SPL REPAIR OF PUMP HOUSE NO 1,4,5,8,13,16 AND 19 AND PROVN OF 26 KITCHEN SINK AND 26 X CROCKERY/ STEEL VESSEL STAND IN KITCHEN OF JCOS GOVT MD ACCN 4/J/1 (12 QTR), 4/J/2 (12 QTRS) AND 4/J/3 (02 X QTRS) OF CERTAIN MIL UNIT AT BINNAGURI UNDER GE (S) BI

Amount

Taking down of cement plaster on brick (or) concrete wall including racking out joints hakins for key sinebling down with water etc complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement morter 1:4 with water proofing compound finished even and fair complete all as specified.(Note : WPC shall be measured and paid separetely)

M&L for integral Liquid water proofing compound complete all as specified

M&L rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces as in celling finished fair and even without using extra cement complete all as specified.

M & L for preparing new Plastered surfaces of walls and finishing the walls with Acrylic smooth exterior paint of required shade for New work Two or more coats applied over and including priming one coat of exterior primer applied complete all as specified .

M&L preparation of new plaster surface and applying three coats of white wash on ceiling complete all as specified

Preparation of old treated surfaces of ceiling all as directed and applying two coat of white washing complete all as specified.

M & L for complete removal of existing treatment and finishing the walls with two coats Acrylic smooth exterior emulsion paint of required shade for New work over and including priming one coat of exterior primer applied all as per manufacturer's specification and as specified.

M&L for preparing new plastered surfaces of wall and applying two coat of distemper oil emulsion over a coat of primer complete all as specified.

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer including complete removal of existing treatment complete all as specified.

Dimolition of cement concrete of any size, position and any description complete all as specified

M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection,sub-base, pavement etc and finished the surface even and fair complete all as specified.

M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in surface channels and drains etc complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

Dismantling floor hearth or wall tiling and interlocking incl cement mortar bedding or sand and removing the rubbish off the premisescomplete all as specified

M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18Sqm but n. exc. 0.38 Sqm, vertical surfaces, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor complete all as specified.

M&L for brickwork with burnt fly ash old size bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete.

M& L for Glazed coloured ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with 10 mm screed bed 1:4 for laying wall finishes complete all as specified

Dismantling wrought iron or mild steel work of any description as in door, gates etc and similar works complete all as specified.

S&F framed work such as grills,gratings,etc with ends of bars, shouldered and / or riveted.or forged into spikes,framed guard bars barred iron doors ladders.framed balusters walk ways railings framework of watertanks and similar complete all as specified.

Taking down chowkat or frame with door shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified

Taking down chowkat or frame with door shutter (without taking off shutter from the frame) n exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125mm x 60 mm x 1.25mm (thick) complete all as specified

M & L pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete as specified.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gause etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified

S&F Aluminium anodized barrel tower bolts, extruded section 200mm long complete all as specified.

S&F Aluminium anodized handles, D type, 150mm long complete all as specified.

S&F aluminium sliding door bolt 300 mmlong, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

Taking up or down steel tubing and connections,15mm bore including cleaning for serviceable pipe for re-fixing or removal of unserviceable pipe from site of work complete all as specified

All as per item No.33 above but 20mm bore complete all as specified.

S&F tubing,medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified.

All as item No 3 herein before but 20mm bore complete all as specified.

S&F in repair bib taps, fancy type chromium plated with crutch or butterfly hadle screwed down ,screwed for iron pipe or brass ferule of 15mm bore complete all as specified.

S&F in repair stop valve,fancy type chromium plated (medium) screwed down,high pressure with crutch or butterfly handle,screwed both end for ironb pipe or for union of 15mm bore complete all as specified.

S&F in repairs 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified.

S&F in repair 15mm bore PVC connection pipe 450mm long with PTMT nuts at bolt ends complete all as specified.

S&F in replacement rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type multi-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I complete all as specified

S&F 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified

Supply and fix in repair PVC (SWR) pipes 110mm dia,type 'A' conforming to IS, single socketed, in any length with rubber ring joints laid in trenches or floor complete all as specified.

Ditto as per item no 43 above but in wall complete all as specified.

M&L for 110 mm bore PVC (SWR) vent cowl complete all as specified

M&L PVC (SWR) bends with access door of 110mm bore any radius complete all as specified.

S&F of in repair vitreous china squatting pan "Orissa" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap from or back inlet etc including connection to trap and flushing pipe and provision of lime concrete bedding complete all as specified

S&F in repair PVC flushing cistern syphonic action type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe complete.

S&F in repairs vitreous china wash basin 550 x 400mm size white including brackets,CP waste coupling waste pipe,short connection complete all as specified.

S&F waste coupling of PTMT (half of full threaded) complete all as specified

S&F 32 bore Wash hand basin waste pipecomplete all as specified

S/F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat mould plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement Make : Rajshree or equivalent as approved by GE.

S/F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, Make : Rajshree or equivalent as approved

S&F Stainless steel butt hinges medium weight 100mm long for PVC door.

S&F in repairs factory made Z section steel ventilator with top hung shutter incl hinges, steel peg stay, with glazing bars including a shop coat Red Oxide priming including taking out old one , complete all as specified.

Taking down tarfelt incl cement mortar bedding from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified

-----Blank-----

-----Blank-----

-----Blank-----

M & L for finishing the Bituminous surface with aluminium paint @0.15 Ltr/sqm as per manufactures specifications and under strict supervision of manufactuer's technical representative over APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application over bituminous primer @ 0.50 KG/Sqm over the cement plaster incl preparation of surfaces as per manufacturers instruction over screed bed or bedding layer 15 mm thick screed bed or bedding layer in CM (1:4) mixed with WPC as per manufacturer instruction complete all as specified.

S&F in repairs factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete including taking out old one all as specified

S&F in repairs factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete without glazing bars , dovetailed or welded including a shop coat Red Oxide priming including taking out old one complete all as specified.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified.

Supply & fixing in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless and as required framing including taking old one steel staples complete all as specified

M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified.

M&L for preparation of old steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as Specified.

S & F in repairs steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod,hasp and staple and one shop coat of primer,erected in position as indicated, complete: push pull or manual type complete all as specified

Demolition of stome slab and tiles of any desc or thickness in floor or apron etc laid bedded in cement morter

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with M & L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item no 70

Dismantling post or strut any section including taking out embedded portion and making good disturbed ground post embedded embedded in concrete brick and masonry ground complete all as specified

Dismantling barbed wire wire , any type any position complete all as specified

S&F galvanised 2 strand , steel barbred wire (type ‘A’ and designation class 5) 2.24mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossings with mild steel wire, staples or steel pins, etc. as directed(each line wire to be measured) complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removal excess soil to at a distance 50 m and making good surface(soft or loose soil) complete all as specified

M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate)in foundations filling and mass concrete including demoilition od old one complete all as specified.

M&L for RCC type B1 1:1.5:3, M-20 (20mm graded aggregate) as in columns, pillars, piers, post and struts complete all as specified

M& L for Cement concrete in foundations, filling and mass concrete type c-2 1:3:6 using 40 mm graded aggegrate as in pcc band at ground level to hold the bottom of post etc complete all as specified

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as per item No.79 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders complete all as specified.

As per item no 79 bove but 6mm dia round bar as in nibs complete all as specified

M&L for formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffit of foundation and plinth beam and similar work similar or batte for rough finished surfaces of concrete in flat complete all as specified.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, finised rough, square, rectangular section complete all as specified.

M&L in repair for flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165.

-----Blank-----

Supply and fixing of chain link MS galvanaised fencing 4.0 mm dia and 100 mm x100 mm mesh,made up into mattressess or cage including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified.

Excavation in trenches n. exc 1.50 m wide and n. exc 1.50 m in deep for foundation or for main hole etc n. exc 10 sqm on plan and getting out in soft/loose soil all as specified

Returning filling including spreading levelling watering and well ramming in layers n. exc 25 cm in soft /loose soil complete all as specified.

Removing excavated material ( soil) n. exc 50 m depositing where directed at a level n. exc 1.50 m above the starting point all as specified

Dismantling and breaking up 200 mm drain pipe (salt glazed stone ware or reinforced concrete) set in cement mortar alongwith concrete bed of drain pipes as in damaged portion of sewage line and work in foul position complete all as specified

M&L for PCC for concrete bed to drain pipe , 200 mm bore pipe including packing and under hunching against the sides of pipe after they are laid and tested in PCC (1:3:6) type C-2 using 40 mm graded stone aggreagate complete all as specified.

M&L for 200 mm bore grade 'A' SGSW drain pipe laidin trenches and jointed in cement ,mortar (1:1) complete all as specified.

Demolition of reinforced cement concrete of any description and in any position such as precast manhole cover or cover slabs of septic tank etc (reinforcement cut as required to facilitate demolition) complete all as specified

M&L for precast RCC 1:1.5:3 type A-1 using 20mm graded aggregate set in cement mortar 1:4 as in manhole covers including necessary formwork complete all as specified

M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip complete all as specified.

M&L for fine aggregate (sand) spreading and levelling in layer n exc 50mm thick under paver block for cushioning complete all as specified.

M&L for chemically treated machine pressed precast concrete coloured interlocking paver block with Grey cement and no pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade.

M & L for PCC 1:2:4 type B-I ,(using 20 mm graded stone aggregate) as. in footpath coping /benching to sides of foot path fininished fair and even etc complete all as specified and direected.

M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick complete all as specified

S&F Bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified.

S&F of 32 mm bore waste coupling of PTMT (half or full threaded) minimum weight 60gms incl waste pipe complete all as specified.

Supply and fixed sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm waste pipe all complete all as specified. (Make: NIRALI OR EQUIVALENT APPROVED MAKES).

S&F 1.00 mm thick stainless steel plate rack of size 31"x30"x10" complete all as specified. (Make - Model No BSKPR-314 of Blue Star/Nirali or its equivalent make)

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified.

M&L for point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed for the following :- (a) One light point controlled by one way switch 5/6 amps complete all as specified.

All as per item No 105, One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps complete all as specified.

All as per item No 105, One socket out let 5/6 amps point on the independent board complete all as specified.

All as per item No 105, One socket out let 5/6 amps point on the same board complete all as specified.

All as per item No 105 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified.

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified.

S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency 120 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy 120 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 25 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting complete all as specified

Taking down carefully Ceiling fan from its original position and refixing / hanging after B/R plaster work complete all as specified.

M&L painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc, complete all as specified.

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified

S&F MCB, Single pole neutral, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one complete all as specified.

Supply and fix exhaust fan, steel body AC single phase, 230V of size 300 mm sweep with blades and frame and louvers complete all as specified.

Material and labour for earthing complete in replacement with galvanized steel plate electrodes of size600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, includig necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on complete all as specified.

M K Engineering WOrks (BID ID -3365183)

M/S MOHAN KUMAR BANSAL (BID ID -3365248)

M/S ALOKE CHAKRABORTY and CO (BID ID -3365426)

M/S SINHA ENTERPRISE (BID ID -3366736)

Shri Amarnath Sah (BID ID -3365460)

ANIL KUMAR SAH (BID ID -3366728)

SINGH & CO (BID ID -3366747)