Loading…
Loading…
Tender Value
₹76.8 L
EMD Value
₹77,000
Closing Date
25 Jun 2026, 6:00 pmClosed
Executive Engineer, Panchayat (R&B) Division, Valsad
ICDS 2025-26 Construction of Aganwadi Building at Various Village of Umargam Taluka Dist Valsad ( Pk-1 Total -6 Aganwadi) 1). Borlai Gaanda Faliya 2) Karambela Mahyavanshi 3) Daheri Katvad Faliya 4) Zaroli Chipvad 5) Karajgam Taad Faliya 6) Sanjan Raywadi
314725
07 of 2026-27
Open
Civil Works - Buildings
Works
Valsad
4 documents required · 4 mandatory
₹2,400
Executive Engineer, Panchayat (R&B) Division, Valsad
₹77,000
16 Jun 2026
16 Jun 2026
16 Jun 2026
25 Jun 2026
16 Jun 2026
Name of Work : ICDS 2025-26 Construction of Anganwadi Building at Various Village of
Umargam Taluka Dist Valsad ( Pk-1 Total -6 Anganwadi)
BILL OF QUANTITIES
Item No. Item of work Quantity Unit Rate In figures Amount
Excavation for foundation upto 1.5 m
depth including sorting out and
stacking of useful materials and
1 disposing off the excavated stuff upto 93.60 Cu.Mt. 149.830
50 Meter lead. (B) Dense or Hard Soil '
( I ) 0 To 1.5 mt. Depth
Excavation for foundation for depth
from 1.5 m to 3.0 m including sorting
out and stacking of useful materials
2 and disposing off the excavated stuff 46.80 Cu.Mt. 162.560
upto 50 Meter lead.(B) Dense and
Hard Soil ' ( II ) 1.5 To 3.0 MT Depth
Filling available excavated earth
(Including rock in trenches plinth, sides
of foundations etc. in layers not
3 exceeding 20 cm. in depth 57.00 Cu.Mt. 130.390
consolidating each deposited layer by
ramming and watering)
Providing & filling in plinth with murrum
or yellow soil or selected soil in layers
of 20 cm. Thickness. Incl. watering,
ramming & consolidation etc. complete.
'Filling in plinth with sand under
floors including watering ramming,
5 consolidating and dressing 27.00 Cu.Mt. 460.190
Providing and laying cement concrete
1:3:6 (1- Cement : 3- Coarse sand : 6-
graded stone aggregates 20 mm
6 nominal size) and curing complete 44.16 Cu.Mt. 3313.290
including cost of formwork in (A) PCC
Providing and laying Ordinary cement
concrete M.250 and curing complete
inculding the cost of formwork but
Excluding the cost of reinforcement for
reinforced concrete work in
foundation, footings base of column
and mass concrete. (A) Footing
Providing and laying Ordinary cement
concrete M.250 and curing complete
inculding the cost of formwork but
Excluding the cost of reinforcement for
reinforced concrete work in All Types
of Column D) Column, Pillers, posts
and struts , upto Plinth
Providing and laying Ordinary cement
concrete M.200 and curing complete
inculding the cost of formwork but
9 Excluding the cost of reinforcement for 13.50 Cu.Mt. 8542.580
reinforced concrete work in All Types
of Column D) Column, Pillers, posts
and struts, upto Ground Floor
Providing and laying Ordinary cement
concrete M.200 and curing complete
inculding the cost of formwork but
Excluding the cost of reinforcement for
reinforced concrete work in All Types
of Column D) Column, Pillers, posts
and struts, upto First Floor
Providing and laying Ordinary cement
concrete M.250 and curing complete
inculding the cost of formwork but
Excluding the cost of the cost of
reinforcement for reinforced concrete
work in Beams. (E) Beam, upto Plinth
Providing and laying Ordinary cement
concrete M.200 and curing complete
inculding the cost of formwork but
12 Excluding the cost of reinforcement for 24.00 Cu.Mt. 6599.340
reinforced concrete work in All Types
of Beams,(E) Beam, Ground Floor
Providing and laying Ordinary cement
concrete M.200 and curing complete
inculding the cost of formwork but
Excluding the cost of reinforcement for
reinforced concrete work in All Types
of Slab,All Thickness (C) Slab upto
Plinth and Ground Floor
Providing and laying Ordinary cement
concrete M.200 and curing complete
inculding the cost of formwork but
14 Excluding the cost of reinforcement for 1.62 Sq.Mt. 6788.210
reinforced concrete work in Chajja.
Upto Ground Floor
Providing TMT Bar FE 500D
reinforcement for R.C.C. work
including bending, binding and placing
in position complete upto floor two
level,Ground Floor, First Floor
Second Floor, Third Floor, Terrace
Floor (all floor).
Brick work using common brunt clay
building bricks having crushing
strength not less than 35 kg/sqcm. in
16 superstructure above plinth level upto 199.38 Cu.Mt. 4295.990
floor two level in cement mortar 1:6 (1
cement :6 fine sand) etc.comp. (B)
Conventional Ground Floor
Brick work using common brunt clay
building bricks having crushing
strength not less than 35 kg/sqcm. in
17 superstructure above plinth level upto 21.30 Cu.Mt. 4336.180
floor two level in cement mortar 1:6 (1
cement :6 fine sand) etc.comp. (B)
Conventional First Floor
'Half brick masonry in common brunt
clay building bricks having crushing
strength not less than 35 Kg/Sq.Cm. in
18 Cement mortar 1:3 (1- Cement : 3 - 68.04 Sq.Mt. 716.370
coarse sand ) in (B) Conventional
'Providing 15mm thick cement plaster
in single coat on Rough (Similar)side
of single or Full/half brick walls for
19 interior plastering upto floor two level 800.58 Sq.Mt. 171.800
and finished even and smooth in (ii)
Cement mortar 1:3 (1-cement :3-sand)
'Providing & laying10 mm. thick
cement plaster in single coat on fair
side of ceilings for interior plastering
upto floor two level and finishing with
20 smooth mala plaster.(i) Cement mortar 274.98 Sq.Mt. 153.670
1:3 (1 cement : 3 sand) Ground Floor
'20mm thick sand faced cement plaster
on walls upto height 10 metres above
ground level consisting of 12mm thick
backing coat of C.M. 1:3 (1-cement : 3-
21 sand) and 8mm thick finishing coat of 1046.94 Sq.Mt. 300.660
C.M. 1:1 (1-cement : 1-sand) etc.
Providing throating or plaster drip and
22 moulding to R.C.C. Chhajja. 36.00 Rmt 42.170
Providing and laying polished Granite
Slab 18mm thick in Flooring laid 20mm
thick Cement Mortar 1:4 (1-Cement : 4-
Coarse Sand) and jointed with Grey
Cement Slurry including full molded
round front edges , rubbing and
polishing etc. complete.
Providing and laying polished Granite
Slab 18mm thick in Risers of steps
Dedo, window sill, jembs and pillars
laid 10 mm thick Cement Mortar 1:4 (1-
24 Cement : 4-Coarse Sand) and jointed 88.14 Sq.Mt. 2486.620
with Grey Cement Slurry including full
molded round edges , rubbing and
polishing etc. complete.
Providing and laying Vitrified tiles, 24''
x 24'' in flooring treads of steps and
landing laid on a bed of 12mm thick
cement mortar 1:3 (1-cement : 3-
coarse sand ) finishing with flush 332.04 Sq.Mt. 1073.130
pointing in white cement.Soluble Salt
PVT. Tiles in All Rooms.
Providing and laying Vitrified tiles, 24''
x 24'' in skrting risers of steps and
dedo on 10mm thick cement plaster
26 1:3 (1-cement : 3-coarse sand) and 207.24 Sq.Mt. 1141.450
jointed with white cement slurry
Soluble Salt PVT. Tiles in All Rooms.
Providing and fixing flush door both
sides laminated andshutter fabricated
from 35 mm thick solid core malemine
faced three layered pre laminated flat
pressed wood based exterior grade
bonded BWP/BWR synthetic resin
having stamped IS 12823 grade I type
27 II including Stainless steel decorative 25.80 Sq.Mt. 3122.920
type designs fixtures / fastening 2Nos.
Handles, 2Nos. Aldropes, towerbolt
etc.including I.T.W. triangular batten
patti of size 30m.m.x30m.m.etc. as per
architectural detailed drawing and as
directed by engineer in charge..
Providing and fixing FRP frame size
125x65 mm and 35mm thick FRP
shutter having extra reinforcement on
sides & edges in polish finish. The
core of the shutter & frame is to be
filed up with injected polyurethene
foam done in situ alongwith embedded
wooden pieces for stiffening & also
28 taking hinges & fintures. The whole 9.84 Sq.Mt. 2615.040
FRP frame & shutter is to be water
proof weather proof, termite proof &
resistance to mild acid/alkali. Rates
are to be inclusive of S.S hinges with
necessary screws & alluminium S.S
fixtures & fastenings & fastener sleeve.
Providing and fixing window having
extruded aluminum Colour anodized
section frame main outer size 63.50 x
Rmt, horizontal two track with
Mosquitoe Net member size 61.85 mm
Kg/mt, vertical member of size
0.659 Kg/mt with sliding shutters of
29 horizontal member size 40mm x 18mm 39.00 Sq.Mt. 3477.630
x 1.29mm @ wt.of 0.456Kg/mt, vertical
member of size 40mm x 18mm x
0.457 Kg/mt with 5 mm thick
transparent bronze colour tinted float
glass with powder coated aluminum
fittings and fixtures and transparent
silicon sealant glass fixing to frame as
per details etc complete for window.
'Providing and fixing standared
extruded of alluminium section of size
Kg/mt) with colour anodized alluminium
frame for ventilation with 5 mm thick
frosted glass as details etc complete
for Ventilation
Providing and fixing M.S. grill of
required pattern of windows etc. with
M.S.. flats at required spacing and
frame alround square or round headed
31 bolts and nuts or by screws.including 3232.08 Kg 111.610
applying a priming coat of red lead
paint and two coats of oil painting
Applying two coats of Birla (white
cement based) or (acrylic lapy- putty)
or equivalent & two coats of primer of
approved brand and manufacture on
new wall surface to give an even
shade including thoroughly brushing
the surface free from mortar dropping
and other foreign matter and sand
32 papered smooth. with Wall painting 801.00 Sq.Mt. 161.460
(two coats) with plastic emulsion paint
of approved brand and manufacture
on undecorated wall surface to give an
even shade including throughly
brushing the surface free from mortar
droppings and other foreign matter and
sand papered smooth.
Applying two coats of Birla (white
cement based) or (acrylic lapy- putty)
or equivalent & two coats of primer of
approved brand and manufacture on
new Ceiling surface to give an even
shade including thoroughly brushing
the surface free from mortar dropping
and other foreign matter and sand
33 papered smooth. Ceiling painting (two 275.40 Sq.Mt. 166.870
coats) with plastic emulsion paint of
approved brand and manufacture on
undecorated Ceiling surface to give an
even shade including throughly
brushing the surface free from mortar
droppings and other foreign matter and
sand papered smooth.
Finishing wall with weather proof
exterior emulsion paint on wall surface
(two coats) to give an required shape
even shade after thoroughly brushing
the surface to remove all dirt, and
34 remains of loose powdered 1046.94 Sq.Mt. 160.590
materials.etc complete. Priming: Apply
a liberal coat of exterior acrylic primer
and allow it to dry for 4-5 hours.
'Providing and laying integral cement
based water proofing treatment
including preparation of surface as
required for treatment of roofs,
balconies, terraces etc. consisting of
following operations. (a) Applying and
grouting a slurry coat of neat cement u
',brick bats is finally covered by
jointless cement plaster 20mm th. in
C.M. 1:4 added with special water
proofing compound confirming to
IS:2645 & top smooth finished with
trowel with false chequered marking of
300 mm.size.The treatment is carried
Providing and constructing sandwitch
type Granite stone top & bottom Kota
Stone platform 0.6 mt. wide & 0.75 mt.
height, including front granite stone
patti and top granite skirting pati,
36 vertical partitions of Kota stone and 17.40 Sq.Mt. 8290.080
Edge vertical granite stone on Both
sides with cement Mortar(1:1) as
required comp as per drawings and
Instruction of Engineer incharge.
Providing and fixing wash down water
closet (European type, W.C. Pan) with
integral P or S trap including jointing
the trap with soil pipe in Cement
Mortar 1:1 (1-Cement : 1-fine sand)
(Seal and cover to be measured and
paid for separately)(A) vitreous China
Pattern :(i) in white colour, Providing
and fixing 12.5 Litres low level flushing
cistern with a pair, of C.I. or Mild
brackets, complete with fittings such
as lead valve less syphon, 15mm
nom.nal size brass ball valve with
37 polythene float, C.P brass handle 6.00 No. 4248.450
unions and couplings for connections,
with inlet, outlet and overflow pipes,
40mm dia.porcelain enamelled flush
bend including cutting holes in walls
and making good the same connecting
the flush bend with cistern and closet
(overflow pipe to be measured and
paid for separately)(A) Vitreous China
(I) In white colour, Providing and fixing
plastic seat and cover for wash down
water closer with C.P. brass hinges
and rubber buffers. (B) Black plastic
seal and cover, With Jet spray heavy
Providing and fixing washbasin with
single hole for pillar tap with C.I. or
M.S. brackets painted white including
sutting holes and making good the
38 Providing and fixing C.P. brass waste 12.00 No. 2463.460
for washbasin or sink. (A)
32mmdia.,Providing and fixing pillar
tap, stop tap, bottle trap etc.
Providing and fixing PVC SWR Nahni
trap IS 14735 for drain - 100 mm
diameter with jali of the following
39 nominal diameter of self cleansing 24.00 No. 571.080
design with C.I scread down or hinged
grating including the cost of cutting
and making good the walls.
Providing and fixing screw down bib
taps of following size.(A) Brass screw
40 down bib tap polished bright. (i) 42.00 No. 186.830
Providing & fixing of overhead shower
80 mm (3”) dia with 3 flow with
Overhead Shower arm 200 mm with
41 wall flange complete (i) 15mm 6.00 No. 2030.100
dia.,Providing and fixing brass screw
down stop tap.(A) 15mm dia.
Providing and fixing Kitchen sink with
C.I. or M.S. brackets, painted white
including cutting holes in walls and
making good the same (C) S.S. &
size with Providing and fixing C.P.
brass waste for washbasin or sink,
piller tap, stop tap, bottle trap etc.
'Providing and fixing Gun metal check
or non-return fullway wheel valve.
Providing and fixing Gun metal check
44 or non-return fullway wheel valve. 12.00 No. 663.430
'Providing and fixing chromium plated
brass half turn flush cock of approved
45 quality including fixing in pipe line etc. 6.00 No. 263.770
complete.(ii) 25mm dia.
Providing and fixing ball cock of
approved. quality as directed.(A)
Copper Metal (A) 25mm. dia.
Providing laying and jointing in true line
and level 15mm dia. U.P.V.C. Pipe (
SCH- 40) for cold water including
fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall
with the help of clamp at every two
47 metre C/C or shall be concealed as 36.00 Rmt 72.650
directed including necessary fittings
etc. including testing of pipe and joints
and fixing the same with adhesive
solvent, including cost of all materials.
Providing laying and jointing in true line
and level 25mm dia. U.P.V.C. Pipe (
SCH- 40) for cold water including
fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall
with the help of clamp at every two
48 metre C/C or shall be concealed as 72.00 Rmt 91.840
directed including necessary fittings
etc. including testing of pipe and joints
and fixing the same with adhesive
solvent, including cost of all materials.
Providing laying and jointing in true line
and level 50mm dia. U.P.V.C. Pipe (
SCH- 40) for cold water including
fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall
with the help of clamp at every two
49 metre C/C or shall be concealed as 120.00 Rmt 195.670
directed including necessary fittings
etc. including testing of pipe and joints
and fixing the same with adhesive
solvent, including cost of all materials.
Providing, laying and jointing in true
line and level 110 diametre U.P.V.C
(Type B) conforming to IS 13592-1992
with one end plain and other end
socketed with rubber ring, & fittings
conforming to ISI 14735-1999 of
approved make for drainage system
pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe
shall be fixed on wall using of PVC
50 clamp of the size 110 mm diametre x 72.00 Rmt 836.730
149 mm length x 145 mm heigh at
every 2000 mm center to center or
shall be concealed in walls as directed
including necessary fittings such as
bends, shoes etc. including testing of
pipes and joints and jointed with
adhesive solvent cement including
cost of all materials.
Providing and fixing S.W. gully trap
with C.I. grating brick masonry
chamber and water tight C.I. cover with
frame of 300mm x 300mm size (inside)
with standard weight.(i) Square mouth
traps.(B) 150mm x 100mm size P or R
Constructing Brick masonry road gully
chamber 500mm x 450mm x 600mm
including 500mm x 450mm C.I.
52 horizontal grating wih frame complete. 12.00 No. 2017.190
'Constructing brick masonry chamber
for underground C.I. Inspection
chamber and bends with bricks having
crushing strength not less than
35Kg/Cm2 in C.M. 1:5 C.I. cover with
frame (Light duty) 455mm x 610mm
intenal dimensions total weight of
cover with frame to be not less than
38Kg. (Wt. of cover 23 Kg.) and Wt. of
frame 15Kg. ) (R.C.C. top slabe with
53 1:2:4 mix (1-cement :2- coarse sand :4- 12.00 No. 2932.930
graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside
plaster 15mm thick with cement mortar
1:3 finished smooth with a floating coat
of neat cement on walls and bed
concrete etc. complete.(i) Inside
dimensions 455mmx 610mm and
450mm deep for single pipe line.
'Providing & fixing G.I. Rain water
spout of 50 mm.dia & 30 cm length etc.
Providing and fixing in position cowel
55 went to pipes.(C) 100mm dia 6.00 No. 501.870
'Providing erecting and fixing double
coated PVC. (ISI) water tank of
56 required capacity each with all 3000.00 Ltr 3.950
necessary fittings and connection etc.
complete on terrace.
Providing Sock pit of 5.0 Cum Volume
(internal diameter of 1.50 meter)
including Excavation and filling brick
bats with dry masonary work attop for
45cm height including covering the top
with R.C.C. SLab with One Man hole
including providing vatas in Cement
Motar 1:3 with the finishing curing and
necessary connection with the septic
tank outlet etc complete as directed by
Engineer in charged.
Providing septic tank of inside
dimensions( 2.5 mt. x 2.0 mt.x 1.5 mt.)
as Directed by incharge with brick
masonary of CM 1:6 the foundation
58 floor with 1:5:10 B.B.C.C. finished with 6.00 No. 40419.190
15 mm C.P. in C.M. 1:4 root cover of
R.C.C. slab inclunding connection pipe
from inlet and outlet etc.comp.
Providing of Bala Work for Anganwadi
like Wall paintings on inside and
outside walls upto the Slab height or
lintel height, Measurements - vertical
Scale Paint, Wall arts, Black board,
Drawings of Animal, birds, Vegetables,
59 Nutrition chart,Days-Months, Making 6.00 Job 30300.000
Yojana Logo Board with all the deatils,
writing bruilding name in paint on the
front side, etc complete as per
Annexure (A) & as per Directed by
Engineer in charged.
'Providing, erecting & Fixing Fibre
Fabricted make childern Slide fit for
children age group coming to
Anganwadi and approved by Engineer
60 in charge, in the playground of 6.00 No. 10100.000
approved brand and quality at the site
ad directed by engineer in Charge
Providing, erecting & Fixing Fibre
Fabricted make childern Swing for
children age group coming to
Anganwadi and approved by Engineer
61 in charge, in the playground of 6.00 No. 11110.000
approved brand and quality at the site
ad directed by engineer in Charge
Providing Cello/Nikamal two Seat
polypropelene Plastic Junior Well
finished Study/Play Table with Chairs
62 for Kids from 3-10 Years (Attractive 30.00 No. 3030.000
colours like RED/Yellow/Green) with all
necessary charges and taxes as
Directed by the Engineer in charged.
Supplying & installing of Dry Chemical
Powder type 6 Kg. Capacity fire
63 extinguisher as per I.S. 2171 ISI. Mark 12.00 No. 2525.000
with necessary fittings etc. complete.
Providing and fixing kitchen platform
trolley having three drawers of SS (IS
304) of required size like thali, katleri,
perforated, partition, cupsosar type in
kitchen platform having drawer front
side and backside by using 19mm
thick all proof plywood of ( IS 710 ) 14.46 Sq.Mt. 17281.100
quality all side laminated etc. as
directed. The size of SS (IS 304)
basket of size 4" to 18" for thali, dish,
katleri, perforated, partition, cupsosar
type as directed including necessary
'Providing handles,
Office tablenobs, telescopic
with wooden top
of approved brand Ply base of
appropriate thickness of required
dimensions with base support made
up of Waterproof Ply of approved
65 Brand(ISI make) on site with all 6.00 No. 5555.000
necessary fittings , Fixtures like
handles and adhesives,etc complete
of design directed by Engineer
Providing Chair with armrest with
leather /PVC / Mesh finish and proper
cushion on site with all necessary
66 fittings , Fixtures and adhesives,etc 12.00 No. 4040.000
complete of design directed by
Engineer incharged
Providing and fixing of Polished Kota
Stone / Kadapa for making Horizontal
Shelves on wall using appropriate
adehsive/motar and making
appropriate vertical supports wherever
necessary in brickwork or Kota Stone
67 and and jointed with gray cement slury 18.18 Sq.Mt. 1089.670
mixed with pigment to match the shade
of slab and making the site cleaning as
original with all necessary material and
labour charges etc complete as per
design directed by Engineer incharged
I/We am/are willing to carry out the work at…% above/below percent(Should
be written in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
All works shall be carried out as public works department Handbook and other
specification of Division or as directed.
All the columns in schedule should be filled in ink or ballpen and the total of the
entries in last column should be struck by the contractor under his signature.
Rate quated include clearance of site (Prior commencement of work and at its close)
in all respects and hold good for work under all conditions,site moisture, weather etc.
The Contractor shall exhibit a board with detailed specification and details of work
as directed by the Engineer-In-Charge for which no extra payment shall be made.
The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
GST and Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per
Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in
S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost
of difference of cement consumption have been deducted from the rate of original item at
the rate of input rate mentioned in all the tender.
To be continued on additional sheet,if found necessary.
Deputy Executive Engineer Executive Engineer
Panchayat (R&B) Sub.Division Panchayat (R & B) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
2.GR to be attached with DTP_SBD.pdf
Building-Specification Book.pdf
GR.pdf
SBD- Anganwadi Pk-1.pdf
Schedule B Aganwadi PK-1.pdf
Specification Aganwadi Pk-1.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .