DM office Belonia work

Supply of the following :-

HDPE Pipe 110 mm outer dia. of 6M Length

Channel 75x40x6mm (Galvanised)

PVC CABLES (SINGLE CORE) 240 mm2

XLPE CABLE (HT) 3Cx120 sq. mm

Rewireable Porcelain Cut out 500 Amp

11KV Polymer composite 45 KN Disc Insulator

11 KV Stay insulator

11KV Disc fittings Up to 7/3.8mm, 2-U Bolt type

11KV Gang Operated Switch (Polymeric type)

LIGHTINING ARRESTOR 9 KV, 5KA Polymeric L/A

Stay set complete

GI Stay wire stranded stay wire 7-4mm

8SWG GI Wire

NUTS AND BOLTS 16 x 50 mm. (2

11 KV Drop out Switch DOF Polymeric 3ph

11 KV Covered Conductor (70 SQMM)

Steel Tubular Pole 11m long SP 54

Channel 100x50x6mm (Galvanised)

Angle 65X65X6mm (Galvanised)

Aluminium Lugs 95mm sq

Aluminium Lugs 300mm sq

Supply of febricated clamps of assorted size of MS flat (50 x 6 mm) with double coat of red oxide primer coating

Grouting for Steel Pole @0.273 Cum/Pole

Cable (XLPE 11KV) 1Cx120 sq mm

LT cable kit for XLPE 3Cx 300 Sq mm outdoor

11KV VCB 1250 A with GI Mounting Structure & Marshalling Box

LT Grade Armoured Cable, 4Cx 300sqmm

11 KV pin insulator Polymer with GI Pin and Hardware fittings. as per scope of work. as per Technical Specification, approved Drawing Scope of works

Insulated Tension Mid Span Joint Repair Sleeve for Covered Conductor 100 sqmm

Insulating Piercing Connector for 11 kV CC to CC 70 sqmm

Non-metallic helical ties for covered conductor

11 KV Disc insulator Tension Hardware , 45 KN suitable for stringing Covered Conductor inc all accessories

9 mtr long full galvanized pole

Erection of the following

Erection of M.S.Channel Cross-Arm bracket of 2 wire upto 1100Mtr. Long of 75 x 40 x40 x 6 mm

Earthing with G.I pipe 2.5mtr. Long and 40mm dia, including excavation, refilling with alternate layer of salt & Charcoal as per drawing (excluding supply of G.I.Pipe, Salt & Charcoal, Gi wire, nuts &boIts, etc. as required)

Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Trench Size: Width-350mm, Hieght1200mm / Sand(couhioning): Hieght-250mm, Width350mm/Protection: Double layer BricksUpto 120 sq. mm

Febrication of Cross-Arms by MS Channel/MS Angle as per specification

Laying & strining of 1KM (Single Conductor)10/8SWG GI wire including hoisting & binding etc. Complete as required

Erection of 9KV,5KA single pole metal oxide gapless type LA , including necessary connection complete as per technical specification

Erection of 11KV DOF unit set of three nos. including necessary connection complete as per technical specification.(Excluding the cost of back clamp, Nuts & Bolts)

Erection of 11KV 200 Amp. GOS unit set of three nos. including necessary connection complete as per technical specification. (Excluding the cost of back cIamp,Nuts & Bolts)

Installation/Positioning of 11/0.430KV,3-Phase 315KVA to SOOKVA of Distribution Transformer on Pole with necessary connections & fitting fixing of all allied accessories components as required for making complete in all respect for energizing

Providing Three Phase Service Connection with laying PVC cable from nearby Electrical pole to Premises upto 35mtr. in length supported by G.I.Wire,Reel Insulator i/c fitting fixing of Energy Meter as required

Carriage of 11/0.430, 3-Phase 315KVA/500KVA by Mechanical Transport from the Site /Store/Worshop to working site Vis-a-vis including loading, unloading and placing on base, as required,a) Upto the lead range 25KM From MMD Store to Sub Division Store

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Trench Size: Width-350mm, Hieght-750mm / Sand(couhioning): Hieght-250mm, Width-350mm/ Protection: Double layer BricksAbove 185 sq. mm upto 400sqmm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. Trench Size: Width-200mm, Hieght-750mm / Sand(couhioning): Hieght-250mm, Width-200mm/ Protection: Double layer BricksAbove 185 sq. mm upto 400sqmm

Supplying and Making Indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as requiredUp to 150sqmm

Providing of Pre-cast cement concretecableidentification route marker (1 cement: 2 coarse sand4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits as per design, drawing and specification of TSECL. The marker snail be embossed "DANGERS: TSECL, ELECTRIC POWER CABLE” with Black colour letter {both side) The visible part shall be painted with Yellow colour japan paint. (1 cement: 2 coarse sand 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3(1cement : 3 fine sand) etc. complete, excluding the plastering of jambs, sills and soffits.

Supply of 2.5mtr. Long , 40mm dia G.I.Pipe Make: TATA/ JINDAL)

Supply of 60Kg Salt & 55Kg Charcoal ( For 1 Pit).

Supplying and Making Outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as requiredUp to 150sqmm

Erection of SINGLE POLE STUCTURE 11m GI ST pole including excavation of pits in all type of soil, fixing stone pad, concreting, backfilling, fitting and fixing of all accessories (fully dressed) including G.I. fabricated items, pin insulators, clamps & other hardware, danger plate, anti-climbing device, pole numbering by paint as per technical specifications

Erection of DOBLE POLE STUCTURE 11 m GI ST pole including excavation of pits in all type of soil, fixing stone pad, concreting, backfilling, fitting and fixing of all accessories (fully dressed) including G.I. fabricated items, clamps, insulators, clamps & hardware, danger plate, anti-climbing device, pole numbering by paint and installation of earth pipes and pole earthing using GI wire as per technical specifications & approved drawings

Stringing of 11KV Covered Conductor 70 sqmm (all 3 phases) as per specification and approved drawings, stringing of covered conductors at proper tension/ sag, fitting and fixing of all accesories Piercing Connectors , Jointing Sleeves, insulator binding using approved Non-metallic helical ties, jumpering, connections to other lines etc. complete in all respect

Erection of complete HT Stay Set and GI stay wire including excavation of stay pit, concreting, installation of all accesories stay clamp, guy insulator, anchor plate , nut bolts, turn buckles, Stay Rod, & 7/10 SWG GI stranded stay wire complete as per technical specification and approved drawings.

Credle Guarding for LINE CROSSING as per specifications and approved drawings including instalation of guarding angles & flats, 6 SWG and 8 SWG GI wire mesh (0.5x0.33 m), Turn Buckles, Eye Bolts, between double pole structures and connecting to pole earthing.

Tree Trimming, Cutting, & Clearing Right of Way for new 11 kV Covered Conductor S/C Lines including existing line replacements

carriage of 11 mtr long steel poles

carriage of 9 mtr long steel poles

Carriage of cable cross arm, insulator etc

Carriage of GOS, DOF etc

RCC Base with fancing

Instatlation of VCB

125 mm dia nominal Bore

Please Enable Macros to View BoQ information