IV 11012/AA MW/2023 -24/CA-33/ENGR/32

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area 40 squre centimetres and above

15.28 Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 meters lead of : 154.28.1.G.S. Sheet

Dismantling doors, windows and clerestory windows (steel or wood) shtter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : of area 3 Sq. meters and below Door

Demolishing cement concrete manually by mechanical means including disposal of meterial within 50 meters lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or mix (i/c equivalent design mix)

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a led of 50 m. All kinds of soil.

2.25(a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc.complete 2.26 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 2.26.1 All kinds of soil

M/L Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

M/L 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Supply, Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber,applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).

S/Fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet

S/F Wooden door with frame including necessary fittings and fixures

S/F wooden windows with frame including necessary fittings and fixures

S/F internal electrification of the following pts Light point = 08 Nos (incl tubes/bulb) Power point 15 amp = 04 Nos Switch /socket with board = 04 Job Fan ppoint = 06 Nos (incl suppy of fans) 5 amp socket = 06 Nos

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.Kiln seasoned and chemically treated hollock wood

Providing and fixing Ply wood 5 ply with commercial ply on both faces 6 mm thick for false ceiling

PAULS CONSTRUCTION