Tender for work of Providing Double Coating 2mm thick XLPE inner side & 1.2 mm thick UV outer side on 55 mm2 Conductor for Subdivisions under Vapi Rural Division .

Supply for labour charge for XLPE with UV coating on 55 SQ MM conductor ( 1.2 MM thick ) including labour charge for Any Sub Division under Vapi Rural Division .

(A) CAPITAL WORK LABOUR RATES FOR FY 2024-25 (WITHOUT GST)

Sr No. Description UNIT Qty RATE TOTAL

Providing of Wooden Drum for insulated Conductor ( Minimum 3Km Coated Nos.

1 Conductor Per Drum)

Providing of XLPE+ UV coating on 55 sq mm conductor ( thickness 1.2 mm ) Mtr.

2 including Labour charge.

TOTAL ESTIMATE-THIRTY LAKH Only

Note :- All Rates are Excluding of GST.

Executive Engineer (O&M),

D.G.V.C.L.,Vapi Rural Division.

1. DGVCL will provide key material like M.S. materials,ABC/Bare

conductors,PSC/RSJ Poles,Insulators,Fabricated materials etc. to the

contractor.2.All fabricated items shall be fabricated as per DGVCL approved

drawing and by welding rods confirming to the relevent ISI specification and as

directed by Engineer in charge.3.Necessary electricity connection for fabrictated

items shall be provided by DGVCL on payment of required charge for connection

& electricity bill of the same shall be paid by the agency.4.All the rates are

inclusive of PF and Exclusive of GST applicable time to time.5.All steel material

are to be painted as below:(a) Scrubbing of rusted surface properly before

applying the paints on to the RSJ poles & steel fabricated materials of RSJ/PSC

poles is must required.(b) Two coats of approved ISI mark red oxide (primer) is

to be properly painted for the RSJ poles & steel fabricated materials of RSJ/PSC

poles. (c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or

equivalent quality silver paint) is to be properly painted on to the RSJ poles &