Dry -docking repair works of SL Pamba at Yard in Kochi during the year 2025-26

Amount

Charges for Docking / un - docking or beaching / un -beaching of the vessel

Dock hire charges (No extra dock hire charges will be entertained)

Mooring Charges for before and after dry-dock as well as during afloat repair works

Charges for ultrasonic testing (UT Gauging) with the Authorized agency at underwater hull area and above water plates, onboard deck of the vessel properly. The copy of UT Gauge report shall be submitted to the office after completion of UT testing for the vessel immediately.

Dismantling of Top cover of Engine room and removal of both main engine and Auxillary engine, fire pump and other accessories etc for renewal of under water plates in engine room below engines if required. Re fitting and allignment of the dismantled items after renewal of plates and make in good working condition including labour and material charges

Renewal of under and above water level hull and onboard deck steel plates (IS2062) of 5 / 6 mm thick of ship building quality after cropping and removal of the damaged plates by gas cutting without any damages to other fittings & also sections of underwater portion pipe to assed (to be done after getting ultrasonic test report and recommendation of Surveyor, Port Dept, Govt of Kerala) and also Re fabrication damaged anchor plate as per marine standard including labour and material cost

Dismantling of propeller, propeller shafts, checking the trueness of the shaft, re-metalling, NDT testing , renewal of cut less bushes of size: (size: OD: 82 mm, ID: 70 mm,L-218 mm) etc for STBD side only and re-fitting of the same along with propeller after balancing including labour cost

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Dismantling of rudder and rudder stock, inspection of trueness, re-building of the same, fabrication & renewal of bushes, brackets, NDT testing bearings, gland, nut & bolts etc if any and re-fitting Port and STBD of the unit properly after completion of repairs including labour cost

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Overhauling of sea suction and other valves on bilge and fire hydrant valves, cleaning of mud box fittted onboard properly including labour cost

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Renewal and fitting of damaged fuel hand pump with new one

Renewal of RPM meter cables of both main engines and renewal of rpm metre gauge of S.B side engine including labour charges

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Electrical rectification work includes re panelling (fitted in engine room) by checking all the connections in the pannel and renewe the damaged wires, bulbs, voltage fluctuation while connecting to generator issue shall be rectified and also make fully functional in both shore connection while connecting generator and fire & Bilage alaram, damaged bulb and tubes shall be replaced. charges including labour cost

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Renewal of STBD side sea water pump with new one as per sample including labour & Material charges

Strengthening of side railings of onboard including engine room top, wheel house front etc, renewal of M.s Pipe with new ones at damagaed portions properly by croping, welding etc including labour & material cost

Renewal of High pressure over flow (copper) pipes of STBD side engine as per sample including labour and material charges

Renewal of all the MS Sea water pipelines including flanges and end fittings fitted to both the main STBD & Port side engine's & Auxillary engine as per sample including labour and material charges

Fitting of new wooden panellling (flywood of 12 mm) along with glass wool insulation in accomodation area including labour and material charges.

Servicing and cleaning of heat exchangers, oil coolers, seawater pump, and renewal of air, fuel and oil filters of both main engines, the engine oil will be supplied by IWAI. Oil leak arresting by renewal of oil seal. The exhaust pipe cladding shall be renewed with new one properly including labour and machining charges.

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Renewal damaged steel bar (inside of fender) M.S flat 75 X 8 mm thick with nut & bolts with washers & welding works ( 10 mtrs) and also renewal damaged ‘’D’’ type rubber fender of size: 4” x 4” (25 m ) at the damaged portions of fender and re fitting of the fenders in good condition including labour and material cost.

Complete cleaning of external hull of vessel, Chipping, buffing, wire brushing of plate from keel to water level (under water level) properly and Painting of the area with 2 coat of marine epoxy, 2 coat of TBT free antifouling paint including labour and material cost

Chipping, wire brushing, buffing and cleaning of above water level area and complete deck area including winch, air vent pipes, railings, air cows, bollards, anchors etc & Painting of mentioned area & other parts with 2 coat epoxy primer and 2 coat non alkide existing color marine quality paint including writing of vessel name, owners name etc on both STBD side, Port side and front of wheel house in existing style including labour and material cost

Chipping, wire brushing, cleaning & painting with 2 coat of epoxy primer, 2 coat of marine epoxy on other area as indicated below a) Super structure b) Steering gear compartment c) Store, accommodation d) Bathroom e) Fore peak compartment f) Mast g) Engine room inside, top of engine room etc Labour and material cost (for a to g)

Supply & fitting of new Zink anodes (2 Kg. each) in under water plate properly including labour and material cost

Re-writing of vessel name, logo (IWAI), registration no, Port of registry, GRT with size: 200 mm x 20 mm, load line, draft marking (above water level), Fire no: 101, Police no: 100 (both Port and STBD sides) etc properly and also writing on LSA & FFA with vessel name, reg no, port of registry to be marked clear visibility as per KIV rules including labour and material cost

Fabrication and welding of new man hole flange with frame on top of steering gear compartment including labour and material charges

Repair of damaged fire hydrant valves hose fitting locks fitted on on board vessel in good working condition and also repair of fire hose fitting lock including labour and material cost.

Servicing of bilge pump and checking of pipeline and renewal of damaged portions and make in good working condition including labour charges.

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Servicing of gear liver fitted inside wheel house and checking of cables (renewal of cables if need) and make in good working condition including labour charges.

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Overhauling of Seawage pump onboard properly including labour and material cost

Cost of Spare parts will be reimbursed on (Actual+10%) basis

Overhauling of Anchor winch fitted on board vessel including strengthening of frames byrenewal of damaged portion with new one, also greasing of rope including labour and material cost

Renewal of wipper blades with new one including labour and material charges

Renewal of rubber beeding of 2 nos wheel house doors including labour and material charges

Fabrication and fitting of damaged 4 nos air vent in main Deck with new one labour and material charges

Repair & renewal of damaged area of boollard in main deck including labour and material cost.

Relocation of search light labour and material cost.

Cochin Marine (BID ID -3265792)

UNOTECH Marine Engineering and Services Private Limited (BID ID -3265442)