Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.3 LAccepted-AOC 4578 STREET 15 15A AGGARWAL ROAD DARYAGANJ CENTRAL DELHI DELHI 110002 UDYAM DL 01 0031798 | CENTRAL DELHI | DELHI | 110002 | ₹23.3 L Quoted ₹23.4 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹25.9 L+₹2.5 L (10.5%)Rejected-AOC | ₹25.9 L+₹2.5 L (10.5%) | L2 | Rejected-AOC Rejected |
| 3 | L3₹26.5 L+₹3.1 L (13.0%)Rejected-AOC 59 NEW MARKET CLOCK TOWER DEHRADUN UK PIN 248001 | DEHRADUN | UTTARAKHAND | 248001 | ₹26.5 L+₹3.1 L (13.0%) | L3 | Rejected-AOC Rejected |
| 4 | L4₹31.8 L+₹8.4 L (35.7%)Rejected-AOC | ₹31.8 L+₹8.4 L (35.7%) | L4 | Rejected-AOC Rejected |
| 5 | L5₹35.9 L+₹12.5 L (53.5%)Rejected-AOC 00 BHADAR TIKARMAFI BAZAR SULTANPUR UTTAR PRADESH 227413 | AMETHI | UTTAR PRADESH | 227413 | ₹35.9 L+₹12.5 L (53.5%) | L5 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | M/s badrinath Traders L3 | Balraj and Co L2 | V r traders L6 | M/s Devki Nandan Enterprises L4 | Bhanu Prakash L7 | Pragati Enterprises L8 | M/s Dev Enterprises L5 | M/s Kamal Traders L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour for replacement of unserviceable earthing with maintenance free chemical earthing with copper electrode 50mm dia thick, 2.0 mtr long buried directly in ground vertically to a depth not less than 2.10 mtr below ground level filled with highly conductive metalic compound mixture CCM with the permanent sealing of the both end, outer dia pipe 50mm with strip terminal 50x6 with terminal holes including one bag 25 kg of bfc compound, earth connected with copper strip 20 x 3 mm as earth lead by means of bolts, Nuts, check nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board protected by galvanized iron pipe medium 40 mm bore, PVC chamber as per manufacturer instruction and testing on completion.
Note: (a) If the desired earth resistance is not found within permissible limit of less than 2 Ohm, earthing shall be redone by contractor without any extra cost.
(b) Cost of copper earth strip upto 7.5 mtr, 40mm dia light grade GI pipe is included in the rate quoted for this item. | 50 | Each set | 8,000 ₹4,00,000 | 7,900 ₹3,95,000 | 16,099 ₹8,04,950 | 10,990 ₹5,49,500 | 13,500 ₹6,75,000 | 18,000 ₹9,00,000 | 11,500 ₹5,75,000 | 4,000 ₹2,00,000 Lowest |
| 2.00 | Description all as per item No 1 here in before but for electrode 3.0 mtr long, complete all specified and directed. | 50 | Each set | 11,000 ₹5,50,000 | 9,600 ₹4,80,000 | 19,999 ₹9,99,950 | 11,990 ₹5,99,500 | 20,000 ₹10,00,000 | 22,000 ₹11,00,000 | 16,000 ₹8,00,000 | 6,000 ₹3,00,000 Lowest |
| 3.00 | Material and labour for replacement of unserviceable earthing complete with copper earth plate electrode 600x600x3 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to copper earth strip 20x3 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 3 of SSR Part-I 1991 connected to earthing test point/ transformer/ panel all as directed and testing on completion as directed including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1:3:6) type C1, RCC pit cover, charcoal, salt including provision of earth lead protected by 50mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete all specified and directed.
Note:
(i) If the desired earth resistance is not found within permissible limit of less than 3 Ohm, earthing shall be redone by contractor without any extra cost.
(ii) Cost of copper earth strip upto 7.5 mtr, 50mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering is included in the rate quoted for this item. | 10 | Each set | 15,000 ₹1,50,000 | 13,500 ₹1,35,000 | 17,999 ₹1,79,990 | 15,300 ₹1,53,000 | 14,000 ₹1,40,000 | 18,000 ₹1,80,000 | 14,500 ₹1,45,000 | 8,000 ₹80,000 Lowest |
| 4.00 | Material and labour for replacement of unserviceable earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth strip 25x4 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 3 of SSR Part-I 1991 connected to earthing test point/ transformer/ panel all as directed and testing on completion as directed including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1:3:6) type C1, RCC pit cover, charcoal, salt including provision of earth lead protected by 50mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete.
Note: (i) If the desired earth resistance is not found within permissible limit of less than 5 Ohm, earthing shall be redone by contractor without any extra cost.
(ii) Cost of galvanised earth lead upto 7.5 mtr, 50mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering is included in the rate quoted for this item. | 10 | Each set | 5,000 ₹50,000 | 4,800 ₹48,000 | 4,999 ₹49,990 | 6,000 ₹60,000 | 12,000 ₹1,20,000 | 7,500 ₹75,000 | 3,800 ₹38,000 | 3,000 ₹30,000 Lowest |
| 5.00 | Description all as per item 4 above but with galvanised iron strip 32x6 mm as earthing lead and protection pipe of dia 50mm, complete all specified and directed. | 10 | Each set | 5,000 ₹50,000 | 5,500 ₹55,000 | 5,499 ₹54,990 | 7,000 ₹70,000 | 15,000 ₹1,50,000 | 9,500 ₹95,000 | 4,000 ₹40,000 | 3,500 ₹35,000 Lowest |
| 6.00 | Description all as per item 4 above but with galvanised iron wire 4 mm as earthing lead and protection pipe of dia 15 mm and GI medium grade watering pipe of size 20 mm, complete all specified and directed. | 10 | Each set | 5,000 ₹50,000 | 4,250 ₹42,500 | 4,499 ₹44,990 | 6,500 ₹65,000 | 9,000 ₹90,000 | 7,000 ₹70,000 | 4,200 ₹42,000 | 3,000 ₹30,000 Lowest |
| 7.00 | Material and labour for replacement of unserviceable earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required including taking down existing unserviceable of any type/ make etc for taking credit all as directed of following sizes and materials:-
Galvanised iron as earthing lead of size 4 mm dia, complete all specified and directed. | 40 | Runing metre | 100 ₹4,000 | 30 ₹1,200 | 29 ₹1,160 | 50 ₹2,000 | 25 ₹1,000 | 20 ₹800 Lowest | 23 ₹920 | 100 ₹4,000 |
| 7.01 | Description all as per item No 7.00 here in before but galvanised iron as earthing lead of size 25 x 4 mm, complete all specified and directed. | 45 | Runing metre | 150 ₹6,750 | 80 ₹3,600 | 109 ₹4,905 | 60 ₹2,700 Lowest | 120 ₹5,400 | 220 ₹9,900 | 120 ₹5,400 | 120 ₹5,400 |
| 7.02 | Description all as per item No 7.00 here in before but galvanised iron as earthing lead of size 32 x 6 mm, complete all specified and directed. | 45 | Runing metre | 200 ₹9,000 | 120 ₹5,400 | 269 ₹12,105 | 90 ₹4,050 Lowest | 280 ₹12,600 | 250 ₹11,250 | 230 ₹10,350 | 130 ₹5,850 |
| 7.03 | Description all as per item No 7.00 here in before but copper strip as earthing lead of size 20 x 3 mm, complete all specified and directed. | 70 | Runing metre | 450 ₹31,500 Lowest | 700 ₹49,000 | 799 ₹55,930 | 450 ₹31,500 Lowest | 899 ₹62,930 | 950 ₹66,500 | 1,050 ₹73,500 | 800 ₹56,000 |
Tender Value
₹45.9 L
EMD Value
₹91,840
Closing Date
30 Oct 2025, 6:00 pmClosed
GE Dehradun
GE (MES) Dehradun, Garhi Cantt, Mall Road, Tele - 01352750580
Special repairs for renewal of old/ obsolete earthing with maintenance free chemical earthing and allied works for E/M equipments, certain minor works under GE Dehradun
2025_MES_731497_2
8052/A/E8
Open Tender
Civil Works
Item Rate
180 days
GE Dehradun
Class D cat a (i) and b (i)
8 documents required · 8 mandatory
₹500
GE Dehradun
₹91,840
Yes
22 Dec 2025
16 Oct 2025
1 Nov 2025
16 Oct 2025
30 Oct 2025
23 Oct 2025
Amount
Material and labour for replacement of unserviceable earthing with maintenance free chemical earthing with copper electrode 50mm dia thick, 2.0 mtr long buried directly in ground vertically to a depth not less than 2.10 mtr below ground level filled with highly conductive metalic compound mixture CCM with the permanent sealing of the both end, outer dia pipe 50mm with strip terminal 50x6 with terminal holes including one bag 25 kg of bfc compound, earth connected with copper strip 20 x 3 mm as earth lead by means of bolts, Nuts, check nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board protected by galvanized iron pipe medium 40 mm bore, PVC chamber as per manufacturer instruction and testing on completion. Note: (a) If the desired earth resistance is not found within permissible limit of less than 2 Ohm, earthing shall be redone by contractor without any extra cost. (b) Cost of copper earth strip upto 7.5 mtr, 40mm dia light grade GI pipe is included in the rate quoted for this item.
Description all as per item No 1 here in before but for electrode 3.0 mtr long, complete all specified and directed.
Material and labour for replacement of unserviceable earthing complete with copper earth plate electrode 600x600x3 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to copper earth strip 20x3 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 3 of SSR Part-I 1991 connected to earthing test point/ transformer/ panel all as directed and testing on completion as directed including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1:3:6) type C1, RCC pit cover, charcoal, salt including provision of earth lead protected by 50mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete all specified and directed. Note: (i) If the desired earth resistance is not found within permissible limit of less than 3 Ohm, earthing shall be redone by contractor without any extra cost. (ii) Cost of copper earth strip upto 7.5 mtr, 50mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering is included in the rate quoted for this item.
Material and labour for replacement of unserviceable earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 Mtr below normal ground level, connected to galvanised earth strip 25x4 mm by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No. 3 of SSR Part-I 1991 connected to earthing test point/ transformer/ panel all as directed and testing on completion as directed including necessary excavation & earth work in any type of soil, funnel, PCC chamber (1:3:6) type C1, RCC pit cover, charcoal, salt including provision of earth lead protected by 50mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering complete. Note: (i) If the desired earth resistance is not found within permissible limit of less than 5 Ohm, earthing shall be redone by contractor without any extra cost. (ii) Cost of galvanised earth lead upto 7.5 mtr, 50mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering is included in the rate quoted for this item.
Description all as per item 4 above but with galvanised iron strip 32x6 mm as earthing lead and protection pipe of dia 50mm, complete all specified and directed.
Description all as per item 4 above but with galvanised iron wire 4 mm as earthing lead and protection pipe of dia 15 mm and GI medium grade watering pipe of size 20 mm, complete all specified and directed.
Material and labour for replacement of unserviceable earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required including taking down existing unserviceable of any type/ make etc for taking credit all as directed of following sizes and materials:- Galvanised iron as earthing lead of size 4 mm dia, complete all specified and directed.
Description all as per item No 7.00 here in before but galvanised iron as earthing lead of size 25 x 4 mm, complete all specified and directed.
Description all as per item No 7.00 here in before but galvanised iron as earthing lead of size 32 x 6 mm, complete all specified and directed.
Description all as per item No 7.00 here in before but copper strip as earthing lead of size 20 x 3 mm, complete all specified and directed.
Material and labour for replacement of unserviceable air termination, single pointed aluminium rod 12mm dia and 300mm long including taking down existing unserviceable of any type/ make etc for taking credit complete all specified and directed.
Material and labour for replacement of unserviceable test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw including taking down existing unserviceable of any type/ make etc for taking credit complete all specified and directed.
Material and labour for replacement of unserviceable aluminium strip 25 x 3.15 mm with saddles and fixing screws etc for roof conductors and down conductors above ground including taking down existing u/s strip of any type etc complete all specified and directed.
Supply and fixing Integral LED Street Light Luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 70 watt with efficiency 10KV SPD at system level, CCT>5700K, with average life class 50,000 burning hours, complete including GI bracket with clamps to fix flood lights fittings & 1.5 Sqmm copper wire from street light junction box to fitting all as specified and directed.
Supply and fixing of PVC (Tharmoplastic) street light junction box 250X200X100mm, heavy duty with locking arrangement, single phase and neutral two Nos copper busbar with hole for incoming and outgoing cable of size 6/10/16/25 sqmm 2 core, busbar of capacity 100 Amp PVC conduit up to the height of bottom level level of PVC Junction box from GL along with necessary MS clamp, nuts bolts and washers for fixing and one No. MCB Single Pole 240 Volts 6 Amps complete all as specified and directed.
Material and labour and installation factory fabricated bus bar chamber out door pedestal type made out of 2.0 mm thick CRCA sheet of size 750x500x400 mm duly painted with powder coating, simens grey/RAL fitted with four Nos aluminium bus bar of capacity 400 Amps duly mounted epoxy insulator , Cable connections of incoming and outgoing cables duly insulated PVC heat shrinkable sleeve 1.1 KV grade including one No MCCB, 125 Amps, 4 pole, 16 KA, with adjustable type, including glands c/p lugs etc including 50x50x6mm angle iron frame 450mm height above ground level and 450mm below ground level, angle iron frame shall be embeded in PCC (1:2:4) type B 1 block of size 200x200x200mm complete all as specified and directed.
Material and labour of laying, jointing and testing of underground XLPE insulated, armouredheavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 2 Core laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs of cable size complete all specified and directed.
Description all as per Item No 14 here-in before but 35 Sq mm, 3.5 core, complete all specified and directed.
Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in any type soil complete all as specified and directed.
Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.
Removing of excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Material and labour for sand cushioning to under ground cable, 8 cms thick before laying the cable and 15 cms thick after laying and stretching the cable in trenches, including hand punning and consolidating, complete, all as specified. Note:- For payment purpose punned thickness shall be measured.
Material and labour for laying well burnt brick sub class 'B' old size in trenches, as protection of under ground cable complete all as specified and directed.
Material and labour laying galvanised steel tubing 50 mm bore light grade laid in trenches or fixed to poles/walls etc for cable protection complete all as specified and directed.
Material and labour for cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation and mass concrete for fixing poles etc complete all as specified and directed.
Material and labour for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) for coping of pole including necessary Steel form work and finishing exposed faces of concrete smooth and even using extra cement all as specified and directed.
Material and labour, transporting, errecting and fixing steel tubular swaged poles type 410 SP-31, 9.00 metre long , complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified including painting with two coats of synthetic enamalled paint over one coat of red oxide primer and 06 Nos bands/ straps with yellow and black colour ( 30 cm wide each)epoxy heat resistant paint at a distance 30 cm from plinth block and numbering of poles with black synthetic enamel paint in 2.5 cm height including tarring/Bituminous paint one coat on steel surface embedded in concrete foundation complete all as specified and shown on drawings complete all as specified and directed..
Supply, intallation and testing of electric water heater, storage type ABS body with glass linked tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, grouting work etc complete all as specified and directed.
Supply and fixing of MCB combo box with steel enclosure with one single pole MCB 20 Amp 10 KA C series suitable for AC/geyser etc including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of GI tubing, ISI Marked, 15mm bore, `medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including necassary cutting/chasing/pinning in wall and making good the disturbed surfaces as per existing wherever required complete all as specified and as directed.
Supply and fixing of stop valves, 15mm bore dia, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed
Supply and fixing of bib tap screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed
Supply and fixing of PVC connection pipe (suitable to cold water) of 15 mm dia, upto 450mm long with two brass CP hexagonal nuts adopter rubber washer as specified and direceted.
Supply and fixing of PVC connection pipe (suitable to Hot water) of 15 mm dia upto 450mm long with brass flexible tube alongwith CP Hexagonal nuts adopter rubebr washer as specified and direceted.
Supply and fixing of sheet metal enclosures distribution board for TPN, (MCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 43 protection, with shrouded neutral bar and insulated bus bar and earth link, suitable for MCB 4 pole as incomer and MCB s as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed.
Supply and fixing of distribution board SPN 4 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar including incoming and outgoing connections with suitable size of lugs/thimbles/glands complete all as specified and directed.
Supply and fix MCB SPN 240 Volt 10 KA 40 Amp conforming to IS including connection with suitable size copper lugs complete all as specified and directed.
Supply and fix MCB SP 6 to 32A 240 Volt 10 KA conforming to IS including connection with suitable size copper lugs complete all as specified and directed.
Supply and fix of MCB TPN 63 Amps , 415 volts conforming to relevant IS including connection with suitable size copper lugs complete all as specified and directed.
Supply and fixing of sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 240 volts including connection with suitable size copper lugs complete all as specified and directed.
Material and labour for concealed submain wiring using approved colour coding as per IS, with 3 runs(N+P+E) of 4 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed PVC conduit pipe of medium duty not less than 20 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-(i) 3 runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs)
Material and labour for concealed submain wiring using approved colour coding as per IS, with 6 runs(N+3P+E) of 6 Sqmm single core,PVC insulated, unsheathed, multistranded copper conductor FRLS cable 1100 volts grade drawn through and including concealed/surface PVC conduit pipe of medium duty not less than 25 mm dia including necessary PVC conduit specials and connecting with suitable size thimble complete all as specified and directed. Note:-(i) 6 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length. (ii) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of sub main wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs)
Supply, installation, testing and commissioning of bus bar , factory fabricated bus bar chamber out door pedestal type made out of 2.0 mm thick CRCA sheet siz 750x500x400mm duly painted with powder coating, simens grey /RAL fitted with four Nos aluminium bus bar of capacity 400 Amps duly mounted epoxy insulator , cable connections of incoming and outgoing cables duly insulated PVC heat shrinkable sleeve 1.1 KV grade including one No MCCB 600 Amps , 04 pole , 50 KA , with adjustable thermal stetting Ics=100% Icu, including glands c/p lugs etc including 50x50x6mm angle iron frame 450mm height above ground level and 450mm below ground level , angle iron frame shall be embeded in PCC (1:2:4) type B 1 block of size 200x200x200mm complete all as specified and directed
Material and labour for earthing complete with copper plate 600mmx600mmx3.15mm thick electrode buried directly in ground (earth plate not less than 2.25m deep below normal ground level)with top edge of the plate not less than 1.5m below normal ground level connected to and including copper strip 20x4mm by means of steel bolts, nuts, check nuts and washers, PCC 1:2:4 in pit, angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mesh and light grade GI protection pipe 40mm bore up to 5m length for drawing in earth lead wire, salt, charcoal, etc. including excavation and earth work in any type of soil, removal of surplus spoil to a distance not exc. 50m complete all as shown in electrical plate No.3 of MES Schedule 2009 (Part-I) and connected to earth test point/LT panel all as specified including testing on completion etc complete all as specified and directed. Note::- (i) If the desired earth resistance is not found within permissible limit of less than 3 Ohm, earthing shall be redone by contractor without any extra cost. (ii) Cost of copper earth strip upto 7.5 mtr, 40mm dia light grade GI pipe and 20mm dia medium grade GI Pipe for watering is included in the rate quoted for this item.
Supply, laying and testing of XLPE insulated galvanised steel strip or wire armoured elctric power cable with stranded aluminium conductor 1100 V grade of size 25 sqmm 4 core after cutting to required length with necessary glands, nuts, bolts, and lugs complete all as specified and directed
Material and labour for concealed point wiring using approved colour coding as per IS, with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with FRLSH accessories, concealed and including provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point/bell point controlled by one switch complete all as specified and directed. NOTES : - (i) The quoted rates shall be deemed to be inclusive for cutting chases by chase cutter in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using necessary accessories/fittings. (ii) Point wiring and earth wire shall be connected to each and every flush/sunken box. (iii) All screws, fasteners, bolts, nuts and washer shall be cadmium plated and the cost of which is deemed to be included in the quoted unit rates. (a) One light/fan/bell/exhaust fan point controlled by one, 01-way modular type switch 5/6 Amp.
Supply and fixing switch Piano flush type single pole one way 230 Volts 6 Amps ,Complete all as specified and directed.
Supply and fixing ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed.
Supply and fixing exhaust fan steel body AC Single phase, 230 volt of size 300 mm sweep with blades, and frame and louvers complete with all fittings, complete all as specified and directed.
Material and labour for making suitable size hole for fixing of exhaust fan of size 300 mm in existing cement concrete / brick walls built in cement mortar and removing unserviceable/loose/broken debris upto 500m distance and making good the disturbed surface in CM 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all as directed.
NOTE:- Amount of credit of Rs. 13600.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 of tender documents in pdf form which will be deducted offline while acceptance of tender.
Balraj and Co (BID ID -3463145)
M/s badrinath Traders (BID ID -3462268)
M/s Devki Nandan Enterprises (BID ID -3460065)
M/s Dev Enterprises (BID ID -3458893)
V r traders (BID ID -3463467)
Bhanu Prakash (BID ID -3463361)
Pragati Enterprises (BID ID -3463156)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
8052Tenderadocuments.pdf
Tender Documents • 1.49 MB
BOQ_823608.xls
BOQ • 5.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .