16/EDC/S 2020-21

Cable Al 3×300 sq mm XLPE 33 KV ( 1 pair of 890m in for each feeder 2×890= 1780)

GI pipe 6 inch diameter

33 KV HS cable end termination kit 3×300 sqmm straight through

33 KV HS cable jointing Kit 3×300 sqm ( O/D)

33 KV Polymer disc insulator

Disc fitting B&S type 70KN Dog

STP SP- 55 Pole ( Hot dip Galvanized)

Holding clamp for GI pipe 6× diameter with nut & Bolt

ACSR dog conductor ( O&U)

Earthing road 20×2500

Earth wire G.I. 7/16 mm 16 SWG

MS Channel 125×65mm

ms Channel 100×50mm

Holding clamp STP SP-55 with Nut & Bolt ( Top & Bottom)

HDPE PE pipe PN-6 100 dia 150 mm (PE-80 / PN-6 OD 160 mm

Safe carriage of following material from JE ( Distribution) store, srinagar to work side by Pvt. Vehicle including loading and unloading at both end

stock material ( 33 KV XLPE cable)

Cartage of steel tubular poles fromfrom JE ( Distribution) store, srinagar to rode side with loading unloading at both points ( Loading unloading plus carriage per pole SP- 55) 0-20 Km.

Head load cartage of SP-55 poles from road side to work side rate Per pole /Km.) including loading/ unloading at both points) (0 to 01 Km)

Excavation of foundation pit for erection of double pole support as per RESSPO specifiation of the following types of pole in boulder mixed soil, grouting of suppor in CC 1:4:8 including cost of ballast cement and send back filling of soil and boulders in pit and raming fitting of all acessoris on D/P

Jointing & fixing of 33 KV HS cable end termination kit 3×300 sqmm ( straigit through & O/D) work will be done by manufacturer expert.

Muffing of poles size 0.45 cm×0.60cm radious with CC 1:3:6 ( 1 cement 3 coarss sand 6 graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement stone and sand etc.

Painting of poles with angle and channel and all steel part by one coat of red oxide primer and two coats of Aluminum paint and two strip of fluorescent alternate red and white paint 30 cm wide upto 1.5 mtrs from ground level.

Supply & fixing of danger board with clamp ( N&B)

Fabrication of MS channel Angle iron after cutting in required sizes with dirling of holes upto good finish for top channel, bracking and special type bracket etc as per RESPO scedule and local approved drawing

Dismantling and Excavation work of road including all labour & material complete in all respects. As per S.O.R. ( as per PWD rates may 2019)

Laying & making of trench work including all labour & material complete in all respect ( as per PWD particuler 850×1.5 ×1) cum3 rates may 2019)

Laying spreading stringing and sagging of 11 KV line in 3 phase as per proper Ad sagging chart.

Erection and earthing of soupport with ith MS earth rod 2.5 meter long including excavation of pit and digging of MS road to propr depil and connecting the with electrode with .. Help of GI wire as per construction manual.

Laying & erection of 33 KV XLPE cable 3×300 sq mm in 1.0 mt dept including unrolling of drum

Laying & fixing of HDPE PE pipe PN- 6PE80 dia 160 mm on the 3×300 sqmm 33 KV cable.

Erection of vertical GI pipe 6'' diameter at four pole including wearing of 33 KV cable

Dismantling of existing pole SP-55 including insulator fitting channel angle brachng and clamp ete.

Extra work for damages of sewar line water supply line Drainages ( Nali) etc.

Dismantling of existing rail pole including insulator fitting channel angle braching annd clamps etc.

Removing of existing ACSR Raccon/ Dog conductor ( O&U) with opening of binding jumpering and making of bundle & back cartage from work side to JE store including loading & unloding and proper staking

Digging & fixing of making slab for 33 KV cable size 1×0.2 m with including cost of marking slab and CC

Back carrtage of Rail pole tubelar pole channel angle etc from work side to JE Store inclduing loading & unloading and proper staking .

P M ELECTRICAL COMPANY

RP INFRAPOWER PVT LTD