503/HIDCO/AGMIII/NIT57/2223

Amount

MUSEUM EXHIBITS (STATIC & DYNAMIC MODELS)

Providing, fixing and installation of a small scale model of the building 'Solar Dome Museum' made of Fiber Glass, Solid Acrylic, Acrylic Sheet, Aluminium parts, Electronic components and lichen and fixed using adhesives and screws as required. Dome structure to have a diameter of 2100mm and height of 600mm approx. Exhibit will be placed on top of a round console.An infographic panel to be installed on the walls beside with information about the model. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM0-01 (SOLAR DOME MODEL) EXHIBIT

Providing and making of 750mm high round mounting base, made of 12mm thk flexible plywood structure with required metal sections as per detail. Top surface and surface of the body to be finished in 6mm thk. Solid Acrylic and Base to be completed including making of intermediate partitions, powerpoint & UPS provision and hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. ROUND CONSOLE- SOLAR DOME MODEL BASE (Size- 3000dia X 750) (Code :JO 04) JOINERY

Providing, fixing and installation of a real scale model of two 'Futuristic cars' made of Aluminium Alloy, Carbon fillers, Fiber Glass, Solid Acrylic, Acrylic Sheet, Electronic components, peel ply, resin and fixed using adhesives, bolts & screws as required. Future Car Model dimensions to be same as 'Lotus Evija Car' or a future car. Information about the car to be displayed on a curved digital screen behind the exhibit. Car model will be mounted on a round base which will rotate using adequate hardware and elecronic connections. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM0-02 (FUTURE CAR MODEL)EXHIBIT

Providing and making of 450mm high round mounting base (Base pedestal), made of 12mm thk flexible plywood structure with required metal sections as per detail. A rotating round base of 150mm height to be fixed on top of the base pedestal with adequate rotating hardware (as per weight reuirement of model). Top surfaces to be finished in 12mm thk. solid wood pasted by adhesive with polyurethane coating (high gloss). Surface to be finished in 6mm solid Acrylic.Base to be completed including making of intermediate partitions, powerpoint & UPS provision and hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. BASE- FUTURE CAR (Size-5100dia X 450 ) (Code :JO 02) JOINERY

Providing, fixing and installation of a Fiber Glass Sphere having a diameter of 3600mm and suspending it from the ceiling in the Central Atrium using metal cords (load to be calculated as per structural engineer). Glowing sun effect on the sphere will be created by 3 projectors mounted on walls in the atrium space. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM0-03)(GLOWING SUN MODEL)EXHIBIT

Providing, fixing and installation of Acrylic Glass Display Frames of size 450x300x150mm on walls along the Ramp wall from Sector 0 to Sector 1. Each Display box to have a miniature Acrylic /frp model (in extruded/relief form) of an extinct species or endangered species (species extinct due to climate change and environmental impact). Each frame to have Lighting provision and each frame to have a supporting information Graphic content beside. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM0-04)(EXTINCT SPECIES MINIATURE MODELS)EXHIBIT

Providing, fixing and installation of a Spherical ball having a diameter of 1500mm (imitating the Globe with Earth's temperature across the map) inserted in a metal shell with axles to spin the globe. The structure will be mounted on a wooden wall paneling and will be moved mechanically with the help of a steering wheel console fixed in front. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-DM0-01 (GLOBAL TEMPERATURE MODEL)EXHIBIT

Providing, fixing and installation of a small scale model of a 'Hydropower plant' made of Fiber Glass, Solid Acrylic, Acrylic Sheet, Aluminium parts, Electronic components and lichen and fixed using adhesives and screws as required. An infographic panel to be installed on the walls beside with information about the model. Exhibit will be placed on top of a base console. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM2-01 (HYDRO POWER PLANT MODEL) EXHIBIT size - 4500x 2800

Providing and making of Hydropower mounting Platform/Console (in niche as per detail) made of 19mm thk plywood structure with required wooden sections as per detail. All surface to be finished in 6mm thk Solid Acrylic. All to be completed including making of intermediate partitions, with provision of powerpoint, ELV & UPS system, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. CONSOLE FOR MODEL (Size-4500X2800X750) (Code :JO 08a) JOINERY size - 4500x 2800x 750

Providing, fixing and installation of a small scale model of a 'Tidal power plant' made of Fiber Glass, Solid Acrylic, Acrylic Sheet, Aluminium parts, Electronic components and lichen and fixed using adhesives and screws as required. An infographic panel to be installed on the walls beside with information about the model. Exhibit will be placed on top of a base console. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models'. Exhibit M-SM2-02 (TIDAL POWER PLANT MODEL) EXHIBIT 4500x 2800

Providing and making of Hydropower mounting Platform/Console (in niche as per detail) made of 19mm thk plywood structure with required wooden sections as per detail. All surface to be finished in 6mm thk Solid Acrylic. All to be completed including making of intermediate partitions, with provision of powerpoint, ELV & UPS system, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. CONSOLE FOR MODEL (Size-4500X2800X750) (Code :JO 08b) JOINERY 4500x 2800x 750

Providing, fixing and installation of a Real scale 'Wind Turbine Blade Model' (13000mm x 1850mm approx.) made of FRP and alluminium, suspending it from the true ceiling using metal cords (load to be calculated as per structural engineer). For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM0-03)(WIND TURBINE BLADE MODEL)EXHIBIT

Providing, fixing and installation of a Hemispherical Sphere (wall mounted) Radius-1750mm approx. (load to be calculated as per structural engineer). Global Wind Direction projection mapping will be created on the sphere using a projector.For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM2-03)(GLOBAL WIND DIRECTION MODEL)EXHIBIT

Providing, fixing and installation of a real Vertical Axis Wind Turbine (1500 dia x 4000mm height) made of metal and Electronic components(as per vendor) and fixed to a base using bolts and screws as required. An infographic panel to be installed on the columns beside with information about the model. Exhibit will be placed on top of a base console. Exhibit will comprise of metal blades, controller/motor, pole and accessories as per vendor. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-DM2-01 (VERTICAL AXIS WIND TURBINE) EXHIBIT

Providing and making of Vertical Axis Wind turbine Mounting Base/Plaftorm made of 19mm thk plywood and 12mm thk flexible plywood structure with required metal sections as per detail. All surface to be finished in 6mm thk Solid Acrylic. Provision for battery/motor system to be provided under base (as per vendor). All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge.(Refer detail) CONSOLE FOR VA WIND TURBINE (Size-9800X2400X550) (Code :JO 12) JOINERY

Providing, fixing and installation of a small scale model of a 'Wind farm' made of Fiber Glass, Solid Acrylic, Acrylic Sheet, Aluminium parts, Electronic components and lichen and fixed using adhesives and screws as required. Exhibit will be placed on top of a base console. A dynamic miniature model of a Horizontal axis wind turbine to be mounted on the console. A curved digital Screen behind the model will display information about Wind energy. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM2-01 (WIND FARM MODEL) EXHIBIT

Providing and making of Wind farm model mounting Platform/Console made of 19mm thk plywood and 12mm thk flexible plywood structure with required wooden/metal sections as per detail. Top surface and surface of the body to be finished in 6mm thk. Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. CONSOLE FOR WIND FARM MODEL (Size-8200X2000X750) (Code :JO 10) JOINERY

Providing, fixing and installation of a wind demonstration model which will have a pyramid-shaped tool that can be rotated on an axis and make a turbine model move in front. Tools to be fixed on a circular base.For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-DM2-03 (WIND DEMONSTRATION MODEL) EXHIBIT (Size-3050dia X 750)

Providing and making of Wind farm model mounting Platform/Console made of 19mm thk plywood and 12mm thk flexible plywood structure with required wooden/metal sections as per detail. Top surface and surface of the body to be finished in 6mm thk. Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. CONSOLE FOR WIND DEMONSTRATION MODEL (Size-3050dia X 750) (Code :JO 11) JOINERY

Providing, fixing and installation of a small scale model of a 'Geothermal Power Plant model' made of Fiber Glass, Solid Acrylic, Acrylic Sheet, Aluminium parts, Electronic components and lichen and fixed using adhesives and screws as required. Exhibit will be placed on top of a cylindrical base console. A graphic paneling behind the model will display information about Geothermal energy. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM3-01 (GEOTHERMAL POWER PLANT MODEL) EXHIBIT

Providing and making of Wind farm model mounting Platform/Console made of 19mm thk plywood and 12mm thk flexible plywood structure with required wooden/metal sections as per detail. Top surface and surface of the body to be finished in 6mm thk. Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. CONSOLE FOR GEOTHERMAL POWER PLANT MODEL (Size-2000 DIA X 1800) (Code :JO 14) JOINERY

Providing and fixing of a concave curved surface paneling in Solar Gallery (Sector 3) on which Glowing Sun made of curved plywood, finish in duco paint ( size - 4000 dia ) Effect with be mapped using projectors. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM3-03)(GLOWING SUN PROJECTION)EXHIBIT

Providing, fixing and installation of a miniature model of a 'Smart Flower'/'Solar Flower' kept on a mounting console made by FRP. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM3-03)(SMART FLOWER MODEL)EXHIBIT

Providing and making of Vertical Axis Wind turbine Mounting Base/Plaftorm made of 19mm thk plywood and 12mm thk flexible plywood structure with required metal sections as per detail. All surface to be finished in 6mm thk Solid Acrylic. Provision for battery/motor system to be provided under base (as per vendor). All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge.(Refer detail) CONSOLE FOR VA WIND TURBINE (Size-7000X2000X550) (Code :JO 12) JOINERY

Providing and installation of four Electronic devices and components (CELL-PHONE, HEADPHONE, BATTERIES, INCANDESCENT BULB)that have a major Environmental Impact and displaying them on cylindrical base consoles, covered on top with dome shaped glass lids. Each component t to have an Infographic card with it, mentioning their effects on the environment. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM4-01)(EQUIPMENT DISPLAY CONSOLE)EXHIBIT size - 800dia x 900

Providing and making of Cylindrical Console made of 19mm thk plywood and 12mm thk flexible plywood structure with required wooden/metal sections as per detail. Top surface and surface of the body to be finished in 6mm thk. Solid Acrylic. A dome-shaped glass lid to be mounted on top to cover the displayed equipment on top. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. CONSOLE FOR WIND FARM MODEL (Size- 800 dia x 750mm height) (Code :JO 16) JOINERY

Providing, fixing and installation of a small scale model of a 'Wind farm' made of Fiber Glass, Solid Acrylic, Acrylic Sheet, Aluminium parts, Electronic components and lichen and fixed using adhesives and screws as required. Exhibit will be placed on top of a base console. A dynamic miniature model of a Horizontal axis wind turbine to be mounted on the console. A curved digital Screen behind the model will display information about Wind energy. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM5-01 (SMART CITY MODEL) EXHIBIT (Size-3600DIA X 750)

Providing and making of Smart city model mounting Platform/Console made of 19mm thk plywood and 12mm thk flexible plywood structure with required wooden/metal sections as per detail. Top surface and surface of the body to be finished in 6mm thk. Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. CONSOLE FOR SMART CITY MODEL (Size-3600DIA X 750) (Code :JO 18) JOINERY

Design, supply and installation of miniature models of every-day sustainable items on 3-tiered shelves .For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-SM2-01 (SUSTAINABLE ITEM MODELS) EXHIBIT

Design, fixing and installation of 3 levels of Shelves finished in 6mm Solid Acrylic to display miniature models of sustainable items. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. SHELVES FOR MINIATURE MODELS (Size: 12220mm x 550mm) (Code :JO 17) JOINERY

Providing, supplying and installation of Silicon Statues or figurines of famous scientists and personalities on each sector. Statues to be fixed on floor slab using Iron rods (inserted in feet of figurines).All complete with approved shade and make as per drawing and direction of the engineer-in-charge.(as per vendor) SILICON STATUES EXHIBIT

Providing and supply of Museum Guide Robots to help Visitors in way-finding and giving them museum and energy related information.All robots to have touchscreen or display screen head with a speech recognizing microphone. Robots will have a parking space with powerpoint provision for charging. Guide robots will use telerobotic system,i.e; a human operator will control the robots movement from some distance away as these robots will move along a guided path. Software, power and back up requirements to be as per vendor.(Dia- 750mm approx.)For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-RB01 (GUIDE ROBOTS) EXHIBIT

Providing and supply of Humanoid Robots with minimal hand and neck movements, with ability to reply to any queries of the guests. Software, power and back up requirements to be as per vendor. For concept, specification and views, Refer to Document- 'Museum Exhibits and Exhibition models', Exhibit M-RB02 HUMANOID ROBOTS) EXHIBIT

SHORT FILMS AND DOCUMENTARIES - SOFT CONTENT FOR INTERACTIVE MEDIA - MOTION INFO-GRAPHICS - ANIMATIONS AND THEMATIC GAMING CONTENT

Earth Temperature Rise Continet Wise - (DURATION - 2 MIN)

Earth Resources Exploitaion Last Century - (DURATION - 2 MIN)

What is Climate Change & Global Warming (DURATION - 2 MIN)

Evidence of Climate Change (DURATION - 2 MIN)

Health Impacts of Climate Change (DURATION - 2 MIN)

Biodiversity Extinction (DURATION - 2 MIN)

Extreme Weather Impacts (DURATION - 2 MIN)

Human Migration, Conflicts and Economic Costs (DURATION - 2 MIN)

What is Renewability and Renewable Energy (DURATION - 15 MIN)

Types of Renewable Energy Technology (DURATION - 15 MIN)

Forests & Carbon Sequestration (DURATION - 3 MIN)

Renewable Power Generation Costs in 2020 (DURATION - 3 MIN)

Advance Mechanism of Hydro Power Plant (DURATION - 8MIN)

Types of Hydro Turbines (DURATION -8 MIN)

Facts about Hydro Power (e.g. trivia, costs, pros and cons, employment, investment trends, etc.) (DURATION - 5 MIN)

Advance Mechanism of Tidal Power Plant (DURATION - 8 MIN)

Types of Tidal Energy Harnessing Techniques (DURATION - 8MIN)

Facts about Tidal Energy (e.g. trivia, costs, pros and cons, employment, investment trends, etc.) (DURATION - 5 MIN)

Advance Working Mechanism of Wind Farm (DURATION -5 MIN)

Types of Wind Turbines (DURATION - 2 MIN)

Present of Wind Energy (DURATION - 2 MIN)

Past of Wind Energy (DURATION - 2 MIN)

Future of Wind Energy (DURATION - 2 MIN)

Global Wind Energy Data (DURATION - 2 MIN)

Advance Mechanism of Geothermal Plant (DURATION - 2 MIN)

Types of Geothermal Power Plants & its Working (DURATION - 2 MIN)

Advance Working Of Solar Power Plants (DURATION - 2 MIN)

Types of Solar Energy Systems (DURATION - 5 MIN)

Solar Energy History/ Present / Future (DURATION - 8 MIN)

Top Solar Power Plants in the World (DURATION - 2 MIN)

Growth & Employment in Solar Energy (DURATION - 2 MIN)

Solar Thermal Types and its Benefits (DURATION - 2 MIN)

Costs and Capacity of Solar Energy (DURATION - 2 MIN)

Solar PV History and Types (DURATION - 2 MIN)

Innovative Technology Changing the World (DURATION - 2 MIN)

Eco-Friendly Innovations Changing the World (DURATION - 2 MIN)

Incredible Future Technology (DURATION - 2 MIN)

Earth Saving Technology Innovations (DURATION - 2 MIN)

Earth Saving Technology & Innovations (DURATION - 2 MIN)

Feedback and testimonial about solar dome inscribed on a touch screen by the guests written by their fingertips.

Digital interactive screen where guests can interact and know more about climate change and rising temperature by clicking on various videos and data about climate change.

Interactive digital display and touch screen where guests can browse through avrious facts, datas and infographics related to various renewable power energy by interacting with the console.

Interactive digital curved display screen where guests can browse through various datas, facts, videos, related to wind energy and it's types.

Interactive digital touch screen to display various types of geothermal power plant and harnessing techniques .

Interactive digital display and touch screen where guests can know facts, datas and infographics related to various renewable power energy by interacting with the console.

Interactive digital touch screen where guests can play and attend quiz, survey, games, etc.

Interactive digital display and touch screen where guests kids can play climate change and global warming related games.

DIGITAL INTERACTIVE MEDIA CONSOLES , INTERACTIVE GAMING CONSOLES , DIGITAL DISPLAY CONSOLES. INTERACTIVE GAMING CONSOLE

Design and supply of Sofware components of the Water Pressure game including all circuit and mechanical integration, control system, Wi-fi router, Sound system Processor and speakers, provision for UPS, ELV and power points (as per vendor) SOFTWARE

Design, Supply, Installation, testing and Commissioning of all Hardware components on Water Pressure game including Wooden column structure and game Console having a metal Steering Steel. Game console wil be 900 diameter and 900mm height. 12mm flexi plywood to be used for making column structure of height 2800mm approx. and diameter 1600mm. Providing and making of wooden column structure made of 19mm thk plywood and 12mm thk flexible plywood structure with required wooden/metal sections as per detail. Top surface and surface of the body to be finished in 6mm thk. Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. WATER PRESSURE GAME COLUMN (Size-1200 DIA X 2800 HEIGHT) (Code :JO 16) JOINERY

Providing and supply of curved digital screen to be mounted on the column structure and integrated with game console and game software to display game performance. (Size-2000 ARC LENGTH X2100 HEIGHT APPROX.) DISPLAY SCREEN

Design and supply of Sofware components of the Smart Cycle Game including all circuit and mechanical integration, control system, Wi-fi router, Sound system Processor and speakers, provision for UPS, ELV and power points (as per vendor) SOFTWARE

Providing and making of wooden panel to mount digital screen and bulbs. Panel to be made of 19mm thk Plywood and finished in 6mm thk Solid Acrylic. Providing LED Light bulbs and integrating with circuit and sofware to display game performance. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. (Size-1200 X 2100 HEIGHT) JOINERY

The Flexbike

Providing and supply of flat digital screen to be mounted on the wooden panel and integrated with game console and game software to display game performance. (SCREEN - 43") DISPLAY SCREEN

Providing and supply of BOUGHT-OUT Arcade Game Consoles for Kids (as per vendor) (Size- 1300 X 720 X 1200 ) BOUGHT-OUT GAME CONSOLE WITH INTEGRATED SOFWARE. Provision for Powerpoint, UPS and ELV to be provided.

DIGITAL INTERACTIVE MEDIA CONSOLES

Providing and supply of Multi touch intercative screen console where visting guests will write their feedback, testimonials after going through the entire museum on a round touch screen panel mounted on top of the console. Console to be made up on 19mm thk Plywood and 12mm thk flexi plywood and finished in 6mm Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. (Size-4500DIA X 850mm HEIGHT) (Code :JO 03) JOINERY

Providing and supply of flat round digital screen to be mounted on the round base console integrated with software to display feedback,etc.. (Size-4450mm dia screen) DISPLAY SCREEN

Providing and supply of flat round digital screen to be mounted on the round base console integrated with software. (Size-1500mm DIA screen) DISPLAY SCREEN

Providing and supply of Intercative screen console where where guests can interact and can know facts, datas and infographics related to various renewable power energy by interacting with the console.Flat digital screen panel to be mounted on top of the panel. Touch screen Console panel (inclined) and screen mounting panel (vertical) to be made up on 19mm thk plywood and finished in 6mm Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. (Size=1250 X 2100 console HEIGHT) (Code :JO 07) JOINERY

Providing and supply of 43" DIGITAL SCREEN o be mounted on the vertical panels to display the result of touch screen activity. DIGITAL SCREEN

Providing and supply of 21" Touch Screen panel (inclined) to be mounted on the vertical panel and TOUCH SCREEN- 21" (DIGITAL SCREEN)

Providing and supply of Intercative screen console with Interactive digital curved display screen showcasing various datas, facts, videos, related to wind energy and it's types.Console to be made up on 19mm thk Plywood and 12mm thk flexi plywood and finished in 6mm Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. (Size-1550DIA X 850mm HEIGHT) (Code :JO 09) JOINERY

Providing and supply of 43" DIGITAL SCREEN o be mounted on the vertical panels to display the result of touch screen activity. DIGITAL SCREEN

Providing and supply of 21" Touch Screen panel (inclined) to be mounted on the vertical panel and TOUCH SCREEN- 21" (DIGITAL SCREEN)

Providing and supply of Intercative screen console to mount flat screen and display various types of geothermal power plant and harnessing techniques . Console to be made up on 19mm thk Plywood and 12mm thk flexi plywood and finished in 6mm Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. (Size-3200 X 1000) (Code :JO 05) JOINERY

Providing and supply of flat 43" digital screen to be mounted on the integrated with software to display relevant information. 43"DISPLAY SCREEN

Providing and supply of Intercative screen console where guests can interact and can know facts, datas and infographics related to various renewable power energy by interacting with the console.Flat digital screen panel to be mounted on top of the panel. Touch screen Console panel (inclined) and screen mounting panel (vertical) to be made up on 19mm thk plywood and finished in 6mm Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. (Size=1250 X 2100 console HEIGHT) (Code :JO 07) JOINERY

Providing and supply of 43" DIGITAL SCREEN o be mounted on the vertical panels to display the result of touch screen activity. DIGITAL SCREEN

Providing and supply of 21" Touch Screen panel (inclined) to be mounted on the vertical panel and TOUCH SCREEN- 21" (DIGITAL SCREEN)

Design and supply of Sofware components including all circuit and mechanical integration, control system, Wi-fi router, Sound system Processor and speakers, provision for UPS, ELV and power points (as per vendor) SOFTWARE

Providing and making of wooden panel to mount digital screen. Panel to be made of 19mm thk Plywood and finished in 6mm thk Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. (Size-1500 X 2100 HEIGHT) JOINERY

Providing and supply of flat digital screen to be mounted on the wooden panel and integrated with game console and game software to display game performance. (Size-43" DIGITAL SCREEN) DISPLAY SCREEN

Design and supply of Sofware components including all circuit and mechanical integration, control system, Wi-fi router, Sound system Processor and speakers, provision for UPS, ELV and power points (as per vendor) SOFTWARE

Providing and making of wooden panel to mount digital screen. Panel to be made of 19mm thk Plywood and finished in 6mm thk Solid Acrylic. All to be completed including making of intermediate partitions, with provision for powerpoint, UPS & ELV, hardware(make Hettich/Hafele) all complete with approved shade and make as per drawing and direction of the engineer-in-charge. (Size-1500 X 2100 HEIGHT) JOINERY

Providing and supply of flat digital screen to be mounted on the wooden panel and integrated with game console and game software to display game performance. (Size-(Size-43" DIGITAL SCREEN) DISPLAY SCREEN

LASER PROJECTORS

Projection Method: Ceiling mount Brightness: 9500 Lumens or more Lamp Life: 20,000 hrs. Resolution: WUXGA (1920 x 1200) Throw distance: as per site condition Aspect ratio: 16:9-10 Contrast Ratio: 300000:1 or more Display Technology: DLP Lamp Type: High efficiency Laser Phosphor Lens Shift: Horizontal & Vertical Digital Keystone: Horizontal & Vertical Inputs: HDBaseT, HDMI, DVI-D Throw ratio: 0.4 or less or as required by the site condition Terminals: HDMI, DVI-D, RS 232c Complaint port, LAN RJ- 45 network link RGB In with BNC, USB DVI Digital Input Audio In (Mini Jack) VGA Out (Dsub-15pin) Lens Shift (Standard lens) Horizontal: ±30 degrees/Vertical: ±40 degrees or more Brightness Uniformity: (typical) 90% or better Special Features: Operation of 24/7 should be possible, Edge Blending, Geometric Correction (built-in), portrait projection mode without switching lamp Warranty: 3 YEARS ONSITE Make: Barco, Christie, Panasonic or equivalent approved

Dynamic Model MDM0-02 -9500 lumens 1 chip DLP Laser WUXGA projector

Intel i7 Processor / AMD thread ripper or equivalent Window 10 pro OS (With lifetime license) with 16GB RAM or more Nvidia GPU with minimum 4 outputs supporting 7680x4320@60Hz 256 GB SSD primary drive 256 GB SSD secondary drive Motherboard supporting 1 gpu at x16 Full HD output on each display out 23/24 " Flat Panel LED Monitor with HDMI or equivalent display port Industrial grade components from high end brands like Asus, MSI, Gigabyte, corsair, coolermaster This mapping system needs to be designed to create an integrated projection mapping show with 2 or more wuxga projectors edge blended together Backup Media Server, if required Warranty: 3 Yrs. Onsite Make: I7 or thread ripper based Server

Unlimited Video layers /blocks Window 10 pro OS compatible DMX/Artnet protocol compatiable WUXGA multiple Video Playback Support for 2 or more Projectors MIDI/OSC Show control. Multi-Channel Audio. Ethernet based IP control system to switch between primary and backup server. Make: Coolux, Madmapper, Resolume, Watchout, Disguise D3 or Indiginious. Lifetime software license validity.

Should be able to transmit and receive signals distance ranging from 300 to 600 feet Make: Black magic, Design, Kramer, Extron

16 port managed switch with 1000 mbps speed

Ethernet based ip control system to trigger the show through an iPad, control signals to the projectors, light control communication support for Ethernet, RS-232/422/485, IR/Serial, DMX, iPhone, iPad, Android control app support, Physical push buttons Make: Crestron, Extron, Krammer,

Audio system shall consist of speakers and subwoofer mounted suitably in the visitors area. Make: Bose, Electro voice, JBL, Yamaha

Projector clamps

Cables for data transmission needs to of robust quality, to withstand and climatic condition. Cables should be able to withstand any electromagnetic interference in presence of any. Make: Cisco, Linksys or equivalent approved

UTP CAT 6

3Core Hard bound cables which can withstand any climatic or time based challenges

Should be able to hold all the servers and amps inside and should have a lock for security

Including programming

GRAPHICS, POSTERS, ARTWORKS

Providing and pasting backdrop graphic VINYL sticker on partition surface with approved printed design (as per drawing). Inkjet latex print on 100micron Vinyl of Avery make with 100micron Lamination of Avery make .

Orientation map of solar dome (9000x2400)

History of energy (12700 x 2400)

"The journey starts now" (Quote) (6000 x 1600)

Timeline of climate change (4000 X 2000

Warming global cities (2000 x 2100)

Carbon cycle (2000 x 2100)

Climate change and helth risks (2000 x 2100)

Climate risks (2000 x 2100)

Extreme weather events (2000 x 2100)

Disaster induced displacement (2000 x 2100)

Climate change Great displacer (4000 x 1600)

We know now we have to find an answer to global warming (4000 x 1600)

The big question- (Quote) (4400 x 1600)

Renewable energy data (4500 x 2000)

Carbon & water footprint (4500 x 2000)

History of Hydro - 2500 X 1600

Pros & cons of hydro - 2500 X 1600

History of Tidal - 2500 X 1600

Pros & cons of tidal - 2500 X 1600

Renewable energy efficiency - 2500 X 1600

Working of a hydro Dam - 2500 X 2100

Working of a tidal energy plant=PROPER(A2) - - 2500 X 2100

renewable energy infographic - - 2600 X 1800

India's renewable efforts - 5000 X 1800

History of wind energy - 2500 X 1600

Pros & cons of wind energy - 2500 X 1600

Wind capacity Global - 2500 X 1600

India's Wind Energy - 2500 X 1600

Working of a wind turbine - 5000 X 1600

Top wind farms - 5000 X 1600

solar Facts & trivias - 2500 X 1600

Active & Passive heating - 2500 X 1600

Solar Energy In India - 2500 X 1600

Types of solar gadgets - 2500 X 1600

Smartphone environmental awareness - 3200 X 1600

Pair ofjeans environmental awareness - 3200 X 1600

Energy and hfc consumption of a common split ac - 3200 X 1600

Wall graphics kids section sea - 4000 X 1600

Wall graphics kids section smart city - 4000 X 1600

Wall graphics kids section forest - 4000 X 1600

Electrolux Living Light - 2600 X 1600

Smart Finger - 2600 X 1600

Webdrone - 2600 X 1600

Groasis Waterboxx - 2600 X 1600

Reencle Food Composer Bin - 2600 X 1600

Tesla Model B - 765 X 1295

The solar tree - - 765 X 1295

Findalane - - 765 X 1295

Top innovations by big tech firms - - 765 X 1295

Rolling suitcase - - 765 X 1295

Handmader Artwork Sustainability Roadmap - - 6000 X 2400

Providing and pasting VINYL GRAPHIC CLPI ON PANEL on wall with approved printed design over Aluminium base fixed panel (as per drawing). Inkjet latex print on 100micron Vinyl of Avery make with 100micron Lamination of Avery make .

Cost of climate change - 2100 X 1500

Impacts climate change - 2100 X 1500

Climate change and biodiversity - 2100 X 1500

Species under endangered level - 2100 X 1500

Species extinct due to climate change - 2100 X 1500

Weather anomalies 2016 - - 2100 X 1500

People who notice - - 2100 X 1500

INTERIOR, FURNITURE & SOFT FURNISHING COST

CIVIL WORK

Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure, ground floor Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar

(a) 20 mm thick plaster

(i) In Ground floor

(ii) In first floor (ii) With 1:4 cement mortar

(b) 15 mm thick plaster

(i) In Ground floor

(ii) In first floor

(c) 10 mm thick plaster

(i) In Ground floor

(ii) In first floor

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof

FLOORING WORK

BLUE COMPOSITE STONE -2100X1500 - Providing and fixing of 15 mm thick Engineered Terrazzo slab of 3000mm x 1200mm on floor. The PCC sub base of 75 mm laid (cement mortar 1: 4) in proper line and level with proper compacted and adequated properly dried curing and filling the joints with approved joint filler.The stone to be fixed with adhesive with all complete as per company specefication and direction of the Engineer In Charge/ Architect. (basic material rate - Rs/- 300)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. (A) [Pakur Variety] 1:2:4 proportion

SELF LEVELLER - Providing Epoxy flooring 3mm thk. self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material. with 5 year defect liability period. (MAKE- MAPAI, BERGER OR SIMILAR)

CARPET FLOORING - Providing and Fixing of Carpet rolls flooring having a density of 70 mn fibres of nylons 6.6 per sqm firmly anchored into a waterproof backing and having an average recycled content of 20%. The carpet must inhibit the growth of Bacteria and Fungi. The Carpet must be Zero Emission carpet (Emission below detection limit after 28 days in accordance to ISO 16000-9 requirements). Fire Test EN-13501, Appearance Retention Hexapod ISO 140-8, Friction Slip resistance Test EN 14041 Class DS, Sanitized anti- microbial treatment with resilient water proof backing. The carpet should be anti stactic and thickness shall be 4.3 mm/ with approximate weight of 1.8 kg/ sqm. The carpet should be a acoustical property Impact sound Lw = 20 dB, Sound absorption = 0.10, as per ISO 354. The rate shall be inclusive of fixing at site as per the drawings and direction of Engineer in charge complete in all respect. (MAKE- DIVINE, TERKET, SQUARE FOOT/OR SIMILAR)

EPOXY FLOORING - Providing and Fixing of Epoxy flooring on exsisting surface The Surface preparation by enclosed shot blasting or scarification or diamond grinding. Finish edges with hand tools. Remove all residues to leave a dry and dust free open textured surface. Surface should be prepared as per the profile CSP 3. It shall be ensured that the moisture content in the floor shall not be more than 4% by using suitable moisture detection techniques.Providing and applying of Epoxy adhesive primer using FLOWPRIME as primer coat and allow it dry. Providing and laying high built resin rich Epoxy Self levelling screed in 2 mm thickness using Flowshield SL UL & allow it to dry. Finally after 24 hrs Providing and applying 2 mm thick Peran SL A colourful, gloss, self smoothing resin floor finish ideal for aminimalist, modern, contemporary environment. Peran SL having the below specification . System : Commercial Epoxy , 2mm Underlay + 2mm Topcoat Manufacturer: Tremco CPG PVT Ltd. Fire Resistance : EN 13501, Bfl -S1 Slip Resistance: TRRL Pendulum Slip Test, Dry >40 Impact Resistance: BS8204 Part1 Cat: A (<0.5mm) ISO6272 1kg weight >1.8m, 2kg weight >1.5m Coefficient of Thermal Expansion ASTM C531: 5.70 x 10-5 oC-1, Water Permeability: Nil–Karsten test (impermeable), Vapour Permeability: ASTM E96:90 5g/m/24hrs (at 4mm thick), Chemical Resistance : follow the chemical resistant chart Abrasion Resistance Taber Abrader:Class AR2 eels) Compressive Strength >55 N/mm2 (BS6319), Flexural Strength >35 N/mm2 (BS6319) Tensile Strength >25 N/mm2 (BS6319) Bond Strength Greater than cohesive strength of 25 N/mm2 concrete. >1.5 MPa. The rate shall be inclusive of fixing at site as per the drawings and direction of Engineer in charge complete in all respect. (MAKE- BERGER/ ENDURA/LATICRETE/FLOWCRETE/OR SIMILAR)

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Supplying & Laying of DUST CATCHER / MATT of 3M Nomad Scraper Matting 9100 for Extreme Traffic Z-Web (or Equivalent) within recessed wells. Prior sample to be approved by the EIC /Architect. (MAKE- 3M OR SIMILAR)

Providing and fixing Metal transition profile as per detail dwg. Work to be completed as per direction of the Engineer In charge / Architect.

FLOOR PROTECTION PVC SHEET-Supplying and laying 2-3mm thick PP (Polypropylene) Corrugated plastic sheets (1200mm x 2400mm) for temporary protection to Floor tiles & stones, sheets to be placed side by side and joined with 75mm wide adhesive tape.

Washing and cleaning with soap water and rubbing with oil cloth in all types of floor and dado

Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]

VITRIFIED TILE FLOORING - Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). (MAKE-SIMPOLO/ RESTILES/NITCO/OR SIMILAR) b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N Note: Add extra for each addl, floor over the rate above Ground Floor (I) upto 4 th floor- Rs. 12/-per Sq.m (II) above 4th floor -Rs. 16/- per Sq.m

CERAMIC TILE - Supplying, fitting & fixing Ceramic tiles in floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. Floor - With Polymerised Adhesive and Epoxy grout pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface) - Coloured decorative

Wall - With Polymerised Adhesive & Epoxy grout pointing With Polymerised Adhesive and Epoxy grout pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface) - Coloured decorative

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

WOODEN FLOORING : (15MM THICK ENGINEERED WOODEN FLOOR) Providing & fixing 15mm thick engineered wooden flooring (Plank thickness 15mm, top layer 2 mm veneer / hardwood, middle layer 10mm pine wood having density 650kg/m3, bottom layer 2mm balancing veneer, plank size : (190 x1200 mm), 1 & 2 trip, natural/stained/smoked, satin laquered, Fire classification as per Swedish Building code: BBR 94, warrenty 30 years. All complete as per drawing and as per direction by architect or engineer-in-charge. (MAKE- MIKASA/ PARADOR/EGO/BARE FOOT/UNIWOOD/OR SIMILAR) (Note: This work should not be executed without specific permission of Superintending Engineer). Providing and laying 2mm thick Vinyl flooring on IPS surface by SR-998 adhesive with same colour weld rod fabricating etc complete as per direction of the Engineer In Charge/ Architect.

Providing and laying 2mm thick Vinyl flooring on IPS surface by SR-998 adhesive with same colour weld rod fabricating etc complete as per direction of the Engineer In Charge/ Architect. • The flooring shall be flexible PVC (poly vinyl chloride) sheet flooring in 2.00mm thickness. • It shall have the following laminated construction: circa 0.70mm clear PVC wear layer, a fibreglass reinforced integral print layer and circa 1.30mm of PVC backing. • The flooring shall incorporate a polyurethane reinforcement. • In accordance with EN ISO 10582/EN 649, the in-use classification must be at least 34 as described in EN ISO 10874: ie commercial areas with very heavy traffic areas. • In respect of flame spread, the flooring shall have to be fully tested to EN13501-1 and certified as having Class Bfl-S1. • The product must have to be fully tested for abrasion resistance and meet the requirements of abrasion Group T, as defined in EN 649 and Binder Content Type 1 as defined in EN ISO 10582. • In respect of light fastness, the flooring shall have to be fully tested to ISO 105-BO2 Method 3 as having a pass to ≥6. • The flooring must be available in 2.01 metre width, including a 0.01 metre selvage for on site trimming, to minimise the number of joints. • A moisture test must be carried out, to ensure that the subfloor has dried out to a level consistent with the application of vinyl flooring. The result should not exceed 75%RH, if using a hygrometer, once equilibrium has been achieved. • Products must be fully conditioned to the environment in which they are to be installed. • All joints must be welded with same colour PVC weld rod. (MAKE- SQUARE FOOT/ HERITAGE/TARKETT OR SIMILAR)

WALL FINISH

POP WORKS - Providing and applying plaster of paris (super fine quality) punning with minimum thickness of 6mm and finish the surface smooth in line and also making groove, level to the entire satisfaction of Architect including scraping and hacking the existing finished surfaces, scaffolding etc. complete in all respect Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) - Super Protective 100% Acrylic Emulsion.PAINTING, VARNISHING ETC.

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : Super glosses

(a) On timber or plastered surface :(iv) Two coats (with any shade except white)

(b) On steel or other metal surface :(iv) Two coats (with any shade except white)

1.(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

1.(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Luxury Quality

Applying fire retardant paint on steel structure with luxol frameshield primer with luxol frameshield top coat

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : b) On steel or other metal surface : With super gloss (hi-gloss) - Two coats (white in shade)

Providing and fixing exterior quality Aluminium Composit Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the new frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but excluding the cost of silicon sealant), labour, scaffolding and all other incidental charges e.g. VAT, Labour cess etc complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)

Texture paint ( Insider ) :Wall painting two coats with low VOC Jotashield Tex Ultra of Jotun or equivalent approved brand in any shades and colour as directed on wall surface to give an even shade including applying of a one coat of Penetrating prmer or equivalent and two coats of paint, scaffolding to at any height with all labour and material thoroughly brushing the surface free from mortar droppings and other foreign matter and sand prepared smooth etc. complete. The substrate must be sound, clean, dry, free from dust, oil, grease and laitance etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must be removed by stiff bristle brushing. The primer / paint application is to be done with the rollers. Rate shall be including crack filling and levelling as per specfication. Top coat should have. 1) Low VOC content. 2) Crack Bridging ability upto 2.6 mm. 3) 100% pure acrylic emulsion 4) Anti-Carbonation concrete protection 5) Very Low Flame spread 6) Superior Washability.

GRAPHICKS VINYLE -Providing and pasting backdrop graphic VINYL sticker ( fire retardant) with lamination on smooth primer surface on patta paris surface on plaster surface with approved printed design (as per drawing). Inkjet latex print on 180 micron Vinyl of Avery make with 100micron Lamination of Avery make. (MAKE- 3M OR SIMILAR)

DUCO PAINT - Finishing with Duco Spray Paint (two or more coats) at all locations the surface should be cleaned,dry and cleaned fron dust ,oil, loose flex or dust ,then applied with duco spray general purpose primer ,allow drying for 30minutes ,the surface should be smooth by all necessary putty and primer works before applying finishing coarse applied as per manufacturer's specifications .recomended DFT per coat 1.5mm , etc. all complete. ((MAKE- ASIAN, BERGER OR SIMILAR)

Providing and applying PU polish Exterior grade solvent based/ on wood work of approved makes, on natural wood & natural veneer works (two or more coats) including Two coats of sealer and two to three coats of PU polish including surface preparation, sanding, scrapping etc and staining to the required colour and shade as per the manufacturers specifications and the directions of the Engineer-in-Charge including the cost of the Surface Filler, Sealer and Polish.

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in charge.The rate includes the cost of labour, adhesive and all incidental charges thereof. i) Thickness of laminate 1.5mm

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture

Providing and Fixing of 1200mm width Fabric paneling ( FROM 1200mm TO FALSE CEILING LVL) over 12mm thk. foam and 6mm plywood base.The fabric panels to be fixed ove plywood base paneling / partition finished with all necessary hardware ,labour charges , scaffolding etc all complete as per drawing with direction of the Architect/Client .

Providing and fixing of Wall Paper of approved make and quality and manufacturer over Putty base on wall with primer base. Work should be executed as per manufacturer's specifications with all necessary hardware ,labour charges , scaffolding etc all complete as per drawing with direction of the Architect/Client . (MAKE- D DECOR OR SIMILAR)

Supply, fitting & fixing 3mm thick commercial veneer over plywood base paneling / partition upto false ceiling lvl with all necessary hardware ,labour charges , scaffolding etc all complete as per drawing with direction of the Architect/Client . (PARTITION AND PANELING COST ARE EXCLUDING) basic rate of veneer

6mm Thick Annealed SGG Planilaque Evolution (lacquered glass as applicable for IGBC Gold rating) or Equivalent of approved color ; fixed with SGG Ultrafix or Glassmate (compatible neutral core silicon/double sided tape) on a perfectly leveled 19mm thick water proof marine plywood which is mounted on the wall/any other structure by an Aluminum framework not more than 900mm c/c of not less than 50mm X 25mm section as approved by Engineer. Lacquered Glass must be made industrially (via curtain coating process) and shall be opaque (if viewed against a support wall) (MAKE- SAINT GOVIND OR SIMILAR) Technical Data: PU lacquered coat : min 25 microns thick on Extra Clear Glass Color Consistency : Should pass when measured by Minolta Spectrophotometer CM5081 Durability : Should pass PERSOZ hardness test for minimum 220 oscillations Humid Resistant : Should confirm to BS EN 1036 1999 Environmental Friendly : No lead, no arsenic, no copper, no ormaldehyde Appropriate Recycled Content : 12% postindustrial / 6% postconsumer Compressive Strength : 1000 MPa, same as float glass Tensile Strength : (40 MPa) same as float glass

Providing and fixing of 6mm thk acrylic soild surface over Plywood structure for counter top / furniture base / wall surface. Soilid surface is composed of acrylic polymer and alumina trihydrate, its flammability ratings suitable for most private, public, commercial applications. All complete as per drawing and direction of the Architect/Client. (MAKE - MERINO / DUNE / LG)

SKIRTING

WOODEN PARTITION & PANELING WORKS

WALL PANELLING WITH TIMES ACOUSTIC PANEL - Providing and fixing of 68mm wall panel using Times Acoustic Panel with Class A fire rating as per ASTM E 84. The G.I. frame of thickness 0.60 consists of steel metal stud frame of size 50mm having one flange of 41mm and other of 44mm placed @ every 600 mm c/c in vertical direction. These studs are placed at floor and ceiling channels of 76 mm width and 0.60 mm thick and having equal flanges of 32 mm. The floor and ceiling channels are fixed to floor and soffit using fastners at every 600mm c/c. A horizontal frame section is placed at every 1200mm c/c .Then Hiloft Polywool of thickness 50mm and density 20Kg/m3 is fixed in between the studs. On outer side one layer of 7mm thick DIR sheet is fixed on the grid channels. Finally 10mm thk Panels are pasted on top (using any acrylic adhesive such as fevicol SR998 or hot melt adhesive) of the board as per design of the architect. 1. ASTM E 84 - Class A fire retardant (SGS) 2. IGBC certified 3. Density : 200kg/m2 4. Thickness - 10mm 5. NRC of system : 0.90 6. Made of 70% Recycled PET

WALL PARTITION WITH TIMES ACOUSTIC PANEL - Providing and fixing of 80 mm drywall partition using Calcium silicate boards of 10 mm thick.The G.I. frame of thickness 0.60 consists of steel metal stud twin frames of size 100mm having one flange of 41mm and other of 44mm placed @ every 457 mm c/c in vertical direction upto soffit and horizontally at board joints.These studs are placed at floor and ceiling channels of 100mm width and 0.60 mm thick and having equal flanges of 32 mm. The floor and ceiling channels are fixed to floor and soffit using fastners at every 600mm c/c. A horizontal frame section is placed at every 1200mm c/c in staggered pattern. The Hiloft polywool of 2 layers of thickness 25mm density 40Kg/m3 is fixed in between stud. Next one layer of 10mm thick calcium silicate board are fixed in staggered joints on inner side of the studs to avoid leakage through joints. These boards are joined using “type S” Self tapping SS W 25 / 3.5 x 25mm corrosion resistant drywall steel screws spaced at 200mm centers on all joints and 300mm centers in the field of boards. Screw fixing is done mechanically. Finally, boards and screw heads are to be jointed and finished so as to have a flush look which includes filling tapered edge and square edges of board with cement based joining compound and fibre tape (As per recommended practice of manufacturer).Finally 10 mm thick are pasted on top from inside (using any acrylic adhesive such as fevicol SR998 or hot melt adhesive) of the board as per design of the architect. Properties of 1. ASTM E 84 - Class A fire retardant (SGS) 2. IGBC certified 3. Density : 200kg/m2 4. Thickness - 10mm 5. NRC of system : 0.90 6. Made of 70% Recycled PET

PLY WALL PANELING FINISH: Providing & fixing 12mm thick IS 710 ply fixed on frame work. The framework shall be fixed as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c horizontally. The frame work shall be made from Aluminium section make JINDAL/HINDALCO conforming to IS specification In paneling, (intermediate, periM ) & (at vertical or horizontal joint of ply & at turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated with anti-termite treatment & hidden The framework shall be covered with approved make plywood(IS 710- 12 mm ply),adhesive ,tape, headless nails etc , Rate shall be inclusiveg grooves etc complete as per drawing or as directed by EIC/Architect. The rate shall be in Sq.mt of actual panelling work for all floors, at all heights, all shapes .Rate shall inclusive of all material ,labor scaffolding, tools, tackles, for all heights and for all levels, Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights /air-conditioners grills, diffusers etc & providing additional sections for strengthening around the openings/cutouts, making grooves between wall & board or as per drawing /instruction of EIC. And no extra payment shall beconsidered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the paneling including openable shutter wherever required area and finish with the same material. Rate shall be inclusive of all item inclusive part of paneling Only the clear elevation area shall be measured and paid.

WOODEN PARTITION - Providing & fixing 12mm thick IS 710 ply fixed on both side of frame work. The framework shall be fixed as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c horizontally. The frame work shall be made from Aluminium section make JINDAL/HINDALCO conforming to IS specification In paneling, (intermediate, periM ) & (at vertical or horizontal joint of ply & at turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated with anti-termite treatment & hidden The framework shall be covered with approved make plywood(IS 710- 12 mm ply),adhesive ,tape, headless nails etc , Rate shall be inclusiveg grooves etc complete as per drawing or as directed by EIC/Architect. The rate shall be in Sq.mt of actual partition work for all floors, at all heights, all shapes .Rate shall inclusive of all material ,labor scaffolding, tools, tackles, for all heights and for all levels, Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights /air-conditioners grills, diffusers etc & providing additional sections for strengthening around the openings/cutouts, making grooves between wall & board or as per drawing /instruction of EIC. And no extra payment shall beconsidered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the partition including openable shutter wherever required area and finish with the same material. Rate shall be inclusive of all item inclusive part of partition Only the clear elevation area shall be measured and paid.

WOODEN BATTEN 50 X 75

Providing and fixing 50x75mm wide teak wood batten on wall. Batten to be fixed on floor and ceiling, finished in pu coated matt lacquer polished. Work to be completed as per direction of the Engineer In Charge/ Architect.

FALSE CEILING WORKS

CALCIUM SILICATE BOARD FALSE CEILING - Providing & fixing false ceiling at all height including providing &fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of CalciumSilicate Board /POP to ceiling section and perimeter channels with thehelp of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering upto 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.

Providing and fixing 3mm thk. Commercial Venner on 19MM thK. plywood structure for ceiling trap door supported on 35x35mm salwood section as per drawing and applying proper antitermite treatment two coats of primer with MATT FINISH duco paint of approved shade, quality etc. including preparation of surface as per direction and sand papering the intermediate coats including providing necessary putty work and hardware fro trap door etc. as per drawing upto the full satisfaction of Architect / Engineer-in-charge. including scaffolding etc.

Acoustic Baffles Supply and Installation of Acoustic baffle made up polyester fibre , high density rigid panels of square edge of size 2400mmx 400mm x 20mm , density 200kg/m3, weight 4kg/m2 suspended from the soffit slab to desired height and span distance using Hanging clip with wire and Hook as per the design of the architect. Technical parameters of the baffle are: 1. Fire : ASTM E 84 - Class A fire 2. IGBC certified product manufacturer 3. Acoustics :0.5 4. Thermal Conductivity(w/mk): 0.039 5. Green( voc, RC%): Nil, 60 6. Climate(c,RH): 50,99 (MAKE- ARMSTRONG, ANUTONE, TIMES FIBREFILL OR SIMILAR)

CEMENT BOARD FALSE CEILING -False Ceiling with concealed metal (G.I.) Framework ;: Providing and fixingin position 6 mm. thick High Pressure Steam cured non-asbestos Fiber Cement Ceiling Board (Density > 1250 Kg/M3) Confirming IS 14862 & Type - BCategory - III of ISO 8336, Tested as per AS-1530 Part - 3 & BS-476 Part - 4,5,6,7 & 8 fixed to G.I. Section (perimeter channels having one flange of 20 mm. and another flange of 30 mm. with thickness of 0.55 mm. and web of length 27mm., along the perimeter of the ceiling, screws fixed to the wall with help of nylon sleeves or PVC dash fastners @ 610 mm c/c. then suspend G.I. intermidiate 'C' section with web 45 mm. and flanges of 15 mm. Each from soffit @ 1200 mm c/c with ceiling angle of size 25 mm. X 10 mm. X 0.55 mm. fixed to soffit G.I. Cleat and Steel expansion fasteners. Ceiling section of 0.55 mm. thickness having web of 51.5 mm. and two flanges of 26 mm. Each with lips of 10.55 mm., are then fixed on to the intermediate channel with the help of connecting clips in the direction perpendicular to the intermidiate channel @ 610 mm c/c) with fully threaded fiber cement screws @ 300 mm c/c. All complete as per the drawing and direction of Engineer-in-Charge. Jointing should be done by Elasto jointing compound and top finish with putty as specified by manufacturer. Section specification :- Perimeter Channel 30 mm X 20 mm X 27 mm, thickness 0.55 mm (min). Intermidiate Channel :- 15 mm X 45 mm, thickness 0.90 mm (min). Ceiling Section:51.5 mm X 26 mm X 10.55 mm, thickness 0.55 mm (min). Ceiling Angle:25 mm X 10 mm, thickness 0.55 mm (min). In ground floor.False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-GridT-2430). S

VERTICAL LINEAR BAFFLE CEILING Providing & fixing Vertical Linear Baffle Ceiling made out of Aluminum Extrusion in Aluminum alloy grade 6063. The baffle blade shall be in size of 100x 25 x 3600mm in powder coated colour finish. The baffle blade shall be suspended using Slotted U-profile at on-center spacing in multiples of 25mm. Longer lengths of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. Installation of U-Grid: The U profile to be suspended at every 1200mm on-centre using 6mm threaded rod from the structural soffit using U-profile hanger. U-profile splice to be used to join more than one U profiles of length 3.75M. 1st U-Grid Channel must be no more than 400mm from the perimeter. Installation of Baffles: Locate the slot for Baffle Hangers in slot of Baffle section at 1200mm centres. Hangers are inserted into the slot, then rotated 90° and fixed into position by tightening the grub screw. Baffle to be lifted into position and hangers engage over lip of U-Grid Channel. Each Hanger to be secured into position by inserting the Locking Clip. Baffles blades to be connected at ends with Baffle Joiner, which are inserted into the top and bottom slots of the Baffle closed profile for alignment only. The bottom Joiner to be located first and fastened on one side only. The top Joiner to be fitted then and secured with grub screws on one side. Then the two Baffle sections shall be joined and the top Joiner is screw fastened on the 2nd Baffle profile. End Caps to be located by pushing the End Cap tongues into Baffle slots. Installation shall be according to the instructions provided by manufacturer. (MAKE- ARMSTRONG, ANUTONE, TIMES FIBREFILL OR SIMILAR)

Suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I. intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc. complete)

black acoustic ceiling - Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, , Colour Black, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 66% GW & 74% RW. The tile shall be laid on Armstrong Suprafine 38 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 14 Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make The Tile & Grid system used together should carry a 10 year warranty. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. (MAKE- ARMSTRONG, ANUTONE, TIMES FIBREFILL OR SIMILAR)

HARDWARE HARDWARE :- Supplying, fitting & fixing of hardware for door, window and fixed glazing with all necessary screw or any arrangement for fixing the required hardware & prior sample to be approved by the EIC /Architect. Approved make of the hardwares are ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

BALL BEARING BUTT HINGE,SS304,SSS,5"X3.5"X3MM-2 BB,SQUARE CORNER,WITH TIMBER DOOR SCREW, SSM ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Concealed Hinge, Mx Weight 90Kg For 2 Hinge, Opening Angle 180 Degree, SC ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Mortise Cylinder Dead Lockcase, 55Mm Backset, 24Mm Forend, SSM ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET)

Euro Profile Double Cylinder, 31.5+31.5 = 63Mm, Non-Masterkeyed, SN. ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET)

Escutcheon For The Lever Handle, SSM ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET)

Euro Profile Thumb Turn Cylinder With Key, 31.5+31.5 = 63Mm, Non-Masterkeyed, SN ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET)

Side panel patch fitting for 10-12 mm glass,ss matt ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Top patch fitting for 10-12mm glass, ss matt( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET/ HARDWARE COLLECTION )

Bottom patch fitting,for 10-12mm glass, ss matt ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Hydraulic patch for wooden doors, SS 304 ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Top Pivot with SS Plate for Glass doors with Wooden Fixed Panel on Top, SS Matt ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

FS 2104 Double Action Floor Spring with 90° Hold Open and SS Cover plate, Size 4 (Without accessories), Max. door leaf weight 120kg ,SS Matt,For door widths 1000-1200mm ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Hydraulic patch for glass doors , SS 304 ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

DCL 71, Concealed Cam Efficient Door Closer, With Hold Open Clip, ALU ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

TOWER BOLT:- Brass Tower Bolt, Rectangle, 10" ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

DOOR LATCH As per DORSET MAKE & BL (S) - 3”(INCH) as approved by the architect / engineer-in-charge. ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Knob Lock with Thumb Turn from Inside and Coin Release from Outside ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Knob Lock with Thumb Turn from Inside and emergency release and indicator from Outside ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Knob Lock with Thumb Turn from Inside and key from Outside( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Pull handle (1500mm) with lock ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Pull handle (250mm) ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Flush handle for sliding door (150X54mm)( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Door stopper floor mounted As per ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Solid SS Lever Handle On Rose With Europrofile Cylinder Escutcheon ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Double Action Swing Hinge ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Allen Key WITH LOCK complete set . ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Polished Teak Wood Hande made from second class teak wood. Door Hndle size 35mm x 65mm x 1150mm

Mortise Cylinder Lockcase 55Mm Backset, 72Mm Center, 24Mm Square Forend, AB ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

LOCKING SLEEVE NICK MATT 137MM, SSM ( MAKE:-HAFELE/ HETTICH/ DORMA/ DORSET )

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including providing, fitting, fixing the shutters and all acc. in position but excluding the cost of hinges in ground floor: (a) 35mm thick shutters

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (c) Sal : Siliguri. 125 x 65mm thick sal wood door & window frame with all fittings. In ground floor

40 x 65mm thick sal wood frame with all fittings. In ground floor

ACOUSTIC DOOR _ Providing and fixing of Noise Reduction doors (make ENVIROTECH or Equivalent ) consisting of Door frame made out of good quality hard wood , section size – 100 mm x 110 mm fitted with ‘D’ type rubber gasket to block noise leakage from gap and acoustic door shutter with minimum 60 mm thickness along with fire rating and smoke Intumescent seal strip of size 10mm x 4mm for 120 minutes fire rated and STC 37dB Tested by reputedl Laboratory and having infill of 50mm thick resin bonded glasswool of 48 kg/cum density sandwiched by two 10mm thick approved quality marine grade ply and finished with 4 mm thick veneer (approved make) on both sides . Further edges of shutter shall be provided with 6mm thick teak wood beading using exterior quality synthetic adhesive, headless GI nails, screws, beading finished with approved melamine polish etc. The ply shall be resistant to vermin, mould growth, minor impact, abrasion and short term water attack and with a smooth surface suitable to receive most forms of decoration. The door supported on 65mmx125mm malaysian sal wood door frame covered with 4 mm thk veneer and 65 X 12MM teak wood architarve finished with polished including pu laquer coated. The door shall have acoustic seal in door rebates and drop dead seal at the bottom of the door including ironmongeries. HARDWARE :-The door assembly shall be fixed to the door frame with heavy duty hardware i.e. Geze/ Assa abloy/Dorma Make or equivalent make SS Hinge Size: 4”x 3”x 3mm , 600 mm SS door handle , SS Tower bolt ,Door closer , Panic Bar ,Panic trim etc. ACOUSTIC INSULATION: The Panels filled with Acoustic material Rock wool confirming to IS-8183 of 96 kg/m3 density, very good noise absorber for high, mid & low frequencies along with, 6 MM thick anti donning layer having Thermal Conductivity 0.037 @ 20 C as per EN ISO 8497 (DIN 52613) and 2 mm thick Sound Damping layer MTS 05- 303 to achieve higher Sound STC as per site condition. (REFER DOOR DETAIL SHEET) ( excluding hardware rate) Double leaf flush door - 2000 x 2400

Glass door - Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987

C) Fully glazed single leaf reamless swing door made of anodized aluminium alloy extrusions fabrication after cutting to proper shape and size, drilling and aligning fitted with heavy duty hydraulic action floor spring with top pin assembly and fitted with inbuilt locking arrangement and all other necessary fittings, fixture, adhesives and joineries, cutting the glass to requisite shape and size mounting the edges for fitting the same with dry set neoprine/EPDM gasket. The rate includes the hire charge of all tools and plants, adhesive, joineries but excludes the cost of extruded aluminium sections, glass, panel boards EPDM gasket, locking arrangement, weather gasket / wool pile, floor spring, top pin, handle, tower bolt etc.

FURNITURE

RECEPTION TABLE - Providing and making of curved Reception Counter, made of 9mm thk flexible plywood structure from bothside (partition type) with required wooden sections as per detail. Counter top to be finished in 12mm thk. solid surface pasted by adhesive. Outside surface of shutter & Drawer to be finished in PU coated matt lacquer polish on 4mm thk. veneer base and Exposed fascia (facing waiting area) to be finished in 12mm thk. Solid Acrylic.Table to be completed including making of intermediate partitions, Popup switch system on counter, lockable drawers, shutters etc (make Hettich/Hafele). Inside surface to be finished in 1 mm thk laminate of approved shade and make as per drawing and direction of the engineer-in-charge.(Refer detail) RECEPTION COUNTER (Size-10000Arc length X 750width X1050 ht )

BAGGAGE COUNTER - Providing and making of curved Reception Counter, made of 9mm thk flexible plywood structure from bothside (partition type) with required wooden sections as per detail. Counter top to be finished in 12mm thk. solid surface pasted by adhesive. Outside surface of shutter & Drawer to be finished in PU coated matt lacquer polish on 4mm thk. veneer base and Exposed fascia (facing waiting area) to be finished in 12mm thk. Solid Acrylic.Table to be completed including making of intermediate partitions, Popup switch system on counter, lockable drawers, shutters etc (make Hettich/Hafele). Inside surface to be finished in 1 mm thk laminate of approved shade and make as per drawing and direction of the engineer-in-charge.(Refer detail) RECEPTION COUNTER (Size- 3100 length X 600 width X1050 ht )

TICKET COUNTER - Providing and making of curved Reception Counter, made of 9mm thk flexible plywood structure from bothside (partition type) with required wooden sections as per detail. Counter top to be finished in 12mm thk. solid surface pasted by adhesive. Outside surface of shutter & Drawer to be finished in PU coated matt lacquer polish on 4mm thk. veneer base and Exposed fascia (facing waiting area) to be finished in 12mm thk. Solid Acrylic.Table to be completed including making of intermediate partitions, Popup switch system on counter, lockable drawers, shutters etc (make Hettich/Hafele). Inside surface to be finished in 1 mm thk laminate of approved shade and make as per drawing and direction of the engineer-in-charge.(Refer detail) RECEPTION COUNTER (Size- 3100 length X 600 width X1050 ht )

Providing and making of 40mm thk. acrylic shelve, made of 12mm thk ISI BWR grade plywood structure with required wooden sections. Surface to be finished in 2mm thk. acrylic surface with all necessary hardware fittings (Hettich/Hafele make) all complete as per drawing and as directed by the Engineer in Charge /Architect. (Refer detail)

Providing and making of Printing station as per drawing. The structure and shutter to be made of 19mm thk. and 12mm thk. ISI BWR grade B/B or plywood. Outside Surface to be finished in 4mm thk. veneer from outside with PU coated matt lacquer polish and 1mm thk. laminate from inside surface including making of intermediate shelves ,partition etc. ALL complete with all necessary hardware's fittings (make -Hettich/Hafele) & multy lock etc as per drawing and as directed by the Engineer in Charge /Architect. PRINTING STATION (Size-2860 X 500 X 750)

Janitor Closet - Providing and making of Janitor closet .The cabinet made of 19 mm thk. ISI-BWR Grade ply wood covered with 1 mm thk laminate indluding making of intermidiate laminated plywood partitions, lockable drawers, shutters,shelves etc. Finish with all necessary hardwares fittings (make Hettich/Hafele) & multy lock etc all complete as per drawing all complete as directed by the Engineer in Charge /Architect.

Console - Providing and making of console. The cabinet made of 19 mm thk. ISI-BWR Grade ply wood covered with 1 mm thk laminate indluding making of intermidiate laminated plywood partitions, lockable drawers, shutters,shelves etc. Finish with all necessary hardwares fittings (make Hettich/Hafele) & multy lock etc all complete as per drawing all complete as directed by the Engineer in Charge /Architect.

1500(L) X 750(W) X 750(H) TABLE (Granite top with MS stand) : Type - A

1500(L) X 750(W) X 900(H) TABLE (Granite top with MS stand) : Type - B

600(dia) X 750(H) TABLE (Granite top with MS stand) : Type - C

550(L) X 550(W) X 450(H) CHAIR : Type - A

550(L) X 550(W) X 600(H) CHAIR : Type - B

550(L) X 550(W) X 450(H) CHAIR : Type - C

3600(L) X 770(W) X 450(H) BENCH

450 DIA X 450 PUFF

450 X450X 450 STOOL WITH IMMERSIVE LIGHT

BLINDS

Frosted sparkling glass film : Providing and fixing 3M Scotchcal Frosted Crystal or equivalent approved Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs. MCS warranty of 3 (if exposed to direct sunlight) to 10yrs (indoors) must be endorsed by manufacturer. Rate shall be inclusive plotter cutting design as per architect suggestion. Contractor shall provide shop drawing for approval of Architect.work complete incuding all type of tools, tackles, scaffolding etc complete as per suggestion of Architect/ EIC. If in case any application finishing will not as per satisfaction contractor shall remove all film at their cost. Contractor shall do a sample mock of 5 Sq.M minimum of glass film) ,shall be approved from EIC. (MAKE- 3M OR SIMILAR)

Roller bilinds -Rollar blinds: Providing and Installation of roller blind (straight line fabric)of 0.48mm thickness and comprises of 100% Polyster,and a tube width of 38mm with a FABRIC weight of 300 GSM. .Highly dust retard fabric with a UV blockage of 95% PULLEY SYSTEM : Reducing gear pulley 1:3 for better/ easy lifting PULLEY SYSTEM : Reducing gear pulley 1:3 for better/ easy lifting. ( BLACK OUT) (MAKE- MAC, HUNTERDOUGLAS, D DECOR OR SIMILAR)

Supplying branded WOODEN blinds as per mentioned in drawing & as per decission by Architect. SLATS : Slats shall be of basswood pretreated and finished using best quality polyurethane coating.Slats shall be 50mm wide 3.00 mm thick. HEADRAILS : The headrail shall be of 0.85 thich tomized steel, U-shaped , 57 mm wide 40 mm high and coated using polyester based paint. The headrail shall house all operating components of the blind. VALANCE : A basswood valance shall be provide at top in front of the headrail. The valance shall be of the colour matching to the slats. BOTTOM RAIL : The bottom rail shall be of basswood 50 mm wide 20mm high and coated in the same colour as the slat using polyurethane coating. CORDS : Ladder string shall be of high quality polyester. Lift cord shall be of braided polyester jacket and centre core with diameter of 2.5 mm. Both shall be in colour matching to the slats and shall be securely attached to the bottom rail. OTHER HARDWEAR : Ladder string roll shall beof delrin acetal polymer with a locking prong for attaching the string. It shall clip into the 4 mm thick galvanized steel rod attached to the tilter and shall rest on the supports located inside the headrail. INSTALLATION BRACKET : Blinds shall be installed with swivel brackets. Swivel brackets shall be of galvanized steel and shall have holes to screw them onto horizontal or vertical surfaces. Brackets shall facilitate clip-on installation of headrail and shall hold the blinds firmly in position. MAKE : (MAKE- MAC, HUNTERDOUGLAS, D DECOR OR SIMILAR)

BAGGAGE SCANNER

Supply of X-Ray Security Baggage Scanner:High performance with HD image, strong penetration, precise recognition,Adopts embedded L inux operating system with multi core ARM,Energy saving and environment protection with low power consumption,64X zoom in,With the popular tunnel size of 505mm W x303mm H, compact and movable design,Color/Black &White, local enhancement, high penetration, low penetration, super enhancement, inverse color, light increase, light reduce, grey scale scan, image zoom in, edge enhancement,One touch power off,User friendly interface for easy operation

Supply of Software for Baggage Scanner

Installation testing commissioning charge of Baggage Scanner

TURNSTILE

Providing, fixing & installation of Italian design, sleek clean lines, new technology, userfriendly, and safety: these are the strong points of a 100% Italian product. • AISI 304 stainless steel outer body. • Outer body lock and key protected. • Power-mechanism with adjustable torque and speed. • Pre- rotation function that activates once a ticket is cleared for easier user passage. • Light signals that make crossing and exit streams more functional. • AISI 304 stainless steel tripod arm. • Arm drop-away function for opening up passage during emergencies or power outages. The tripod-arm rearms and works again automatically, once normality is restored. • OPEN : The turnstile freely turns when users push the tripod arm. • LOCKED : The turnstile's rotation is locked and the ticket-reading commands are inhibited. • CLEARED : Clearance to pass is given via command (for example, by entry-accreditation approval or direct command). • ENTRY/EXIT COMMANDS : Access point cleared for user to pass; the power tripod automatically stops once the person has transited through, or, with a preset closing, when no one has transited. • EMERGENCY COMMAND: It overrides all commands including the locking command (for example, open in case of emergency). Arm drop-away function for opening up passage during emergencies or power outages. The tripod-arm rearms and works again automatically, once normality is restored. • Product must be CE certified. • Specified Make/Company (OEM) should be Certified Quality & Environment in compliance with: UNI EN ISO 9001, UNI EN ISO 14001, BS OHSAS 18001:2007 CERTIFIED. • TEST certificate for Tripod Turnstile to be provided. Bidder will provide the Manufacturing Authorization Certificate from the OEM. • OEM should have Direct Presence in India. Importer & distributors Excluded & Should provides the spare part availability support for next 10 Years POST Warranty Certification to be provided for the same from OEM. • The Tripod Turnstiles should be of CAME, SKIDATA, AUTOMATIC SYSTEM.

XVia Motor-Powered Tripod Turnstile

P-Type turnstile for Physical Handicapped

Supply of Dustbins- powder coated alumininum with FRP panels and signage as per approved design by the architect. Size - dia 600mm, height - 1350mm

Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)

SIGNAGE AND FLOOR STICKER

FLOOR STICKER

Reflecting Sticker - 35MM EACH ARROW LINE THICKNESS / 125 MM WIDTH - 3M/Avery - Retroreflective UV printed sticker vinyl with plotter cutting

Reflecting Sticker - CURVED LINE - 75 MM YELLOW LINE THICKNESS - 3M/Avery - Retroreflective UV printed sticker vinyl with plotter cutting

CALORIE INDICATOR (TAKING CALORIE COUNT AFTER APPROX 8 MTRS) 250 MM DIA) 3M/Avery - Retroreflective UV printed sticker vinyl with plotter cutting

SOLAR PANEL NUMBERING BARS (TAKING CALORIE COUNT AFTER APPROX 8 MTRS) 250 MM DIA) 3M/Avery - Retroreflective UV printed sticker vinyl with plotter cutting

DIRECTION INDICATOR (TAKING CALORIE COUNT AFTER APPROX 8 MTRS) 250 MM DIA) 3M/Avery - Retroreflective UV printed sticker vinyl with plotter cutting

TEXT STICKERS ( 75 MM LETTERS) ( FOR EX - AUDITORIUM 1, AUDITORIUM 2,PHOTOBOOTH , SELFIE ZONE ETC.) 3M/Avery - Retroreflective UV printed sticker vinyl with plotter cutting

DO NOT CROSS ( 100 MM THICK) 3M/Avery - Retroreflective UV printed sticker vinyl with plotter cutting

Colour sparkling glass film : Providing and fixing 3M Scotchcal Frosted Crystal or equivalent approved Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs.

SIGNAGE

ROOM DIRECTORY SIGNAGE - Laser cut acrylic base with laser cut figure cut acrylic including PI coating

EXHIBIT LABEL SIGNAGE - 50 MM HEIGHT ACRYLIC LETTERS - Imported acrylic alser cut laser with polishing

ACRYLIC PANEL WITH GLOWING LETTERS ON BOTH SIDES - 600 MM X 1500 MM ACRYLIC PANEL SIZE GLOWING LETTERS SIZE 75 MM - MS structure with ACP / Alumunium and acrylic materials including glow acrylic letters with LED & smps

GLOWING LETTERS FOR CAFETERIA SIGNAGE AND OTHER AREAS - Solid acrylic letter of thick 25 mm front illumiinated and side PU coated epoxy letter. LATTER HEIGHT - 300 MM

GLOWING BIG LETTERS WITH INFORMATION ON SIDES - Solid acrylic letter of thick 25 mm front illumiinated and side PU coated epoxy letter. LATTER HEIGHT - 600 MM

FLOOR STANDING WAY FINDER 600X 1500 mm. MS structure with ACP / Alumunium and acrylic materials including glow acrylic letters with LED & smps

LIGHT FIXTURE

Supply, installation, testing & commissioning of Homework QS DALI UNIV , reff. brand - Lutron or equivalent (Complete with interconnection etc in all respect) with all nessesary arrangement as per manufacturer's specification "in proper location as per Design & Drawing & all completed as per direction of the Architect or Engineering-in-charge.

Supply, installation, testing & commissioning of HomeWorks QS See Touch international keypad with 8 Button Raise / Lower , reff. brand - Lutron or equivalent (Complete with interconnection etc in all respect) with all nessesary arrangement as per manufacturer's specification "in proper location as per Design & Drawing & all completed as per direction of the Architect or Engineering-in-charge.

Supply, installation, testing & commissioning of HomeWorks 2 link QSX Processor , reff. brand - Lutron or equivalent (Complete with interconnection etc in all respect) with all nessesary arrangement as per manufacturer's specification "in proper location as per Design & Drawing & all completed as per direction of the Architect or Engineering-in-charge.

Supply, installation, testing & commissioning of Power Supply in a HomeWorks, reff. brand - Lutron or equivalent (Complete with interconnection etc in all respect) with all nessesary arrangement as per manufacturer's specification "in proper location as per Design & Drawing & all completed as per direction of the Architect or Engineering-in-charge.

Supply, installation, testing & commissioning of Low-Voltage Enclosur, reff. brand - Lutron or equivalent (Complete with interconnection etc in all respect) with all nessesary arrangement as per manufacturer's specification "in proper location as per Design & Drawing & all completed as per direction of the Architect or Engineering-in-charge.

Supply, installation, testing & commissioning of Customise DB Box, reff. brand - (Complete with interconnection etc in all respect) with all necessary arrangements as per manufacturer's specification "in the proper location as per Design & Drawing & all completed as per direction of the Architect or Engineering-in-charge.

Lighting Automation Installation Charges

MECHANICAL, ELECTRICAL AND PLUMBING (MEP)

Modification and augmentation of existing MEP work Electrical work Fire fighting system HVAC work Plumbing work Extra-low voltage System (ELV) Closed-circuit television work (CCTV) Public address and fire alarm system (PA & FAS) Wireless fidelity work (WIFI) Audio & visual System ( AV work)

IT AND SERVER

Add.CGST @ 9%

Add.SGST @ 9%

Add. Cess @1%

THE SHOPP

Godrej and Boyce Mfg. Co. Ltd.