line and connecting to purline angle etc by welding

rereting etc. (a) Medium duty "B" Class

128 Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in 1:1.5:3 0.00 485.00 R.M.

concrete also horizontaly in line and connecting to purline angle etc by welding

rereting etc. (a) Medium duty "B" Class

129 Providing & fixing black board on walls of 1.8mt.x1.2mt size made up to 12 0.00 4193.00 NO.

mmth.B.W.P .Plywood (Brand Saras, Kitply,Uniply, Anchor, Green,Wood

Stock or century) fixed with teak wood beading of 65 mmx 50mm size, rubbing

& sanding comp., incl. applying two coats of black board paint over a priming

coat on plywood & French polishing the frame all round etc. Comp. as

per instruction of Engineer in charge (M.R.)

130 Providing & fixing Green board on walls of 1.8mt.x1.2mt size made up to 18 0.00 5195.00 NO.

mm th.ply (using IS 710 Marin ply) with 1 mm thick outside green board

& 0.8mm backside white laminate & with good Quality of adhesive

with appropriate fittings of Alluminium fittings or teak wood bedding 65 mmx

50mm size, rubbing & sanding comp., as per instruction of Engineer in charge

131 Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm thick 0.00 4230.00 NO.

with appropriate fittings and Alluminium fittings comp., as per instruction

of Engineer in charge (M.R.)

132 Providing & Fixing Reading table size 8' x 4' and height 2'-6" with table top 0.00 14774.00 NO.

18mm thick (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century)

commercial plywood with 1.0mm thick lamination sheet fitting with teakwood

moulding table top supported on 3" x 3" teakwood leg & 3" x 11/2" teakwood

framing top and bottom with french polish labour work hardware etc. as per site

in charge instruction and as per drawing.

133 Providing & Fixing Librarian table with 18mm thick commercial plywood 0.00 8390.00 NO.

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) )with

1.0mm thick lamination sheet table top supported on 2" x 2" teakwood leg &

make 3 nos. drawers of 1' 3" width on both side with necessary french polish

hardware labour etc. as per site incharge instruction and as per drawing ( Size 4'

x 2'-6" x 2'-6", all framing other then legs are teak wood of size 2" x 1")

ITEM ITEM QTY. RATE PER AMOUNT IN

134 Providing & Fixing simple 12mm thick commercial plywood (Brand 0.00 7690.00 NO.

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) Rack of size 6' x4'

and depth 1'-6" 5 Nos. horizontal partition, supported 2" x 1" framing with

necessary french polish hardware labour etc. as per site incharge instruction and

as per drawing.

135 Providing & Fixing fitting commercial 8mm thick plywood (Brand 0.00 6745.00 NO.

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) magazine stand of

Size 6' x 4' with 3" x 11/2" vertical supporting and adjustable lag support and

horizontal simple 2" x 1" teakwood patti for magazine support with necessary

french polish hardware labour etc.as per site in charges instruction and as per

136 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, 10.00 450.00 Kg

channels, plates etc., including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-incharge, (for payment purpose

only weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners etc.).

137 Hoarding Printing and Mounting 0.00 16.50 Sft.

138 Flex Banner (Any size 240 gsm) 0.00 8.50 Sft.

139 Flex Banner with MS (Mild Steel) framing (Any size 240 gsm (Pipe size 25 x 25 0.00 53.10 Sft.

140 Cloth Banner (Upto 8 x 4 feet 140 gsm) 0.00 23.60 Sft.

141 Cloth Banner with MS (Mild Steel) framing (Up to 8 x 4 feet 140 gsm) (Pipe size 0.00 65.00 Sft.

142 Cloth Banner with Wooden stick at both end for rally display (Any size 0.00 32.85 Sft.

143 Cloth banner standee (Any size 140 gsm Pipe size 25 x 25 x 1.5 mm) 0.00 69.50 Sft.

144 Wall Vinyl Sticker 0.00 28.00 Sft.

145 Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 0.00 38.00 Sft.

146 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 0.00 22.00 Sft.

147 5mm PVC sheet Eco Vinyl (Any size) 0.00 55.46 Sft.

148 Decorative theme base designing & painting with all waterproof materials 0.00 63.00 Sft.

149 Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I.

or PVC pipes including the cost of cutting holes & making good the wall etc.

Complete - 100 mm dia as per architect instructions.

(C) 110 mm dia to upto 150 mm dia 10.00 90.00 No.

(C) 150 mm to 200 mm dia 10.00 98.00 No.

150 Carring out plinth treatment to post construction / existing structure by 50.00 87.03 S.M.

spraying chemical solution for termite control treatment including labour and

material consistment with ISI specification. Using Chlordene and Chiorpurfiles

20 EC. As per 6131_paret-II Consentration Weight one percent is

mended i.e. one litre 20 EC chemical emulsion with 19 liter give 1%

concrentration inclusive of one litre chemical emulsion appication at the rate of

litre chemical / Sqm of surface is recommended as per IS.

151 Providing and constructing sandwitch type Polish Kota Stone cooking 0.00 3010.00 Rmt.

platform 0.6 mt. wide & 0.75 mt. height, including one end side Polish Kota

stone (Double Polish) of 1.25 mt. height & front Polish Kota stone patti of 10 cm

wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in

1:3 with finishing smooth with cement slurry as required and Stainless Steel sink

of 0.45 mt x 0.45 mt size of approved quality and make with required all fitings

& fixitures etc. comp as per instruction given by site in charge at all

152 Providing and constructing sandwitch type Granite stone cooking platform 0.6 0.00 3128.00 Rmt.

mt. wide & 0.75 mt. height, including one end side granite stone (Double Polish)

of 1.25 mt. height & front granite stone patti of 10 cm wide, vertical

partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

finishing smooth with cement slurry as required and Stainless Steel sink of

0.45 mt x 0.45 mt size of approved quality and make with required all fitings &

fixitures etc. comp as per instruction given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

153 Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP / 0.00 102.00 S.M.

PVC)at junction of brick work and RCC work or two dissimilar surfaces, at all

heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before applying

the plaster, including curing, scaffolding all complete as directed.

ITEM ITEM QTY. RATE PER AMOUNT IN

154 Providing and filling Epoxy grout of approved or suggested brand by 0.00 40.00 Rmt.

consultant / Engineer in charge in 4mm to 6mm thick tiles joint including

spacer with cleaning of joint by vacuum or blower etc

155 Providing and fixing rebar of following diameter using chemical grout of

Swanchore/Hilti/Fischer or equivalent make including cost of all equipments,

tools, material, labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of work. The rate

shall also include cost of drilling of hole of required diameter and depth

as mentioned in manufacturer's specification, cleaning the hole with required air

blower and other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item includes necessary scaffolding, staging,

labour, tools and equipments, etc. complete as directed by the engineer-in-

156 Providing and fixing rolling shutters of approved make made of 80 mm wide 10.00 3554.40 Smt.

M.S. laths inter locked together through their entire lenght and jointed together at

the ends by end locks mounted on specially designed pipe shaft with

bracket plates, guide channels and arrangements for inside and outside

locking with push-pull operation including the cost of hood cover and spring

etc. complete (A) Shutters having width below 3.5 M.

157 Providing and laying broken china mosaic flooring for terrace using 12mm to 20.00 779.70 Smt.

20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending them upto 15 cm

along the wall clearing with water and oxalic acid etc. as directed.

158 Providing and Fixing Hollow steel Sections Framed Work including 15.00 126.00 Kg

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord etc. as per

Engineer- in-charge.TATA / JINDAL / ASIAN Make

159 Providing cement vata (10 cm x 10 cm size) quarter round in cement mortar 1:1 10.00 24.28 Rmt.

including neat cement finishing, watering etc. complete.

160 White Washing with lime on wall surface to give an even shade & surface incl.

throughly brooming the surface to remove dirt, dust mortar drops & losse

scales of lime wash & other foreign matter Two coats.

(A) walls 10.00 13.03 S.M.

(B) Ceiling 10.00 14.21 S.M.

---do Extra Subsequant coat over above Item

(A) walls 0.00 6.01 S.M.

(B) Ceiling 0.00 6.51 S.M.

161 Colour washing with lime on wall over & incl. a primary coat of white washing

to give an even shade & surface incl. throughly brooming the surface to remove

all dirt, dust mortar

drops & loose scales of lime wash & other foreign matter.Two coats.

(A) walls 0.00 13.03 S.M.

(B) Ceiling 0.00 15.37 S.M.

---do Extra Subsequant coat over above Item

(A) walls 0.00 8.35 S.M.

(B) Ceiling 0.00 10.53 S.M.

162 Distempering two coats with oil bound washable distemper of approved

brand & manufacture & of required shade on wall surface to give an even

shade over and & including a priming coat of alkali resistance primer of

approved brand after throughly brushing the surface to give an even shade after

throughly brushing the surface free from mortar droppings and other foreign

matter and also including preparing the surface even and smooth.

(A) walls 10.00 75.84 S.M.

(B) Ceiling 10.00 84.37 S.M.

---do Extra Subsequant coat over above Item

(A) walls 0.00 31.91 S.M.

(B) Ceiling 0.00 35.25 S.M.

ITEM ITEM QTY. RATE PER AMOUNT IN

163 Apply two coats of putty and two coats of primer of approved brand and 10.00 40.59 S.M.

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other matter and

sand papered smooth.

164 Wall painting (two coats) with plastic emulsion paint of approved 20.00 83.36 S.M.

brand and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

For every subsequent coat Extra over item no.above 0.00 35.41 S.M.

165 Distempering two coats on previously distempering wall (without 10.00 60.63 S.M.

primer) with oil bound washable distemper of approved brand & required shade

on wall surface to give an even shade after throughly brushing the surfaces clean

of all grease, dirt loose places of sceles & also including preparing the surface

even and smooth.

166 Applying Priming coat over new steel and other metal surface after over and 20.00 36.74 S.M.

including preparing the surface by throughly cleaning oil, grease dirt and other

foreign matter and scoured with brushed fine steel wool, scrapers and sand paper

with ready mixed priming

paint brushing red lead.

167 Painting two coat (excluding priming coat) on new steel and other 20.00 68.57 S.M.

metal surface with synthetic enemal paint, burshing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matters.

168 Painting one coat (excluding priming coat) on Previously Painted steel and 20.00 39.93 S.M.

other metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign matters.

For every subsequent coat Extra over item no.above 0.00 40.09 S.M.

169 Applying Priming coat over new wood & wood surface after & incl. 20.00 43.10 S.M.

preparing the surface by throughly cleaning oil grease dirt & other foreign

matter sand papering & knetting Really mixed paint brushing priming for

170 Painting two coats (excluding priming coat) on New wood & wood based 20.00 92.87 S.M.

surface with enamel paint to give an even shade & surface incl. cleaning of all

dirt, dust & other foreign matter.

171 Painting two coats (excluding priming coat) on previously painted 20.00 47.44 S.M.

wood & wood based surface with enamel paint to give an even shade &

surface incl. cleaning of all dirt, dust & other foreign matter.

172 Polishing with french polished on New wood & wood based surface to give 20.00 142.49 S.M.

an even surface incl. cleaning the surface of all dirt, dust & sand papered smooth

incl. a cost of wood filler.

173 Polishing with french polished on previously polishing wood & wood based 20.00 73.34 S.M.

surface to give an even surface incl. cleaning the surface of all dirt, dust & sand

papered smooth incl. a cost of wood filler.

174 Painting two coats of enamel paint over priming coat (including 20.00 90.00 S.M.

priming coat) on wall after removing entire surface dirt, dust foreign

matter & also incl. preparing the surface even & sand papered smooth etc.

175 Painting two coats of enamel paint (Excluding priming coat) over previously 20.00 60.00 S.M.

painted wall after removing entire surface with even shade & surface after

removing dirt, dust foreign matter etc. comp.(M.R.)

176 Providing & applying two coats of weather shield max paint (3 coats may be 200.00 82.00 S.M.

required in case of darker colours.)of ICI Dulux or Apex Ultima of Asian

Paint including applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding, preparing the surface,

watering, curing etc. complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk, grease,

fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff

coir brush, followed by water jetting if required. Fill up all minor cracks

and defects with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly using wire

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5 hours.

Application of putty is not recommended.

ITEM ITEM QTY. RATE PER AMOUNT IN

177 Providing and fixing window having extruded aluminum Colour anodized 10.00 142.49 S.M.

section frame main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m,

horizontal Four track member size 122.20mm x 31.75mm x 1.10mm@ wt

kg/m, vertical member of size 122.20mm x 31.75mm x 1.50mm @1.398 kg/mt

with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm@

0.456kg/mt ,vertical member of size 40mm x 18mm x 1.29mm @ 0.456 kg/mt

with 5 mm thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

(A) Same as above but Colour anodized 10.00 73.34 S.M.

178 Providing and fixing window having extruded aluminium Powder Coated 10.00 1591.87 S.M.

section frame main outer size 95 mm x 24 mm x 1.17 mm (of jindal section

no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track member size 92 mm x

31.75 mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical

member of size 92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mm x 18 mm

x 1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical member of

size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949 @ wt. of

kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminium fittings & fixtures and transparent silicon sealant glass fixing

(A) Same as above but Colour anodized 5.00 1591.87 S.M.

179 Providing and fixing window having extruded aluminium Powder Coated 5.00 1705.67 S.M.

section frame main outer size 63.50 x 38.10 x1.95 mm (of Jindal section

no.4605, @ Wt. 1.094Kg/mt) horizontal Two track member size 61.85 mm x

31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.)

vertical member of size 61.85 mm x 31.75 mm x 130 mm (of jindal

section no:8758 @ wt. of 0.659 kg/mt) with sliding shutters of horizontal

member size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949, @

Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x 1.29 mm (of

jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc. complete for window.

(A) Same as above but Colour anodized 5.00 1705.67 S.M.

180 Providing and fixing standared extruded of alluminium section of size 63mm 5.00 1175.56 S.M.

x 38.10mm x1.2mm, @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for

(A) Same as above but Colour anodized 5.00 1175.56 S.M.

181 Providing and fixing standared extruded of aluminium section of size 61 x 37.0 5.00 1833.29 S.M.

x0.90 mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt) with

Powder Coated alluminium frame with 5 mm thick transparent bronze

colour tinted float glass as details etc. complete for fix window.

(A) Same as above but Colour anodized 5.00 1833.29 S.M.

182 Providing & fixing partly panel & partly glass Powder Coated Aluminium 5.00 3237.00 S.M.

doors with aluminium section of Hindalco, Jindal , Narmada,Banco or

Equivalent approved make having Poder Coated outer frame Leg Partition

section of 63.50 mm x 38.10 mm having weight 1.158 kg. / R.M. shutter

section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and

middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881

kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No.

Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick

prelaminated sheet of Greenlam, Panama or archid make as approved by

Engineer-in charge including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 5.00 3237.00 S.M.

183 Providing & fixing Powder Coated Aluminium partly glazed and partly 5.00 2400.00 S.M.

panelled partition using medium duty sections of Hindalco,Zindal,

Narmada, Banco or Equivalent approved make having section 63.50 mm x

38.10mm ( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt), Galzing

Clip with 5 mm thick clear float glass of approved make including all other

necessary fittings and fixtures. Entire work will have to be made water proof

using necessary rubber sectioned wherever required. Gaps all round the frame to

be filled with approved water proof sealent. Bottom portion of doors both side

to be covered with 12mm thick prelaminated particle board of approved

make and quality and as per design.

(A) Same as above but Colour anodized 5.00 2400.00 S.M.

184 Demolition including stacking of serviceable materials with all 10.00 1110.75 C.M.

lead and lift. (i)) RCC Work

ITEM ITEM QTY. RATE PER AMOUNT IN

185 Demolition of brick work and stone masonry including stacking of serviceable 10.00 577.92 C.M.

materials and disposal of unserviceable materials with all lead and lift. (i) On

186 Removing and scraping of old deteriorated plaster of any thickness from wall / 10.00 20.55 S.M.

RCC member including stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift.

187 Dismentling steel work including distempering and stacking 10.00 3.85 Kg.

the maerials with all lead and lift.

188 Dismentling door, windows, ventilators etc. (wood or steel) shutters including 5.00 197.09 EACH

chowkhats architraces, holdfasts and other attacement etc. complete and stacking

them within all lead and lift. (i) Not exceeding 3 Sq.M. in area.

189 Dismentling door, windows, ventilators etc. (wood or steel) shutters including 5.00 263.90 EACH

chowkhats architraces, holdfasts and other attacement etc. complete and stacking

them within all lead and lift. (i) Exceeding 3 Sq.M. in area.

190 Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters etc. 4.97 50.11 S.M.

stacking of serviceable materials and disposal of unserviceable materials with all

lead and lift. (i) G.I. sheet roofing.

191 Removing of Collapsible Gate 5.00 1500.00 No.

192 Removing of Rolling Shutter 5.00 1000.00 EACH

193 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable

materilas and disposal of unserviceable materials with all lead and lift.

A Kota stone flooring and steps 5.00 50.11 S.M.

B Marble 5.00 50.11 S.M.

C Tiles flooring / Dedo 5.00 50.11 S.M.

D Granite flooring and steps 5.00 50.11 S.M.

194 Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with fittings and

clamps including stacking the materials with all lead and lift. (for any dia, of

GI pipe (15mm) 0.00 78.51 Rmt.

GI pipe (25 mm) 0.00 78.51 Rmt.

GI pipe (32 mm) 0.00 78.51 Rmt.

GI pipe (40 mm) 0.00 78.51 Rmt.

GI pipe (50 mm) 0.00 78.51 Rmt.

UPVC pipe 0.00 78.51 Rmt.

195 Dismentling wood work, wrought framed and fixed in frames trusses including 0.00 1847.34 C.M.

stacking the materials with all lead and lift.

196 Dismentling barbed wire in fencing including making rolls and also including 10.00 70.15 Rmt.

dismentling fencing posts including all earth work concrete in base and making

good the disturbed fround stacking useful materials as directed and disposing as

directed and disposing of the unserviceable materials with all lead and lift.

197 Dismantling sanitary fittings like wass basin, W.C. pan Indian and European 10.00 425.93 EACH

type, flushing tank etc. including stacking the materials with all lead and lift.

198 Sanitory fitting like bib tap, flush cock, pillar tap, angle cock etc. 10.00 50.50 EACH

199 Demolition of terrace including stacking serviceable materials and disposal of 10.00 66.81 S.M.

unserviceable materials with all lead and lift.

(i) Brick tile covering.

200 Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. 10.00 56.79 S.M.

stacking of serviceable materials and disposal of unserviceable materials with all

lead and lift. (ii) A.C. sheet roofing.

201 Dismentaling of Kerb. 10.00 90.00 Rmt.

202 Box Cutting the road surface to proper slope and camber for making base 10.00 109.41 C.M.

includinng removing the excavated stuff and depositing on the road side slope as

directed up to 50 mt. lead.

203 Preparation of subgrade with Compacting, Levelling and consolidation of 10.00 9.00 S.M.

subgrade with miniroller /plate vibrator machine including watering and filling in

depressions which occur during the process as directed by engineer in charge.

204 Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering, 10.00 225.00 C.M.

ramming & consolidation etc. complete.

205 Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm compacted 100.00 1016.00 C.M.

thickness over the base including necessary compaction, watering etc. complete.

Item includes leveling by using vibratory plates compacted machine and as

directed by engineer in charge.

ITEM ITEM QTY. RATE PER AMOUNT IN

206 Providing 100mm thick readymade C.C. kerb of strength M-20 (size 300mm x 50.00 228.00 R.M.

380mm) purchased from SMC's approved paverblock manufacturer & setting in

line, level and in truly vertical position, including filling joints in C.M. 1:1 (1 part

of cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of cement :

1 part of coarse sand) including watering etc. complete and as directed by

engineer in charge.

For rounding at the edge of footpath (For fanning portion) 50.00 274.00 R.M.

207 Providing interlocking type Rubber moulded cement concrete paver block of 30.00 524.00 S.M.

approved shape, design & colour having 60mm thickness (M-35) purchased from

SMC's approved paverblock manufacturer only & fixing of fine sand bedding.

Item includes levelling by using vibratory plates compacted machine. Item also

includes all materials, labour, equipments, tools, plants, watering, cleaning etc.

Without colour 30.00 524.00 S.M.

208 Providing & laying Granular sub base (GSB)confirming to Grading-V of 100.00 1469.00 C.M.

Table 400.0 of compacted thick of 150mm with specified graded stone metal and

sand mixed in place and laid with mechanical means spreading with motor

grader and compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD including all

material, labour, machinery with all leads and lift etc. complete.

209 Providing & laying cement concrete Pavement using 1:1.5:3 (1 cement:1.5 3.00 5981.00 C.M.

sand:3 graded stone agg. 20 mm nominal size) & Vaccuum Dewatering

technique including floating surface with a skim powder floater, curing etc.

210 Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2 sand:4 5.00 5245.25 C.M.

graded stone agg. 20 mm nominal size) & Vaccuum Dewatering technique

including floating surface with a skim powder floater, curing etc. complete.

211 Providing and laying 200 micron plastic sheet on prepared sub base For V.D.S 3.00 26.00 S.M.

212 Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of total thickness with 4.00 50.00 R.M.

filling of epoxy sealent as directed by engineer in charge

213 Providing and Replace door, Window S.S. Fixtures fix in wooden / Alluminium

(A) 4" S.S. Hinge 20.00 75.00 No.

(B) 5" S.S. Hinge 20.00 85.00 No.

(C) 8" S.S. Aldraf 20.00 175.00 No.

(D) 10" S.S. Aldraf 20.00 200.00 No.

(E) 12" S.S. Aldraf 20.00 250.00 No.

(F) 4" S.S. Handle 4mm. Th. 20.00 100.00 No.

(G) 6" S.S. Handle 4mm. Th. 20.00 125.00 No.

(H) 4" S.S. Stopper 4mm. Th. 20.00 75.00 No.

(I) 8" S.S. Stopper 4mm. Th. 20.00 125.00 No.

(J) 6" S.S. Pavan Ankdi Heavy duty 20.00 35.00 No.

(H) Alluminium door lock 20.00 200.00 No.

(I) Door Closer 20.00 200.00 No.

214 MARBLE PASTE WATER PROOFING TREATMENT (Layer-1 (Liquid Form) 100.00 27.00 SQ

White Cement, SBR(Dr.Fixit),Bulbond (Synthetic Resin Adhesive), Crack Sill

Layer-2: (Paste Form) Marble Powder, Marble Paste Liquid,Bulbond,Water.

Layer-3(Liquid Form) Asian Paint,Smart Care Damp Proof,Water Etc.)

NOTE :- (1) The whole work is to be executed through specialized agency with a

guarantee of 05 (Five) years given on a prescribed proforma duly stamped (2)

The rate shall include for work at all floors & conducting water proof test as

directed. (M.R.)

215 Dismentaling Old Partition & Ceilling with all lead and lift, labour etc. incl all 0.00 350.00 S.M.

216 Cutting & Refixing Old Partition incl all hardware, material & labour etc. incl all 0.00 350.00 S.M.

217 Providing & Fixing Wooden Floor incl. all material & labour etc. incl all 0.00 3673.00 S.M.

218 Providing & Fixing Woolen Carpet at Floor with all material & labour etc. incl 0.00 1044.00 S.M.

219 Providing & Fixing 12mm Bison Panel, 50mm Thick Rock Wool & 4mm Thick 0.00 6374.00 S.M.

ACP Panel at Glass Wall Side with all material & labour etc. incl all

220 Supply & Fixing of 16mm.th.Armstrong classic Lite square edge mineral fiber 0.00 980.00 S.M.

celling with 24mm grid (local) G.I. Frame grid consist of 600mm x 600mm.

tecno grid pre coated main runner 38 x 24 x3600 mm, cross T 30 x 24 x

mm,cross runner 24 x 24 x 600mm, wall Angle 24x24 mm. required length

suspension wire of 2.50mm G.I.& necessary hardware etc. comp. approved by

221 Removing of All Scrap Material in tractor with hydraulic trailer and 8 Nos. Of 0.00 2600.00 DAY

labours from Campus Boundry

ITEM ITEM QTY. RATE PER AMOUNT IN

222 Providing & applying textured matt paint at all floor levels of approved quality in 0.00 58.00 S.M.

two coats after thoroughly brooming the wall or similar surfaces to remove all

dust dirt & loose mortar droppings , Filling Surface imperfections such as holes

and cracks using a mixture of white cement and fine sand only (in the ratio of

1:3) & watering the surface incl. curing etc. complete to give even shade as per

the instruction of engineer in charge etc. complete. (M.R.)

223 Steel work of square pipe hollow section, as per reqiure size, welded in built up 0.00 81.00 Kg.

sections, framed work including cutting, hoisting, fixing in position and applying

a priming coat of red lead paint. (A) In beams and joints channels angles, tees,

flats with connection plates or angles cleats as in main and cross beam, hip and

trussed purlins connected to common rafters and the like.(Rate analysis)

224 Providing and fixing 1.20 meter high fencing with 2.0 meter long M.S. angle post 0.00 409.00 R.M.

40mm X 40mm X 6mm and oil painting 3 coats fixed at 2.5 mt.C/C. with five

horizantal lines and two diagonals of galvanised steel barbed wire of 'TATA

make' weighing 9.38 Kg.per 100 meter, strained and fixed to posts with G.I.

staples, including fixing posts in ground with 0.5 m X 0.5 m X 0.5 mt. block in

C.C. 1:5:10 etc. comp.

225 Providing and fixing 20 mm x 20mm x 10 gauge thick (using TATA make 0.00 590.00 R.M.

G.I.wire) galvanise ironwire mess (G.I. Crimped net) including cutting fixing

226 Cutting out cracks of wall or terrace to V section ,cleaningout, grouting with 10.00 41.41 R.M.

cement and sand slurry 1:3 (1 cement : 3 sand ). at any height

227 Applying polymer modify mortar in proportion at 1:2(one part cement: 2 part

white sand(sweet water) with chemical(SBR) dosage of minimum 5 litre pe bag

of cement. Also apply bonding agent prior to polymer modify mortar in

proportion of (1:1)(1 part SBR : 1 part cement) using Roof, MC and FOSROC

Beam / Columns 0.00 1830.00 S.M.

Ceiling 0.00 1830.00 S.M.

228 Crack Repairs:-Crack filling using fiber reinforced polymer modified mortar 10.00 120.00 R.M.

after openning crack in "V" grove, Making Surface dust free, with a bond coat of

polymer as per the data sheet for crack repairing cracks less than 8mm

229 Providing & Fixing PVC West Cuplin at various places at all floor approved 0.00 60.50 No.

quality as directed By Eng.in charge.

230 Providing & Fixing S.S. West Cuplin at various places at all floor approved 0.00 93.50 No.

quality as directed By Eng.in charge.

231 Providing and fixing Supply Pipe for Washbasin or sink 0.00 80.00 No.

232 Providing and fixing Jet Sprey Cock at all floor level etc. complete. 0.00 500.00 No.

233 Providing and fixing garden hose pipe with 15 mtr length of approved quality : 0.00 1250.00 No.

Size: - 16-20 mm dia

234 Providing & Fixing Brass Tee at all floor levels, of approved quality including

fixing etc. Complete

235 Providing & Fixing U.P.V.C Tee at all floor levels, of approved quality including

fixing etc. Complete

236 Providing & Fixing U.P.V.C Alba at all floor levels, of approved quality

including fixing etc. Complete

237 Providing and fixing chromium plate bottle trap with necessary coupling of 0.00 331.28 No.

approved quality for wash- basin

238 Providing & Fixing Water proof M-Seal at various places approved quality as 0.00 176.00 No.

directed By Eng.in charge.

239 Providing and fixing

(A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 10.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 5.00 200.00 No.

240 Supplying and fixing C.I. cover 300 mm X 300mm. without frame for gully trap 30.00 660.00 No.

(standard pattern) the weight of cover to be not less than 4.53 Kg.

EXECUTIVE ENGINEER

SOUTH WEST (ATHWA) ZONE

SIGN OF CONTRACTOR SURAT MUNICIPAL CORPORATION