WBPHE/ EE/PMD/NIeT- 12 OF 2019-2020/sl3

Amount

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof (for pole base)

Brick work with 1st class bricks in cement mortar (4:1) In superstructure, ground floor (for pole base)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:6 cement mortar 20 mm thick plaster (for pole base)

Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) (for 47 nos pole base)

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: One Coats (for 47 nos pole base)

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) Normal Acrylic Emulsion (for 47 nos pole base)

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole One coat of red lead/Zinc chromate primin

1st coat of synthetic enamel paint over the primer

2nd coat of synthetic enamel paint over the 1st coat

Fault finding through out the cable line between 47 nos lighting pole to pole and intake access bridge by excavation of earth and fault finding service lines through pole as per direction of EIC by engaging expart electrician and helper.

Supply and fitting fixing at different places of WTP street approach street and intake access bridge , luminaries (model: BRP410 LED 72 W ,Make Philips/havells) complete with all accessories for easily fixing on pole as per direction of EIC. (after defixing existing SV lighting fixture)

Drawing of service line of 1.1 KV ,1.5sqmm 3core copper flexible cable IS 694 with necessary inter connection as per direction of EIC (for laying joint box to fixture ) make :Finolex/havells/PHE approved

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction 25mm dia 3mm polythine pipe

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3x1.5 sqmm

Supply delivery of 16sqmm 4core AL AR 1.1 KV cable as per IS 7098 as per direction of EIC make :Finolex/havells/PHE approved

S/F Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials (Brand approved by EIC) 4 core 10-16 sqmm cable

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supply delivery at site and installation of Glow sign board , having Poly carbonate sheet 2.5 mm. thick with reserve cutting vinyle sticker at back side. (size-10'x3’6”x6”) having back ,top ,right ,left and bottom side thick 22 swg GI sheet cover, ms nut bolts washer including 2 coat synthetic enameled paint and primer as per direction of EIC. ( Words to be written on sign board as per direction of EIC) Supply delivery of 8 nos. 20 watt LED tube batten make Philips for inside of glow sign board as pre direction of EIC with all wire/cable interconnection as per direction of EIC. For Installation of above supplied sign board by MS fabricated structure with MS angle,40 mm x 40 mm 5 mm channel, hook etc for holding glow sign board to wall rates are including all complete, all incidental charges all channel, Brick piller,plaster etc painting complete with synthetic enamel painting after proper priming as per direction of EIC. (for Lakshmanpur WTP under R N P water supply project)

Supply delivery at site and installation of Glow sign board , having Poly carbonate sheet 2.5 mm. thick with reserve cutting vinyle sticker at back side. (size-5’x3’6”x6”) having back ,top ,right ,left and bottom side thick 22 swg GI sheet cover, ms nut bolts washer including 2 coat synthetic enameled paint and primer as per direction of EIC. ( Words to be written on sign board as per direction of EIC) Supply delivery of 4 nos. 20 watt LED tube batten make Philips for inside of glow sign board as pre direction of EIC with all wire/cable interconnection as per direction of EIC. For Installation of above supplied sign board by MS fabricated structure with MS angle,40 mm x 40 mm 5 mm channel, hook etc for holding glow sign board to wall rates are including all complete, all incidental charges all channel, Brick piller,plaster etc painting complete with synthetic enamel painting after proper priming as per direction of EIC. (for Administrative building, Chemical house, Sub station, Pump house, Garpanchakot Inspection Bungalow, and approach road side of RNP water supply project)

Dismantling the damaged flex board- 4nos from roof top of 1st floore Bungalow and multipurpose hall by using rope pulley arrangement safely as per direction of EIC and loading ,carrying and unloading at repairing shop.

Repairing the damaged flex board supply fixing of Poly carbonate sheet 2.5 mm. thick with reserve cutting vinyle sticker anf supply and fixing of 4nos 20 watt LED batten type tube with all inter electrical connection and complete painting and loading ,carrying and unloading at site ,placing and install top of bungalow and multipurpose hall as per direction of EIC.

Drawing of service line of 1.1 KV ,1.5sqmm 3core copper flexible cable IS 694 with necessary inter connection as per direction of EIC (from glow sign board to main switch) make :Finolex/havells/PHE approved

At intake access bridge Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. From steel structure.

At intake access bridge Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

At intake access bridge Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : With super gloss (hi-gloss) - Two coats (with any shade except white)

Hire and labour charges for providing suitable scafolding(bhara/Ladder) or any conventional divice, using safety cage, rope, belt, clamp etc and removing the same as per direction of EIC

Add GST @12%

PROGRESSIVE ENGINEERS CO OPERATIVE SOCIETY LIMITED

EASTERN INDIA SALES AND SERVICE