Work of erection of structure, equipments, control wiring, yard Lighting, Control-Room Electrification etc. at 66KV Valadar S/S, Ta: Tharad, Dist: Vav-Tharad

Name of Work : Work of erection of structure, equipments, control wiring, yard Lighting, Control-Room

Electrification etc. at 66KV Valadar S/S, Ta: Tharad, Dist: Vav-Tharad.

Rate Taken From SOR: ACE(CA)/EE(CEG)/Erection SOR dated 18.05.2025. (2025-2026)

SCHEDULE B-1: MAIN ERECTION

Sr. Description of work/Supply Unit Total Rate Amount

1 Erection of equipment's of any type / make Set of 4 5535.00

with required all spares & accessories as per 3 Pole

supplier's manual and FQP, including

individual & interpole wiring of for all

mentioned voltage class switchyard (as per

respective technical specification & relevant

Special Conditions) Suitable for all types of

bus configurations. Scope includes the

dragging/loading/unloading of same from

site store to erection site. Erection of

Breakers - 66 KV

2 Erection of CT & PT CVT on erected structure Per 18 623.00

including complete dragging/ loading/ Phase

unloading of same with crane only from site

store to erection site and fixing of required

clamps, connectors & acessories as per

instructions of Engineer-In-Charge.

3 Erection of surge arrestor with counter on Per 12 415.00

Erected structure including complete Phase

dragging/loading/ unloading of the same with

crane only from site store to erection site and

fixing of required clamps, connectors as per

inst. of Engineer-In-Charge.

4 Erection of Double Breaker Isolator (All Set of 2 3459.00

make) with earth blade on its erected

structure consisting of 3 base channels with Phase

solid core porcelain insulator including

interconnected piping with operating

mechanism and accessories with final

adjustment for simultaneous mechanical &

electrical operating for opening & closing.

The rates are inclusive of dragging / loading /

unloading of the same from site store to

erection site as per instruction of Engineer-

5 - - DO - - as above but without earth blade Set of 7 2491.00

66 KV Isolator Phase

6 Erection of 66KV Solid Core porcelain/ Per 10 277.00

composite polymer Bus Post Insulator on its No

erected structure complete, fixing of

accessories and shifting of same including

loading/ unloading from its site store to

7 Laying of any size of 11/22 KV XLPE cable Mtr 100 138.00

including excavation of trench 300mm wide

& 600mm deep including laying and filling up

sand of 100mm layer from bottom & bricks

on three side of cable & refilling the trench

with Murram/soil & ramming etc. Required

bricks, sand, power cable marker/C.I./ G.I.

plate etc. will have to be supplied by the

contractor. Rates are inclusive of shifting of

cable drum to the site from S/S site store.

Drum should be handled only by jacking to

avoid damage to cables.

8 Laying of any size of 11/22 KV XLPE cable in Mtr 780 63.00

ready made cable trench or in open space.

Rates are inclusive of shifting of cable drum

to the site from S/S site store. Drum should

be handled only by jacking to avoid damage

9 Erection S/S & Equipment structure MT 25 2491.00

including punching of nut bolts. Rates are

inclusive shifting of same up to erection site

from its s/s Store.

10 Erection of 66/22 or 66/11KV, class Power

Transformer with complete mounting of all

the accessories i.e. bushings, radiators,

conservator tank etc.as per OEM approved

drawing including laying of cable between all

accessories/mounted on the transformer/

marshalling KIOSK. Filling and filtration of oil

with filter machine as per direction of

Engineer-In-Charge, manufacturer Engineer

or as per instruction manual of equipment.

All Necessary Tools tackels, Required filter

machine,Hydralic Jack, Vacuum pump etc.

require for transformer erection shall be

provided by contractor. Filtration of oil will

be in the scope of the contractor for the

ii)10 MVA No 0 20754.00

iii) 15 MVA No 2 24905.00

11 Stringing of Single Moose/AL-59/ Zebra Bus Rmtr 156 63.00

complete in all respect with fixing of all /

fitting, insulators sag compensating Phase

plate/spring and all accessories as per the

instruction of Engineer-In-Charge.

12 Preparing and fixing of required length of Rmtr 330 16.00

jumpers of single Moose/Zebra/Panther/ Per

AL-59 conductor in the switchyard on Phase

respective Bus & equipment's, tensioning &

dressing of jumpers complete as per

instruction of E.I.C.

13 Installation of earthing strips/MS Round bar Mtr 3500 43.00

in any kind of soil except Rocky (HR/SR) soil

as per earthing philosophy of GETCO

(A) For Grid Earthing:-

1) including digging of 600mm depth and

450mm wide trench

2) Cutting, laying, bending, and fixing of

Earthing Grid conductor

3) 75x10mm / 50x6mm GI Strips : Fixing of

two bolt at each stright joints and lap

welding, removing oxide films formed during

welding, appling two coats of red oxide and

black powder after welding and applying zinc

rich paint on welded joints.

4) 25/32/36/40mm Dia rod: Lap welding at

each straight joints and cross joints, removing

oxide films formed during welding, applying

two coats of Red oxide and black powder

after welding and applying zinc rich paints of

5) Including supply of red oxide paint, black

powder, HDGI Nuts & bolts as per

6) Back filling of trench with yellow/Normal

(B) For Structures and Equipment Earthing:-

1) including digging of 600mm depth and

450mm wide trench

2) Cutting, bending as per require shape,

laying and fixing of riser from grid to

structures and equipments.

3) Lap welding removing oxide films formed

during welding , applying two coats of red

oxide and black powder after welding and

applying zinc rich paint on welded joints

including supply of HDGI Nuts & Bolts for all

connections including supporting to structure

etc. as per specification.

4) Back filling of trench with yellow/Normal

50x6mm G.I. Strips

14 (a)Supply,installation,Testing & No 46 13893.00

Commissioning of maintenance free treated

earth electrode Suitable for NORMAL SOIL as

per drawing no. GETCO/E/STD/P-021 (1 of 2)

R3 dated:29-05-20 and technical specification

GETCO/E-TS-Maintenance Free earth pits/R1

dated 04.06.15 for 66/11 KV Sub-Stations

with ground enhancement material/back

filling/ grounding compound as per IEEE 80-

2000 clauses 14.5 (d) and as per Part-7 of IEC-

62561 using copper bonded earth electrode

(with 250 micron copper coating) having

mm dia.(Min) and 3000 MM length which

shall be capable of handling STC of 25 KA-1

sec. Work also includes providing BB

Masanory inspection chamber (manhole) incl.

light type CI cover.

15 Installation of 20/32/40 mm dia., 3 mtr. No. 40 158.00

Long vertical spike for mesh type earthing in

16 Fabrication for erection of any L.S. 1 4992.00

Equipment/Structure/panel or anywhere in (Max.)

s/s & F.B. at other end as per Inst. Of E.I.C.

17 Erection of support structure for 11 KV No 2 998.00

Power cable termination at 11 KV Bushing

for 10 / 15 / 20 MVA power transformer as

per Drawing No: GETCO/E/06S-STD/11 KV

1) Materail for supporting structure will be

supplied free of cost by GETCO.

2)Necessary wooden clamps with required

nut-bolts-washer & HDPE rubber piece for

packing etc as per drawing shall be supplied

3) Job also includes minor fabrication if

required as per instruction of EIC.

18 Erection of support structure for Station No 1 2196.00

Transformer as per GETCO Drawing No:

GETCO/E/06S-STD/11 KV STR- A3-03. 1)

Necessary wooden clamps with required nut-

bolt-washers & HDPE rubber piece for

packing etc.as per drawing shall be supplied

2) Job also includes erection of required 11KV

LA, D.O. fuse and any minor fabrication if

required as per instruction of EIC. 3) Material

for supporting Structure, D.O. fuse & 11KV

LA will be supplied by GETCO free of cost.

19 Providing & fixing sets of following item on Set 2 32498.00

11KV support structure system for power

cable of 66/11KV Transformer as per

instruction of EIC.

1) Allu. alloy bus bar of size 120X20X2000

mm with heat shrinkable anti tracking tubing

2) 11KV SRI of PCD 127 mm - 18 No

3) Copper laminated fusion welded flexible

jumper of size 100 X 10 X 600 mm having

2000 Amp capacity : 03 No

4) Bi Metallic Plate (Al/Cu): 03 Nos.

5) 11kV Heat Shrinkable anti tracking sleeve

on Al Bus Bar of all three Phase: 06 Mtr

6) including require GI/SS Nut-Bolt and

washer of good quality for fitting support

7) All Live parts shall be covered with heat

shrinkable MV insulated tape/sleeve

20 Erection of 11KV D.P. Structure GETCO No 10 2196.00

Drawing No: GETCO/E /06S-STD/11 KV- STR-

1) Job including errection of 11 kv A.B.

Switches, 11 KV Pin insulators, jumpiring

between 11KV Cable to 11kv Bus etc. on

errected structure.

2) Materail for DP structure, AB Switch,PI

and connector for jumpers will be supplied

free of cost by GETCO.

3) Nacessary wodden clamps with required

nut-bolt-washers & HDPE rubber piece for

packing etc. to hold 11kv power cable as per

drawing shall be supplied by contractor.

4) Job also includes minor fabrication if

required as per instruction of EIC.

21 Stringing of single ACSR Dog Bus between Set of 5 4786.00

11kV DP Str. To cross boundry Str. In all

respect with fixing of all fittings and Phase

Acccessories with supply of single tension

hardware suitable for ACSR Dog conductor .

ACSR Dog conductor will be provided by

GETCO free of cost.

22 Providing of M15 Grade Concrete for various Cmt 10 5276.00

equipment structure, Guy, 11kv DP, M.K. Box,

Neutral channels, cable support channel,

grouting of Pole/ Flood light structure with

cement, sand & metal in proportion of 1:2:4

1) work include ,Muffing and with smooth

cement mortar (1:6) finish.

2) Nacessary sand, metal, water & cement

shall be supplied by contractor.

23 Loading, Transporting & Unloading of all Job 1 51720.00

material for 66 KV substation like Structure,

indoor & out door Equipment's, DP Structure,

earthing materials, battery set, fire wedge,

GI/MS scrap, all other required materials etc.

in all respect for substation & opposite end

feeder bay from store (Any store either

const.div or R &M store within respective

zone) to Sub Station Site.

This job also includes crediting balance

materials at respective construction division

store at No. extra cost.

24 Supply & laying of 1 CoreX25mm2, armoured Mtr 30 199.00

Copper Cable, multi-strand flexible of

approved make ISI marked in ready made

trench and/or PVC pipe from Battery Charger

to Battery Set including termination at both

side as per inst. of EIC.

25 Providing and fixing of various type of sign Job 1 24957.00

Board, sticker, Big Sign Board, earthing pit

Board & Single line diagram etc. as per

instruction of IEC. Sticker of red, white, black

Letters are to be utilised for various sign

Earthing Pit Board Size:- 6" x 6" -30 Nos.

Safety Slogan Board, Hard Sheet board size 2'

x 2'and 4mm thick (Gujarati Language)- 2 Nos.

Safety Slogan Board, Hard Sheet board size 3'

x 2'and 4mm thick (Gujarati Language) with

red and Yellow colour.-03 Nos.

Single line diagram size 5' x 3' Digital with

Alluminium frame with fitting and as per

approved diagram given by IEC.-01 No.

Big sign board size 5' x 4' and 2mm thickness

indicating sub station name digital with S.S.

rod with hole & as per approved symbol with

fitting charge.- 01 No.

Switch yard sign Board 12" X 6" with 2 mm

Thickness black & white Gujarati language.-25

Safety Slogen Board size 2" x 6" in side control

Various type of control room equipment

sticker size-24 cms x 5cms.--18 Nos.

Prohibition Board: size - 5' x 3' with 2mm thick

MS Sheet on MS square pipe/ angle frame

with hole and fitting charge.- 01 No.

Maintenance Chart Board: size - 5' x 3' Digital

with Alluminium frame with fitting and as per

detail given by IEC. - 01 No.

Zero Accident Board: Size - 2' x 3' Digital with

Alluminium frame with fitting and as per detail

given by IEC. - 01 No.

Safety picture board size :- 3' x 3' (Laminated

for O/D use)-03 Nos.

Name plate board of transformer size :- 2' x 1'-

Cable marker size:- 6" x 6", Radium, fixed on

750mm long M.S.Rod for fixing arrengement.-

26 Providing and Fixing of fire stand from 75mm Job 1 4992.00

Gl pipe A class ISI mark heavy duty having 5ft

width and 4ft height as per instruction of

Engineer In Charge.

1) work includes cutting, drilling, welding of

pipe as required. Fabrication and supply of

16mm dia meter hook size required for

hanging the buckets.

2)4 nos of fire buckets are to be provided by

3)Fire stand should be grouted with

excavation of pit size 300 mm x 300 mm -

nos. 600mm depth with 1:3:6 Mix Muffing

300 mm in height including levelling of stand.

4) The fire stand is to be painted with post

box with red colour of approval quality as per

5) All required approved material including

cement, sand, metal etc. are to be provided

27 Labour charge for fixing of 11KV XLPE No 24 748.00

Indoor/Outdoor cable kit of any make for

11KV, 3C x 95 sqmm to 300 sq.mm. XLPE

power Cable kit provided by GETCO.

28 Providing & Fixing of No 12 6139.00

RAYCEM/MSEAL/CABSEAL or equivalent

approved make from GETCO heat shrinkable

type 11KV XLPE Outdoor cable Termination

kit suitable for 11KV, 3C x 95 sqmm to

sq.mm XLPE power cable by using adequate

capacity of Al. lugs .

29 Providing & Fixing of Aqua guard Total No 1 6889.00

Reviva Water R.O. Plant including

Commissioning & Testing and also with

required peripherals for installation of plant

as per site condition

(1) Dimension: 320 X 275 X 410 mm

(2) Weight : 8 KG

(3) Water flow : 8 to 12 LPH

(4) Input power : 230V AC

(5) RO membrence : TFC spiral

You have to provide guarantee for the

month from the installation.

30 Providing and fixing of ISI mark Rubber sq.mtr 20 4492.00

Matting sheet Suitable for 11KV Class As per

following specification.

Reference IS:15652-2006 with latest

Suitable for Voltage Class :B

Max Use Voltage : 11KV

AC proof voltage : 22KV

Dielectric strength : 45KV

Leakage current : < 10 micro ampere

Make : Vardhman or equivalent ( Rubber

Thickness :2.5 mm.

Surface :Chequred on one side and other side

Contractor has to supply Rubber Matting

sheet as per IS:15652-2006 with latest

amendment specification and shall submit

test certificate for routine test as per relevant

31 Providing & fixing of reputed make ISI mark No 2 6301.00

Fire Extinguisher with latest amendment Dry

chemical powder 9 kg Capacity

Note: Contractor shall submit Test certificate

for routine test as per relevant IS.

32 - Do - but CO2 type - 6.5Kg No 2 7047.00

33 - Do - but CO2 type - 22.5Kg No 2 17817.00

34 - Do - but Mechanical foam type - 50Ltr No 1 14499.00

35 Erection of Control Panel, relay panel or C/R Per. 6 691.00

panel or RTCC panel including grouting of No

panel, jointing with adjoining panels including

required fabrication for entry of control

cables and complete vermin proofing. Job

includes supply of required bolts, nuts etc.

and shifting of panel from S/S site store to

36 Erection of 11KV CB panel of any make Per. 10 2076.00

including grouting, jointing with adjoining No

panels & horizontal , vertical levelling

including required fabrication in control

panel or required stone cutting in flooring for

entry of power cable, control cable including

interpanel wiring and complete vermin

proofing. Job includes supply of required

bolts, nuts etc. and shifting of panel from S/S

site store to work site.

37 -DO- but Erection of LT panel board & Per. 2 968.00

battery charger of any make as per No

manufacturers instruction manual including

grouting, vermin proofing etc.

38 Erection of 100AH / 250AH, 110Volt D.C. Set 1 6227.00

battery set on wooden/FRP stand as per

instruction manual of supplier, including first

filling of battery solution (electrolyte), proper

connection of cells and applying,

charging/discharging cycles as per

manufacturer's instruction manual and

instruction of EIC.

39 Erection of station transformer of 22 KV or Per. 1 2214.00

11KV / 430 V on its plinth/ erected str., No

grouting of foundation bolts, fixing of

channels, danger board etc. including

connection with power cable/LV cable

terminations including shifting from S/S site

store to plinth/ erected str., as per

instruction of Engineer-In-Charge.

TOTAL - 1 ( SCHEDULE B - 1 )

SCHEDULE B - 2 : CONTROL WIRING

Sr Description of work/Supply Unit Total Rate Amount

40 Preparing of Complete schedule of wiring for Bay 4 1996.00

line /transformer bay for 66 KV Bays in

triplicate. Necessary drawing will be provided

by the GETCO. Schedule should be approved

by EE or DE in charge.

41 Laying of 1.1KV PVC armoured copper / RMtr 2800 6.00

aluminium cable, 2c x 2.5mm Sq., 2c x

4c x 4mm Sq. copper control cable or any

equivalent size of all L.T.power cable inside

Hume pipe/cable trench including binding /

clamping of cable with GI wire as per the

requirement including the supply and fixing

of identification tags on both ends and at

distance every 10 mtrs.

42 Laying of 1.1KV PVC, armoured copper / RMtr 1700 10.00

aluminium cable 12c x 2.5mm Sq., 12c x

x 2.5 mm Sq. copper control cable, 3.5 c or

c x 10 mm sq. , 70 mmsq. aluminium

armoured or unarmoured L.T. power cable

inside Hume pipe/cable trench including

binding / clamping of cable with GI wire or

shaddles as per the requirement including

the supply and fixing of identification tags on

both ends and at distance every 10 mtrs.

43 Laying of 1.1KV PVC armoured copper / RMtr 320 21.00

aluminium cable , 2c x 2.5mm Sq., 2c x

4c x 4mm Sq. copper control cable or any

equivalent size of all L.T.power cable in

ground by digging trench of suitable width

and 450 mm depth in any type of soil

including the supply and fixing of

identification tags on both ends and at

distance every 10 mtrs.

44 Laying of 1.1KV PVC armoured copper / RMtr 150 26.00

aluminium cable 12c x 2.5mm Sq., 12c x

x 2.5 mm Sq. copper control cable, 3.5 c or

c x 10 mm sq. ,70 mmsq. aluminium

armoured or unarmoured L.T. power cable in

ground by digging trench of suitable width

and 450 mm depth in any type of soil

including the supply and fixing of

identification tags on both ends and at

distance every 10 mtrs.

45 Providing and fixing 'B' class G.I. pipes of Mtr.

following size for cable protection including

fixing with the structures.( Non SOR)

including required 'L' & 'T' band,coupling for

CT,PT, Transformer, M.K.Box cabling on

structure including required

fabrication.(weight of pipe-25kg/meter)

{a} 40mm dia Mtr. 150 255.00

{b} 50mm dia Mtr. 100 284.00

46 Termination of Control Cable at Panel / M.K./ End 180 199.00

Equipment's including supply of required size

of Double compression type metal glands,

lugs, ferrules, PVC Binding Tape, Buttons,

cable ties etc. for Up to 7 Core Control

47 As above but for Above 7 Core Control Cable. End 90 349.00

48 Providing & installation and commissioning of Job 1 6489.00

remote control switch board for ON/OFF

control of all 11kv panel at operator table

with supply of good quality metal sheet box (

18 SWG ) size 450 x 450 x 125 mm with door,

20 nos standard ISI make and rating industrial

push botton,indication lamp(LED) terminal

connectors fixed on C-type channel etc with

installing accept/reset arrangement with

required ISI marked copper flexible wire size

2.5 Sq. mm including complete wiring in PVC

pipe and fixing on wall as per inst. of EIC. only

19/27 core x 2.5 sqmm cable supply by

49 Providing & Fixing of 3-phase, 100KVA LTDB No. 1 29950.00

all weather proof, cold rolled sheet steel of

16SWG with gray powder coating having

higher size sheet for bottom with provision

for cable entries & rubber ring provided in

the door for water proofing & vermin

proofing as Main AC Dist. Box (MDB) having

size 835X480X900 mm with base frame of

40X40X4 mm angle section for distribution

transformer in switch yard for distribution of

AC Supply before LT Panel having 01 Nos.

250A SFU & 2 nos.of 100 Amp. MCCB for

O/G feeders (SFU & All MCCBs are with

"L&T/Siemens make or any equievalent

standard only as per IS specification) with

adequate capacity of colour coded copper

busbars (3-phase & neutral) as per drawing

50 Providing & Fixing of all weather proof, cold No. 1 24250.00

rolled sheet (of atandard SWG)steel Yard AC

Dist. Box having

(1) one no 63A, 4P MCB as main I/C

(2) 09 Nos. of 32A, 4P, MCB as O/G feeders

(3) 6 nos of 32A, DP MCB as O/G feeders as

per drawing enclosed (Note: All internal

wiring should be with 2.5sq. mm flexible wire

including supply & fixing of copper lugs with

51 Providing and fixing of all weather proof, No 6 21549.00

cold rolled sheet steel junction box for CVT

& PT, CT terminations with 30 Nos. of

disconnecting type, 'Elmex' make CATDM 4 or

equivalent type connectors and required no

of fuses, links etc.as per instruction of

Engineer-in-charge, as per approved schedule

of cable, GETCO Approved Vendor i.e.

TOTAL - 2 ( SCHEDULE B - 2 )

SCHEDULE B - 3 : YARD LIGHTING

Sr Description of work/Supply Unit Total Rate Amount

52 Providing & fixing of all weather proof, cold No 1 24732.00

rolled sheet steel AC Panel - 2 for Yard-Light

AC supply having

(1) 63A 4P MCB : 01 NO

(2) MCX-12A contactor : 01 NO

(3) Digital Timer : 01 NO

(4) 20A TPN MCB : 06 NOS

(5) Indication lamp : 03 NOS

(6) Push Butten : 02 NOS

(7) Terminal Connector as per site

and other detail as per drawing enclosed

including grouting & Necessary fabrication of

GI Angle or fixing on GI Structure, including

earthing with main grid as per instruction of

53 Supplying & laying of following size Mtr 150 292.00

Control/L.T power cable in readymade cable

trench or by excavating in any type of soil

cable trench size 300mm wide 600mm depth

and refilling the same as per the direction of

EIC. Item Includes the cable laying up to

termination box with clamps & proper

clamping of cable on gantries by GI pipe &

glands as per direction. Item includes

providing & supply of bricks, sand as per

requirement. The L.T power cable to be

provided by contractor as under :As per ISI

1554 (Part-I). 3.5 Core x 50 mm2 Aluminium

cable -Armoured, from distribution X'mer to

Main Distribution Board near dist. X'mer and

from MDB to indoor LT panel board (LTPB) -

54 Supplying & laying of following size Mtr 200 175.00

Control/L.T power cable of FINOLEX or

equivalent ISI make in readymade cable

trench or by excavating in any type of soil

cable trench size 300mm wide and 600mm

depth and refilling the same as per the

direction of EIC. Item Includes the cable

laying up to termination box with clamps &

proper clamping of cable on gantries by GI

pipe & glands as per direction. Item includes

providing & fixing of bricks, sand as per

requirement to protect cables . The L.T

power cable to be provided by contractor as

under :As per ISI 1554 (Part-I). 4 Core x

mm2 Aluminium cable -Armored, from LT

panel board (LTPB) to Yard Light AC MK (AC

Panel-2)., AC Panel 1 in C.R. and yard AC

55 - - do - - 4C x 4mm2 Copper cable - Mtr 600 19.00

Armoured, from yard-light AC MK (AC panel-

2) to all yard-light fixture junction boxes on

LM & street light pole & Station transformer

to Colony & LT panel to watchman cabin.

Note: Cable laying work either in ready

made cable trench or by excavating in any

type of soil if required (Only laying. Cable

will be supplied by GETCO)

56 - - do - - 4C x 2.5mm2 Copper cable - Mtr 190 19.00

Armoured, from yard-light AC panel-2 to all

junction boxes on post top lantern

Note: Cable laying work either in ready

made cable trench or by excavating in any

type of soil if required (Only laying. Cable

will be supplied by GETCO)

57 Providing & fixing of 'B' class ISI marked GI. Mtr. 60 180.00

Pipe of 32/40mm dia for cable looping &

road crossing with necessary elbo/band for

each pole & J.Box for yard lighting & for

control-room flud lights wiring work with

fixing on wall with shadles if required as per

58 Providing & erection of swaged type welded No. 6 9983.00

GI tubular street light pole, by excavating as

per inst. of E.I.C. in any type of soil confirming

to relevent IS made of GI tubes of following

size For Pole having Over all length 7.0 Mtr.

Effrective length of section. Bottom 4 Mtr.

long, 114.3mm outer dia and 3.61mm thick,

middle 1.50 mtr long, 88.9mm outer dia &

3.25mm thick, top 1.5mtr long, 76.1 mm dia

(outer) and 3.25mm thick with 1 Mtr long

plus 240x240x16 mm thick MS base plate

welded to the pole as per atached Drawing

No.GETCO/E/STD/LTG.POLE-R2

59 Providing & erection of 4.5 mtr long swaged No 4 6988.00

type welded GI tubular POST TOP LATERN

POLE on foundation in any type of soil as per

inst. Of E.I.C confirming to relevent IS and as

per attached drawing no.

GETCO/E/STD/LTG.Pole (R2)

60 Supply and fixing of Pole/Wall/Structure No 31 748.00

mounted FRP junction box of any standard

reputed make of required size with clamp,

providing 1 SPN MCB of 16 A having short ckt

breaking capacity of 10KA peak of standard

ISI make like L&T/ANCHOR/MDS /HAVELLS &

2 Nos. of stud type connector of standard

make like Connectwell. The cable glands &

lugs are also included for both incoming &

out going cables Amp. of standard make like

61 Earthing to tubular pole/luminaries,by coil No 10 400.00

type earthing at 10 SWG, GI wire in earth pit

of 1.5 mtr. Depth in any type of solil by using

salt/ coke (charcoal) 16 kgs each & remaining

filling with YELLOW/Normal soil & clamping

the earth wire with pole & Junction box.

62 Providing and fixing of LED flood light fixure No 18 7487.00

on swaged pole / GI structure by providing

required fabrications, of CGL, HPL, Bajaj,

Havells, Orient Electric ltd make, suitable for

1 x 150 Watt LED fixure with Pressure Die

Cast Housing, IP-65 or more Ingress

Protection, ≥3kV Surge Protector(Internal),

≥10kV Surge Protector(external). 4 core

sqmm double insulated flexible stranded wire

should be used from LED fixture to approved

SMC type junction box as per inst. of E.I.C..

63 Providing & fixing of LED Street Light fixtures No 6 9593.00

(1x120W) (CGL Cat-No. - LSTO120/CDL 120W

or equivalent under Cat-II or above as per R &

B SOR ) , 4 core 2.5 sqmm2 double insulated

flexible strended wire should be used from

control gear fitting to approved SMC type

Junction Box as per inst. of EIC.

64 Providing & fixing of (1x40Watt) LED Post No 6 7556.00

Top Lantern fixtures (CGL Cat-Log - LPTO-

40/CDL 40W or equivalent under Cat-II or

above as per R&B SOR) complete fitting in all

respect and 4 core x 2.5mm2 double

insulated pvc flexible copper cable from

control gear fitting to SMC junction box as

per instruction of EIC ( 4 No are to be

provided on Main Gate & 3 No are to be

provided on 4.5 Mtr Tubular pole).

TOTAL - 3 ( SCHEDULE B - 3 )

SCHEDULE B - 4 : CONTROL ROOM INDUSTRIAL ELECTRIFICATION

Sr Description of work/Supply Unit Total Rate Amount

65 Providing and fixing of DBS as AC Panel - 1 No 1 6738

for CR of ISI marked Powder coated Pearl DBS

of ivory color , wall mounting, Double door

Distribution board of L&T, Heggar or higher

make fitted with 63Amp Phase Bus bar, Earth

/ Neutral Bars and inter connecting wires

with removable bottom gland plates for all

power cable entry from bottom with DIN

Channel ,incoming contact and 1No - 63Amp

TPN MCB 'C' Series ,6Nos-20A SP MCB 'C'

Series and 13No -10A SP MCB 'C' Series All

MCBs are L&T, Anchor or Higher make only.

Complete in all respect and as per instruction

66 Supplying & Laying Sub-main lines of 3X2.5 Rmtr 200 125

mm2 (two for P & N and one for Earthing)

copper PVC insulated wire of ISI brand in

suitable standard make steel conduit pipe

having minimum 1.5 mm thickness of

approved brand with ISI brand with clamps

with it's associated accessories for various

circuits amanating from AC panel 1.as per

inst. of E.I.C.

67 Point wiring for control room tube lights, Point 60 1298

fans, exhaust fans, fency lights, water tight

bulck head lights with PVC insulated 660 V

grade standard copper wire in ISI make GI

conduct pipe 20 mm dia and 1.6 mm wall

thickness size fitted with sadles on the

wall/ceiling. Size of wire shall be with 3C x

sq.mm PVC insulated copper wire for phase

and neutral and earth wire [ Green] and

Amp Anchor/Roma or any equivalent switch

as per specification with 16 gauge M.S. box.

The box shall be covered with 3 mm thick

decorative mat finish hylum sheet. The work

is all inclusive of supply and fixing of required

materials as afore said [ like G.I. conduct

pipe , sadles , switches , Steel box , ceiling

Rose , flexible copper wire etc.] to complete

point wiring with each fixture to be earthed

by SWG-12 stranded copper conductor

having green color as per direction and

instructions of E.I.C.

68 Providing, fixing & termination for Job 1 4492.00

emergency D.C. supply arrangement. This

job includes supply & laying of 2C x 2.5 mm2

Copper armoured cable from battery charges

to SBDC, fixing & providing SBDC & complete

wiring with supply of wire & D.C. lamp (110V

D.C., 100 watt-4 Nos.) in standard steel

conduit pipe as per inst. of E.I.C.

69 Providing and Fixing points wiring in GI. Point 6 1213

Conduct pipe size 20 mm dia and 1.6 mm

wall thickness with single PVC insulated

Sqmm. copper wire of ISI standard good

quality using 1.5mm thick suitable size ISI

mark Anchor brand 15 Amp. 250 Volt 5 pin

plug socket as separate plug point with

shock proof accessories incl. indication lamp ;

erected on separate decorative mat finish

hylum sheet board on wall with providing

adequate green earthing wire as per

specification and instruction of Engineer In

70 ---- Do ---- as above but with single PVC Point 6 814

insulated 3Cx1.5 sq. mm.copper wire of ISI

mark plug socket for 5A domestic use

separate plug points as per direction and

instruction of E.I.C.

71 ---- Do ---- as above but looped on same Point 10 199.00

board i.e. no separate board, plug socket for

5A domestic use as per direction and

instruction of E.I.C.

72 Providing & Fixing of Ceiling Fan of 1400mm No 9 1797.00

sweep Bajaj/Crompton / Orient/ usha /

Cinni make (ISI approved).Fan is to be

purchase from authorised dealer. Flexible

wiring by using twin core double PVC 48/0.2

mm copper flexible cord of suitable &

approved make and size from ceiling rose up

to fan terminal & supply and fixing of energy

saver regulators , extra GI pipe of required

size and length for lowering of fan if required

as per instruction of EIC.

73 Providing and fixing of 50 W LED Lighting No 18 5059.00

fixture (CGL Cat No. LCTLR-50-FO-CDL 50W

or equivalent under Cat-II or above as per

R&B SOR), 4-core 2.5mm2 double insulated

flexible strended wire should be used from

control gear fitting to approved SMC type

junction box as per inst. of ELC.

74 Providing & fixing of 41.5W LED lighting No 4 3154.00

fixture (CGL Cat No.LPFC-36-CDL 41.5W or

equivalent under Cat-II or above as per R&B

SOR) as per instruction of EIC.

75 Providing and fixing of 40W (1x4) LED No 4 3417.00

Lighting fixture as per drawing ( in office

area & Porch Area) (CGL Cat no.LCTLSN-40-

CDL (1x4) 40W or equivalent under Cat-II or

above as per R&B SOR) as per instruction of

76 Providing & fixing of 30W LED Street light No 8 2678.00

Bulkhead (CGL Cat no LSTO-30-CDL 30W or

equivalent under Catt-II or above as per R&B

SOR) on out side C/R building and inside

cable trench in C/R including wiring from

ceilling rose to fixture with suitable size of

pvc insulatd ISI marked copper wire only as

per inst. of EIC.

77 Providing and fixing of heavy duty exhaust No 2 3494.00

fan in battery room size 18" of Make

GEC/KHAITAN/ CROMPTON/ BAJAJ incl. M.S.

lourex shutter of Fan & necessary wall

finishing works and applying bird proof net

on outside wall with required arrangement

for rain water sealing and necessary

connection from ceiling rose as per Direction

and instruction of EIC.

78 Providing & Fixing of Electric bell with bell No 1 149

switch near officer's table. All materials must

be ISI mark and approved by EIC.

79 Providing and fixing of 18 watt LED Lighting No 6 1281.00

fixture (CGL Cat no. LCTL-18-CDL 18W or

equivalent under Cat-II or above as per R&B

SOR) for toilet & other amenities as per

instruction of EICas per inst.of EIC.

80 Providing & Fixing of G.I. 1.5 Mtr long, 16MM No 6 141.00

Dia Lighting Rod (Spike) for Lighting

Protection of Control Room Building as per

instruction of EIC as shown in Drawing No

GETCO/E/STD/DLSP-66KV CR-R0 Dtd.

81 Providing & Fixing of 50 x 6 mm GI Flat for RMtr 125 296

Control Room DSLP Protection. The Work is

to be carried out as per DRG No.

GETCO/E/STD/DLSP-66KV CR, R0

Dtd.26.10.17 as per inst of EIC. The rates are

including fixing of clamps on wall which is to

be fabricated from 50X6 GI strip. (GI strip will

be supplied by GETCO free of cost)

TOTAL - 4 ( SCHEDULE B - 4 )

SCHEDULE B - 5 : SUPPLY OF FURNITURE

Sr Description of work/Supply Unit Total Rate Amount

82 Supply of Steel Chair 'S' type, overhanging No. 2.00 1850.00

arm with cushion with cane seat/ 1"x16"

gauge round pipe frame complete as per

instruction of EIC & procurement from Adult

training centre for blind,Ahmedabad

Samanvay Saranjam-Rajkot, Saurastra

Rachnatmak Samiti, Rajkot, Udyog Bharti-

Gondal or any other Govt. approved

organization only.

83 Supply of Steel Rack of size 36"x30"x12" (3' x No. 1.00 2100.00

2.5'x1') with three partitions, prepared with

20 gauges as per instruction of EIC &

procurement from Adult training centre for

blind,Ahmedabad , Samanvay Saranjam-

Rajkot, Saurastra Rachnatmak Samiti, Rajkot,

Udyog Bharti-Gondal or any other Govt.

approved organization only.

84 Supply of Steel Table of size 54"x30"x30" No. 1.00 8750.00

(4.5' x 2.5' x 2.5') one side three drawers, one

side shelf 1x18 gauge square pipe with Nova

PAN Prelaminated top complete with locking

arrangement to drawers & self as per

instruction of EIC & procurement from Adult

training centre for blind,Ahmedabad

Samanvay Saranjam-Rajkot, Saurastra

Rachnatmak Samiti, Rajkot, Udyog Bharti-

Gondal or any other Govt. approved

organization only.

85 Supply of Computer Table from No. 1.00 7200.00

prelaminated board with Key board facility

and drawer with locking facility with

continuous printer out facility & mouse tray

and also with special tray fo CPU & UPS

having size 42''x24''x30'' complete as per

instruction of EIC & procurement from Adult

training centre for blind,Ahmedabad

Samanvay Saranjam-Rajkot, Saurastra

Rachnatmak Samiti, Rajkot, Udyog Bharti-

Gondal or any other Govt. approved

organization only.

86 Supply of Steel revolving Chair, revolving & No. 1.00 4600.00

tilting, low back high type seat with foam

rubber 3" in seat 2" in back with good quality

raxine cover ,five legs. Chromium plated

frame complete as per instruction of EIC &

procurement from Adult training centre for

blind,Ahmedabad , Samanvay Saranjam-

Rajkot, Saurastra Rachnatmak Samiti, Rajkot,

Udyog Bharti-Gondal or any other Govt.

approved organization only.

87 Supply of Steel Cupboard , of size No. 1.00 9200.00

78"x36"x18" four partition, door & Shelves

20 gauge complete as per instruction of EIC &

procurement from Adult training centre for

blind,Ahmedabad , Samanvay Saranjam-

Rajkot, Saurastra Rachnatmak Samiti, Rajkot,

Udyog Bharti-Gondal or any other Govt.

approved organization only.

TOTAL - 5 ( SCHEDULE B - 5 )

SCHEDULE B - 6 : Supply, installation and commissioning of CCTV camera surveiliance system

Sr Description of work/Supply Unit Total Rate Amount

88 Supply of IP Bullet Camera (2MP) with No 5.00 8395.35

bracket & mounting accessories, as per

technical specification and tender terms and

89 Supply of IP PTZ Camera (2MP) with bracket No 1.00 68488.78

& mounting accessories, as per technical

specification and tender terms and

90 a) Supply of (i) Network Video Recorder (16 No 1.00 48898.95

Ch) in built 12 TB SURVEILLANCE HDD , as per

technical specification and tender terms and

91 a) Supply of POE SWITCH 8 Port with 02 nos No 1.00 34198.51

SFP port with 02 SFP module, as per technical

specification and tender terms and condition.

92 Supply of 32" LED Monitor With Wall Mount No 1.00 33152.87

Bracket, as per technical specification and

tender terms and condition

93 Supply of 1 KVA UPS, as per technical No 1.00 24258.40

specification and tender terms and condition.

94 Supply of Powder coated 9 U RACK, as per No 1.00 10874.84

technical specification and tender terms and

95 Supply of 4 Pair, CAT-6, Armoured cable, as MTR 400.00 80.66

per technical specification and tender terms

96 Supply of armored 4 core, 2.5 sq.mm with MTR 150.00 96.80

standard copper conductors power cable, as

per technical specification and tender terms

97 Supply of Standard ISI marked weather proof No 6.00 529.37

Junction box, as per technical specification

and tender terms and condition

98 Supply of 9 mtr Long GI Tubular Pole, as per No 1.00 36289.79

technical specification and tender terms and

99 Laying of 4- Pair CAT-6 armour cable and RMTR 1250.00 14.12

Power Cable in PVC / HDPE pipe with all

necessary accessories as per technical

specification and tender terms and condition.

100 Laying of 6 core Armored Fiber optical cable RMTR 550.00 14.12

and Power Cable in PVC / HDPE pipe with all

necessary accessories as per technical

specification and tender terms and condition.

101 Digging suitable width up to 450 mm and RMTR 300.00 148.22

back filling in any type of soil for laying of

surveillance system cable.

102 Installation and commissioning charges for Job 1.00 3690.49

CCTV surveillance system including providing

& Mounting Stand for LED and brackets for IP

Bullet/PTZ camera, Patch cord, LIU, power

adopter, HDMI cable, connectors, required

splicing of cable etc. as per tender terms and

TOTAL - 6( SCHEDULE B - 6 )

SUB - TOTAL - 1 ( SCHEDULE B - 1 )

SUB - TOTAL - 2 ( SCHEDULE B - 2 )

SUB - TOTAL - 3 ( SCHEDULE B - 3 )

SUB - TOTAL - 4 ( SCHEDULE B - 4 )

SUB - TOTAL - 5 ( SCHEDULE B - 5 )

SUB - TOTAL - 6 ( SCHEDULE B - 6 )

TOTAL ESTIMATED COST OF ERECTION

Add; Welfare Cess @1%