PROVN OF TRG SHED WITH IRON TUBULAR PIPES AND INTERNAL LIGHTING AT KUMAON, PROVN OF FOL DUMP NEAR MT AREA AT BDE SIG COY AND SPL REP TO

Amount

DESCRIPTION OF ITEMS

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc and getting out in soft/disintegrated rock complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/disintegrated rock each not exc. 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm in soft/disintegrated rock and getting out complete all as specified.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and as directed.

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated material exc 250 m but n. exc 500m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Removing excavated material n. exc 50 and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M&l for anti-termite treatment of the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square meter of vertical surface (Area of the substructure in contact with backfill to be measured).

M&l for anti-termite treatment of top surface of filled earth at the rate of 5 litre per sqm of surface complete all as specified & directed.

M&l for anti-termite treatment of the soil under plinth protection at the rate of 5 litre per sqm of surface complete all as specified & directed.

M&l for anti-termite treatment of the soil along with external perimeter of building at the rate of 2.5 litre per meter complete all as specified & directed.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed .

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in surface channel and drain complete all as specified & directed.

M&l forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified & directed.

Supply & Fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for RCC (Nominal mix) 1:1.5:3 type A-1 using 20mm graded stone aggregates as in Slabs supported on walls,beams and columns in floors,roofs,chajja, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L, providing cement concrete1:2:4 type B1 as in, coping, benching, bressumers, steps, incl necessary form work complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick with white marble strip 150mm wide all arond over and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing complete all as specified.

M&L for machine cut kota stone slab, 18-20 mm thick in riser and trade single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed.

M & L for rubbing and polishing to existing old kota stone slab/marble/terrazzo flooring and skirting to achieve required finish complete all as specified and directed.

Material and Labour for applying a coat of polymer based water proofing compound as per manufaturer's instructions on newly plastered surface of wall/ chajja ctc. complete all as specified and directed

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in chajjas complete all as specified and as directed.

Use & waste of form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat complete all as specified and as directed.

Use & waste of form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat complete all as specified and as directed.

Use & waste of form work to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat complete all as specified and as directed.

Use & waste of for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 15cm wide complete all as specified and as directed.

Use & waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and as directed.

Use & waste of form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality complete all as specified and as directed.

Ditto all as per Item No 41 above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.

M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in sub base to flooring complete all as specified and as directed.

M&l for aluminium dividing strips, 1.5 mm thick & 38mm wide inserted in position conforming to design complete all as specified and directed.

Demolition of brick work or stone boulder masonry, precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed.

M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6, 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.

M & L 15 mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in CM 1:3 on ceiling, soffits, chajja projection complete all as specified and directed

Supply only water proofing compound, complete all as specified and directed.

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for cement concrete type E2, 1:5:10 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified & directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate as in sub base to flooring complete all as specified and directed.

Forming construction joints 30mm deep x10mm wide filled with sealing compound grade "A" complete all as specified and as directed.

S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast ,in window cill or door cill, steps copoing kneelers, apex stone, pier caps stone set in CM 1:6 etc complete all as specified and directed.

M&L preparation of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L preparation of old previously treated wooden surface exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F mild steel barrel tower bolt stove enameled black 200 mm size with bright bolt complete all as specified and directed.

S&F mild steel pressed handle oval type 150 mm size, stove enameled black complete all as specified and as directed .

S& F 150 mm extruded aluminum alloy handles, fabricated type anodised complete all as specified and as directed.

Supply & Fix 300mm long Mild steel sliding door bolt , plate type stove enamelled black with bright bolt not less than 16mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed.

S&F Steel windows with side hung shutters including hinges with steel handle, and steel tower bolt complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including hinges with steel handle, and steel tower bolt, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilators, top hung, with glazing bars with hinges and peg stay etc complete all as specified and directed.

S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings and similar work conforming to Fe-410-o or Fe-310-0 complete all as specified & directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

Preparation of newly plastered surfaces of ceiling and applying three coat of white wash including cornices etc complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed.

Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 2 mm) complete all as specified and directed.

Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty to achive a smooth finish surface (average thickness 2 mm) complete all as specified and directed.

Preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on walls including cornices etc complete all as specified and directed.

Preparation of new (Previously untreated) plastered surfaces of walls and applying two coats of cement based paint on walls, complete all as specified and directed

M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L, preparation old, previously treated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed.

S&F non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L glazed ceramic coloured tiles 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over & incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.

M&L for rubber moulded chequered cement concrete coloured tiles 25 mm thick ,area exc 0.06 sqm but n.exc 0.16 sqm with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 20 mm thick screed bed in CM 1:6 completee all as specified and as directed.

M & L for chequered cement concrete coloured tiles 25 cm x 25 cm x 20 mm thick , with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for two coats of exterior emulsion paint (weather coat of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achieve a smooth finish surface over newly plastered surface of wall complete all as specified and as directed.

M&L for two coats of exterior emulsion paint (weather coat of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achieve a smooth finish surface over old surfaces of wall after complete removal of existing treatment complete all as specified and as directed.

S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawings.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M&l Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified & directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified & directed.

M&L for rolled sections as in framing for cladding, stiffner,glazing and the like fixed with angle cleats and connecting plates, etc complete all as specified and as directed.

M&L for rolled sections as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 complete all as specified and directed.

Ditto as per Item No 98 above but except material.

M&l Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed.

Supply & fix purpose made screw bolts with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 16-20 mm dia and exc. 10 cm and nexc. 15 cm long complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 15mm GI tubing and connection in new or old position (concealed in wall, ceiling & floor etc) including necessary fittings & fixtures etc complete all as specified and directed.

S&F 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

Refixing old serviceable 20mm GI tubing and connection in new or old position (concealed in wall, ceiling & floor etc) including necessary fittings & fixtures etc complete all as specified and directed.

S&F 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F in repairs 20 mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 15 mm bore dia Stop valves fancy type Chromium plated long shank and cup (concealed type) screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

M & L for providing precast cement concrete bond/through stones (for stone walling) type B1 (1:2:4) using 20 mm graded stone aggregate, set in cm 1:6 complete all as specified and directed.

M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.

M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed

Hand packing (any thickness) at back of walls with broken stone or boulders and raising (or lowering) to the required level complete all as specified and directed.

M&L for raised pointing to random polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of concrete surfaces of roof as water proofing treatment in CM 1:3, including finishing the surfaces even and smooth, complete all as specified and directed.

S&F in repair plain aluminium sheeting 0.56mm thick , alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing ( length and girth as fixed) complete all as specified and directed.

M & L for GI wire netting 0.90 mm dia and 12 mm mesh lathing to wood or metal studding, joists, etc. in walls , ceilings, stanchions, beams, etc. including all laps , cutting and waste complete all as specified and directed.

S&f in repairs decorative curtain rods made of MS pipe covered with coloured PVC layer, dia of pipe 25mm with decorative ends complete all as specified and as directed.

Granite (of any type of coloured) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete all as specified and as directed.

Dismantling structural steel work including door , gatesbut excluding framed truss etc.

S&f in repairs vitreous chine counter top wash basin oval shape, size 550x400mm including PVC waste pipe and waste coupling fixed with iron angle bracket complete all as specified and directed.

S&Fin repairs Pillar taps (long nose) ,cast copper alloy,with capstan heads,chromium plated screwed down high pressure ,with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed,complete all as specified and as directed.

S&F in repairs chromium plated brass peg sets of 6 pegs complete all as specified and as directed.

S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repairs Brass chromium plated Tubular towel rail , 20mm dia, D type, 60cm long between falnges complete all as specified and directed.

S&f in repair vitreous china squatting pan, orissa pattern, size 580mmx440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 lits capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and connection to pipes complete all as specified and as directed.

S&F in repairs rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position all as pacific SSR Part- I.

S&F in repairs 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement complete all as specified and as directed.

S&f in repairs PVC (SWR) 75mm dia vent cowl.

S&F in repairs PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed

S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors or in weep holes etc complete all as specified and as directed.

S&f in repairs, 125/110mm bore PVC (SWR) 'P' trap complete all as specified and directed.

M&L for water proofing treatment to roof surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally finishing with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.

E&M Portion: Taking down carefully Copper/Aluminium point wiring (Light ,fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing unserviceable or serviceable materials from site and making good the disturbed surface of walls, floors etc, complete all as specified and directed.

M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for One light point/Fan point controlled by one, one way switch of 5/6 Amps complete all as specified and as directed.

Ditto all as per Item No 141 above but for one light point controlled by two way switch of 5/6 Amps complete all as specified.

Ditto all as per Item No 141 above but for one 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.

Ditto all as per Item No 141 above but for one 3/5 pin 5/6 amps socket outlet point on independent board controlled by one, one way switch of 5/6 amps on independent board.

Ditto all as per Item No 141 above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F in repairs Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S & F Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S&F in repairs Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F in repairs Switch piano flush type, white finish, 5/6 amps, single pole, two way, complete all as specified and directed.

S&F Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F in repairs Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.

S&F Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.

S&F in repairs Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.

S&F Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.

S&F in repairs ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&f in repairs lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S&f in repairs electronic fan regulator flush type, switch size step type, 230 volts ISI marked complete all as specified and directed.

S&f in repair decorative wall light fixture made up of polycarbonate, suitable for retrofit LED 9 W (spiral B-22) complete all as specified and directed.

Supply and fixing in repairs LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing in repairs LED Integrated Batten T5 box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&f in repairs 10 W LED lamp/bulb complete all as specified and directed.

S&F in repairs 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

S&F 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

Supply and laying in repairs XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.

Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.

M&L in repair for sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 2x6 Sqmm, of code Red for Phase, Black for Neutral & Green for Earth concealed in wall and drawn including 25mm PVC conduit along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.

M&l for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel all as shown in earth plate No 3 of MES schedule 2009 Parat-I connected to earthing test point including earth continuity conductor and loop earthing etc as required 4mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thick in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @150c/c both ways including with lifting handle and earth lead and GI protection pipe light grade 15mm dia beyond 7.5 mtr from electrode to earth terminal point/main switch board and 20 mm bore GI watering pipe medium grade including dismantling old earthing complete all as specified & directed.

S&F in repairs MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

S&F in repairs MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

Supply and Fix in repairs MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

Supply and Fix MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

Supply and in repairs Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.

S&f in repairs MCB Triple pole & neutral 415 volts, 63 amps, of 10 KA complete all as specified and directed.

Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.

S&f in repairs exhaust fan AC single phase 230/240 V of size 300 mm sweep with louvers complete all as specified and directed.

M&l for cutting, opening hole on wall circular/rectangular in shape for fixing of exhaust fan of size 300/200/450 mm sweep including plastering and making good the disturbed surface and surrounding complete all as specified and directed.

Supply and fixing of fresh air fan, single phase 230/240 V OF size 250 mm sweep 1400 RPM with suitable louvers and making connections with twisted copper flexible wire complete all as specified and directed.

aditya construction