Supply and Installation of Synthetic Sports Flooring at Olympian Suresh Babu Indoor Stadium at Kollam

Amount

Laying and Jointing PVC Pipe. Heading

16.1 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres

16.79 Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

od150437/2018_2019 Supply and installation of IAAF approved SANDWICH type synthetic athletic surface of recommended IAAF specifications for conducting IAAF events having a minimum thickness of 13mm.The rate shall include all provision for installation of sleeves for throwing events( Pole vault, High Jump, Discus throw, Shot Put and Hammer Throw), drainage, all sleeves & drainage pipes, box for pole vault, line markings and IAAF Class II Certification as directed by the engineer-in-charge.

od150438/2018_2019 Supply and installation of the following IAAF Certified Competition Track Equipment - Removable Track kerb (white colour), installed as per IAAF specification and as directed by the Engineer-in-charge.

16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)

5.1.a Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

5.2.a Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.

5.2.b Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared Granular Surface cleaned with mechanical broom.

5.3.2.b Providing and laying bituminous macadam with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using bitumen VG 30 crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. Grading II - (19 mm nominal size )

5.6.1.b Providing and laying bituminous concrete with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder( NRMB) @ 5.2 per cent of mix and filler , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects For Grading - I (19 mm Nominal size)

3.6 Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

od150431/2018_2019 Supply and Installation of the following IAAF Certified Track Competition Equipment for Throwing Events as per the IAAF standards and as directed by the engineer-in-charge.<br>Hammer cage - one number

od150432/2018_2019 Supply and Installation of the following IAAF Certified Track Competition Equipment as per IAAF standards and as directed by the engineer-in-charge.<br> Uprights ( one pair), cross bars & landing area for Pole vault with cover - one number each

od150433/2018_2019 Supply and Installation of the following IAAF Certified Track Competition Equipment, as per the IAAF standards and as directed by the Engineer-In-Charge. :<br>Uprights ( one pair) , cross bars & landing area for High Jump with cover - one number

od150434/2018_2019 Supply and Installation of the following IAAF Certified Track Competition Equipment for Throwing Events.<br>Shot put Stop Board - one number as per IAAF standards, as directed by the Engineer-in-charge.

od150435/2018_2019 Supply and Installation of the following IAAF Certified Track Competition Equipment for Throwing Events.1. Throwing Circle - 1 Number for Shot put as per IAAF standards as directed by Engineer-incharge

od150436/2018_2019 Supply and Installation of the following IAAF Certified Track Competition Equipment for Throwing Events.<br>1. Throwing Circle -1 number for Discus Throw as per IAAF standards directed by the Engineer-in-charge

shiv naresh sports pvt ltd

ADVANCED SPORT TECHNOLOGIES LLP

Syncotts International