REPAIR TO MISC WOODEN FURNITURE AT ALHILAL MIL STN

Amount

Bed plywood Top (FD-246, FD-1102, FD-247 & FD-21) Renewal of following old unserviceable parts of Bed plywood Top by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable long rails made out of sheesham wood, made to shape as per drawings after taking out old broken long rails complete all as specified and directed by Enge-in-charge.

Renewal of unservicable stiffners of sheesham wood, duly wroughted as per drawings after taking out old broken/ cracked stiffeners care fully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable head rest made of sheesham wood duly covered with plywood 4.0 mm thick one side teak faced all as per drawing after taking out old broken/ cracked head rest carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable foot rest made of sheesham wood duly covered with plywood 4.0mm thick one side teak faced aal as per drawing after taking out old broken/ cracked foot rest carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable bed plywood top 12mm thick (07 Ply) BWR, commercial type of size 1800x900mm, fixed with screws and three stiffeners after taking out the unserviceable plywood top complete all as specified and directed by Engr-in-charge.

Polishing to unservicable bed new or old exposed to view with french polish after filling the holes/ cracks with putty, making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Bin Linen Multipurpose (FD/E6/MAP/09) Renewal of following old unserviceable parts of Bin Linen Multipurpose by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable top of Bin Linen Multipurpose, made of MDF board 18mm thick with plastic laminated sheet 1mm thick on one side approx size of top 1200x450mm complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable drawer made out of MDF board 18mm thick exterior grade with laminated sheet 1mm thick on front of drawer (on one side only) complete all as specified and directed by Enge-in-charge.

Renewal of unservicable back ply of Bin Linen Multipurpose made out of ply wood 6mm thick (exterior grade) both side commercial complete all as specified and directed by Enge-in-charge.

Renewal of unservicable complete set of shutter set made out of MDF board 18mm thick, exterior grade with plastic laminated sheet 1mm thick on top only. Shutters to be fixed with mild steel chromium plated continuous piano hinges with steel screws of required size and quantity complete all as specified and directed by Engr-in-charge.

Renewal of unservicable shelf cabinet made out of 18mm thick MDF board (exterior grade) complete all as specified and directed by Enge-in-charge.

Renewal of unservicable side of Bin Linen Multipurpose made out of 18 mm thick MDF board (exterior grade) complete all as specified and directed by Enge-in-charge.

Renewal of unservicable long bottom rail made out of 1st class hard wood sheesham, wrought complete all as specified and directed by Enge-in-charge.

Chair Dining Cushioned (FD/MAP-11/04) Renewal of following old unserviceable parts of Chair Dining Cushioned by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front legs made out of sheesham wood, made to shape duly wroughted all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable rear legs made out of sheesham wood, made to shape duly wroughted all as per drg after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable side, front and back rails made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully, complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable bottom stiffners made out sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffener carefully, complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable back lower stiffner in rear leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffener carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable cushion seat of size all as per drawing, 32 density covered with valvet cloth (AS approved by Engr-in-Charge) duly stitched (Cost of valvet cloth should not be less than Rs 200 per metre) complete all as per drawing and directed by Engr-in-Charge. Make of cushion shall be : Sleepwell/ feather foam.

Polishing to chair new or old with French polish after filling the holes, cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina to the surface direct to vision, complete all as specified and directed by Engr-in-Chrge.

Chair Dining CB/ Chair Dining JCOs/ Ors (FD-279, FD-1105 & FD-16, FD/ E6/ MAP/ 05 Renewal of following old unserviceable parts of Chair Dining CB/ Chair Dining JCOs/ Ors by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front legs made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable rear leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable side front and back rails made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable bottom stiffners made out sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffener carefully complete all as specified and directed by Eng-in-Charge.

Renewal of unservicable back top stiffner in rear leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffener carefully complete all as specified and directed by Eng-in-Charge.

Complete removal of seat with plastic cane of 2mm wide half round and perimeter canning with 3mm wide half round in Godrej pattern complete all as specified and directed by Eng-in-Charge.

S & F of PVC seat of chair dining size all as per drg complete all as specified and directed by Eng-in-Charge.

Polishing to chair new or old with french polish after filling the holes, cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina to the surface direct to vision complete all as specified and directed by Engr-in-Chrge.

Chair writing FD-20,250,1107, 271 & 280 Renewal of following old unserviceable parts of chair writing by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front legs made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable rear legs made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable side, front and back rails made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable arms for chair writing made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked arms carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable bottom stiffners in rear leg made out of sheesham wood, made to shape, wrought all as per drg after taking out old broken/ cracked stiffeners carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable back top stiffners in rear leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffeners carefully complete all as specified and directed by Engr-in-charge.

Recanning of complete seat with plastic cane of 2mm wide half round and perimeter canning with 3mm wide hald round of make premium in Godrej pattern complete all as specified and directed by Engr-in-charge.

Polishing to chair new or old with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Chair Easy (FD-229, FD-1108 & FD-17) Renewal of following old unserviceable parts of chair easy by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable front leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable rear leg made out of sheesham wood made to shape duly wroughted all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.cted.

Renewal of unservicable side, fornt and back rails made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully,complete all as specified and directed by Engr-in-charge.

Renewal of unservicable back top stiffners in near leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked stiffners carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable arms for chair writing made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked arms carefully complete all as specified and directed by Engr-in-charge.

Recanning of complete seat with plastic cane of 2mm wide half round and perimeter canning with 3mm wide hald round of make premium in Godrej pattern complete all as specified and directed by Engr-in-charge.

Polishing to chair new or old with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

Charpoy IP hard top (MAP) (FD/ MAP/ II/01) Renewal of following old unserviceable parts of CHARPOY by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

Renewal of plywood top by providing 12 mm thick, 7ply grade BWR Type BB, ISI marked conforming to IS-303, commercial face plywood having size as per drawing fixed with 8mm dia round headed countor shunk bolts, 65mm long with nuts and washers including making/ drilling holes in the frame of GI pipe, 3 No's each on long rail and 2 No's each on short rail of each charpoy complete all as shown on drawings and as directed. Make:- kiptly/ National.

Welding of broken joints with gas welding/ rivetting/ nut, bolts & washer and denting of all irregular shapes at all side of charpoy, making correct shape and size and applying one coat of OG/ black/ white/ grey synthetic enamelled paints of approved quality by spray gun on steel surfaces after preparing the steel surfaces including smoothing the whole surface with emery paper, complete all as specified and directed by Engr-in-charge.

SIDE BOARD (FD-241) Renewal of following old unserviceable parts of SIDE BOARD by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable MDF board 18mm thick with plastic laminated sheet 1mm thick on one side approx size of top 1200x455mm as in top of side board complete all as specified and directed by Engr-in-Charge.

Renewal of unservicable complete drawer made out of board 18mm thick, exterior grade with 1 mm thick laminated sheet on front of drawer (on one side only) complete all as shown on drawings and as directed by Engr-in-Charge.

Renewal of unservicable back made out of ply wood 6mm thick (exterior grade) both side commercial as in back of side board complete all as shown on drawings and as directed by Engr-in-Charge.

Renewal of unservicable shutters (complete set) made out of MDF board 18mm thick, exterior grade with plastic laminated sheet 1mm thick on top only. Shutters to be fixed with mild steel chromium plated continuous piano hinges with steel screws of required size and no's all as shown on drawings and as directed.

Renewal of unservicable shelf cabinet made out of 18mm thick MDF board, exterior grade all as shown on drawings and as directed.

Renewal of unservicable side made out of 18 mm thick MDF board, exterior grade all as shown on drawings and as directed.

Renewal of unservicable bottom plank of side board all as shown on drawings and as directed.

Renewal of unservicable front leg made out of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Polishing of side board complete with french polish on exposed to view after preparation the surface with emery paper and putty complete all as specified and directed by Engr-in-Charge.

SOFA SET FIVE SEATER (FD-1113,281,258 & FD/MAP-II/02) Renewal of following old unserviceable parts of sofa set five seater long pease by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of broken/damaged leg of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of broken/damaged long rail of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of broken/damaged siffner suppport of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of broken/damaged handle / arm rest of sofa made of 1st class hard wood (teak) made to shape as per drawing and fixed in position with other member by fevicol and bamboo pins including two coats of polishing to replaced part wooden to match with existing part complete all as shown on drawing and as directed.

Renewal of unservicable cushion foam size 21''x22''x100mm thick 32 density covered with upholstery cloth (AS approved by Engr-in-Charge) duly stitched complete all as per drawing and as directed by Engr-in-Charge. Make of cushion shall be : Sleepwell/ Feather foam.

Polishing the table with french polish after filling the holes, crack with putty and making the surface smooth with emery paper and applying raw/ burnt saina to the directs visions complete all as specified and directed by Engr-in – Charge.

Table 900x600x760mm with /without drawer (FD-284,253,254 & FD-55) Renewal of following old unserviceable parts of Table 900x600x760mm without drawer by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable leg made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rail made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rails made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable drawer of table made out of 19 mm thick pre-laminated particle board, exterial grade all as per drawings complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board size 900x600x19mm thick (OST) made to shape with teak wood edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes/ cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface on direct vision complete all as specified and directed by Engr-in-charge.

Table Writing (FD-275,FD-1116 & FD-33) Renewal of following old unserviceable parts of Table Writing by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood made to shape, wrought all as per drawings after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top long rails made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board one side teak face size 1200x600x19mm thick made to shape with teak edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge.

Renewal of unservicable drawers all as shown on drawings and as directed.

Renewal of unservicable shutters all as shown on drawings and as directed.

Renewal of unservicable lock all as shown on drawings and as directed.

Renewal of unservicable knob all as shown on drawings and as directed.

Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface on direct to vision complete all as specified and directed by Engr-in-charge.

Table Centre (FD-274 & FD-29) Renewal of following old unserviceable parts of Table Centre by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable leg made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board size 900x450x19mm thick (OST) made to shape with teak wood edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Table Peg (FD-236,FD-1114 & FD-277) Renewal of following old unserviceable parts of Table peg by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board, exterior grade, one side teak face of size 450x300x19mm thick made to shape duly teak wood edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.

Teapoy Wooden (FD-278) Renewal of following old unserviceable parts of Teapoy Wooden by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable leg made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rail made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable Teapoy top made out of pre-laminated particle board size 600x450x19mm thick (OST) made to shape with teak edging 4mm thick all round the top as per drawing after taking out old broken/ cracked top carefully complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.

Table Dining 6 pers (FD-272, FD-1115) Renewal of following old unserviceable parts of Table Dining 6 pers by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable top made out of pre-laminated particle board size 1500x900x19mm thick (OST), made to shape with teak edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.

Polishing the table with french polish after filling the holes, cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.

Trestle Store room Wooden (FD-86) Renewal of following old unserviceable parts of Trestle store room wooden by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable inter connected long rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable long rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Renewal of unservicable short rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.

Painting the Trestel with Black paint after filling the holes, cracks with putty and making the surface smooth with emery paper complete all as specified and directed by Engr-in-charge.

Locker bed side Wooden (FD-54 & 222) Renewal of following old unserviceable parts of locker bed side by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable shutter made with 19 mm thick prelaminated particle board exterior grade along with hinges, bow handels hasp & staple complete all as specified in drawing and as directed by Engr-in – Charge.

Renewal of unservicable side, certre portion & shelves of locker bed including hanging rod , wooden bracket with hanging rod with 19 mm block board one side teak faced complete all as specified in drawing and as directed by Engr-in – Charge.

Renewal of unservicable top and bottom portion of locker bed side with 19 mm block board one side teak faced complete all as specified in drawing and as directed by Engr-in – Charge.

Polishing the locker bed side with french polish after filling the holes, crack with putty and making the surface smooth with emery paper and applying raw/ burnt saina to the directs visions complete all as specified and directed by Engr-in – Charge.

Table dining (120 x 90 CMs) (FD/ E6/ MAP/ 10) Renewal of following old unserviceable parts of Table dining by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in – Charge.

Renewal of unservicable long rails made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in – Charge.

Renewal of unservicable short rails made of sheesham wood made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in – Charge.

Renewal of unservicable top made of pre-laminated particle board size 1200 x 900 x 19 mm thick, one side teak face with teak wood edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-Charge.

Polishing the table with french polish after filling the holes, crack with putty and making the surface smooth with emery paper and applying raw/ burnt saina to the directs visions complete all as specified and directed by Engr-in – Charge.

Table dressing ladies with mirror/ with stool ( FD-25,FD/E6/MAP-II/07) Renewal of following old unserviceable parts of Table dressing ladies with mirror / with stool by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Renewal of unservicable mirror of size 1220mmX388mm, 5 mm thick electro copper poated totally free from distortion fixed on and including teak wood frame of size 25mmX20mm allround and 4 mm thick BWR grade (3 ply), commercial plywood in the back. Mirror shell be of polished sheet glass of make :- Atul /Modiguard as approved. The fixing and finishing shall be done in accordance with standard workmanship and drg and directed.

Renewal of unservicable bootom base with legs made to shape and size of table dressing ladies all as mentionrd in drawings with provision for finger grip. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Renewal of unservicable top of table made of prelaminated particle board exterior grade with one side teak faced and other white face of size 19mm thick including 4mm thick teak wood edging all around all as per drawings. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

Polishing to table dresing new or old of french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.

Renewal of unservicable leg frame including four leg with 1st class H/W teak of size reqd as per drawings. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

M/S MALHI CONSTRUCTIONS

M/s Sheetal Associates