Loading
Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹18.9 L 12 10 2025 | ₹18.9 L |
Tender Value
₹4.5 Cr
EMD Value
₹4.5 L
Closing Date
24 Oct 2025, 11:00 amClosed
Renovation work of sheth M.J. High School and K.B. Shah Vinay Mandir School at Viramgam, Gujarat.
SBG/MUMBAI/PGCIL/NIT/79/2025
SBG/MUMBAI/PGCIL/NIT/79/2025
Open Tender-Domestic
Civil Works General
Ahmadabad, Gujarat
₹11,800
₹4.5 L
16 Jul 2026
9 Oct 2025
24 Oct 2025
24 Oct 2025
19 Nov 2025
ABSTRACT OF COST
S. No. DESCRIPTION
AMOUNT (Rs) AMOUNT (Rs)
1 CONCRETE WORK 474155.50 0.00
2 REINFORCED CEMENT CONCRETE 3840550.00 0.00
3 BRICK WORK 420495.75 0.00
4 CLADDING WORK 447465.00 0.00
5 WOOD AND PVC WORK 891875.70 0.00
9 FINISHING 2874235.00 0.00
10 REPAIRS TO BUILDING 140125.00 0.00
11 DISMANTLING AND DEMOLISHING 963305.30 0.00
13 SANITARY INSTALLATIONS 93385.90 0.00
14 WATER SUPPLY 274257.70 0.00
15 DRAINAGE WORK 384234.75 0.00
16 ALUMINIUM WORK 106390.00 0.00
17 NEW TECHNOLOGIES AND MATERIALS 233942.00 0.00
Repair, rehabilitation and retrofitting of distressed
reinforced concrete structures
19 Solar Photovoltaic Power Plant 610600.00 0.00
20 ELECTRICAL WORK 255016.00 41439.00
Modified Estimated Cost after using Correction factor on
DSR 2023 on account of GST @0.973
TOTAL OF DSR/ NDSR ITEMS 1,99,99,754.00
Digitally signed by SHUBHAM
NBCC (India) Limited
(A GOVERNMENT OF INDIA ENTERPRISE)
RENOVATION WORK OF K.B.SHAH VINAY MANDIR AT VIRAMGAM
ABSTRACT OF COST
S. No. DESCRIPTION
AMOUNT (Rs) AMOUNT (Rs)
1 CONCRETE WORK 656523.00 0.00
2 REINFORCED CEMENT CONCRETE 5619262.50 0.00
3 BRICK WORK 614630.50 0.00
4 CLADDING WORK 982880.60 0.00
5 WOOD AND PVC WORK 1504908.40 0.00
9 FINISHING 3312223.50 0.00
10 REPAIRS TO BUILDING 84075.00 0.00
11 DISMANTLING AND DEMOLISHING 1213975.25 0.00
13 SANITARY INSTALLATIONS 137912.45 0.00
14 WATER SUPPLY 257217.95 0.00
15 DRAINAGE WORK 78424.20 0.00
16 ALUMINIUM WORK 106390.00 0.00
17 NEW TECHNOLOGIES AND MATERIALS 370776.00 0.00
Repair, rehabilitation and retrofitting of distressed
reinforced concrete structures
19 Solar Photovoltaic Power Plant 610600.00 0.00
20 ELECTRICAL WORK 897164.00 206015.00
Modified Estimated Cost after using Correction factor
on DSR 2023 on account of GST @0.973
TOTAL OF DSR/ NDSR ITEMS 2,49,59,651.00
Digitally signed by SHUBHAM
NBCC (India) Limited
(A GOVERNMENT OF INDIA ENTERPRISE)
RENOVATION WORK OF SHETH M.J.HIGH SCHOOL AT VIRAMGAM.
BILL OF QUANTITIES
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
1 4.1 Providing and laying in position cement concrete of specified grade excluding
the cost of centring and shuttering - all work upto plinth level.
4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 CUM 65.00 7294.70 0.00 474155.50 0.00
graded stone aggregate 20 mm nominal size derived from natural sources)
CONCRETE WORK TOTAL 474155.50 0.00
REINFORCED CONCRETE WORK
2 5.1 Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural CUM 100.00 9045.75 0.00 904575.00 0.00
sources : 3 graded stone aggregate 20 mm nominal size de rived from natural
3 5.9 Centering and shuttering including strutting, propping etc. and removal of form
5.9.3 Suspended floors roofs, landings, balconies & access platform. SQM 900.00 927.25 0.00 834525.00 0.00
5.9.5 Lintels, beams, plinth beams, girders, bressumers and SQM 250.00 736.40 0.00 184100.00 0.00
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. SQM 150.00 961.30 0.00 144195.00 0.00
5.9.19 Weather shade, Chajjas, corbels etc., including edges. SQM 50.00 951.10 0.00 47555.00 0.00
4 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete above plinth level.
5.22 A.6 Thermo-Mechanically Treated bars. KG 16000.00 107.85 0.00 1725600.00 0.00
REINFORCED CONCRETE WORK TOTAL 3840550.00 0.00
5 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in all
shapes and sizes in :
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 45.00 9344.35 0.00 420495.75 0.00
BRICK WORK TOTAL 420495.75 0.00
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
6 8.2 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for
wall lining (veneer work), backing filled with a grout of average 12 mm thick in
cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white
cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of
pigment to match the marble shade (To be secured to the backing by means of
cramps, which shall be paid for separately).
8.2.2 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
7 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,
including machine polishing to edge to give high gloss finish etc.complete as
per design approved by Engineer-in-Charge.
8 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: SQM 150.00 1267.95 0.00 190192.50 0.00
15622 (thickness to be specified by the manufacturer), of approved make, in all
colours, shades except burgundy, bottle green, black of any size as approved by
Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed
of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement
slurry @ 3.3kg per sqm, including pointing in white cement mixed with
pigment of matching shade
9 8.10 Providing and fixing stone slab with table rubbed, edges rounded and
polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by
cutting a chase of appropriate width with chase cutter and embedding the stone
in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of
Engineer-in-charge and finished smooth.
8.10.2 Granite Stone of approved shade SQM 10.00 4051.85 0.00 40518.50 0.00
CLADDING WORK TOTAL 447465.00 0.00
WOOD AND PVC WORK
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
10 9.1 Providing wood work in frames of doors, windows, clerestorey windows and
another frames, wrought framed and fixed in position with hold fast lugs or with
dash fasterners of requires dia & length ( hold fast lugs or dash fasterner shall
be paid for separately).
11 9.5 Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows, fixing with butt hinges of required size
with necessary screws, excluding panelling which will be paid for
separately, all complete as per direction of Engineer-in-charge. (Note: Butt
hinges and necessary screws shall be paid separately)
9.5.1 Second class teak wood
12 9.20 Providing and fixing ISI marked flush door shutters conforming to IS: 2202
(Part I) decorative type, core of block board construction with frame of 1st class
hard wood and well matched teak 3 ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary sqm 75.00 3473.85 0.00 260538.75 0.00
13 9.22 Extra for Providing and fixing flush doors with decorative veneering instead of
non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
14 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum sqm 75.00 462.35 0.00 34676.25 0.00
depth on all edges of flush door shutters (over all area of door shutter to be
15 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc.
with M.S. flats, square or round bars etc. including priming coat with approved
steel primer all complete.
9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. KG 150.00 238.35 0.00 35752.50 0.00
16 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to
required colour or shade with nuts and screws etc. complete :
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
17 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade with necessary screws etc. complete :
18 9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating
not less than grade AC 10 as per IS : 1868) transparent or dyed to required
colour or shade with necessary screws etc. complete :
Providing and fixing aluminium hanging floor door stopper ISI marked
anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent
or dyed to required colour and shade with necessary screws etc.complete.
9.101.2 Twin rubber stopper Each 20.00 72.35 0.00 1447.00 0.00
20 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a Rmt 45.00 492.70 0.00 22171.50 0.00
wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet,
mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm
M.S. square tube, the vertical door frame profiles to be reinforced with 19x19
mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be
provided throughout the frame. The door frame to be fixed to the wall using
M.S. screws of 65/100 mm size, complete as per manufacturer’s specification
and direction of Engineering-Charge.
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
21 9.120 Providing and fixing factory made panel PVC door shutter consisting of frame
made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for
styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of
steel primers of approved make and manufacture. M.S. frame covered with 5
mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm
width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree
angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out
of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the
inner side to form top and bottom rail and 115 mm wide PVC sheet out of
which 75 mm shall be flat and 20 mm shall be tapered on both sides to form
lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10
mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert
for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be
fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2
mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together
with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm
width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent
adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s
specification & drawing.
9.120.2 30 mm thick pre laminated PVC door shutters Sqm 10.00 3663.80 0.00 36638.00 0.00
WOOD WORKS TOTAL 891875.70 0.00
22 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete.
10.16.1 Hot finished welded type tubes kg 2500.00 194.40 0.00 486000.00 0.00
23 10.25 Steel work welded in built up sections/ framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel primer
using structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 950.00 172.60 0.00 163970.00 0.00
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
24 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, KG 500.00 772.40 0.00 386200.00 0.00
channels, plates etc., including welding, grinding, buffing, polishing and
making curvature (wherever required) and fitting the same with necessary
stainless steel nuts and bolts complete, i/c fixing the railing with necessary
accessories & stainless steel dash fasteners , stainless steel bolts etc., of required
size, on the top of the floor or the side of waist slab with suitable arrangement
as per approval of Engineer-in-charge, ( for payment purpose only weight of
stainless steel members shall be considered excluding fixing accessories such as
nuts, bolts, fasteners etc.).
STEEL WORKS TOTAL 1036170.00 0.00
25 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed
with grey cement slurry mixed with pigment to match the shade of the slab,
including rubbing and polishing complete with base of cement mortar 1 : 4 (1
cement : 4 coarse sand) :
26 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on SQM 80.00 2354.70 0.00 188376.00 0.00
12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and
jointed with grey cement slurry mixed with pigment to match the shade of the
slabs, including rubbing and polishing complete.
27 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm SQM 75.00 1439.40 0.00 107955.00 0.00
or more (thickness to be specified by the manufacturer), of 1st quality
conforming to IS : 15622, of approved make, in all colours, shades, except
White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4
(1 Cement : 4 Coarse sand), including pointing the joints with white cement and
matching pigments etc., complete.
28 11.41A Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS : 15622, of approved make, in all colours and shades,laid on
20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting
the joints with white cement and matching pigments etc., complete.
11.41A.1 Double charge vitrified tile polished finish of size
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
29 11.47 Providing and laying Vitrified tiles in different sizes (thickness to be specified
by the manufacturer), with water absorption less than 0.08% and conforming to
IS: 15622, of approved brand & manufacturer, in all colours and shade, in
skirting, riser of steps, laid with cement based high polymer modified quick set
tile adhesive (water based) conforming to IS: 15477, in average 6 mm
thickness, including grouting of joints (Payment for grouting of joints to be
made separately).
30 11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy
grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of
hardener and 0.20 kg of resin per kg), including filling / grouting and finishing
complete as per direction of Engineer-in-charge.
31 11.50 Deduct for not grouting the joints with white cement and matching pigment in sqm 100.00 13.30 0.00 1330.00 0.00
the items of fixing of vitrified tiles.
FLOORING WORKS TOTAL 2485750.00 0.00
32 NS Providing and fixing external sheeting of Corrugated GALVALUME Colour SQM 625.00 0.00 1073.80 0.00 671125.00
Coated (Paint-Super Durable Polyester, Top Side- Primer paint + polyester
paint coating 25 microns minimum, Back side Primer epoxy 10 microns
minimum) sheet -0.60 mm minimum thickness and minimum yield strength 550
MPa coated with coating of AZ150 class @ 150 gms/sqm (The alloy- coated
product contains 55% aluminium, 43.5% zinc and 1.5% silicon by weight) with
effective cover width of 1000-1020 mm, 30 mm crest, 250-255 mm wide pans
having special male/female side laps with anti-siphoning features to avoid
leakages, including drilling holes to purlins/truss members as required, fixing to
purlins/truss members with necessary hex head screw, polymer coated J or L
hooks, bolts and nuts etc. of any size & type as per requirement etc. all
complete (nothing shall be extra paid to the contractor except wind ties) as per
manufacturers specifications, approved drawings and as directions of Engineer-
33 12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. mtr 110.00 195.60 0.00 21516.00 0.00
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
34 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A including jointing with seal ring conforming
to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.
35 12.42 Providing and fixing on wall face unplasticised - PVC moulded
fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to
IS : 13592 Type A including jointing with seal ring conforming to IS :5382
leaving 10 mm gap for thermal expansion.
12.42.6 Shoe (Plain)
36 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to
unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood
plugs, screwed with M.S. screws of required length including cutting brick work
and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the
wall etc. complete.
ROOFING WORKS TOTAL 69824.40 671125.00
FINISHING WORKS
37 13.1 12 mm cement plaster of mix:
38 13.8 15 mm cement plaster on rough side of single or half brick wall finished with a
floating coat of neat cement of mix :
39 13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 SQM 1950.00 537.45 0.00 1048027.50 0.00
(1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1
cement : 3 coarse sand) finished rough with sponge.
40 13.16 6 mm cement plaster of mix:
41 13.62 Painting with synthetic enamel paint of approved brand and manufacture to give
13.62.1 Two or more coats on new work. SQM 850.00 226.25 0.00 192312.50 0.00
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
42 13.80 Providing and applying white cement based putty of average thickness 1 mm, of SQM 2550.00 156.05 0.00 397927.50 0.00
approved brand and manufacturer, over the plastered wall surface to prepare the
surface even and smooth complete.
43 13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC
content less than 50 gms/litre, of approved manufacturer, of required shade and
colour complete, as per manufacturer's specification.
13.41.1 New work (two or more coats) over and including water thinnable priming coat SQM 2550.00 185.65 0.00 473407.50 0.00
with cement primer having VOC content less than 50 gms/litre
44 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including SQM 2350.00 160.60 0.00 377410.00 0.00
priming coat of exterior primer applied @ 0.90 litre/10 sqm)
45 13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required, to achieve
even shade and colour.
46 13.69 Polishing on wood work with ready mixed wax polish of approved brand and
47 13.85 Applying priming coats with primer of approved brand and manufacture, having
low VOC (Volatile Organic Compound ) content.
13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) SQM 200.00 70.35 0.00 14070.00 0.00
having VOC content less than 50 grams/ litre
FINISHING WORKS TOTAL 2874235.00 0.00
REPAIRS TO BUILDING
48 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5
sq.meters and under, including cutting the patch in proper shape, raking out
joints and preparing and plastering the surface of the walls complete, including
disposal of rubbish to the dumping ground, all complete as per direction of
Engineer-in-Charge.
14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) Sqm 250.00 560.50 0.00 140125.00 0.00
REPAIRS TO BUILDING TOTAL 140125.00 0.00
DISMANTLING AND DEMOLISHING
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
49 15.2 Demolishing cement concrete manually/ by mechanical means including
disposal of material within 50 metres lead as per direction of Engineer - in -
15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 70.00 1503.60 0.00 105252.00 0.00
50 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking Cum 120.00 3551.25 0.00 426150.00 0.00
of steel bars and disposal of unserviceable material within 50 metres lead as per
direction of Engineer - in- charge.
51 15.7 Demolishing brick work manually/ by mechanical means including stacking of
serviceable material and disposal of unserviceable material within 50 metres
lead as per direction of Engineer-in-charge.
52 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter
including chowkhats, architrave, holdfasts etc. complete and stacking within 50
15.12.1 Of area 3 sq. metres and below Each 79.00 367.20 0.00 29008.80 0.00
15.12.2 Of area beyond 3 sq. metres Each 30.00 502.75 0.00 15082.50 0.00
53 15.13 Taking out doors, windows and clerestory window shutters (steel or wood)
including stacking within 50 metres lead :
15.13.1 Of area 3 sq. metres and below Each 10.00 143.50 0.00 1435.00 0.00
15.13.2 Of area beyond 3 sq. metres Each 10.00 188.90 0.00 1889.00 0.00
54 15.56 Dismantling old plaster or skirting raking out joints and cleaning the SQMT 3500.00 54.65 0.00 191275.00 0.00
surface for plaster including disposal of rubbish to the dumping ground within
50 metres lead.
55 15.23 Dismantling tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm sqm 1150.00 73.40 0.00 84410.00 0.00
Disposal of building rubbish / malba / similar unserviceable, dismantled or
waste materials by mechanical means, including loading, transporting,
unloading to approved municipal dumping ground or as approved by Engineer-
in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
DISMANTLING AND DEMOLISHING TOTAL 963305.30 0.00
57 16.3 Supplying and stacking at site.
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
58 16.68 Providing and laying 60mm thick faciory made cement concrete interlocking sqmt 550.00 972.00 0.00 534600.00 0.00
paver block of M -30 grade made by block making machine with strong
vibratory compaction, of approved size, design & shape, laid in required colour
and pattern over and including 50mm thick compacted bed of coarse sand,
filling the joints with line sand etc. all complete as per the direction of
Engineer-in-charge.
59 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 Cum 45.00 10117.60 0.00 455292.00 0.00
grade cement concrete in position to the required line, level and curvature,
jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making
joints with or without grooves (thickness of joints except at sharp curve shall
not to more than 5mm), including making drainage opening wherever required
complete etc. as per direction of Engineer-in-charge (length of finished kerb
edging shall be measured for payment). (Precast C.C. kerb stone shall be
approved by Engineer-in-charge).
ROAD WORKS TOTAL 1338867.00 0.00
SANITARY INSTALLATIONS
60 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with
100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled device (handle lever)
conforming to IS:7231, with all fittings & fixtures complete including cutting
and making good the walls and floors wherever required.
17.1.1 White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral EACH 3.00 6767.40 0.00 20302.20 0.00
type foot rests.
Providing and fixing white vitreous china pedestal type water closet (European
type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled device (handle lever),
conforming to IS : 7231, with all fittings and fixtures complete, including
cutting and making good the walls and floors wherever required :
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid EACH 4.00 6515.55 0.00 26062.20 0.00
62 17.7 Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings
and brackets, cutting and making good the walls where required :
17.7.4 White vitreous china flat back wash basin size 550 x 400 mm with single 15 EACH 2.00 1879.20 0.00 3758.40 0.00
mm C.P. brass pillar taps.
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
63 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making good the walls
wherever required :
17.10.2 Kitchen sink without drain board
64 17.24 Providing and fixing white vitreous china squatting plate urinal with integral EACH 2.00 4048.65 0.00 8097.30 0.00
rim longitudinal flush pipe.
65 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of each 2.00 1607.95 0.00 3215.90 0.00
approved quality) complete with 6 mm thick hard board ground fixed to
wooden cleats with C.P. brass screws and washers complete.
66 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings arrangement of
approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm EACH 4.00 673.40 0.00 2693.60 0.00
wide and effective height of 88 mm, weighing not less than
67 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, EACH 5.00 1083.50 0.00 5417.50 0.00
supported on anodised aluminium angle frame with C.P. brass brackets and
guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
68 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged
grating with or without vent arm complete, including cost of cutting and making
good the walls and floors :
17.60.1 100 mm inlet and 100 mm outlet
SANITARY INSTALLATIONS TOTAL 93385.90 0.00
WATER SUPPLY WORK
69 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot and cold water supply, including all CPVC plain and
brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing.
This includes jionting of pipes and fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the same including testing of
joints complete as per the direction of engineer incharge
concealed work, including cutting chases and making good the wall etc.
18.8.1 15 mm nominal outer dia pipes RMT 50.00 497.80 0.00 24890.00 0.00
18.8.3 25 mm nominal outer dia pipes RMT 50.00 627.25 0.00 31362.50 0.00
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
18.8.4 32 mm nominal outer dia pipes RMT 50.00 739.30 0.00 36965.00 0.00
70 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain & brass
threaded fittings. This includes jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling and testing of joints complete as per
direction of Engineer in Charge.
18.9.6 50 mm nominal outer dia Pipes RMT 50.00 794.25 0.00 39712.50 0.00
71 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed ends):
72 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage per litre 10000.00 11.00 0.00 110000.00 0.00
tank, IS : 12701 marked, with cover and suitable locking arrangement and
making necessary holes for inlet, outlet and overflow pipes but without fittings
and the base support for tank.
73 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to
74 18.51 Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
75 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points
of approved quality conforming to IS 8931 a) 15 mm nominal bore.
WATER SUPPLY TOTAL 274257.70 0.00
76 19.1 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff
mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand)
including testing of joints etc. complete :
77 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand
: 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
including bed concrete as per standard design :
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
78 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with
C.I. grating brick masonry chamber with water tight C.I. cover with frame of
300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and
frame to be not less than 2.70 kg as per standard design:
19.4.2 150 x 100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
79 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse
sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1
cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside
plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making channels in cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size) finished with a floating coat of neat cement complete as per
standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover and frame to be
not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 5.00 12770.55 0.00 63852.75 0.00
Constructing brick masonry chamber for underground C.I. inspection
chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand)
C.I. cover with frame (light duty) 455x610 mm internal dimensions, total
weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine
sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm
nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand), finished smooth with a floating coat of neat cement on
walls and bed concrete etc. complete as per standard design:
19.30.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
DRAINAGE WORK TOTAL 384234.75 0.00
81 21.1 Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS:
1285, fixing with dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides with required
EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust
free, straight, mitred and jointed mechanically wherever required including
Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel
screws, all complete as per architectural drawings and the directions of
Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for
21.1.1 For fixed portion
21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder KG 50.00 539.85 0.00 26992.50 0.00
coating 50 micron)
21.1.2 For shutters of doors, windows & ventilators including providing and fixing
hinges/ pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber / neoprene gasket required (Fittings shall be
paid for separately)
21.1.2.3 Polyester powder coated aluminium (minimum thickness KG 100.00 643.45 0.00 64345.00 0.00
of polyester powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete
as per the architectural drawings and the directions of engineer-in- charge .
(Cost of aluminium snap beading shall be paid in basic item):
21.3.2 With float glass panes of 5 mm thickness Sq.m 10.00 1505.25 0.00 15052.50 0.00
ALUMINIUM WORK TOTAL 106390.00 0.00
NEW TECHNOLOGIES AND MATERIALS
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
Providing and fixing false ceiling at all heights with integral densified
calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size
595x595 mm of approved texture, design and patterns as per CPWD
Specification 2019, to be laid in true horizontal level suspended on inter-
locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick
(galvanized @ 120 grams per sqm including both sides)comprising of main-
T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of
length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length
600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling
using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50
mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm
length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and
Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange
to pierce into 12x50 mm or evento the styles & rails with 7 mm (5 mm+2 mm)
thick x 15 mm wide PVC sheet beading on inner side, and joined together with
solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width
is to be stuck on the interior side of the ‘C’ Channel using PVC solvent
adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s
specification & drawing. If
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles
NEW TECHNOLOGIES AND MATERIALS WORK TOTAL 233942.00 0.00
Sub Head:- Repair, rehabilitation and retrofitting of distressed reinforced
concrete structures
REPAIRS & RETROFITTING:
84 NS Anticorrosive Treatment to Steel: Providing and applying single coat of zinc SqM 750.00 340.00 0.00 255000.00
rich anti corrosive coating such as nitozinc primer in 40 micron thickness to the
exposed reinforcing bars after application of alkaline rust remover on main and
lateral links all complete as per the manufacturing specifications and as per the
direction the Engineer-in-charge.
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
Anti-corrosive epoxy zinc rich coating: Providing & applying inhibition
coats/system to exposed reinforcement bars after drying & also new bars after
cleaning & removing scales and rust completely as specified. Nitozinc Primer-
Two component epoxy zinc rich primer supplied in 1 and 5 Litre pack, two
component systems based on metallic zinc and epoxy resin which on mixing
gives a grey coloured liquid. An Anti corrosive coat contents Active 'Zinc-rich'
system which combats corrosion by electro chemical means. Having specific
gravity of 1.75, Adhesive bond strength > 1.5 N/mm2 Solid content- 60 %,
Fully dry/Recoatable- 45 minutes to 1 hour. Typical application includes
surface preparations by cleaning steel surface to a bright condition paying
particular attention to the back of exposed steel bars, mixed two components
slow speed heavy duty drill fitted with a paddle, applying unbroken coat of 100
microns WFT with suitable brush coverage @ 4-5 m2/ltr and allow to dry, after
30 mins apply second coat to ensure complete cover to exposed steel/ rebar etc.
complete. Total Dry film thickness is 40 microns/coat.
HSE Guidelines : Nitozinc Primer and Nitoflor Sol should not come in contact
with the skin and eyes, or be swallowed. Adequate ventilation
should be ensured and inhalation of vapours should be avoided. Suitable
protective clothing, gloves and eye protection shall be worn. If working in
confined areas, suitable respiratory protective equipment must be used. The use
of barrier creams, provide additional skin protection. In case of contact with
skin, it shall be rinsed with plenty of water, and then cleansed with soap and
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
85 NS Micro concrete : Polymer Modified Micro- Concrete: Providing and Ton 20.00 26000.00 0.00 520000.00
laying of polymer modified micro- concrete like Emaco S46 T of
BASF/Renderoc RG (S) of Fosroc/ReCon MC 40 of Conmix or
equivalent material blended with washed, saturated surface-dry (SSD), graded,
low absorption, high density aggregates of size 8 mm & below up to 50%
(as and when required) by weight of micro-concrete and water at 4 lit. per 25
kg bag and pouring into the form work using suitable pumping device for
uniform flow of concrete. The side shuttering can be removed after 3 days
and the bottom shuttering after 7 days ensuring proper bond between the
micro concrete and existing concrete substrate. Item rate inclusive of all
materials, labours, supervision, tools, tackles, transportation, curing, making of
hole etc. Complete as per the manufacturing specification and as per the
direction the Engineer-in-charge.
86 NS Corrosion Inhibitor: Providing & applying bipolar migrating corrosion Sqm 450.00 125.00 0.00 56250.00
inhibition treatment to the overall concrete surface repair area including area
where reinforcement is exposed. The product shall be as per specifications ,Item
rate is inclusive of the materials, all labour, supervision, tools and tackles and
transportation etc., complete as per specification and as direction of engineer in
87 NS Single Part PMM Treatment: Providing and laying of polymer
modified single component, alkaline resistant fibre reinforced, duel
shrinkage-compensated, thixotropic, cementations patch repair mortar
Emaco S48CT of BASF/ Renderoc SP 40 of Fosroc or equivalent material
that achieves compressive strength of 35 MPa at 7 days and finishing
with trowel carefully compacting the same around the rebars and finishing
to bring it in line with existing concrete surface on the beams, slabs. pile caps
etc., where the thickness of application is less than 50mm in patches
as per specification after applying bonding coat (bonding coat shall be
payable separately). Item rate inclusive of all materials, labours,
supervision, tools, tackles, etc., complete as per the manufacturing
specification and as per the direction the Engineer-in-charge.
NS (a) For Built up thickness of up to 40 mm (incl.+5mm) Sqm 50.00 2100.00 0.00 105000.00
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
Polymer modified Mortar-Patch repair (Up to Grade M45): Providing and
laying Renderoc SP 40- shrinkage controlled polymer modified single
component, alkaline resistant fibre reinforced, thixotropic, cementitious patch
repair mortar supplied in 25 kg moisture resistant bag when mixed with clean
water at w:p ratio 0.18, achieves compressive strength (BS 1881 Pt.116) -> 20
Mpa at 1 day & > 45 Mpa at 28 days, Tensile Strength(BS 6319 Pt.7) > 2.5 Mpa
at 28 Days, Flexural Strength(BS 6319 Pt.3)>7 Mpa at 28 days, Drying
shrinkage to ASTM C 157-93, 28 days < 1000 microstrain capable of applying
up to 50 mm thickness in single layer. Renderoc SP 40 shall have CE (CE-
29842) marking and compliance according to Construction Products Directive
89/106/EEC (CPD). Typical application includes mixing entire bag with clean
water about 4.25L to 4.5 L, mixed in suitable container with heavy duty slow
speed mixer machine to achieve uniform lump free mortar consistency, placing
over prepared surface or tacky Nitobond EP surface in recommended thickness
and finishing with trowel carefully compacting around the rebars to bring it in
line with existing concrete surfaces on the beams, slabs, piles etc. Item rate is
inclusive of materials all labour, tools and tackles, scaffolding and
transportation etc. complete as per specification and as directed by Engg.-in-
HSE Guidelines : Recommended to wear tight-fitting, dust-resistant, chemical
splash goggles and mask if airborne dust is generated, Wear protective gloves.
Wear appropriate clothing to prevent any possibility of skin contact.
Total Sub Head:- Repair, rehabilitation and retrofitting of distressed 0.00 936250.00
reinforced concrete structures
Solar Photovoltaic Power Plant
88 1 Supply, Installation, Testing and Commissioning of on grid Solar Photovoltaic
Power Plant conforming to MNRE specifications as amended, consisting of
Mono/Poly Crystalline silicon solar cells, net metering facility, necessary
protections, earthing, mounted on Aluminium/GI structure of suitable strength
with following components complete as required
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in
India, conforming to IS 14286/ IEC61215,IS/ IEC61730-Part-1,IS/ IEC61730-
Part-2. Solar Photovoltaic Module conversion efficiency shall not be less
than16.5%.PV modules used in solar power plants/systems must be warranted
for their output peak watt capacity, which should not be less than 90% attheend
of 10 years and 80 % attheend of 25 years
b) Power Conditioning Unit (PCU)of350-800 V DC Input voltage range and
400 V AC, three phase, 4wire, 50Hz+/-2.5 Hz, output voltage suitable to
generate AC Power with efficiency not less than 97%, total harmonic distortion
less than 3% and suitable for ambient temperature from 0to50 degree C. The
PCU shall adjust the voltage and frequency level to suit the Grid Voltage
.c) Data Monitoring System complete with accessories.
d) Fixing of Array junction box & Main junction box with IP65 protection and
termination arrangement for incoming and outgoing cable along with glands,
lugs and other accessories etc. as required
e) Lightning and surge voltage protection
f) Connections & Interconnections by supplying & fixing required size XLPE
insulated copper conductor 1.1Kv grade armoured power and control cables
between solar modules, main power cable to grid supply PCU unit along with
supplying & fixing of necessary channel/conduit lugs and other accessories etc.
g) system Earthing as required kw 10.00 61060.00 0.00 610600.00 0.00
Solar Photovoltaic Power Plant Total 610600.00 0.00
ELECTRICAL WORK
[Q] SUB HEAD: WIRING : WIRING IN PVC CONDUIT
89 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
90 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper Point 10.00 1562.00 0.00 15620.00 0.00
conductor single core cable in surface / recessed medium class PVC conduit, 2
way modular switch, modular plate, suitable GI box and earthing the point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as
91 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper Metre 80.00 334.00 0.00 26720.00 0.00
conductor single core cable in surface/ recessed medium class PVC conduit
alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core
cable for loop earthing as required.
92 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes
of FRLS PVC insulated copper conductor, single core cable in surface/ recessed
medium class PVC conduit as required
93 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper 0.00 0.00
conductor .single core cable in the existing surface / recessed steel / PVC
conduit as required.
94 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper Metre 50.00 47.00 0.00 2350.00 0.00
conductor PE insulated, shielded with fine tinned copper braid and protected
with PVC sheath in the existing surface/ recessed steel/ PVC conduit as
95 1.21 Supplying and fixing of following sizes of medium class PVC conduit along
with accessories in surface/recess including cutting the wall and making good
the same in case of recessed conduit as required
96 1.24 Supplying and fixing following modular switch/socket on the existing Modular
plate & switch box including connection but excluding modular plate etc. as
97 1.25 Supplying and fixing two module stepped type electronic fan regulator on the Each 10.00 369.00 0.00 3690.00 0.00
existing modular plate switch box including connections but excluding modular
plate etc. as required.
98 1.26 Supplying and fixing two module blanking plate on the existing modular plate Each 10.00 40.00 0.00 400.00 0.00
& switch box excluding modular plate etc. as required.
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
99 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front Each 10.00 477.00 0.00 4770.00 0.00
on surface or in recess, including providing and fixing 3 pin 5/6 A modular
socket outlet and 5/6 A modular switch, connections etc. as required.
100 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front Each 10.00 586.00 0.00 5860.00 0.00
on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A
modular socket outlet and 15/16 A modular switch, connections etc. as
101 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ Each 10.00 87.00 0.00 870.00 0.00
wooden block including connections etc. as required.
102 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes Each 50.00 119.00 0.00 5950.00 0.00
and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with
all accessories including connections etc. as required.
103 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete Each 1.00 99.00 0.00 99.00 0.00
104 1.44 Installation, testing and commissioning of ceiling fan, including wiring the Each 10.00 213.00 0.00 2130.00 0.00
down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable etc. as required.
105 1.50 Installation of exhaust fan in the existing opening, including making good the
damage, connection, testing, commissioning etc. as required.
106 1.58 Supplying and fixing PVC batten/ angle holder including connection etc. as Each 10.00 110.00 0.00 1100.00 0.00
107 2.30 Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without MCB/RCCB/Isolator)
108 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the
existing MCB DB complete with connections, testing and commissioning etc.
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
109 2.13 Supplying and fixing following rating, four pole, 415 V, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as
110 Non-Sch. Supplying of pre-wired fittings complete with all accessories like choke, tube,
capacitor and starter as required.Tube light with fixtures and fittings complete
a) Supply Batten for LED tube light batten light fixture complete with 1x20W Each 10.00 0.00 271.40 0.00 2714.00
LED .nxt LED 20 Retro Bar Professional 111338 WH 6000K approved
b) Supplying of 5 Watt/7 Watt /9 Watt LED Lamp as per required. Each 10.00 0.00 413.00 0.00 4130.00
111 Non-Sch. Supplying of ceiling fan 1200 mm. sweep 3 Nos. blade (white colour) Each 10.00 0.00 2950.00 0.00 29500.00
including all accessories, double ball bearing with 400 w electronic type fan
regulator, suitable for operation on 230 v single phase, 50 Hz AC supply etc.
complete of approved make as per site requirement.Crompton, Phillips, Orient
112 Non-Sch. Supply and fixing of DING -DONG BELL as per site required. Each 1.00 0.00 295.00 0.00 295.00
113 Non-Sch. Supply and fixing of 63 amp.-LT Change over switch. Set 2.00 0.00 2400.00 0.00 4800.00
114 5.4 Earthling with G.I earth plate 600mm x 600mm x 6 mm thick including Set 5.00 7472.00 0.00 37360.00 0.00
accessories, and providing masonary enclosure with cover plate having locking
arrangement and watering pipe of 2.7 meter long etc.with charcoal/coke and salt
115 5.7 Supplying and laying 6 SWG G.I wire at 0.50 meter below ground level for Meter 50.00 51.00 0.00 2550.00 0.00
conductor earth electrode ,including connection /termination with G.I thimble
etc. as required.
116 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for Metre 10.00 244.00 0.00 2440.00 0.00
connections etc. as required.
ELECTRICAL WORK TOTAL 255016.00 41439.00
117 NS Providing & supplying classroom bench for student ( wooden desk & ms pipe ) No. 200.00 0.00 4040.00 0.00 808000.00
118 NS Providing & fixing RCC folding partition wall for compound wall with 1.2 mtr sqmt. 624.00 0.00 1161.50 0.00 724776.00
hight & vertical post at 2.5mtr. c/c with all fixing etc. comp.
119 NS CCTV camera with all fitting & fixing No. 25.00 0.00 7575.00 0.00 189375.00
120 NS providing & supplying UPS battery for computer & smart room TV No. 1.00 0.00 33330.00 0.00 33330.00
Digitally signed by SHUBHAM
Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)
Description of item
ITEM NO. DSR NDSR DSR NDSR
Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following
capacity with necessary clamp made from 50x6mm M.S. IS 7285, 4.5kg
122 NS Supplying & erecting ABC powder type fire extinguisher as per IS 4308, with No. 10.00 0.00 3366.33 0.00 33663.30
necessary clamp for eractionon wall, 6.0kg
NS ITEMS TOTAL 0.00 1867692.00
Digitally signed by SHUBHAM
NBCC (India) Limited
(A GOVERNMENT OF INDIA ENTERPRISE)
RENOVATION WORK OF K.B.SHAH VINAY MANDIR AT VIRAMGAM
BILL OF QUANTITIES
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
1 4.1 Providing and laying in position cement concrete of specified grade excluding
the cost of centring and shuttering - all work upto plinth level.
4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 CUM 90.00 7294.70 0.00 656523.00 0.00
graded stone aggregate 20 mm nominal size derived from natural sources)
CONCRETE WORK TOTAL 656523.00 0.00
REINFORCED CONCRETE WORK
2 5.1 Providing and laying in position specified grade of reinforced cement
concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural CUM 150.00 9045.75 0.00 1356862.50 0.00
sources : 3 graded stone aggregate 20 mm nominal size de rived from natural
3 5.9 Centering and shuttering including strutting, propping etc. and removal of form
5.9.3 Suspended floors roofs, landings, balconies & access platform. SQM 1400.00 927.25 1298150.00 0.00
5.9.5 Lintels, beams, plinth beams, girders, bressumers and SQM 250.00 736.40 184100.00 0.00
5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. SQM 150.00 961.30 144195.00 0.00
5.9.19 Weather shade, Chajjas, corbels etc., including edges. SQM 50.00 951.10 47555.00 0.00
4 5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete above plinth level.
5.22 A.6 Thermo-Mechanically Treated bars. KG 24000.00 107.85 0.00 2588400.00 0.00
REINFORCED CONCRETE WORK TOTAL 5619262.50 0.00
5 6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 20.00 7370.65 0.00 147413.00 0.00
6 6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level up to floor V level in all
shapes and sizes in :
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 50.00 9344.35 0.00 467217.50 0.00
BRICK WORK TOTAL 614630.50 0.00
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
7 8.2 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for
wall lining (veneer work), backing filled with a grout of average 12 mm thick in
cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white
cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of
pigment to match the marble shade (To be secured to the backing by means of
cramps, which shall be paid for separately).
8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
8 8.3 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,
including machine polishing to edge to give high gloss finish etc.complete as
per design approved by Engineer-in-Charge.
9 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: SQM 130.00 1267.95 0.00 164833.50 0.00
15622 (thickness to be specified by the manufacturer), of approved make, in all
colours, shades except burgundy, bottle green, black of any size as approved by
Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed
of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement
slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment
of matching shade
10 8.10 Providing and fixing stone slab with table rubbed, edges rounded and
polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by
cutting a chase of appropriate width with chase cutter and embedding the stone
in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-
in-charge and finished smooth.
8.10.2 Granite Stone of approved shade SQM 6.00 4051.85 0.00 24311.10 0.00
CLADDING WORK TOTAL 982880.60 0.00
WOOD AND PVC WORK
11 9.1 Providing wood work in frames of doors, windows, clerestorey windows and
another frames, wrought framed and fixed in position with hold fast lugs or with
dash fasterners of requires dia & length ( hold fast lugs or dash fasterner shall
be paid for separately).
12 9.5 Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows, fixing with butt hinges of required size
with necessary screws, excluding panelling which will be paid for
separately, all complete as per direction of Engineer-in-charge. (Note: Butt
hinges and necessary screws shall be paid separately)
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
9.5.1 Second class teak wood
13 9.20 Providing and fixing ISI marked flush door shutters conforming to IS: 2202
(Part I) decorative type, core of block board construction with frame of 1st class
hard wood and well matched teak 3 ply veneering with vertical grains or cross
bands and face veneers on both faces of shutters.
9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary sqm 110.00 3473.85 0.00 382123.50 0.00
14 9.22 Extra for Providing and fixing flush doors with decorative veneering instead of
non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
15 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum sqm 110.00 462.35 0.00 50858.50 0.00
depth on all edges of flush door shutters (over all area of door shutter to be
16 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc.
with M.S. flats, square or round bars etc. including priming coat with approved
steel primer all complete.
9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. KG 120.00 238.35 0.00 28602.00 0.00
17 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed to
required colour or shade with nuts and screws etc. complete :
18 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to
required colour or shade with necessary screws etc. complete :
19 9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating
not less than grade AC 10 as per IS : 1868) transparent or dyed to required
colour or shade with necessary screws etc. complete :
Providing and fixing aluminium hanging floor door stopper ISI marked
anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent
or dyed to required colour and shade with necessary screws etc.complete.
9.101.2 Twin rubber stopper Each 30.00 72.35 0.00 2170.50 0.00
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
21 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a Rmt 75.00 492.70 0.00 36952.50 0.00
wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet,
mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm
M.S. square tube, the vertical door frame profiles to be reinforced with 19x19
mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be
provided throughout the frame. The door frame to be fixed to the wall using
M.S. screws of 65/100 mm size, complete as per manufacturer’s specification
and direction of Engineering-Charge.
22 9.120 Providing and fixing factory made panel PVC door shutter consisting of frame
made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for
styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of
steel primers of approved make and manufacture. M.S. frame covered with 5
mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width
30 of which 50 mm
thick pre shall bePVC
laminated flat door
and 20 mm shall be tapered in 45 degree angle
WOOD WORKS TOTAL 1504908.40 0.00
23 10.16 Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete.
10.16.1 Hot finished welded type tubes kg 8000.00 194.40 0.00 1555200.00 0.00
24 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 1500.00 172.60 0.00 258900.00 0.00
25 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, KG 100.00 772.40 0.00 77240.00 0.00
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel
nuts and bolts complete, i/c fixing the railing with necessary accessories &
stainless steel dash fasteners , stainless steel bolts etc., of required size, on the
top of the floor or the side of waist slab with suitable arrangement as per
approval of Engineer-in-charge, ( for payment purpose only weight of stainless
steel members shall be considered excluding fixing accessories such as nuts,
bolts, fasteners etc.).
STEEL WORKS TOTAL 1891340.00 0.00
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
26 11.26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed
with grey cement slurry mixed with pigment to match the shade of the slab,
including rubbing and polishing complete with base of cement mortar 1 : 4 (1
cement : 4 coarse sand) :
27 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on SQM 250.00 2354.70 0.00 588675.00 0.00
12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and
jointed with grey cement slurry mixed with pigment to match the shade of the
slabs, including rubbing and polishing complete.
28 11.40 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or SQM 60.00 1439.40 0.00 86364.00 0.00
more (thickness to be specified by the manufacturer), of 1st quality conforming
to IS : 15622, of approved make, in all colours, shades, except White, Ivory,
Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4
Coarse sand), including pointing the joints with white cement and matching
pigments etc., complete.
29 11.41A Providing and laying vitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorption less than 0.08% and
conforming to IS : 15622, of approved make, in all colours and shades,laid on
20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting
the joints with white cement and matching pigments etc., complete.
11.41A.1 Double charge vitrified tile polished finish of size
30 11.47 Providing and laying Vitrified tiles in different sizes (thickness to be specified
by the manufacturer), with water absorption less than 0.08% and conforming to
IS: 15622, of approved brand & manufacturer, in all colours and shade, in
skirting, riser of steps, laid with cement based high polymer modified quick set
tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness,
including grouting of joints (Payment for grouting of joints to be made
31 11.48 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy
grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of
hardener and 0.20 kg of resin per kg), including filling / grouting and finishing
complete as per direction of Engineer-in-charge.
32 11.50 Deduct for not grouting the joints with white cement and matching pigment in sqm 110.00 13.30 0.00 1463.00 0.00
the items of fixing of vitrified tiles.
FLOORING WORKS TOTAL 3447754.00 0.00
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
33 NS Providing and fixing external sheeting of Corrugated GALVALUME Colour SQM 750.00 0.00 1073.80 0.00 805350.00
Coated (Paint-Super Durable Polyester, Top Side- Primer paint + polyester paint
coating 25 microns minimum, Back side Primer epoxy 10 microns minimum)
sheet -0.60 mm minimum thickness and minimum yield strength 550 MPa
coated with coating of AZ150 class @ 150 gms/sqm (The alloy- coated product
contains 55% aluminium, 43.5% zinc and 1.5% silicon by weight) with effective
cover width of 1000-1020 mm, 30 mm crest, 250-255 mm wide pans having
special male/female side laps with anti-siphoning features to avoid leakages,
including drilling holes to purlins/truss members as required, fixing to
purlins/truss members with necessary hex head screw, polymer coated J or L
hooks, bolts and nuts etc. of any size & type as per requirement etc. all complete
(nothing shall be extra paid to the contractor except wind ties) as per
manufacturers specifications, approved drawings and as directions of Engineer-
34 12.11 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. mtr 70.00 195.60 0.00 13692.00 0.00
35 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes
conforming to IS : 13592 Type A including jointing with seal ring conforming
to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.
36 12.42 Providing and fixing on wall face unplasticised - PVC moulded
fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to
IS : 13592 Type A including jointing with seal ring conforming to IS :5382
leaving 10 mm gap for thermal expansion.
12.42.6 Shoe (Plain)
37 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to
unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood
plugs, screwed with M.S. screws of required length including cutting brick work
and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the
wall etc. complete.
ROOFING WORKS TOTAL 62000.40 805350.00
FINISHING WORKS
38 13.1 12 mm cement plaster of mix:
13.8 15 mm cement plaster on rough side of single or half brick wall finished with a
floating coat of neat cement of mix :
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
39 13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 SQM 150.00 537.45 0.00 80617.50 0.00
(1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1
cement : 3 coarse sand) finished rough with sponge.
40 13.16 6 mm cement plaster of mix:
41 13.62 Painting with synthetic enamel paint of approved brand and manufacture to give
13.62.1 Two or more coats on new work. SQM 850.00 226.25 0.00 192312.50 0.00
42 13.80 Providing and applying white cement based putty of average thickness 1 mm, of SQM 200.00 156.05 0.00 31210.00 0.00
approved brand and manufacturer, over the plastered wall surface to prepare the
surface even and smooth complete.
43 13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC
content less than 50 gms/litre, of approved manufacturer, of required shade and
colour complete, as per manufacturer's specification.
13.41.1 New work (two or more coats) over and including water thinnable priming coat SQM 2500.00 185.65 0.00 464125.00 0.00
with cement primer having VOC content less than 50 gms/litre
44 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including SQM 2980.00 160.60 0.00 478588.00 0.00
priming coat of exterior primer applied @ 0.90 litre/10 sqm)
45 13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required, to achieve
even shade and colour.
46 13.69 Polishing on wood work with ready mixed wax polish of approved brand and
47 13.85 Applying priming coats with primer of approved brand and manufacture, having
low VOC (Volatile Organic Compound ) content.
13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) SQM 200.00 70.35 0.00 14070.00 0.00
having VOC content less than 50 grams/ litre
FINISHING WORKS TOTAL 3312223.50 0.00
REPAIRS TO BUILDING
48 14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters
and under, including cutting the patch in proper shape, raking out joints and
preparing and plastering the surface of the walls complete, including disposal
of rubbish to the dumping ground, all complete as per direction of Engineer-in-
14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) Sqm 150.00 560.50 0.00 84075.00 0.00
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
REPAIRS TO BUILDING TOTAL 84075.00 0.00
DISMANTLING AND DEMOLISHING
49 15.2 Demolishing cement concrete manually/ by mechanical means including
disposal of material within 50 metres lead as per direction of Engineer - in -
15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 40.00 1503.60 0.00 60144.00 0.00
50 15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of Cum 150.00 3551.25 0.00 532687.50 0.00
steel bars and disposal of unserviceable material within 50 metres lead as per
direction of Engineer - in- charge.
51 15.7 Demolishing brick work manually/ by mechanical means including stacking of
serviceable material and disposal of unserviceable material within 50 metres
lead as per direction of Engineer-in-charge.
52 15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter
including chowkhats, architrave, holdfasts etc. complete and stacking within 50
15.12.1 Of area 3 sq. metres and below Each 85.00 367.20 0.00 31212.00 0.00
15.12.2 Of area beyond 3 sq. metres Each 65.00 502.75 0.00 32678.75 0.00
53 15.13 Taking out doors, windows and clerestory window shutters (steel or wood)
including stacking within 50 metres lead :
15.13.1 Of area 3 sq. metres and below Each 85.00 143.50 0.00 12197.50 0.00
15.13.2 Of area beyond 3 sq. metres Each 65.00 188.90 0.00 12278.50 0.00
54 15.56 Dismantling old plaster or skirting raking out joints and cleaning the SQMT 7500.00 54.65 0.00 409875.00 0.00
surface for plaster including disposal of rubbish to the dumping ground within
50 metres lead.
55 15.23 Dismantling tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm sqm 250.00 73.40 0.00 18350.00 0.00
Disposal of building rubbish / malba / similar unserviceable, dismantled or
waste materials by mechanical means, including loading, transporting,
unloading to approved municipal dumping ground or as approved by Engineer-
in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
DISMANTLING AND DEMOLISHING TOTAL 1213975.25 0.00
57 16.3 Supplying and stacking at site.
ROAD WORKS TOTAL 581625.00 0.00
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
SANITARY INSTALLATIONS
58 17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with
100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing
cistern, including flush pipe, with manually controlled device (handle lever)
conforming to IS:7231, with all fittings & fixtures complete including cutting
and making good the walls and floors wherever required.
17.1.1 White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral EACH 5.00 6767.40 0.00 33837.00 0.00
type foot rests.
Providing and fixing white vitreous china pedestal type water closet (European
type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,
including flush pipe, with manually controlled device (handle lever),
conforming to IS : 7231, with all fittings and fixtures complete, including
cutting and making good the walls and floors wherever required :
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid EACH 5.00 6515.55 0.00 32577.75 0.00
60 17.7 Providing and fixing wash basin with C.I.brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings
and brackets, cutting and making good the walls where required :
17.7.4 White vitreous china flat back wash basin size 550 x 400 mm with single 15 mm EACH 6.00 1879.20 0.00 11275.20 0.00
C.P. brass pillar taps.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. brackets and stainless steel plug 40 mm, including
painting of fittings and brackets, cutting and making good the walls
wherever required :
17.10.2 Kitchen sink without drain board
62 17.24 Providing and fixing white vitreous china squatting plate urinal with integral rim EACH 4.00 4048.65 0.00 16194.60 0.00
longitudinal flush pipe.
63 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of each 6.00 1607.95 0.00 9647.70 0.00
approved quality) complete with 6 mm thick hard board ground fixed to wooden
cleats with C.P. brass screws and washers complete.
64 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings arrangement of
approved quality and colour.
17.73.1 450 mm long towel rail with total length of 495 mm, 78 mm EACH 6.00 673.40 0.00 4040.40 0.00
wide and effective height of 88 mm, weighing not less than
65 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off, EACH 6.00 1083.50 0.00 6501.00 0.00
supported on anodised aluminium angle frame with C.P. brass brackets and
guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
66 17.60 Providing and fixing trap of self cleansing design with screwed down or hinged
grating with or without vent arm complete, including cost of cutting and making
good the walls and floors :
17.60.1 100 mm inlet and 100 mm outlet
SANITARY INSTALLATIONS TOTAL 137912.45 0.00
67 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot and cold water supply, including all CPVC plain and
brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing.
This includes jionting of pipes and fittings with one step CPVC solvent cement
and the cost of cutting chases and making good the same including testing of
joints complete as per the direction of engineer incharge
concealed work, including cutting chases and making good the wall etc.
18.8.1 15 mm nominal outer dia pipes RMT 70.00 497.80 0.00 34846.00 0.00
18.8.3 25 mm nominal outer dia pipes RMT 55.00 627.25 0.00 34498.75 0.00
18.8.4 40 mm nominal outer dia pipes RMT 75.00 739.30 0.00 55447.50 0.00
68 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain & brass
threaded fittings. This includes jointing of pipes & fittings with one step CPVC
solvent cement, trenching, refilling and testing of joints complete as per
direction of Engineer in Charge.
18.9.3 25 mm nominal outer dia Pipes RMT 25.00 355.40 0.00 8885.00 0.00
18.9.6 50 mm nominal outer dia Pipes RMT 50.00 794.25 0.00 39712.50 0.00
69 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed ends):
70 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage per litre 5000.00 11.00 0.00 55000.00 0.00
tank, IS : 12701 marked, with cover and suitable locking arrangement and
making necessary holes for inlet, outlet and overflow pipes but without fittings
and the base support for tank.
71 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to
72 18.51 Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
73 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points
of approved quality conforming to IS 8931 a) 15 mm nominal bore.
74 18.62 Providing and fixing PTMT Ball cock of approved quality, colour and make
complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
18.62.5 50 mm nominal bore, 242 mm long, weighing not less than 1240 gms EACH 1.00 1375.95 0.00 1375.95 0.00
WATER SUPPLY TOTAL 257217.95 0.00
75 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with
C.I. grating brick masonry chamber with water tight C.I. cover with frame of
300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and
frame to be not less than 2.70 kg as per standard design:
19.4.2 150 x 100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
76 19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse
sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1
cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside
plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand)
finished with floating coat of neat cement and making channels in cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm
nominal size) finished with a floating coat of neat cement complete as per
standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover and frame to be
not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 4.00 12770.55 0.00 51082.20 0.00
DRAINAGE WORK TOTAL 78424.20 0.00
77 21.1 Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS:
1285, fixing with dash fasteners of required dia and size, including necessary
filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM
rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including cleat
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel
screws, all complete as per architectural drawings and the directions of Engineer-
in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
21.1.1 For fixed portion
21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder KG 50.00 539.85 0.00 26992.50 0.00
coating 50 micron)
21.1.2 For shutters of doors, windows & ventilators including providing and fixing
hinges/ pivots and making provision for fixing of fittings wherever required
including the cost of EPDM rubber / neoprene gasket required (Fittings shall be
paid for separately)
21.1.2.3 Polyester powder coated aluminium (minimum thickness KG 100.00 643.45 0.00 64345.00 0.00
of polyester powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete
as per the architectural drawings and the directions of engineer-in- charge .
(Cost of aluminium snap beading shall be paid in basic item):
21.3.2 With float glass panes of 5 mm thickness Sq.m 10.00 1505.25 0.00 15052.50 0.00
ALUMINIUM WORK TOTAL 106390.00 0.00
NEW TECHNOLOGIES AND MATERIALS
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
Providing and fixing false ceiling at all heights with integral densified
calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size
595x595 mm of approved texture, design and patterns as per CPWD
Specification 2019, to be laid in true horizontal level suspended on inter-
locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick
(galvanized @ 120 grams per sqm including both sides)comprising of main-
T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of
length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length
600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling
using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50
mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm
length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and
Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange
to pierce into 12x50 mm or evento the styles & rails with 7 mm (5 mm+2 mm)
thick x 15 mm wide PVC sheet beading on inner side, and joined together with
solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is
to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive
etc. complete as per direction of Engineer-in-charge, manufacturer’s
specification & drawing. to
With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles
NEW TECHNOLOGIES AND MATERIALS WORK TOTAL 370776.00 0.00
Repair, rehabilitation and retrofitting of distressed reinforced concrete
REPAIRS & RETROFITTING:
80 NS Anticorrosive Treatment to Steel: Providing and applying single coat of zinc SqM 650.00 340.00 0.00 221000.00
rich anti corrosive coating such as nitozinc primer in 40 micron thickness to the
exposed reinforcing bars after application of alkaline rust remover on main and
lateral links all complete as per the manufacturing specifications and as per the
direction the Engineer-in-charge.
Anti-corrosive epoxy zinc rich coating: Providing & applying inhibition
coats/system to exposed reinforcement bars after drying & also new bars after
cleaning & removing scales and rust completely as specified. Nitozinc Primer-
Two component epoxy zinc rich primer supplied in 1 and 5 Litre pack, two
component systems based on metallic zinc and epoxy resin which on mixing
gives a grey coloured liquid. An Anti corrosive coat contents Active 'Zinc-rich'
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
81 NS Micro concrete : Polymer Modified Micro- Concrete: Providing and Ton 20.00 26000.00 0.00 520000.00
laying of polymer modified micro- concrete like Emaco S46 T of
BASF/Renderoc RG (S) of Fosroc/ReCon MC 40 of Conmix or
equivalent material blended with washed, saturated surface-dry (SSD), graded,
low absorption, high density aggregates of size 8 mm & below up to 50%
82 NS (as and whenInhibitor:
Corrosion required) byProviding
micro-concrete and water
applying bipolar at 4 lit. per
inhibition treatment to the overall concrete surface repair area including area
where reinforcement is exposed. The product shall be as per specifications ,Item
rate is inclusive of the materials, all labour, supervision, tools and tackles and
transportation etc., complete as per specification and as direction of engineer in
83 NS Single Part PMM Treatment: Providing and laying of polymer
modified single component, alkaline resistant fibre reinforced, duel
shrinkage-compensated, thixotropic, cementations patch repair mortar
Emaco S48CT of BASF/ Renderoc SP 40 of Fosroc or equivalent material
that achieves compressive strength of 35 MPa at 7 days and finishing
Built carefully compacting
up thickness themm
of up to 40 same around the rebars and finishing
Polymer modified Mortar-Patch repair (Up to Grade M45): Providing and
laying Renderoc SP 40- shrinkage controlled polymer modified single
component, alkaline resistant fibre reinforced, thixotropic, cementitious patch
repair mortar supplied in 25 kg moisture resistant bag when mixed with clean
water at w:p ratio 0.18, achieves compressive strength (BS 1881 Pt.116) -> 20
Mpa at 1 day & > 45 Mpa at 28 days, Tensile Strength(BS 6319 Pt.7) > 2.5 Mpa
Total Sub Head:- Repair, rehabilitation and retrofitting of distressed 0.00 1093500.00
reinforced concrete structures
Solar Photovoltaic Power Plant
84 1 Supply, Installation, Testing and Commissioning of on grid Solar Photovoltaic
Power Plant conforming to MNRE specifications as amended, consisting of
Mono/Poly Crystalline silicon solar cells, net metering facility, necessary
protections, earthing, mounted on Aluminium/GI structure of suitable strength
with following components complete as required
a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in
India, conforming to IS 14286/ IEC61215,IS/ IEC61730-Part-1,IS/ IEC61730-
Part-2. Solar Photovoltaic Module conversion efficiency shall not be less
than16.5%.PV modules used in solar power plants/systems must be warranted
for their output peak watt capacity, which should not be less than 90% attheend
of 10 years and 80 % attheend of 25 years
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
b) Power Conditioning Unit (PCU)of350-800 V DC Input voltage range and
400 V AC, three phase, 4wire, 50Hz+/-2.5 Hz, output voltage suitable to
generate AC Power with efficiency not less than 97%, total harmonic distortion
less than 3% and suitable for ambient temperature from 0to50 degree C. The
PCU shall adjust the voltage and frequency level to suit the Grid Voltage
.c) Data Monitoring System complete with accessories.
d) Fixing of Array junction box & Main junction box with IP65 protection and
termination arrangement for incoming and outgoing cable along with glands,
lugs and other accessories etc. as required
e) Lightning and surge voltage protection
f) Connections & Interconnections by supplying & fixing required size XLPE
insulated copper conductor 1.1Kv grade armoured power and control cables
between solar modules, main power cable to grid supply PCU unit along with
supplying & fixing of necessary channel/conduit lugs and other accessories etc.
g) system Earthing as required kw 10.00 61060.00 0.00 610600.00 0.00
Solar Photovoltaic Power Plant Total 610600.00 0.00
ELECTRICAL WORK
[Q] SUB HEAD: WIRING : WIRING IN PVC CONDUIT
85 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, with modular switch, modular plate,
suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
86 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper Point 30.00 1562.00 0.00 46860.00 0.00
conductor single core cable in surface / recessed medium class PVC conduit, 2
way modular switch, modular plate, suitable GI box and earthing the point with
1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as
87 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper Metre 250.00 334.00 0.00 83500.00 0.00
conductor single core cable in surface/ recessed medium class PVC conduit
alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core
cable for loop earthing as required.
88 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes
of FRLS PVC insulated copper conductor, single core cable in surface/ recessed
medium class PVC conduit as required
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
89 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper 0.00 0.00
conductor .single core cable in the existing surface / recessed steel / PVC
conduit as required.
90 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper Metre 180.00 47.00 0.00 8460.00 0.00
conductor PE insulated, shielded with fine tinned copper braid and protected
with PVC sheath in the existing surface/ recessed steel/ PVC conduit as
91 1.21 Supplying and fixing of following sizes of medium class PVC conduit along
with accessories in surface/recess including cutting the wall and making good
the same in case of recessed conduit as required
92 1.24 Supplying and fixing following modular switch/socket on the existing Modular
plate & switch box including connection but excluding modular plate etc. as
93 1.25 Supplying and fixing two module stepped type electronic fan regulator on the Each 50.00 369.00 0.00 18450.00 0.00
existing modular plate switch box including connections but excluding modular
plate etc. as required.
94 1.26 Supplying and fixing two module blanking plate on the existing modular plate & Each 50.00 40.00 0.00 2000.00 0.00
switch box excluding modular plate etc. as required.
95 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front Each 50.00 477.00 0.00 23850.00 0.00
on surface or in recess, including providing and fixing 3 pin 5/6 A modular
socket outlet and 5/6 A modular switch, connections etc. as required.
96 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front Each 50.00 586.00 0.00 29300.00 0.00
on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A
modular socket outlet and 15/16 A modular switch, connections etc. as required.
97 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ Each 50.00 87.00 0.00 4350.00 0.00
wooden block including connections etc. as required.
98 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes Each 250.00 119.00 0.00 29750.00 0.00
and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with
all accessories including connections etc. as required.
99 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete Each 1.00 99.00 0.00 99.00 0.00
100 1.44 Installation, testing and commissioning of ceiling fan, including wiring the Each 50.00 213.00 0.00 10650.00 0.00
down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable etc. as required.
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
101 1.50 Installation of exhaust fan in the existing opening, including making good the
damage, connection, testing, commissioning etc. as required.
102 1.58 Supplying and fixing PVC batten/ angle holder including connection etc. as Each 50.00 110.00 0.00 5500.00 0.00
103 2.30 Supplying and fixing following way, single pole and neutral, sheet steel, MCB
distribution board, 240 V, on surface/ recess, complete with tinned copper bus
bar, neutral bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without MCB/RCCB/Isolator)
104 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in the
existing MCB DB complete with connections, testing and commissioning etc. as
105 2.13 Supplying and fixing following rating, four pole, 415 V, isolator in the existing
MCB DB complete with connections, testing and commissioning etc. as
106 Non-Sch. Supplying of pre-wired fittings complete with all accessories like choke, tube,
capacitor and starter as required.Tube light with fixtures and fittings complete
a) Supply Batten for LED tube light batten light fixture complete with 1x20W Each 50.00 0.00 271.40 0.00 13570.00
LED .nxt LED 20 Retro Bar Professional 111338 WH 6000K approved
b) Supplying of 5 Watt/7 Watt /9 Watt LED Lamp as per required. Each 50.00 0.00 413.00 0.00 20650.00
107 Non-Sch. Supplying of ceiling fan 1200 mm. sweep 3 Nos. blade (white colour) including Each 50.00 0.00 2950.00 0.00 147500.00
all accessories, double ball bearing with 400 w electronic type fan regulator,
suitable for operation on 230 v single phase, 50 Hz AC supply etc. complete of
approved make as per site requirement.Crompton, Phillips, Orient etc. make
108 Non-Sch. Supply and fixing of DING -DONG BELL as per site required. Each 1.00 0.00 295.00 0.00 295.00
109 Non-Sch. Supply and fixing of 63 amp.-LT Change over switch. Set 10.00 0.00 2400.00 0.00 24000.00
110 5.4 Earthling with G.I earth plate 600mm x 600mm x 6 mm thick including Set 20.00 7472.00 0.00 149440.00 0.00
accessories, and providing masonary enclosure with cover plate having locking
arrangement and watering pipe of 2.7 meter long etc.with charcoal/coke and salt
111 5.7 Supplying and laying 6 SWG G.I wire at 0.50 meter below ground level for Meter 250.00 51.00 0.00 12750.00 0.00
conductor earth electrode ,including connection /termination with G.I thimble
etc. as required.
Digitally signed by SHUBHAM
DSR 2023 RATE (Rs.) AMOUNT (Rs.)
Sr. No. Description of item Unit QTY.
ITEM NO. DSR NDSR DSR NDSR
112 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for Metre 50.00 244.00 0.00 12200.00 0.00
connections etc. as required.
ELECTRICAL WORK TOTAL 897164.00 206015.00
113 NS Providing & supplying classroom bench for student ( wooden desk & ms pipe ) No. 200.00 0.00 4040.00 0.00 808000.00
114 NS CCTV camera with all fitting & fixing No. 25.00 0.00 7575.00 0.00 189375.00
115 NS providing & supplying UPS battery for computer & smart room TV No. 1.00 0.00 33330.00 0.00 33330.00
NS ITEMS TOTAL 0.00 1030705.00
Digitally signed by SHUBHAM
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NITPGCIL79.pdf
Tender Document
GCC2022PGCIL79.pdf
Tender Document
BOQPGCIL79.pdf
Tender Document
SCCPGCIL79.pdf
Tender Document
ApprovedMakePGCIL79.pdf
Tender Document
corrigendum-4254-Corrigendum01.pdf
pdf • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .