SPL REPAIR TO BLDG NO. 167 AT ANARWALA UNDER GE DEHRADUN

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 including all quoins, arches, pillars incl demolition of old existing brick/stone work etc complete all as specified and directed.

M&L for brick work (except bricks) straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars incl demolition of old existing brick/Stone work etc complete all as specified and directed. (Old bricks obtained from demolition will be re-used)

M&L for brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including demolition of existing brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc.complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, finished surface even and fair mixed with water proofing compound as per manufacture instruction complete all as specified & directed. Note: Water proofing compound will be measured & paid separately under respective item of the schedule.

M & L for 15 mm thick rendering on brick or concrete surface in cement mortar 1:6, surface finished even and fair complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair mixed with water proofing compound as per manufacture insturction incl taking down existing cement plaster complete all as specified & directed. Note: Water proofing compound will be measured & paid separately under respective item of the schedule.

M & L 15 mm thick rendering on brick/stone work or concrete surface in cement mortar 1:6, surface finished even and fair incl taking down existing cement plaster complete all as specified and directed.

M & L 5 mm thick rendering on celing surface in cement mortar 1:3 surface finished even and smooth incl taking down existing plaster complete all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.

M&L for preparation of wall and applying wall care putty 1.50 mm thick to make the surface smooth complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated surface of walls and applying two coats oil bound distemper any tint including preparation of surface complete all as specified and directed.

M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower incl preparation of surfaces complete all as specified and directed.

M & L for applying one coat of white wash on old decorated surface of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coat of white wash complete all as specified and directed.

M&L for complete removal/ demolition of existing treatment of sunken portion such as WC & bath and treated the sunken portion as per following specifications:- (i) Clean the complete surfaces, rubbish off the premises for sunken and washing down with water. (ii) Plaster for sunken portion in CM (1:3) mixed with WPC (Dr. Fixit or equivalent) as per manufacturer's instructions. (iii) Preparation of surfaces and applying one coat of polymeric primer @ 0.30 Kg/Sqm. (iv) Providing and applying APP based polymeric water proofing members 3 mm thick of weight not less than 3.00 Kg/ Sqm. (v) Applying one coat of bitumen 85/25 @ 1.2 Kg/Sqm. (vi) Providing PCC 1:5:10 mixed with brick bats 40 mm size for sunken portion. (vii) Providing 40mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) finish even and smooth. (viii) Poinding test carried out upto 1 to 7 days .

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floor incl demolition old existing concrete complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/reangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match and fixed with apoxy over and including 15 mm thick screed bed in cement mortar 1:6 incl dismantling old existing tiles complete all as specified and directed.

M&L for non-skidceramic colour tiles 7 to 8 mm thick (Square/reangular) area of each tiles exceeding 0.11 sqm but n exc 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15 mm thick screed in cement mortar 1:6 incl dismantling of old existing tiles complete all as specified and directed.

All as per item No 20 above but as in skirting fixed over and including 10 mm thick rendering in cement mortar 1:4, incl dismantling old existing tiles complete all as specified and directed.

M&L for glazed ceramic colour tiles size 350/250x7 mm/450x350x7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 10 mm thick rendering in cement mortar 1:4 incl dismantling old existing tiles complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even andsmooth without using extra cement incl demolition old existing concrete complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement incl 4 mm thick glass stripps and demolition old existing floor complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl dismantling old stone complete all as specified and directed.

M&L for grinding and polishing to edges and rounding of granite kota or marble slab and smooth finishing complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 15 mm thick screed bed in cement mortar 1:6 incl dismantling old existing old stone/floor complete all as specified and directed.

M&L for Machine cut kota stone as in skirting 18-20 thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing fixed over and including 10 mm thick rendering in cement mortar 1:4 incl dismantling old stone/floor complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. exc. 1 Sqm but n. exc. 2 Sqm each complete all as specified and directed.

Taking down and re-fixing the existing shutter in same opening after & including necessary easing/repair etc. n exc. 1 Sqm each complete all as specified and directed.

Taking down shutter of any description, n. exc. 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2.0 Sqm each and removing from site complete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame and removing from site complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm but n exc 4.0 sqm each without taking off shutter from the frame and removing from site complete all as specified and directed.

S&F Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and frame filled with and including PCC1:3:6 type C-0 with using 12.5 mm stone aggregate complete all as specified and directed.

S&F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and frame filled with and including PCC1:3:6 type C-0 with using 12.5 mm stone aggregate complete all as specified and directed.

S & F 30mm thick second class hardwood (Golden Teak) glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F factory made 100 % solid wood plastic composite (WPC) door frame 75x50mm made from

wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed.

S&F 18 mm thick WPC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling of old existing board complete all as specified and directed.

S&F 18 mm thick WPC board both side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive incl dismantling of old existing board complete all as specified and directed.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

S & F stainless steel barrel tower bolts 150 mm long one piece complete all as specified and directed.

S & F stainless steel barrel tower bolts 200 mm long one piece complete all as specified and directed.

S & F stainless steel butt hinges, medium weight 100 mm long one piece complete all as specified and directed.

S & F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame complete all as specified and directed.

S & F stainless steel handles 125 mm long one piece and fixed with screws/welded to frame complete all as specified and directed.

S & F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed.

S & F in 300 mm Mild Steel , ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F aluminum alloy powder coated standard hollow section as mentioned below for window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type with aluminum sections as per Series-A (15mm) 3 track of Jindal section numbers for sliding windows and glazed with tinted coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long with stainless steel grill consisting of 12 mm square bar & 40 x 5 mm thick SS flat all around incl making good of existing surfaces with plaster and external (cement base paint)/ internal (OBD) finishes complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding incl dismantling old steel work any description complete all as specified and directed.

S&F mild steel, plain, black sheet 1.0 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitered angles,incl dismantling old sheet any description etc. as required complete all as specified and directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.

M & L for applying two coats of synthetic paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed.

Taking up or down 15mm bore PPR/ steel tubing and connection incl removal from site complete all as specified and directed.

S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed.

Taking up or down 20mm bore PPR/ steel tubing and connection incl removal from site complete all as specified and directed.

S&F in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580mm x 440mm, white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed

ss than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling complete all as specified and directed.
S&F in replacement mirror light decorative compact luminaries with decorative ends caps incl 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. •S& F oval shape Bulk head Edge-lit LED fitting comprising with high brightness LED 10 watt, IP-67 protection complete all as specified and directed.aS& F Glaze Wall Light including 7/9 watt LED ( B22) type complete all as specified and directed.ä
S&F in replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified and directed.CS&F sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade surface on wall along with 4 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion and taking down old unserviceable wiring complete all as specified and directed. Note: 03 runs of copper cable and one run of conduit will be measured as 01 RM unit length. ç
6ì
.ÚS&F sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar including taking down old unserviceable DBs any type complete all as specified and directed.mS&F in repair MCB SP 6 to 32 Amp 'C' series 10 KA repturing capacity complete all as specified and directed.hS&F in repair MCB SPN 40 Amp 240 V AC 10 KA repturing capacity complete all as specified and directed.¨S&F in replacement for distribution Box MCB Procted socket with sheet steel enclosure 20 A MCB DBOXX Combo DP including PLUG TOP complete all as specified and directed.
S&F electric water heater storage type, ABS Body with Glass lined tank and heating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve thermostate NRV connection piece complete all as specified and directed.
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep complete including making of holes where required at site with all fittings complete all as specified and directed.çS&F exhaust fan steel body AC Single phase, 230 volt of size 300 mm sweep with blades, and frame and louvers complete with all fittings, including making of holes where required at site complete all as specified and directed.
Taking down ceiling fan from existing building and kept in safe custody and again refixing the same after greasing / oiling the same ceiling fan including provision of cable flexible 3 core of suitable size wire from ceiling rose to fan complete all as specified and directed.çExcavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mt

敤瑰⁨湡⁤敧瑴湩⁧畯⁴硥慣慶整⁤潳汩猯湡⽤湵癳䰠⁔慣汢⁥潦⁲慬楹杮漠⁦慣汢⁥湡⁤敧瑴湩⁧畯⁴潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮帊ࠂ
畓灰祬‬慬楹杮愠摮琠獥楴杮堠偌⁅湩畳慬整Ɽ愠浲畯敲⁤敨癡⁹畤祴攠敬瑣楲⁣慣汢⁥楷桴愠畬業楮浵挠湯畤瑣牯‬ㄱ〰瘠汯獴朠慲敤‬牣獯⵳敳瑣潩慮牡慥漠⁦楳敺㌠‵煳浭㌠㔮挠牯ⱥ瀠獡楳杮琠牨畯桧瀠灩ⱥ氠楡⁤湩琠敲据敨ⱳ映硩摥漠慷汬‬䰠⁔慰敮潢牡Ɽ†楷桴爠煥極敲⁤污浵湩畩慣汢⁥畬獧‬畬獧猠潨汵⁤牰灯牥祬挠楲浭楰杮眠瑩⁨牣浩灰湩⁧潴汯ⱳ栠慥⁴桳楲歮樠楯瑮ⱳ䌠汯畯⁲潣敤栠慥⁴桳楲歮猠敬癥獥愠⁴潢桴挠扡敬攠摮ⱳ挠扡敬朠慬摮映牯挠扡敬猠晡瑥⁹桷湥瀠獡楳杮琠牨畯桧瀠湡汥栠汯獥‬湩汣摵湩⁧慬楹杮挠扡敬爠畯整椠摮捩瑡牯⁳景猠極慴汢⁥楳敺删䍃漠⁲瑳敥祴数愠⁳数⁲楳整爠煥極敲敭瑮挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ਠɝ8¼䴀䰦猠湡⁤畣桳潩楮杮愠摮挠癯牥湩⁧景甠摮牥朠潲湵⁤慣汢⁥獵湩⁧牣獵敨⁤敭慴慳摮椠牴湥档獥映牯挠扡敬瀠潲整瑣潩潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮倨湵敮⁤桴捩湫獥⁳楷汬戠⁥敭獡牵摥뤩敒潭楶杮攠捸癡瑡摥洠瑡牥慩猨楯⥬琠⁡楤瑳湡散渠‮硥⁣〵洠牴愠摮搠灥獯瑩湩⁧桷牥⁥楤敲瑣摥愠⁴⁡敬敶⹮攠捸ㄠ㔮洠牴愠潢敶琠敨猠慴瑲湩⁧潰湩⁴潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮ㄊāM&L for brick well burnt Class ‘B’ as cover to underground cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches complete all as specified and directed. 倀牥ㄊ〰ਰ潎덳♍⁌潦⁲䥇吠扵湩⁧楬桧⁴牧摡⁥〴洠楤⁡楷桴愠汬映瑩楴杮愯散獳牯敩⁳潦⁲慣汢⁥牰瑯捥楴湯愠⁳数⁲楳整爠煥極敲敭瑮挠浯汰瑥⁥污獡猠数楣楦⁤湡⁤獡搠物捥整⹤††††††††††††䴠ࠃ䈠单䈠剁䌠䅈䉍剅ⴺਠ愨 〲‰流獰㌠匠牴灩⁳湡⁤敎瑵慲瑓楲⁰〱‰流獰‬汁浵湩畩潣摮捵潴Ⱳ眠瑩⁨潣潬⁲潣敤⁤敨瑡猠牨湩慫汢⁥汳慥敶愠摮猠慨汬戠⁥潭湵整⁤湯渠湯栠杹潲捳灯捩‬潮潣扭獵楴汢ⱥ琠慲正爠獥獩慴瑮‬楨桧猠牴湥瑧⁨䵄⁃慭整楲污‬湩整捲湯敮瑣潩景愠汬椠据浯湩獧☠漠瑵潧湩獧ਮ椨 敒Ɽ夠汥潬ⱷ䜠敲湥倠慨敳椠摮捩瑡湩⁧楌桧獴䰠䑅琠灹⁥㈲‰⁖䍁‭‱敓⹴⠠敓⁴景琠牨敥⸩䤊䍎䵏义⁇啓偐奌ⴺਠ椨 䍍䉃ㄠ㔲䄠灭⁳㔲䬠⁁‬‴潐敬眠瑩⁨摁番瑳扡敬琠敨浲污☠䘠硩摥洠条敮楴⁣敳瑴湩⁧敲敬獡⁥ㄴ‵潖瑬ⱳ㔠䠰⁺〽‱潎ੳ問䝔䥏䝎匠偕䱐㩙‭⠊⥩䴠䉃匠乐㐠‰流獰‬㌲‰潶瑬ⱳ㔠䠰ⱺ爠灵畴楲杮挠灡捡瑩⁹〱䬠⁁‽‵潎ੳ椨⥩匠慰散映牯䘠硩湩⁧景†‱桐獡ⱥ†′楗敲‬†牐ⵥ慰摩††湅牥祧䴠瑥牥⵳〠‴潎ੳ椨楩 䵄⁃潃湮捥潴⁲′慷⁹〱‰⁁潦⁲畯杴楯杮猠扵慭湩猠灵汰⁹‭‵潎⹳倊湡汥眠物湩⁧潦⁲潣瑮潲楣捲極⁴楷桴挠灯数⁲汦硥扩敬ㄠ㔮匠浱☠瀠睯牥†楷楲杮洠湩浩浵㐠匠浱汦硥扩敬焮㤁耀㜁㤁Ԁ㜂ꌀ♍⁌潦⁲慥瑲楨杮挠浯汰瑥⁥楷桴朠污慶楮敳⁤瑳敥慥瑲⁨汰瑡⁥汥捥牴摯⁥〶砰〶砰洶桴捩畢牲敩⁤楤敲瑣祬椠牧畯摮⠠慥瑲⁨楰⁴潮⁴敬獳琠慨⸲㔲洠牴搠灥桴戠汥睯朠潲湵⁤敬敶瑡愠祮琠灹⁥景猠牴瑡⥡眠瑩⁨潴⁰摥敧漠⁦桴⁥慥瑲⁨汰瑡⁥潮⁴敬獳琠慨⸱洵牴戠汥睯渠牯慭牧畯摮氠癥汥挠湯敮瑣摥戠⁹‴浭搠慩䜠⁉楷敲愠⁳慥瑲⁨敬摡挠湯敮瑣摥戠⁹敭湡⁳景戠慲獳渠瑵⁳湡⁤潢瑬‬桴浩汢獥挠敨正渠瑵ⱳ眠獡敨獲椠据畬楤杮挠湯牣瑥⁥档浡敢⁲景倠䍃ㄠ㌺㘺琠灹⁥ⵃ‱獵湩⁧〲浭朠慲敤⁤瑳湯⁥条牧来瑡⁥楷桴映楡⁲楦楮桳‬湩整湲污猠牵慦散漠⁦潣据敲整挠慨扭牥猠慨汬戠⁥〳洰㍸〰浭‬㔱浭琠楨正瀠慬瑳牥椠䵃ㄠ㐺映湵敮楷桴眠物⁥敭桳‬楰⁴潣敶⁲景猠穩⁥㈳砰㈳砰〸浭猠穩⁥楷桴删䍃⠠㨱㨲⤴吠灹⁥ⵂⰱ甠楳杮㈠洰牧摡摥猠潴敮愠杧敲慧整爠楥普牯散⁤楷桴堠䵐‬楦汬摥愠潲湵⁤楷桴挠慨捲慯ⱬ搠獵⁴湡⁤潣浭湯猠污⁴污獡猠潨湷椠汥捥牴捩污瀠慬整丠″景䴠卅匠剓倠牡⵴⁉㈨〰⤹愠摮猠数楣楦摥椠据畬楤杮愠摮瀠潲楶楳湯漠⁦䥇眠物⁥灵潴㜠㔮洠牴⁳潬杮眠瑩⁨㔱浭搠慩氠杩瑨朠慲敤䜠⁩楰数瀠潲整瑣潩湡⁤慷整楲杮瀠灩⁥景䜠⁉〲洠潢敲‬敭楤浵朠慲敤‬湩汣摵湩⁧污硥癡瑡潩湡⁤慥瑲⁨潷歲愠摮挠湯敮瑣湩⁧桴⁥慥瑲楨杮猠牴灩琠慰敮ⱬ椠据畬楤杮琠獥楴杮漠潣灭敬楴湯挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⁤祢䔠杮⵲湩挭慨杲⹥††††丠瑯㩥‭椨 䍒⁃楰⁴潣敶⁲桳污敢瀠敲慣瑳漠⁦䍒⁃ㄨ㈺㐺 祴数䈠ㄭ‬〸浭琠楨正爠楥普牯散⁤楷桴堠䵐眠楥桧楴杮渠瑯氠獥⁳桴湡㐠杫猯浱椠楬略漠⁦䥃挠癯牥ਮ椨⥩䌠獯⁴景愠摤瑩潩慮䥇眠物⁥潭敲琠慨⸷‵瑭獲眠汩敢洠慥畳敲⁤湡⁤慰摩猠灥牥瑡汥⁹湵敤⁲敲敬慶瑮椠整獭‮ࠠ慅档匠瑥

S&F in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed.

S&F in repair 15mm bore Stop cock concealed type fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair CP Health Faucet with 1.20 mtr chromium plated metalic expandable tube & hook complete all as specified and directed.

S & F in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

S&F in repair of Aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed.

M&L for 70 mm thick vibromatic reinforced cement concrete precast 1:2:4 (using 20mm graded stone aggregate) with 1mm thick mild steel CR sheet around painted with 2 coats of bituminous paint , as in drain cover slabs finish fair even and smooth without using extra cement incl form work and 10 mm dia bar spacing of bar 100mm c/c including , 100 mm long handle of 12mm dia round bar counter sunk by 25mm welded to reinforcement complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed.

Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) any type including unscrewing from board,fitting and fixture such as switches, ceiling roses, holders, regulators sockets ,light fittings etc removing materials from site and making good disturbed with the existing surfaces complete all as directed.

S&F Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed.

S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed.

Supply, installing, testing and commissioning factory made and tested LT Panel Indoor type Wall mounted, of size : 900 X 700 X 250 mm suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Aluminium bus bars TPN of capacity 200 Amps rating installed on DMC insulators with bus bar chamber. front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade. The scope of work also comprising of the following:-