Renovation of Maharishi Valmiki chowk near JMIT Radaur in MC Radaur.

Providing and fixing of High Quality IP65 NEON FLEX Silicon Profile size 30x20mm fitted with IP20 LED Strip light 10w per meter supplied with IP65 Power supply as per 5mtr roles. complete in all respect as per entire satisfaction of engineer incharge including 5 year warranty.

Providing and fixing of stainless steel letters (Valmiki chowk ) per the design and complete in all respet as per the direction of engineer in charge .

Providing and Fixing of Decorative pole of 4mtr high made of galvanised Mild steel pipes fitted with cast aluminium embellishments duly polyurethane paint coated with cast aluminium base cover. Pole Bottom Dia- 139.7x3.6mm (1 mtr), Top Dia -_ 76.1x3.2mm (2.5 mtr) Base Plate Size is 250x250x12mm Foundation Bolt 16x600x4 Nos. with Single Arm Bracket MF-82A height will be 1.5 Mtr. Long with Suitable pipes and Bracket will be completed with Aluminium Castings as per approved design and LED decorative drop down light 50w made of aluminium housing fitted with PMMA diffuser, Light Dimensions is 500x370 (With-Philips/Fulhame/HR Driver and10KVA SPD)complete in all respect as per the direction of the officer-in-charge.

Providing and fixing FRP (Fibre Reinforced Plastic) sculpture set for Valmiki Chowk, consisting of one open lotus of size 13’-6”, one FRP book of size 10’-6”, and one sculpted hand holding a feather pen writing on the book, fabricated using high-quality weather-resistant FRP with minimum 5–6 mm thickness, complete in all respects as per approved design and the direction of Engineer-in-Charge including 5 yr waranty for Manufacturing Defect

LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy =120 and (135 lm/Watt). Supplying, Installation, Testing and Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency )85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency )85%,THD ( 10% as per IEC 61000-3-2, P. F.=0.95, IP-66,IK-10, CRI )70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) (5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy = 120 and (135 lm/Watt output . LM79 and LM80

Recovery of Old Stainless Steel from Existing Chowks