Electrification work of Police stations 1. Sholayur police station 2. Dist. police chief, Palakkad 3. Agali police station

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FR PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing using copper wire with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B/ RoHS compliant modular accessories). Group C

Single control light point with 6A, 3 plate ceiling rose

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.

Call bell point with modular type 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Independent plug

Supply, fabrication, conveyance and fixing the 25mm dia B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).

Supply, conveyance installation testing and commissioning the light fittings 1200mm 16-20 W LED lamp with box type fixture complete with all accessories and lamps etc. directly on wall or ceiling and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

Supply and fixing angle batten holder and giving connection etc as required and 9W LED bulb

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of 25W LED Street light fitting complete with all accessories and lamps etc. in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.

Supply and installation of suitable fan hook in the RCC slab as per IS 732 as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200 mm sweep - 5 star rated

Charges for cutting holes/cutting window grill suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, making good damages etc. as required.

Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 300/ 305 mm, single phase light duty exhaust fan in platic /metal frame

Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required. Ding Dong bell

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

20 mm dia light gauge

25 mm dia light gauge

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 3 run

2.50 sq mm 3 run

4 sq mm 2 run + 2x2.5 sq mm earth

6.00 sqmm 4 run + 2x4 sqmm earth

Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages etc as required.

2 module metal box in recess

3 module metal box in recess

4 module metal box in recess

6 module metal box in recess

8 module metal box in recess

12 module metal box in recess

18 module metal box in recess

Supply & Fixing the following types/ sizes of front plates on the existing modular boxes.

1 module white/ off-white

2 module white/ off-white

3 module white/ off-white

4 module metal box in recess

6 module metal box in recess

8 module metal box in recess

12 module metal box in recess

18 module metal box in recess

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B/ RoHS compliant )

6 A SP 1 way switch

16 A SP 1 way switch

20 A DP switch with indicator

6 A socket

16 A socket

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

12 way , Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) asrequired.

4 way, Double door

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

40 A four pole isolator

40 A, 4 pole, 30 mA RCCB

40 A two pole change over

25 A two pole isolator

25 A, 2 pole, 30 mA RCCB

6-32A( C curve)

Dummy plates/ Dummyswitch

Supply and providing plate earthing as per IS 3043 with 38 mm dia GI earth pipe, including all civil work.

Supply and fitting 20 x 3 mm tinned copper earth bus

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.

3.15 mm copper conductor (10 SWG)

Supply and fixing 100X50mm PVC cable management system with base and lid along with the following accessories conforming to IEC 61084/BS 476& 4678 on surface or recess including cutting the wall and making good the damages in case of recessed installation as required.

100 X 50 mm CMS with base & lid

External angle 90°

Internal angle 90°

End cap

Cable divider 50mm deep

Charges for Cleaning the existing single/ double tube t fitting, checking all connections attending repairs etc... as required

Cleaning the existing Ceiling fan/Wall fan/Exhaust , checking all connections attending petty repairs etc as required

Dismantling the 3M/ 5M /6M/8M/10M modular boxes with front, plastering and making good damages etc as required.

Charges for dismantling tube light/ceiling fan/wall fan.

Dismantling unnecessary PVC conduits with telephone wire/ Electric wire / net cable without defects to the surface of wall.

Charges for existing lagged power cable/telephone cable/network cable reclamping with suitable size of saddle clips/putting inside the cable management system as required.

Supply & installation of dust and vermin proof, wall mounting, three phase meter board with provision for cut-out, nuetral link, MCB etc, hinged door construction. 63/40 A, 415 V, 4 pole MCB - 1No. 63 A, 415 V Kitkat fuse fitting - 3 Nos

Supply and providing suitable size PVC pipe for binding the wire of service main

Shifting of UPS and batteries to new position including reconnection.

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of installation, testing and commissioning cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD/Irrigation Dept. specification and direction of Engineer at site.

Description of Work / Item(s)

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FR PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing using copper wire with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B/ RoHS compliant modular accessories). Group C

Single control light point with 6A, 3 plate ceiling rose

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Independent plug

Supply, fabrication, conveyance and fixing the 25mm dia B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).

Supply, conveyance installation testing and commissioning the single tube light fittings 1200mm 16-20 W LED lamp with box type fixture complete with all accessories and lamps etc. directly on wall or ceiling and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

Supply, conveyance installation testing and commissioning the double tube fittings 1200mm 16-20 W LED lamps with box type hanging fixture complete with all accessories and lamps etc. on ceiling and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

Supply and fixing angle batten holder and giving connection etc as required and 9W LED bulb

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of 25W LED Street light fitting complete with all accessories and lamps etc. in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.

Supply and installation of suitable fan hook in the RCC slab as per IS 732 as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200 mm sweep - 5 star rated

Charges for cutting holes/cutting window grill suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, making good damages etc. as required.

Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 300/ 305 mm, single phase light duty exhaust fan in platic /metal frame

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

20 mm dia light gauge

25 mm dia light gauge

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 3 run

2.50 sq mm 3 run

4.00 sq mm 3 run

4 sq mm 2 run + 2x2.5 sq mm earth

Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages etc as required.

2 module metal box in recess

3 module metal box in recess

4 module metal box in recess

6 module metal box in recess

8 module metal box in recess

12 module metal box in recess

18 module metal box in recess

Supply & Fixing the following types/ sizes of front plates on the existing modular boxes.

1 module white/ off-white

2 module white/ off-white

3 module white/ off-white

4 module metal box in recess

6 module metal box in recess

8 module metal box in recess

12 module metal box in recess

18 module metal box in recess

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B/ RoHS compliant )

6 A SP 1 way switch

16 A SP 1 way switch

20 A DP switch with indicator

6 A socket

16 A socket

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way , Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer MCCB ) as required.

8 way, Double door

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

100A, 4p MCCB

25 A two pole isolator

25 A, 2 pole, 30 mA RCCB

25-32A 3P MCB

6-32A( C curve)

Dummy plate/Switch

Supply and fitting 20 x 3 mm tinned copper earth bus

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.

3.15 mm copper conductor (10 SWG)

Supply and fixing 100X50mm PVC cable management system with base and lid along with the following accessories conforming to IEC 61084/BS 476& 4678 on surface or recess including cutting the wall and making good the damages in case of recessed installation as required.

100 X 50 mm CMS with base & lid

External angle 90°

Internal angle 90°

End cap

Cable divider 50mm deep

Charges for Cleaning the existing single/ double tube t fitting, checking all connections attending repairs etc... as required

Cleaning the existing Ceiling fan/Wall fan/Exhaust , checking all connections attending petty repairs etc as required

Dismantling the 3M/ 5M /6M/8M/10M modular boxes with front, plastering and making good damages etc as required.

Charges for dismantling tube light/ceiling fan/wall fan.

Dismantling unnecessary PVC conduits with telephone wire/ Electric wire / net cable without defects to the surface of wall.

Charges for existing lagged power cable/telephone cable/network cable reclamping with suitable size of saddle clips/putting inside the cable management system as required.

Supply and installation of 8W LED recess type fitting in existing opening including making good the damages.

Charge for dismantling existing MCCB DB, reconnection all outgoning circuit and incoming cable to the new DB including making good the damages etc. as required.

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of installation, testing and commissioning cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD/Irrigation Dept. specification and direction of Engineer at site.

Description of Work / Item(s)

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FR PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing using copper wire with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (Group B/ RoHS compliant modular accessories). Group C

Single control light point with 6A, 3 plate ceiling rose

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.

Call bell point with modular type 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points.

Independent plug

Supply, fabrication, conveyance and fixing the 25mm dia B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).

Supply, conveyance installation testing and commissioning the light fittings 1200mm 16-20 W LED lamp with box type fixture complete with all accessories and lamps etc. directly on wall or ceiling and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.

Supply and fixing angle batten holder and giving connection etc as required and 9W LED bulb

Supply, conveyance, installation, testing and commissioning of pre-wired light fitting of 25W LED Street light fitting complete with all accessories and lamps etc. in the existing GI pipe and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.

Supply and installation of suitable fan hook in the RCC slab as per IS 732 as required.

Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200 mm sweep - 5 star rated

Charges for cutting holes/cutting window grill suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, making good damages etc. as required.

Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 300/ 305 mm, single phase light duty exhaust fan in platic /metal frame

Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required. Ding Dong bell

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

20 mm dia light gauge

25 mm dia light gauge

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 3 run

2.50 sq mm 3 run

4 sq mm 2 run + 2x2.5 sq mm earth

4 sq mm 4 run +2x 2.5 sq mm earth

6.00 sqmm 4 run + 2x4 sqmm earth

Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages etc as required.

2 module metal box in recess

3 module metal box in recess

4 module metal box in recess

6 module metal box in recess

8 module metal box in recess

12 module metal box in recess

18 module metal box in recess

Supply & Fixing the following types/ sizes of front plates on the existing modular boxes.

1 module white/ off-white

2 module white/ off-white

3 module white/ off-white

4 module metal box in recess

6 module metal box in recess

8 module metal box in recess

12 module metal box in recess

18 module metal box in recess

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B/ RoHS compliant )

6 A SP 1 way switch

16 A SP 1 way switch

20 A DP switch with indicator

6 A socket

16 A socket

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way , Double door

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) asrequired.

6 way, Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (8+18) - three phase double cover (IP 42/43)

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

63 A four pole isolator

63 A, 4 pole, 30 mA RCCB

25 A four pole isolator

25 A, 4 pole, 30 mA RCCB

40 A two pole change over

25 A, 2 pole, 30 mA RCCB

16-32A 3P MCB

6-32A( C curve)

Dummy Plate/Switch

Supply and providing plate earthing as per IS 3043 with 38 mm dia GI earth pipe, including all civil work.

Supply and fitting 20 x 3 mm tinned copper earth bus

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.

3.15 mm copper conductor (10 SWG)

Supply and fixing 100X50mm PVC cable management system with base and lid along with the following accessories conforming to IEC 61084/BS 476& 4678 on surface or recess including cutting the wall and making good the damages in case of recessed installation as required.

100 X 50 mm CMS with base & lid

External angle 90°

Internal angle 90°

End cap

Cable divider 50mm deep

Charges for Cleaning the existing single/ double tube t fitting, checking all connections attending repairs etc... as required

Cleaning the existing Ceiling fan/Wall fan/Exhaust , checking all connections attending petty repairs etc as required

Dismantling the 3M/ 5M /6M/8M/10M modular boxes with front, plastering and making good damages etc as required.

Charges for dismantling tube light/ceiling fan/wall fan.

Dismantling unnecessary PVC conduits with telephone wire/ Electric wire / net cable without defects to the surface of wall.

Charges for existing lagged power cable/telephone cable/network cable reclamping with suitable size of saddle clips/putting inside the cable management system as required.

Supply & installation of dust and vermin proof, wall mounting, three phase meter board with provision for cut-out, nuetral link, MCB etc, hinged door construction. 63 A, 415 V, 4 pole MCB - 1No. 63 A, 415 V Kitkat fuse fitting - 3 Nos

Supply and providing suitable size PVC pipe for binding the wire of service main

Shifting of UPS and batteries to new position including reconnection.

Supply, conveyance, installation, testing and commissioning of LED flood light of 100W, make Crompton/Philips/equivalent complete with all accessories and lamp etc.

2:Rate should be inclusive of installation, testing and commissioning cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD/Irrigation Dept. specification and direction of Engineer at site.

YOOSAF K A

YOOSAF K A

YOOSAF K A