Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.3 LAccepted-AOC | ₹5.3 L | L1 | Accepted-AOC L1 bidder |
| 2 | Rejected-Technical | - | - | Rejected-Technical Technically disqualified |
| 3 | Rejected-Technical 12 VALAMBURI AMMAN KOIL STREET TIRUNELVELI 627 006 | TIRUNELVELI | TIRUNELVELI | TAMIL NADU | 627006 | - | - | Rejected-Technical Technically disqualified |
| Sl No | Description | Qty | Unit | EXCEL ENGINEERS L1 |
|---|---|---|---|---|
| 1.00Outdoor Gym Equipment- 18% GST | ||||
| 1.01 | od242219/2024_2025 : Chest Press (Double) - Supply and Installation of Double Chest Press having the following specifications: Dimensions: (L X W X H) 1955 x 710 x 1900 mm. Main center pipe - Ø 114 mm OD “B” class GI pipe. Foundation plate –M.S. round plate of Ø 250mm & 8 mm thick. Foundations cover cap- dome shape of PP / NYLON / HDPE material. Remaining frame - made up of Ø 48 mm OD “B” Class G.I. pipe. Handle - Made up of Ø48mm OD “B” Class G.I. pipe. Link - made up of Ø 48 mm OD “B” Class G.I. pipe. Seat & back rest – 380 X 275 X 60 mm thick high-density polyethylene (HDPE) blow molded with M10 in-sert wall thickness 3 to 4 mm. Bearing bush Closing cap’s– PP / NYLON / HDPE material. Handle must be connected with frame by 8 MM laser cutting MS profile. Top Closing cap – dome shape made by PP /NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brands. Pin – Made up of Ø 25 mm M.S. bright bar pin. Bearing bushes - Ø 60 mm OD seamless pipe. Grips - High quality rubber Ø 46 mm OD. Circlips–A 24 circlips are used for assembly. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing | 1 | no | 32,350 ₹32,350 Lowest |
| 1.02 | od242220/2024_2025 : Air Walker - Supply and Installation of Air Walker having the following specifications: Dimensions: (L X W X H) 1190 x380 x 1244 mm. Main Frame- Ø 88 mm OD “B” class GI pipe dually bending design. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Paddle– Ø 42 mm OD round GI pipe. Handle – Ø 33 mm OD “B” class GI pipe. Footrest - cast iron 124 x 296 x 5 mm thick and M.S. plate of 2 mm thick use to support it. Top Closing cap – dome shape made by PP / NYLON / HDPE material. Closing cap’s - PP / NYLON / HDPE material. Bracket - 8 mm thick laser profile is use to support paddle frame. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing- use is 6005 permanent lubricated reputed brands. Pin’s – Ø 25mm M.S. bright bar pin. Circlips– A 24 circlips are used for assembly. Bearing bushes -Ø 60 mm OD seamless pipe. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. | 1 | no | 23,568 ₹23,568 Lowest |
| 1.03 | od242229/2024_2025 : Cross Trainer (Double) - Supply and Installation of Double Cross Trainer having the following specifications: Dimensions: (L X W X H) 2280 x 550 x 1650 mm. Main frame- Made of Ø 88 mm OD “B” class GI pipe dually bending design. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Paddle vertical support - Ø 42 mm OD “B” Class GI pipe. Handle - Ø 33 mm OD “B” Class GI pipe dually bending design. Leg movement frame – 50 mm x 50 mm x 2 mm thick square pipe. Footrest - cast iron 124 x 296 x 5 mm thick and M.S. plate of 2 mm thick use for to support it. Top Closing cap – dome shape made by PP / NYLON / HDPE material. Closing cap’s– PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD B class G.I. pipe. and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Grips - High quality rubber. Bearing- Use is 6005 permanent lubricated reputed brand. Bearing bushes - Ø 60mm OD seamless pipe. Pin –Made of Ø 25mm M.S. bright bar. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 80-100 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. | 1 | no | 36,114 ₹36,114 Lowest |
| 1.04 | od242244/2024_2025 : Shoulder Builder (Double) - Supply and Installation of Double Shoulder Builder having the following specifications: Dimensions: (L X W X H) 890 x 558 x 1500 mm. Main frame - Made from Ø 114 mm OD “B” Class G.I. pipe. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Foundation cover cap- dome shape of PP / NYLON / HDPE material. Shoulder ring pipe - Ø 33 mm OD “B” Class G.I Pipe. Shoulder ring pipe support – Ø 25 mm OD “B” Class G.I Pipe. Nylon knob with Bearing – Is fixed on shoulder ring pipe for rotating purpose (2 set to be fixed in a position for kids and adults). Top Closing cap’s- PP / NYLON / HDPE material. Closing cap – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brands. Pin – Ø 25 mm M.S. bright bar pin. Foundation plate – M.S. roundplate of Ø 250 mm & 8 mm thick.<br>Bearing bushes - Ø 60 mm OD seamless pipe. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. | 1 | no | 39,878 ₹39,878 Lowest |
| 1.05 | od242247/2024_2025 : Triple Twister - Supply and Installation of Triple Twister (Standing position - 2 and Seating position - 1)<br>having the following specifications: Dimensions: (L X W X H) 1500 x 1500 x 1420 mm. Main frame – Ø<br>114 mm OD “B” class GI pipe. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Seat<br>plate support – Ø 60 mm OD “B” Class G.I Pipe. Seating ring - Ø 33 mm OD “B” Class G.I Pipe made by<br>rolling. Seating ring support - Ø 33 mm OD “B” Class G.I Pipe. Remaining frame – Is made by 100 x 50 x<br>2.5 mm rectangular pipe. Standing plate- Ø 300 mm OD X 10 mm thick M.S. plate. Seating plate- Ø 300<br>mm OD X 10 mm thick M.S. plate. Seating seat position and other two standing position plates are fixed ;120 degrees each from other. Handle – Ø 33 mm “B” Class G.I. Pipe made by rolling. Top Closing cap – Dome shape made by PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm<br>OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square<br>tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is<br>embedded in C.C. stock below ground level. Bearing - Used is 6005 permanent lubricated reputed brand. ;Bearing bushes - Ø 60 mm OD seamless pipe. Pin – Made up of Ø 25mm M.S. bright bar. Circlips– A 24 circlips are used for assembly. Coating - best quality of powder coating 80 -120 micron. Safety ;Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing. | 1 | no | 27,332 ₹27,332 Lowest |
| 1.06 | od242249/2024_2025 : Rower - Supply and Installation of Rower having the following specifications: Dimensions: (L X W X H) =1472 x 915 x 1040 mm. Upper and bottom pipes - Ø 88 mm OD “B” Class GI pipe. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Handle - Ø 33 mm OD “B” Class G.I pipe. Angle between handle and horizontal surface is 75 - 80 degree. Linkages – Ø 48 mm OD “B” Class G.I. pipe. Seat & back rest – 380 x 275 x 60mm thick high-density polyethylene (HDPE) blow molded with M10 in-sert wall thickness 3 to 4 mm. Foot resting pipe - Ø 60 mm OD “B” Class G.I. pipe. End Closing cap – dome shape made by PP / NYLON / HDPE material. Closing caps – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø250 mm & 8mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Pin – Ø 25 mm M.S. bright 5 bar pin. Circlips– A 24 circlips are used for assembly. Bearing bushes - Ø 60 mm OD seamless pipe /Bar. Bearing- use is 6005 permanent lubricated reputed brands. Grips – high quality rubber 46 mm OD. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start &<br>finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing | 1 | no | 24,823 ₹24,823 Lowest |
| 2.00Kids Play Equipment & Sports Equipment- 18% GST | ||||
| 2.01 | od242254/2024_2025 : Merry go 6 seat fixing:Supply and fixing Merry go 6 seat fixing Provided with 40mm Main shaft MS rad single leg with bearing. supporting membe rs of GI 25 &amp; 20mm GI medium class. Seat size of minimum size 25cm x25 cm made up of good quality FRP fiber plan area is 0.6m^2,height 0.35 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour &amp;<br>material charges etc. complete<br> | 1 | each | 32,730 ₹32,730 Lowest |
| 2.02 | od242257/2024_2025 : SEE-SAW 4 seated Large:Supply and fixing SEE-SAW 4 seated Large Provided with 65mm medium GI pipe of 2 leg with handle of medium GI 20mm. Seat of minimum size 25cm x25 cm made up of good quality FRP fiber plan area is 1.8x 1.8 metre,height 0.35 metre. Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour &amp;<br>material charges etc. complete | 1 | each | 13,786 ₹13,786 Lowest |
Tender Value
₹6.7 L
EMD Value
₹17,000
Closing Date
2 Jul 2025, 3:00 pmClosed
The Chief Engineer, Sports Kerala Foundation
Jimmy George Indoor Stadium, Vellayambalam, Thiruvananthapuram
Supply and installation of Outdoor Gym Equipment, Kids Play Equipment and Supply of Sports Equipment
2025_SKF_766716_2
62/SKF/CE/2025-26
Open Tender
Equipments
Item Rate
60 days
Kalluvathukkal, Kollam
Please refer tender document
11 documents required · 11 mandatory
₹1,652
₹17,000
24 Sept 2025
17 Jun 2025
4 Jul 2025
17 Jun 2025
2 Jul 2025
17 Jun 2025
Amount
Outdoor Gym Equipment- 18% GST
od242219/2024_2025 : Chest Press (Double) - Supply and Installation of Double Chest Press having the following specifications: Dimensions: (L X W X H) 1955 x 710 x 1900 mm. Main center pipe - Ø 114 mm OD “B” class GI pipe. Foundation plate –M.S. round plate of Ø 250mm & 8 mm thick. Foundations cover cap- dome shape of PP / NYLON / HDPE material. Remaining frame - made up of Ø 48 mm OD “B” Class G.I. pipe. Handle - Made up of Ø48mm OD “B” Class G.I. pipe. Link - made up of Ø 48 mm OD “B” Class G.I. pipe. Seat & back rest – 380 X 275 X 60 mm thick high-density polyethylene (HDPE) blow molded with M10 in-sert wall thickness 3 to 4 mm. Bearing bush Closing cap’s– PP / NYLON / HDPE material. Handle must be connected with frame by 8 MM laser cutting MS profile. Top Closing cap – dome shape made by PP /NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brands. Pin – Made up of Ø 25 mm M.S. bright bar pin. Bearing bushes - Ø 60 mm OD seamless pipe. Grips - High quality rubber Ø 46 mm OD. Circlips–A 24 circlips are used for assembly. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing
od242220/2024_2025 : Air Walker - Supply and Installation of Air Walker having the following specifications: Dimensions: (L X W X H) 1190 x380 x 1244 mm. Main Frame- Ø 88 mm OD “B” class GI pipe dually bending design. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Paddle– Ø 42 mm OD round GI pipe. Handle – Ø 33 mm OD “B” class GI pipe. Footrest - cast iron 124 x 296 x 5 mm thick and M.S. plate of 2 mm thick use to support it. Top Closing cap – dome shape made by PP / NYLON / HDPE material. Closing cap’s - PP / NYLON / HDPE material. Bracket - 8 mm thick laser profile is use to support paddle frame. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing- use is 6005 permanent lubricated reputed brands. Pin’s – Ø 25mm M.S. bright bar pin. Circlips– A 24 circlips are used for assembly. Bearing bushes -Ø 60 mm OD seamless pipe. Coating - best quality of powder coating 80-120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing.
od242229/2024_2025 : Cross Trainer (Double) - Supply and Installation of Double Cross Trainer having the following specifications: Dimensions: (L X W X H) 2280 x 550 x 1650 mm. Main frame- Made of Ø 88 mm OD “B” class GI pipe dually bending design. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Paddle vertical support - Ø 42 mm OD “B” Class GI pipe. Handle - Ø 33 mm OD “B” Class GI pipe dually bending design. Leg movement frame – 50 mm x 50 mm x 2 mm thick square pipe. Footrest - cast iron 124 x 296 x 5 mm thick and M.S. plate of 2 mm thick use for to support it. Top Closing cap – dome shape made by PP / NYLON / HDPE material. Closing cap’s– PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD B class G.I. pipe. and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Grips - High quality rubber. Bearing- Use is 6005 permanent lubricated reputed brand. Bearing bushes - Ø 60mm OD seamless pipe. Pin –Made of Ø 25mm M.S. bright bar. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 80-100 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing.
od242244/2024_2025 : Shoulder Builder (Double) - Supply and Installation of Double Shoulder Builder having the following specifications: Dimensions: (L X W X H) 890 x 558 x 1500 mm. Main frame - Made from Ø 114 mm OD “B” Class G.I. pipe. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Foundation cover cap- dome shape of PP / NYLON / HDPE material. Shoulder ring pipe - Ø 33 mm OD “B” Class G.I Pipe. Shoulder ring pipe support – Ø 25 mm OD “B” Class G.I Pipe. Nylon knob with Bearing – Is fixed on shoulder ring pipe for rotating purpose (2 set to be fixed in a position for kids and adults). Top Closing cap’s- PP / NYLON / HDPE material. Closing cap – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Bearing - Use is 6005 permanent lubricated reputed brands. Pin – Ø 25 mm M.S. bright bar pin. Foundation plate – M.S. roundplate of Ø 250 mm & 8 mm thick.<br>Bearing bushes - Ø 60 mm OD seamless pipe. Circlips – A 24 circlips are used for assembly. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing.
od242247/2024_2025 : Triple Twister - Supply and Installation of Triple Twister (Standing position - 2 and Seating position - 1)<br>having the following specifications: Dimensions: (L X W X H) 1500 x 1500 x 1420 mm. Main frame – Ø<br>114 mm OD “B” class GI pipe. Foundation plate – M.S. round plate of Ø 250 mm & 8 mm thick. Seat<br>plate support – Ø 60 mm OD “B” Class G.I Pipe. Seating ring - Ø 33 mm OD “B” Class G.I Pipe made by<br>rolling. Seating ring support - Ø 33 mm OD “B” Class G.I Pipe. Remaining frame – Is made by 100 x 50 x<br>2.5 mm rectangular pipe. Standing plate- Ø 300 mm OD X 10 mm thick M.S. plate. Seating plate- Ø 300<br>mm OD X 10 mm thick M.S. plate. Seating seat position and other two standing position plates are fixed ;120 degrees each from other. Handle – Ø 33 mm “B” Class G.I. Pipe made by rolling. Top Closing cap – Dome shape made by PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm<br>OD M.S pipe and top support of M.S. round plate of Ø 250 mm & 8 mm thickness is welded top. Square<br>tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is<br>embedded in C.C. stock below ground level. Bearing - Used is 6005 permanent lubricated reputed brand. ;Bearing bushes - Ø 60 mm OD seamless pipe. Pin – Made up of Ø 25mm M.S. bright bar. Circlips– A 24 circlips are used for assembly. Coating - best quality of powder coating 80 -120 micron. Safety ;Instructions and Exercise chart - start & finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing.
od242249/2024_2025 : Rower - Supply and Installation of Rower having the following specifications: Dimensions: (L X W X H) =1472 x 915 x 1040 mm. Upper and bottom pipes - Ø 88 mm OD “B” Class GI pipe. Foundation plate –M.S. round plate of Ø 250 mm & 8 mm thick. Handle - Ø 33 mm OD “B” Class G.I pipe. Angle between handle and horizontal surface is 75 - 80 degree. Linkages – Ø 48 mm OD “B” Class G.I. pipe. Seat & back rest – 380 x 275 x 60mm thick high-density polyethylene (HDPE) blow molded with M10 in-sert wall thickness 3 to 4 mm. Foot resting pipe - Ø 60 mm OD “B” Class G.I. pipe. End Closing cap – dome shape made by PP / NYLON / HDPE material. Closing caps – PP / NYLON / HDPE material. Foundation stool: Made from main pipe Ø 88 mm OD M.S pipe and top support of M.S. round plate of Ø250 mm & 8mm thickness is welded at top. Square tube of 30 x 30 x 2 mm must be used to support center pipe. Height of stool is 3 ft. Foundation stool is embedded in C.C. stock below ground level. Pin – Ø 25 mm M.S. bright 5 bar pin. Circlips– A 24 circlips are used for assembly. Bearing bushes - Ø 60 mm OD seamless pipe /Bar. Bearing- use is 6005 permanent lubricated reputed brands. Grips – high quality rubber 46 mm OD. Coating - best quality of powder coating 80 -120 micron. Safety Instructions and Exercise chart - start &<br>finish position stick on product. All joints must be welded as per IS standards and zinc primer paint should be applied at all the welding points prior to finishing
Kids Play Equipment & Sports Equipment- 18% GST
od242254/2024_2025 : Merry go 6 seat fixing:Supply and fixing Merry go 6 seat fixing Provided with 40mm Main shaft MS rad single leg with bearing. supporting membe rs of GI 25 &amp; 20mm GI medium class. Seat size of minimum size 25cm x25 cm made up of good quality FRP fiber plan area is 0.6m^2,height 0.35 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour &amp;<br>material charges etc. complete<br>
od242257/2024_2025 : SEE-SAW 4 seated Large:Supply and fixing SEE-SAW 4 seated Large Provided with 65mm medium GI pipe of 2 leg with handle of medium GI 20mm. Seat of minimum size 25cm x25 cm made up of good quality FRP fiber plan area is 1.8x 1.8 metre,height 0.35 metre. Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour &amp;<br>material charges etc. complete
od242260/2024_2025 : Single play station: Supply and fixing Single play station with double swing and slider 65 mm medium GI 4 leg , 50mm medium GI 2 leg , 25mm and 20mm GI medium supporting members good quality FRP single mini slide of 2.1m, good quality FRP umberella of size (1x1) meter size, good quality FRP platform of size (1x1) meter size, 25mm medium GI ladder,FRP Sheet good quality LLDP rock holder wall climber.50mm x25mm GI Frame,seat belt and 6mm chain with plastic coating.plan area is 4.5m x 4.5m,height 3 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour and material charges etc. complete
od242261/2024_2025 : 4 seater Circular swing:Supply and fixing 4 seater Circular swing 60mm medium class GI pipe of 4Nos of leg, supporting members of 25mm,20 mm medium calss GI pipe,good quality. FRP seat of minimum size 25x25cm plan area is 2.1 x 1.5 metre,height 2.1 metre<br>Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour &amp; material charges etc. complete
od242265/2024_2025 : Rocker Spring duck:Supply and fixing Rocker Spring duck Provided with 50mm medium class as main shaft GI, 10mm MS spring,6mm MS Plate with good quality. FRP Duck body. Plan area is 0.6 x 0.6 metre,height 0.75 metre Cost inclusive of loading, unloading, transportation, erection, fixing charges, labour &amp; material charges etc. complete<br>
od11251/2025_2026 : Air Pump- Supply of Air Pump having the following specifications: Single cylinder, weight approx. 1.8kg with pressure gauge, Brand: Raj cycle or similar make.
od11253/2025_2026 : Ball Bag : Supply of Ball bag of Brand: Ospo, 2 Side Mesh Panel made with 600x 600D Polyster Fabric. Suitable for 15 Size 5<br>Footballs Size: 39” x 19”
od242274/2024_2025 : Cones 9 Inch- Supply of 9'' cones made of plastic available in assorted colours Brand: Vinex, Nivia, Cosco or similar make.
od242276/2024_2025 : Premium quality First aid kit&lt;br&gt;Band-Aids, Bandages, Cotton, roll, move (spray<br>and&lt;br&gt;ointment), scissor, neceassry Medicines
od242303/2024_2025 : Cricket bat : Supply of Champion Kashmir willow bat made of Kashmir willow. Handle covered with high quality rubber grip and concave edges for stability and with full length cover.
Sports Equipment- 12% GST
od242281/2024_2025 : Supply of Football with the following specification Brand: Nivia Model: Shining Star or similar make<br>
od242284/2024_2025 : Supply and Installation of premium quality children Adjustable Basket ball post.Specifications as follows;Age Limit: 3 to 8 years old, Adjustable Basket Ball post, Material: Brand: OSPO or similar make, Size: Small, Material: HDPE, Prior approval shall be made from the concerned engineer in charge.
od242287/2024_2025 : Volleyball- Supply of Volleyball having the following specification: Super Volley, Genuine Leather pasted. VFI approved Brand: Cosco, Nivia, Sparten, Vats, Vixen or similar make
od11254/2025_2026 : Supply of Tennis Ball with specification Brand: Vicky, Weight: 85gm
Bidder Name
EXCEL ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .