Improvement of officer bungalows in the section of ADEN/HQ/JU

B- All Items of USSOR -2021 Railway Formation works, Bridge work & P

Item Breakup - A-All Items of CPWD-DSR-2023

40 gms 18.65 Providing and fixing PTMT soap Dish Holder Each 2 111.45 222.9 having length of 138mm, breadth 102mm, 112 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of 19.1 cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 113 19.1.2 150 mm diameter Metre 30 695.8 20874 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone 19.2 aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 114 19.2.2 150 mm diameter S.W. pipe Metre 50 1179.85 58992.5 Providing and fixing in position pre-cast R.C.C. 19.19 manhole cover and frame of required shape and approved quality 19.19.3 H D - 20 JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY 115 19.19.3.1 Circular shape 560 mm internal diameter Each 20 1675.7 33514 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket 21.1 etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 10 495.05 4950.5 116 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 10 598.6 5986 117 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 10 1176.8 11768 118 (weight not less than 10kg/sqm) 21.17 Providing and fixing anodised aluminium grill Kg 10 638.35 6383.5 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 119 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 22.0 WATER PROOFING 22.1S General 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 10 8042.3 80423 120 sand : 4 graded stone aggregate 20 mm nominal size) Total 15610034.50

Item Breakup - B- All Items of USSOR -2021 Railway Formation works, Bridge work & P Way works

JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity Total 17280.40