LRRP-LRRP 2024-25, Manjeri LAC , SL No 3620 -,LRRP 2024-25, Manjeri LAC , SL No 3620, Palliyattu Ambalam Road ,Keezhattur GP

Amount

Road improvements

OD475922/2024-2025:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

OD475923/2024-2025: Filling with Quarry Muck Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

4.9:Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead

5.1.1a:Prime Coat :- Low porosity <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

5.2.3a:Tack Coat <br>Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

5.11.1.A.2a:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means :- Type A <br> (II) Bitumen (S-65)

OD475936/2024-2025:Providing and fixing of Direction and Place Identification retro reflectorised signs with 7 years warranty manufactures as per IRC : 67 made of type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick /aluminium composite material sheeting 4mm thick with area exceeding not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40*40*6mm and supported on GI pipe pole 50mm NB-2nos confirming to IS 1239firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete min size 40 cm x 40 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and Technical Specification Clause 801 including lettering symbols etc (Derived from Mord spec 10.3.A. 2

MOHAMED BASHEER M.T. (BID ID -2153974)

ABDUL NASER V (BID ID -2154227)

P. SHIHABUDHEEN (BID ID -2154640)

Bidder Name

MOHAMED BASHEER M.T.

P. SHIHABUDHEEN

NOUNAISE.P

ABDUL NASER V