SPECIAL REPAIR TO PARTHA BLOCK (OFFICER MESS) AT AF STN JODHPUR AND PART ITEMS OF SPECIAL REPAIR TO OLD CONVENTIONAL INTERNAL LIGHTS IN LED LIGHTS AT AF STN JODHPUR

Amount

Special repair to Partha Block (Officer Mess) at AF Stn Jodhpur

Dismantling floor hearth or wall tiling including cement mortar or bedding (but not backing ) removiing serviceable tiles to store and rubbish of the premises

M&L for coloured non skid ceramic tiles of size 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06Sqm but n.exc 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 20 mm screed bed in CM 1:6 for lying floor finishes.

M&L for glazed ceramic tiles, coloured, 450x300x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone or brick masonry surfaces as directed by Engineer-in-Charge.

M&L for vitrified light coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for vitrified light coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar complete all as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.

Taking down of plaster from wall/ celing and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces complete all as specified and directed.

M&L for rendering 15 mm thick on smoothfaces of brick work or concrete surfaces in CM1:4 mixed with using water proofing compound @ 3% by weight of cement finished even and smooth complete all as specified and directed.

Material & labour 10mm thick rendering in CM 1:3 concrete surfaces of ceiling etc, finished surfaced even & smooth with out using extra cement complete all as specified & directed.

M&L for 20 mm thick cement plaster (on roof projection, chajja's, ceiling etc.) in CM(1:3) in two coat each 10 mm thick finished even and smooth without using extra cement complete all as specified and directed

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment tomatch the shade of granite stone including grinding and polishing over 20 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 completed all as directed by Engineer-in-Charge

Supply only liquid water proofing compound.

Material and Labour for complete removal of existing treatment of plastered or unplastered surfaces of wall and applying two coat of water proof appex paint ( weather coat ) over a coat of primer in any shade or colour as approved by Engr-in-charge complete all as spfd.

Material and Labour for preperation of newly plastered surfaces of wall and applying two coats of Acrlic distemper over 1mm thick wall care putty over a coat of primer complete all as specified and directed by Engr-in-Charge

M & L for three coat of white wash on new surface of ceiling including preparation of new surfaces as directed by Engineer-in-Charge

M&L for preparation of old or previously treated wood and wood base surfaces of any description, not otherwise described exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparing new steel surface of any description not otherwise described for over 10 cm width or girth and applying two coat of synthetic ennamel paint with red oxide primer complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 sqm n.exe 4 sqm each.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc.

M/L for factory made, Glazed and skeleton shutters for door/window, of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats Note: Glazed or cloth etc in panelsor sash square shall be measured seperately

S&F Anodised aluminium powder coating of any color window and ventilator shutter fixed type/sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats,glazing clips,rubber packing,anodisedaluminium snap beading,screws etc complete all as specified and directed.

Supply and fix factory made Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S/F 150mm size aluminium anodised handles, cast type.

S/F 150mm long aluminium anodised barrel tower bolt of extruded section.

S&F aluminium alloy sliding door bolt 300mm long, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 100 mm size butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type C - 22 / 21 complete.

S&F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as directed.

S&F brass 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as directed.

Supply & fixed in repair 150 mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as directed.

Supply & fixed in repair 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as directed.

Supply & fixed in repair 150 mm long aluminium handles cast type, anodised complete all as directed.

Supply & fixed in repair 100 mm long aluminium handles, cast type, anodised complete all as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed.

Supply and fix 4 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed.

S & F mild steel frame work such as grills, grating framed guard bar with ends of bars shouldered and / or riveted and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S&F 18mm thick solid PVC board plain colour sheet having density of 600 kg/CBM of density as in kitchen cabinate including powder coated M.S 'W' hinges 50mmx58 mmx19mm with screw approval by Engr-in-charge. (Make Rajshree)

S & F of 40 mm wide flap when open, brass bright finish continuous (Piano) hinge complete all as specified and directed.

M & L PCC (1:3:6) type C1 as in hold fast block, coping, bedblock etc.

Taking down or up 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking down or up 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Supply and fix 15mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Supply and fix 20mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc. and cutting chases for concealed water tubing or concealed conduit wiring etc.

Dismantling of water tank exc. 250 Litres but not not exc. 500 Litres capacity complete all as specified and directed.

S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S & F of 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and Fix, in repair pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore, including taking down existing unserviceable one complete all as specified and directed.Make:Cat No.CON 011KN of Jaquar or equivalent make of Marc/Kohler)

S & F in repairs 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified.

S&F in repair 10 ltr capacity PVC valveless syphone action type, flushing cistern low level, white with inlet, ball valve float and handle incl brackets with PVC high flush pipe complete all as specified and directed.

S&F in repair vitreous chaina wash hand basin 550X 400mm (flat ball type) any size including cutting for and pinning in ends of brackets and fixing of supply and waste water pipe complete all as specified and directed.

S & F 125mm size brass chromium plated shower rose with or without swivel joints with arm, fixed to steel pipe or union of 15mm bore fixed as in repairs complete all as specified and as directed.

S & F for CP Toilet paper holder fixed to walls complete all as specified and directed.

S & F for Stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including bedding in cement mortar (1:4) on dwarf wall or including fixing cantilever cast iron brackets, connecting union to pipe etc., overall size 915mm x 460mm with bowl size 410mm x330mm x 160mm complete all as specified and directed.

S & F for 15mm size PVC connection pipe with PTMT nut of length 450mm complete all as specified and directed.

S&F 15 mm size PVC connection pipe with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair chromium plated soap dish complete all as specified and directed.

S&F in repair chromium plated towel rail 600mm long complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required

S&F in repair for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls as directed by Engineer-in-Charge

All as per serial item No 66 above but 75 mm bore completeall as directed.

M & L for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for PVC (SWR) gully trap of 125/ 110 mm setting and jointing with solvent cement complete all as specified and directed.

S&F UPVC (SWR) bend in any radius 110 mm dia. complete all as specified and directed.

All as per serial item No 70 above but 75 mm dia completeall as directed.

S&F 110mm dia PVC(SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.

S&F mild steel flat iron 25 x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Supply and Fix, in repair two way bib tap, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed. Make:Jaquar Cat No CON 041KN or equivalent make of MARC/Kohler)

S& F in repair chromium plated hand shower (health faucet) completed all as directed.

S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup , screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions as directed by Engineer-in-Charge.(Minium weight 15 mm-400 gms)

S&F in repair 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe all as specified & directed. Make Cat No QQT-7037 of Jaquar or equivalent of Kohler/ Marc

S&F in repairs 15 mm dia CP fancy wall mixer with L Bend (incl provision of O/H shower & hand shower) for mixing hot & cold water screwed down for iron pipe and fixed as in repairs complete with hand shower HSH-1717 and tube. (Make Cat No QQT-7281 of Jaquar or equivalent of Kohler/Marc.

S&F of 15 mm bore brass chromium plated basin Mixer for mixing HOT & COLD water screwed down for iron pipe or for brass ferrule complete all as specified and directed. Make Jaquar or equivalent of Kohler/Marc.

S&F in repair 25 mm MS powder coated curtain rod with and including fancy type powder coated MS fixing brackets, stops rollers etc complete all as directed by Engr-in-charge

Demolition and breaking up of old existing drain pipes (SGSW) set in cement mortar of size 150/100 mm dia bore including PCC packing under and haunching against the sides of bottom pipes complete all as specified and as directed.

M&L for 150 mm dia internal bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified specified and directed.

Excavation in 'treches n.exc 1.50M wide and n.exc 1.5 M in depths for foundations,laying of drain pipe etc and geting out in any type of soil complete all as specified and as directed.

Returning filling in soft/loose soil including spreading leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and as directed.

Removing excavated soils n.exc 50M and depositing where directed at a level n.exc. 1.5M above the starting point complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B1 ( using 20mm graded stone aggregate) as in copings, benching to manholes,water troughs and the like including weathering slighty rounded or chamfered angles and throating, and including necessary form work complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L for Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild TMT steel bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for pre cast cement concrete (1:2:4) Type B1 (using 20mm graded stone aggregates) as in covers slabs,set in cement mortar(1:4)with plain faces, complete all as specified and as directed. Note:-Reinforcement shall be measured and paid separately

Taking down old existing roof treatment (APP membrane & plaster) and removing outside MoD and Cleaning of roof slab / chajja , sweeping with brooms removing all loose materials debris etc complete all as specified and as directed by Engineer-in-Charge

M&L for 50 mm thick (average) cement concrete 1:3:6 type C-0 mix (12.5 mm graded stone aggregate) in padding over roof.

M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with water proofing compound @ 3% by weight of cement complete all as specified. NOTE : Water proofing compound shall be measured and paid for separately as “Supply only”

M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3 mm thick) with non-woven polyster reinforcement/mat with thermal insulation with white or balck or brown mineral gravel finish on upper side of membrane laid by torch application method with overlaps 100mm on length side and 100 mm on the width side as per manufacturer’s instructions over and including a coat of approved cold applied bituminous oil based primer (IS- 3384) @ 250 gm/sqm over cleaned roof surface complete all as specified and as directed by Engineer-in-Charge.

Material and labour for post constructional antitermite treatment of soil under existing floors using emulsion @ one liter per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified & directed

Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc in apron complete all as specified and directed

Material and labour for providing and injecting chemical emulsion for post constructional antitermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20 -25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigmenst to match the shade of the slab including rubbing and polishing complete including 15 mm screed bed or bedding layer in cement mortar 1:6 as directed by Engineer-in-Charge

M&L for kota-stone slab 15 mm thick in riser of steps skirting dado skirting and risers to step set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick renedering in CM 1:4 on stone masonary surfaces as directed by Engineer-in-Charge

M&L powder coated aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as spd and directed.

Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc,.

M&L for channel or grooves cutting upto a depth of 2.5 cm and width not exc 15cm into brick/concrete/stone masonary walls, with or without re-inforcement and trimming surface as required, including concealing PVC conduit 20/25mm dia with required accessories (like junction boxes/bends etc) and plastering in 1:4CM, applying two coats of approved quality white putty for making good with smooth finish to match with the existing specification of wall surface all specified and directed by engr-in-charge. Note : Rate of PVC Conduit included in relavant point wiring and shall not be paid separately.

M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawn in surface/concealed conduit heavy duty (HMS Grade), GI terminal boxes not less than 1.0mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover or including modular plates of required size for mounting switch and sockets etc. complete all as specified and directed for following : - Note : Quoted rates deems to be included cost of modular plate for mounting switches, sockets & regulators as required at site. Cutting into chases required for concealing heavy duty (HMS Grade) PVC conduits and making good to damaged surface shall be measured and paid separately under relavant item.

One light / fan point controlled by one switch one way.

One light point controlled by two Nos 5 Amps switch two way

One 3 pin 5 Amp switch & socket outlet on same board with other switches.

One 3 pin 5 Amp switch & socket outlet on Independant board.

One bell point controlled by one switch 5 Amps bell push.

All same as per item ser No 105.00 here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independant board.

All same as per item ser No 105.00 here-in-above but wiring using 4.0 sqmm multi-stranded copper conductor, single core, PVC insulated and unsheathed cable, including 4.0 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for two pin earth metal clad plug & socket point for AC/Geysers.

S&F switch modular single pole one way 6 Amps 230 volt 1 module.

S&F switch modular single pole two way 6 Amps 230 volt 1 module.

S&F switch modular single pole one way 16 Amps 230 volt 1 module.

S&F Socket modular 6 Amp 2/3 pin combined two module.

S&F Socket modular 6&16 Amp 2/3 pin combined two module.

S&F Bell Push modular single pole one way 6 Amps 230 volt 1 module.

S&F Stepped type modular electronic fan regulator, socket size, flush type 230V AC.

S&F Ceiling rose surface bakelite 65x50mm three terminal.

S&F Lamp holder insulated PVC/Polycarbonate/bakelite body, fixed on PVC round or squre box using necessay screw & gutti complete all as specified.

S&F electronic Bell Bul-Bul music, 230 volt, single phase.

Taking down carefully Ceiling fan/Exhaust fan by disconnecting electrical connections, unsecrewing from position, dismantling blades, stacking carfully at site for reuse of serviceable fans complete all as directed and specified.

Fixing only light fitting any type, connecting up with twin core PVC insulated and PVC sheathed flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Note : Serviceable light fittings taken down against item No 103.00 shall be used at site as directed by engr-in-charge.

Supply and fixing LED light fitting wall /roof mounted, Aluminium housing, 1 x 20 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete all as specified and directed.

Supply and fixing LED light fitting wall /roof mounted, Aluminium housing, 1 x 9/10 watt including LED tube with driver complete suitable body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15%, lumen output should not be less than 90 lumens per watt, total input voltage range 140-280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin complete all as specified and directed.

M&L for replacement of thread type B-17 base LED lamps Warm light 3 to 6 watt of decorative light fittings at VIP guest rooms of Officers Mess

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 25 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed by Engr - in Charge complete all as per Havells Cat No: ENDURAPEARLSL25W or equivalent model approved makes.

S&F LED light fitting 1 x 10W bulkhead luminaires including inbuild LED light driver perfect interior and exterier application connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

NOTES FOR LED LIGHT FITTINGS & BULBS : (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 02 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced on site free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

Hanging only ceiling fans, 1200mm sweep, complete with three blade, down rod, accessories and making connection from ceiling rose or connector to fan using three core 0.75sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire complete all as specified. NOTE: Fan taken down against item No 16 shall be used after complete civil work repair and minor repair of ceiling fans (like replace of rusted nut bolts, denting of blade, cleanig of dust etc)

Fixing only exhaust fan 300mm sweep, Steel/PVC body AC single phase 230V of size 300m using 4 Nos 10mm x 100mm long wall fasteners, nut and washers and connecting up using flexible three core 0.5sqmm copper stranded conductor PVC insulated and PVC sheathed flexible wire through PVC flexible conduit from ceiling rose/connector to fan complete all as specified. NOTE: Exhaust Fan/wall fans taken taken down against item No 118.00 shall be used after complete civil work repair and minor repair of ceiling fans (like replace of rusted nut bolts, denting of blade, cleanig of dust etc)

Fixing only and connecting electric meters upto 100 amps with necessary incomming and outgoing copper cable using suitable size copper alloy thimbles/lugs and numbering of connected married accomodation number all as specified and directed. Note : Serviceable meter taken down against item No 120.00 shall be used for refixing.

S&F Exhaust fan 300 mm sweep, copper wounded, four blade, metal body, BEE approved/ISI marked, air delivery shall not be less than 230 CFM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete all as specified.

M&L for Sub main wiring as per IS, single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, juction boxes etc) including taking down old unsv submain wiring complete all as specified for Two runs of 2.5 Sq.mm main Phase-Neutrals supply cable alongwith one run of single core 2.5 Sq.mm for continuous earth wire in green color (for servant qtr supply).

M&L for Sub main wiring as per IS, single core FRLS PVC insulated flexible multistranded copper conductor 1.1 KV grade drawn through & including PVC grey conduit heavy duty with necessary accessories (like bend, juction boxes etc) including taking down old unsv submain wiring complete all as specified for Two runs of 6.0 Sq.mm main Phase-Neutral supply cable alongwith one run of single core 6.0 Sq.mm for continuous earth wire in green color. (for SMQ)

Supply and replace sheet metal enclosures with socket plug top, and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB upto 16 Amps, 240 Volt capacity fixed flush to wall surface including making good to damaged surface of wall to match with existing specification and tested on completion complete including taking out old all as directed.

Supply and replace sheet metal enclosure distribution board for 240 volts, 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete including taking out old all as directed.

Supply and fix Sheet metal enclosure distribution board TPN, 415 volts, 4 way Horizontal/vertical type as per site requirement, double door type, 200 Amps rated neutral copper bus bar for housing MCBs, blank plates and including provision for fixing TPN MCB as incommer, DB fixed flush or in wall surface including making good to damaged surface of wall to match with existing specification complete including taking out old all as specified all as specified and directed.

M&L for MCB TPN/FP, 63 Amps 415 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for MCB SPN/DP 40 to 63 Amps 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

Supply and fixing MCB single pole 6-32 Amps, 240 volts, 10 kA rupturing capacity providing in DB complete including connection & testing all as specified.

M&L for wiring with TV coaxial RG-06, electrolytic grade solid annealed copper conductor having single strand of 0.7 mm dia, PVC insulated, aluminium foiled and aluminium wire braided, overall PVC sheathed cable complete including concealed PVC conduit 20mm dia from TV Socket to dish antena on roof of building complete all as specified. Note : 20mm conduit pipe inside building shall be concealed in wall surface and from external surface duly fixed with GI Saddles is deems to be included in quoted rates.

Material and labuor for earthing complete with Galvanized Steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level and filled with 15cm thick alternate layers of charcoal and salt, connected & including GI wire earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers made of galvanized iron protected by 15mm dia GI Pipe (light grade). Earth plate shall be surrounded by alternate layers of charcoal or coke and common salt in 15cm thick in layers & 15cm of widht all aurround of earth plate including 20mm dia GI light grade pipe for watering and including funnel, wire mesh, necessary earth work in any type of soil, Pre-cast RCC cover duly re inforced with 8mm dia TMT Bar @150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar embedded in cover slab, Earth Pit of PCC (1:3:6) type C2 (using 20mm graded crushed store aggrgate) complete all as specified and as shown in electrical plate No-3 of SSR Part-I including testing on completion. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii) The unit rate includes earthing lead & protection pipe upto 7.5 metre from top of earth plate.

Supply and laying GI Pipe 15 mm dia, light grade for protection of GI Earth wire 4.0mm dia complete all as specified & directed. Note : Quoted rate deems to be include cost of GI Saddle used for fixing GI pipe on wall by using screw and guttis not exceeding distance 0.6mtr.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4.0mm dia galvanised iron or steel wire all as specified.

Part items of Special repair to Old conventional internal lights in LED lights at AF Stn Jodhpur

Taking down carefully copper/aluminum point wiring (Light/ fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc, stacking at site for reuse or removing materials to store for keeping in for taking credit and making good the disturbed surfaces / walls/ floors etc,.

M&L for channel or grooves cutting upto a depth of 2.5 cm and width not exc 15cm into brick/concrete/stone masonary walls, with or without re-inforcement and trimming surface as required, including concealing PVC conduit 20/25mm dia with required accessories (like junction boxes/bends etc) and plastering in 1:4 CM, applying two coats of approved quality white putty for making good with smooth finish to match with the existing specification of wall surface all specified and directed by engr-in-charge. Note : Rate of PVC Conduit included in relavant point wiring and shall not be paid separately.

M&L for point wiring with 1.5 Sq. mm, multi-stranded copper conductor FRLSH, single core, PVC insulated and unsheathed cable for phase and neutral, including 1.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly, drawn in surface/concealed conduit Heavy duty (HMS Grade), GI terminal boxes not less than 1.0mm thick fixed flush to wall surface, covered with & including 3 mm thick plastic laminated sheet top cover or including modular plates of required size for mounting switch and sockets etc. complete all as specified and directed for following : - Note : Quoted rates deems to be included cost of modular plate or hylem board for mounting switches, sockets & regulators as required at site. Cutting into chases required for concealing heavy duty (HMS Grade) PVC conduits and making good to damaged surface shall be measured and paid separately under relavant item.

One light / fan point controlled by one switch one way.

One light point controlled by two Nos 5 Amps switch two way

S&F switch modular single pole one way 6 Amps 230 volt 1 module.

S&F switch modular single pole two way 6 Amps 230 volt 1 module.

S&F Ceiling rose surface bakelite 65x50mm three terminal.

S&F Lamp holder insulated PVC/Polycarbonate/bakelite body, fixed on PVC round or squre box using necessay screw & gutti complete all as specified.

S&F suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed by Engr - in Charge complete.

M/S BUDHRAM BISHNOI

J AND T Enterprises