Renovation of Civil and Interior works under deposit work of AHM : Renovation of Civil, Interior, Furnishing, Electrification works and Interior works of the office of the Secretary (Housing), Affordable Housing Mission (AHM) at Urban development and Urbana housing Department, Block No. 14/7, New Sachivalaya, Gandhinagar deposit work of Affordable Housing Mission (AHM).

ITEM NO ITEM DESCRIPTION AMOUNT (In Rs.)

22 Electrical Miscellaneous

* TOTAL ELECTRICAL WORK AMOUNT

23 ICT Distribution System For Data And Voice Infra

24 Cable Television Distribution System

* TOTAL ELV WORK AMOUNT

* TOTAL CIVIL + FURNITURE + E&M WORK AMOUNT

Iteam No. Item Description Quantity Unit Amount (in Rs.)

DISMANTLING WORKS

Dismantling of existing masonry work of any type, while preserving the integrity of any existing

brickwork, regardless of thickness, plaster, or wall lining, using the necessary tools, plant, and

scaffolding. The work includes sorting the dismantled material, disposing of unserviceable material

at an approved location, and stacking the serviceable material with all required all lifts and all

1 leads, as directed by the Engineer-in-Charge. 5.00 Cum 577.92

The volume of the existing masonry work shall be measured for payment before dismantling

begins. The method for calculating the volume for payment shall be approved by the Engineer-in-

Dismantling or removal of tiled, paved floors, stone floors, including all required sub-layers

and stones from door jambs, windows, ventilation openings, wall tiles, dado, etc. This includes any

necessary earthwork and backing coat mortar. The work involves disposing of unserviceable

material at an approved location with all necessary lifts and all leads, and stacking serviceable

material, including loading and unloading for all required leads and lifts, as directed by the

Engineer-in-Charge.

The area of the existing flooring/dado shall be measured for payment before the dismantling

begins. The method for calculating the area for payment shall be approved by the Engineer-in-

Dismantling of doors, windows, ventilators, nets, meshes, grills, rolling shutters, Louvers

(fixed/Openable) etc., whether wood or steel or glass, including frames, shutters, architraves,

holdfasts, hood covers, guide channels, and other attachments, as per site conditions. The work

must be carried out without damaging any adjacent structures or elements.

The serviceable material must be stacked with all necessary lifts and all leads, while

unserviceable material must be disposed of at an approved location outside the campus, including

all required leads and all lifts, as directed by the Engineer-in-Charge. Existing hardware fixed to

doors, windows, and ventilators shall be removed from dismantled elements and stacked as

instructed by the Engineer-in-Charge. The Identification of the servicable material shall be

confirmed by the engineer incharge. The dismentle each number of door/window /ventilators etc

shall be measured for payment without considering any wastage. No extra payment to be made

regarding double shutter/ingle shutter/fixed shutter/ transom etc

Chipping, Removing and scraping of old and/ or deteriorated plaster

Chipping, removing, and scraping of old and/or deteriorated plaster of any type and any thickness

from any surface, using methods that avoid damaging existing masonry, plain, or reinforced

cement concrete surfaces to be retained. This includes preventing vibrations to existing and

neighbouring elements. The work involves stacking serviceable material with all necessary lifts

4 and any leads, and disposing of unserviceable material at an approved location outside the 518.00 Sqm 20.55

campus, including all required leads and all lifts, as directed by the Engineer-in-Charge.

(Note: This item does not apply to walls designated for demolition.) The area of the existing plaster

shall be measured for payment before the dismantling work begins.

Dismantling of any type of False ceiling

Dismantling of any type of false ceiling of any size, any shape, any thickness, anly floor,

any material, any level, including framing, accessories, etc. The work involves disposing of

unserviceable material at an approved location with all necessary lifts and all leads, and stacking

serviceable material within site area, including loading and unloading for all required leads and

5 lifts, as directed by the Engineer-in-Charge. The Identification of the servicable material shall be 138.00 Sqm 56.79

confirmed by the engineer incharge.

The area of the existing roofing shall be measured for payment before the dismantling begins. The

method for calculating the area for payment shall be approved by the Engineer-in-Charge.

Dismantling of any type of Partition/wall lining/panelling

Dismantling or removal of any type of Partition/wall lining/panelling of any material, any size, any

shape, any thickness, anly floor, any level, including framing, any type of superficial material, and

other component etc. The work involves disposing of unserviceable material at an approved

location with all necessary lifts and all leads, and stacking serviceable material within site area,

6 including loading and unloading for all required leads and lifts, as directed by the Engineer-in- 11.00 Sqm 83.48

Charge. The Identification of the servicable material shall be confirmed by the engineer incharge.

The single time area of the partition/wall lining/panelling shall be measured for payment before the

dismantling begins.

Removing of existing sanitary work

Removing existing sanitary fixtures and flushing cisterns, including all relevant accessories (WC,

wash basin, urinal, etc.). The work includes stacking useful materials near the site and disposing

7 of unserviceable materials at an approved location outside the campus, with all necessary leads 2.00 Each 425.93

and all lifts, as directed by the Engineer-in-Charge.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Dismantling of existing metalworks at all levels, including dismantling, cutting, and

dismembering all structural elements by any means, as suggested by the Engineer-in-Charge.

This includes earthwork, base concrete, and reinstating the disturbed ground. The work involves

stacking useful materials and disposing of unserviceable materials at an approved location,

8 including all necessary leads and all lifts, as directed by the Engineer-in-Charge. 100.00 Kg. 3.85

The weight of the dismantled steel members shall be measured for payment. The method for

calculating the weight of the steel for payment shall be approved by the Engineer-in-Charge.

Total Carried Over to Summary

MASONRY WORK/PARTITION WORK

1) Masonry work shall be carried out for all floors, all levels, all heights, and all places including

loading, unloading, stacking, transporting, hoisting, and erecting by any means (mechanical or

2) The Contractor shall grout all cavities, and holes/gaps in the masonry with suitable mortar as

suggested by the Engineer-in-charge and making good the required finish at no extra cost.

Providing and laying brick masonry in the superstructure using common burnt clay bricks

conforming to IS 1077-1992, having a compressive strength of not less than 35 kg/sq.cm in

cement mortar 1:5 (1 cement: 5 coarse sand) in any shape, any thickness, including finishing,

9 curing, scaffolding racking out the joints/ flush jointing etc. complete for all levels, all floors, all 5.00 Cum 4,660.83

heights, as per the issued drawings and as directed by the Engineer-in-charge.

Providing and laying half brick masonry in the superstructure using common burnt clay building

bricks, having a compressive strength of not less than 35 Kg/cm2 in cement mortar 1:4 (1-

Cement: 4 -fine sand) in any shape, any thickness, including finishing, curing, scaffolding racking

10 out the joints/ flush jointing, etc. complete for all levels, all floors, all heights as per the issued 5.00 Sqm 704.70

drawings and as directed by the Engineer-in-charge.

Gypsum Dry wall system

Providing and fixing 2 hr fire rated 122mm thick double layered drywall partition system of

approved make for height up to 4.50 mt which includes (on both faces/ elevations) inner layer of

tapered edge minimum 12.5mm thick Fire Resistant Gypsum Board having density minimum

kg/m3 (conforming to IS 2095 Part 1: 2011/ EN520::2004, TYPE-F/ ASTM C1396, TYPE X) and

outer layer of tapered edge 12.5mm thick calcium sulphate dihydrate encased in high gsm paper

liners with glass fibbers and other additives for enhanced the fire, acoustics and impact

performance, third party EPD Verified as per ISO 14025, having minimum density 900 kg/m3, with

maximum allowable point load on single board 25 kg to 30kg without any ply backing, complies

with BS EN 520:2004 – Type A, F, D, R, I, Thermal Conductivity: 0.24 w/mºK, Thermal resistance:

Framing system -

11 GI framing system consists of Close stud/ C stud of size approximately 70x34x36x0.5mm 27.00 Sqm 3,390.42

confirming to IS 513 having Y/S-minimum 230 Mpa, and Finish - AZ150 (IS 15961). The stud shall

be placed at 600mm c/c in 72x32x32x0.5mm (approx.) floor channel and 72X32x32x0.5 mm

ceiling channel. The floor & Ceiling channel is anchored to the floor & ceiling using zinc coated

Rawl plug of size Ø8x45mm and having Pull out Load -7.5 kN/ anchor fasteners of required

capacity as per the manufacturer's specification at 600mm c/c. Floor channel to be wrapped with

70µ Self Adhesive LDPE moisture barrier film to further improve corrosion resistance

performance. A noggin channel of 70x40x0.5mm has to be provided at the horizontal joints of the

two boards and the top of the board in case the top is not going up to the ceiling channel.

Gypsum boards shall be fixed with drywall screws of 25mm/ 35mm at minimum spacing of 300mm

at centre and 150mm at periphery. Boards shall be jointed and finished so as to have a flush look

which includes filling and finishing with Jointing compound, Joint Paper tape, angle beads at

corners. The junction of the partition with masonry/ RCC & all penetration through the partition has

to be treated with fire and acoustic sealant of approved make.

In case surface/member is not available abutting the door system for fixing, contractor shall design

and propose, a sub-system/ MS frame for fixing arrangement as per manufacturer's

recommendation.

Contractor shall prepare shop drawing based on concept drawing including fixing arrangement,

services and prepare mock-up of required area. As per approved shop drawing and mock-up,

contractor shall start the work. Contractor shall furnish certification of entire system for STC

and 120 minutes Fire rating.

Dry wall system shall be fixed on any type of surface i.e. masonry, RCC, dry wall system, metal

work etc) with required capacity of anchorage as per manufacturer's specification. Stability of door

and partition system shall be responsibility of contractor.

Contractor shall provide fixing arrangement for all elements, which to be fixed in dry wall system.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

All frame members shall be connected to each other by using metal screws. 50mm Rock wool slab

of density 24kg/m³ shall be placed in a metal framework. A Glass wool holding clip should be used

to hold the Glass wool slab in its position.

The rate shall be included for the cost of making openings for light fittings, switchboard, any other

services cut-outs made with a frame of perimeter member suitably fixed, etc complete for all levels

and all heights and as directed by the Engineer in Charge but excluding the cost of painting work.

All Opening cut outs & periphery shall be treated with Fire & acoustical sealant. The contractor

shall be cut the first layer of the gypsum board for the provision of skirting and, an additional board

shall be provided and the top layer to be cut properly as per manufacturer's specification. At the

location of the door frame in the drywall system, the wooden member shall be fixed to the required

size and as per the manufacturer's specification. Horizontal framing members shall be provided as

per architectural requirements and as suggested by the Engineer in charge.

Out to out area of drywall elevation on one side only shall be measured for payment after

deducting for openings for doors/windows and service cut-outs of size more than 0.36 sqm etc,

complete for all floors, all heights. Any additional members, support members, fasteners, fixing

details, etc required in dry wall system shall be designed and provided by contractor and approved

by the Engineer-in-charge, shall also be included in the rate of this item and nothing extra shall be

payable for the same.

Total Carried Over to Summary

PLASTER AND WATERPROOFING WORK

10 mm thick Cement mortar plaster

Providing and applying an average 10 mm thick single coat cement plaster and finishing with a

trowel, on the ceiling, side, and soffit of beam and stair, etc in cement mortar 1:3 (1 cement :

coarse sand), in any shape, at all floors, all heights with necessary scaffolding, curing, application

of bonding agent/making grooves, forming pattas, application of bonding agent/ hacking RCC

surface properly, etc. complete as directed by the Engineer-in-charge.

12 - 15 mm thick plaster - cement mortar

Providing and applying 12 to 15 mm thick plaster (smooth or wire-finished plaster) of cement

mortar 1:3 (1 cement : 3 coarse sand) finished with a trowel on any type of surface. GI hexagonal

chicken mesh of size 20 mm x 20 mm of 22 gauge and minimum 200 mm wide at RCC & masonry

junctions or between different materials and 145 GSM of minimum 150mm wide fiberglass mesh

13 with alkali resistant coating shall be fixed at chasing areas of plumbing and electrical works, at 324.00 Sqm 308.78

corners and door and window joints as per manufacturer's specifications with GI nails, hacking of

concrete/application of bonding agent, finishing, curing, making grooves, forming pattas,

scaffolding in any shape for all floors, all levels, all heights, etc. complete as directed by the

Engineer-in-charge.

Waterproofing for Toilet, Wet area, balconies & Misc. areas

Providing and applying Two-part acrylic polymer modified cementitious elastomeric waterproof

coating of minimum 1.5mm thickness DFT having minimum 1 N/mm2 tensile strength, and shall

cover 2.2 kg/sqm per mm of thickness. The coating shall have an elongation of a minimum of 80%

when tested as per ASTM D 412 resisting 5 bars hydrostatic pressure as per DIN 1048 and having

crack bridging ability of up to 2mm. Thorough surface preparation by mechanical means to level

and plain the surface of walls and floors of the toilet areas. All cracks and crevices shall be filled

and made good to receive waterproofing coating treatment The coating shall cover all the floor

area of the wet area (toilet) and shall also be applied over the vertical walls for a minimum 300mm

height above the floor in two or more coats to achieve required thickness. The periphery of the

toilet floor shall be additionally reinforced with an extra third coat of the coating with a fiber band

(glass fiber mesh of minimum 80 gsm) sandwiched between the first and the second coat, which

shall also done around protrusions (pipes) meant for plumbing purpose. The last coat (second/

third coat) when wet, shall be sprinkled with clean and washed sand, to facilitate the floor screed

Pipes being fixed for plumbing shall be fixed in holes that are mechanically core cut, more than the

diameter of the pipes. Pipes shall be fixed by grouting the annular space with non-shrink

cementitious grout of proprietary make. Before grouting, the pipes shall be wrapped with a two-

way self-adhesive tape at least 50mm wide and then grouted to fill in the grout, ensuring total

watertight plumbing fittings. The contractor shall submit a methodology statement with all details in

illustrative sketch form and get approval from the Engineer-in-charge. Application shall be carried

out by the approved applicator of manufacture and as per recommended by the manufacturer. The

actual applied area on the floor & wall shall be measured for payment. Cost includes all material

(for surface preparation, coating, and hole packing), labour, T&P, and wastage involved as

mentioned in the item.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

M25 Garede concrete screed for leveling

Supplying and laying M25 grade vibrated concrete screed in proper slope and gradient including

saw cutting (approx. 6mm W x 30mm D) at 3m x 4m panels or less size, making angle fillet of

50mm x 50mm at the corners using M25 grade concrete and filling the grooves with PU sealant

(minimum 20 mm depth over PE backer rod). If Screed concrete shall be laid over on existing

concrete surface, a bonding agent shall be applied before laying of concrete. Cost includes all

material, labour, T&P, and wastage involved as mentioned in the item. Reinforcement, if required,

shall be paid under relevant agreement items.

Total Carried Over to Summary

DOOR WINDOWS WORK

1. Only First class wood shall be used for any kind of woodwork. All wood (kiln seasoned and

termite treated) and wood base material shall be treated with anti-termite treatment as per relevant

IS before use and after installation. The guarantee shall be furnished for 10 years in the

prescribed format as directed by EIC.

2. Plywood (BWP grade IS – 710), laminate or other composite wood-based products shall be free

of urea formaldehyde.

3. All veneer, and wood shall be FSC (Forest Stewardship Council) & Green Guard Certified.

4. All loose samples of materials shall be approved by the Engineer in charge.

5. All manufactured products shall conform to Green building norms.

6. All adhesives and sealants shall be with low VOC and lead-free with acceptable VOC content

as per GRIHA requirements.

7. The contractor shall prepare a shop drawing based on the intent/ concept drawing and get

approval from the Engineer-in-Charge. The contractor shall prepare mock-up doors, windows, and

other elements with all required hardware and approved by the Engineer-in-Charge before

execution of work. Work shall be carried out as per the final approved shop drawing and approved

mock-up. The contractor shall be responsible against stability, safety, leakage, etc all complete.

Testing work shall be carried out by the Contractor as suggested by the Engineer in charge. (If

8. All types of locks shall be with computerized 3 No. keys (SS 304/ brass) and master keys (if

mentioned in the nomenclature of the item). The grouping of master keys shall be as suggested by

the Engineer-in-Charge. Nothing extra shall be payable for the master key provision.

9. The contractor shall provide test certification for all fire-rated items.

10. Contractor shall make provision for access control system and other mechanical/ automation

devices, coordinate with other services work, and make goods, etc complete.

11. All Doors, windows, and other elements shall be fabricated and finished at the factory/

workshop, and only fixing and final finishing shall be executed at the site unless otherwise

approved by the Engineer-in-charge.

12. Door, window, and other elements work shall be carried out for all floors, all levels, all heights,

and all places including loading, unloading, stacking, transporting, hoisting, and erecting by any

means (mechanical or manual).

Teak wood Frames for doors/windows etc.

Providing and fixing frames of doors, windows, transom, louvers and ventilators, jambs-sills, using

best quality kiln seasoned, termite treated first-class teak wood and fixed in position with hold fast

lugs or with dash fasteners with required dia & length of approved make, etc. for all levels, all floor,

all height, etc as per drawing and as directed by an engineer in charge.

The rate shall be inclusive of all types of consumables, accessories, fasteners, and any type of

corner treatment (i.e. chamfering, pencil corner, bevelling, moulding, etc.). Polishing, hardware,

and carving work shall be paid in relevant tender items.

The contractor shall get the approval for the loose sample of first-class teak wood along with its

source location from the Engineer in charge before execution.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Providing and fixing aluminium work for fixed partition, louvers, frame for door and window

(sliding, openable, side hung, top hung, fixed etc.), casement window, aluminium partition, fixed

window etc. with extruded built up, standard tubular sections/ appropriate Z sections, sheet, flat

bar and other sections of approved make conforming to IS:733 and IS:1285, having polyester

powder coating (minimum thickness of polyester powder coating 50 micron), fixing with SS

dash fasteners of required dia and size, including necessary filling up the gaps at all around and

both side, i.e. at top, bottom and sides; with required EPDM rubber/ neoprene gasket etc.

Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever

required including cleat angle, pressure cleat, crimping angle, aluminium snap beading for glazing/

17 panelling, SS 304 screws etc. all complete as per approved shop drawings and the directions of 712.00 Kg. 325.17

Engineer-in-charge. Rate shall be inclusive of any type of aluminium section , cutting, fabrication,

erection and fixing to thr best workmanship manner, PVC shims minimum 5mm thick, with backer

rod and silicone sealant (both side), dash fastener, etc complete. Only glazing and SS hardware

shall be paid for separately.

Contractor shall prepare shop drawing based on architectural drawing and get approval from

Engineer-in-charge before execution. Contractor shall also prepare mockup with all required

hardware as suggested and approved by Engineer-in-charge.

Providing and fixing door shutter made out of factory-made and pressed laminated/ veneer

finish 40mm thick flush door shutter excluding the thickness of veneer/ laminate, made of ISI

marked non-decorative type flush door shutters conforming to IS:2202 (Part I), the core of block

board construction with the frame of 1st class hardwood, pine filler and well matched commercial

ply veneering with vertical grains or cross bands and face veneers on both faces of shutters

having laminates/ veneer of approved make, shade, finish (which paid separately) as approved by

Engineer-in-charge on both faces of shutter fixed with phenol formaldehyde synthetic resin type

adhesive conforming to IS 848 including providing and fixing 6mm thick peripheral external lipping

made out of first class teak wood, on all edges of door shutter with specified polishing on all

18 exposed faces of lipping including fixing shutters etc complete for all levels, all floors, all heights as 15.00 Sqm 2,660.39

per drawings and as directed by Engineer-in-charge. The door shall be with a suitable acoustic

peripheral door seal and drope down door seal of approved make is included in this item.

The rate shall be inclusive of flush door shutter, teak wood lipping with PU polish, necessary

consumables, accessories, etc but excluding the cost of veneer/ laminates, all required hardware,

and polishing on veneer, etc complete for all heights as per drawing, design & direction by

Engineer-in-charge. The out-to-out area (one side) of the Flush door shutter shall be measured for

4 mm thick decorative veneer

Providing and fixing 4 mm thick decorative veneer (factory pressed with door shutter or plywood

for interior work) conforming to IS: 1328 (type-1) having the top layer of minimum 0.3 mm slice

thickness decorative veneer and base layer of approximate 3.5 mm thick BWP Gurjan Ply of

approved make, shade and pattern/ texture, for plain lining/ cladding/ ceiling work, on flush door

19 shutter, pelmet or any interior work in any design, any pattern, any shape, etc with necessary 23.00 Sqm 1,253.36

screws, adhesive including priming coat on the unexposed surface. The veneer shall be fixed on

the ply with or without groove as per drawing. The actual installed area of the veneer shall be

measured for payment.

Providing and fixing glass in the door, window, ventilation, fixed glazing, partitions, etc. for all

levels, all floors, all heights with EPDM rubber/ neoprene gasket, etc. complete as per drawings

and directions of engineer-in-charge. (Cost of beading shall be paid in basic item). Glass shall be

of any shade, any size, any shape as per approved make, sample, and drawing and confirm to

20 IS:2835 or IS:2553. The sample shall be approved before the execution of the work. The installed 5.00 Sqm 1,552.52

area shall be measured for payment without considering any wastage. In case of glass is required

to fixed using patch fitting clamps & screwes/anchor of approved make, It is included in this item.

b) With clear toughened glass panes of 8.0 mm thickness

a) With clear toughened glass panes of 12.0 mm thickness

Providing and fixing in position PVC frosted glass film of 100 to 130-micron (including adhesive)

thickness, of an approved make (of any pattern, shade, and type) on any type of glass for

internal/external use as per manufacturer's specification and as per issued drawing etc complete

22 for all levels, all floors, and all heights. The film shall be pasted on the glass without any air 10.00 Sqm 469.45

bubbles. The finished frosted film area on the glass shall be measured for payment without

wastage. Warranty shall be for a minimum of 05 years for material and installation of the film.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Cam action door closer

Providing and fixing cam action door closer of approved make with a minimum one-year guarantee

and approved finish for all levels, all floors, and all heights with controlled adjustable closing and

latching speed, with hold open feature and power-adjustable with track arm with screws to hinged

door for specified door width. All adjustment screws face fixed. The rate shall be inclusive of fixing

using the template as per the manufacturer’s specification & maintaining it in good working

23 condition. The door closer shall conform to EN 1154 standard. Selection of door closer shall be as 5.00 No. 10,214.94

per size and weight of the door, as per manufacturer's recommendation and as directed by the

Engineer-in-charge. The contractor shall arrange loose Samples for approval from the Engineer-in-

Charge before mass execution.

a) concealed door closer conforming to EN 2-4 for any type of the door, as per the manufacturer's

specifications, and/or compatible with the shutter weight.

SS 304 Butt hinges

Providing and fixing SS 304 butt hinges in matt stainless steel finish of the specified size of

approved make for all levels, all floors, and all heights of any type of door, with required SS

24 screws, etc. complete. The rate shall be inclusive of fixing as per manufacturer’s specification & 24.00 No. 299.47

maintaining it in good working condition. The contractor shall arrange loose Samples for approval

from the Engineer-in-Charge before mass execution.

b) 100 x 75 x 3 mm - With ball bearing

Mortise Deadlock for single/ double door shutter

Providing and fixing a set of mortise deadlock (without latch) for single/ double shutter door,

including strike plate SS 304, and prepared for 60/70 mm length of standard euro profile pin

cylinder as per DIN 18251-1, grade 2 of approved make with both side key/ one side key one side

knob/ one side key one side slot operation with pair of SS 304 escutcheons (keyhole plate) in matt/

25 satin finish as per approved shape for wooden/ aluminium doors with necessary SS 304 screws,

etc complete as per drawing and sample approved by Engineer-in-charge.

The rate shall be for all heights, all floors, and all places. The lock shall be with 3 number

computerized keys. The contractor shall arrange loose samples for approval from the Engineer-in-

Charge before mass execution.

Mortise sash lock with lever handle

Providing and fixing a set of mortise sash lock with SS 304 pair of Mortise lever handle with a cap

of any shape, and size in matt/ satin finish for single/ double shutter doors, including strike plate

SS 304, and prepared for 60/70 mm length of standard euro profile pin cylinder as per DIN 18251-

1, grade 2 of approved make with both side key/ one side key one side knob/ one side key one

side slot operation with pair of SS 304 escutcheons (keyhole plate) in matt/ satin finish as per

26 approved shape for wooden/ aluminium doors with necessary SS 304 screws, etc complete as per 2.00 Set 1,837.95

drawing and sample approved by Engineer-in-charge.

The rate shall be for all heights, all floors, and all places. The lock shall be with 3 number

computerized keys. The contractor shall arrange loose Samples for approval from the Engineer-in-

charge before mass execution.

SS 304 Grade Push-Pull handle (for any type of shuter i.e. glass/Flushdoor/aluminium

Providing and fixing SS 304 grade push-pull pair of handle in matt finish of the specified size,

specified shape i.e. H-shape/ D-shape/ offset shape (dent free at bending point)/ or reference

image for any type of the door, etc. of approved make for all levels, all floors, and all heights with

required SS 304 screws, accessories, and pin of the required size for fixing, etc. complete. The

rate shall be inclusive of fixing as per manufacturer’s specification and maintaining it in good

working condition. The contractor shall arrange loose Samples for approval from the engineer-in

charge before mass execution. Overall length of handle shall be considered.

a) 300 mm long as per reference image x 1mm (thickness of pipe)

28 c) 600 mm long as per reference image x 1mm (thickness of pipe) 3.00 Pair 2,703.37

SS 304 Tower bolt

Providing and fixing SS 304 grade tower bolts of the specified size, and specified shape (with or

without flap) in matt/ satin finish for the door, window, transom, etc. of approved make for all

levels, all floors, and all heights of any type of door, with required SS 304 screws and accessories

of the required size for fixing, etc. complete. The rate shall be inclusive of fixing as per

manufacturer’s specification and maintaining it in good working condition. The contractor shall

arrange loose Samples for approval from the Engineer-in-Charge before mass execution.

C) 450 mm x 10 mm rod size

Iteam No. Item Description Quantity Unit Amount (in Rs.)

SS 304 door stopper

Providing and fixing SS 304 door stopper with or without magnet, lever type, shutter mounted/ wall

mounted/ floor mounted in matt/ satin finish as per approved design, approved make and

approved shape of for the door, window, transom, etc. for all levels, all floors, and all heights of

any type of door, with required SS 304 screws and accessories of the required size for fixing, etc.

complete. The rate shall be inclusive of fixing as per manufacturer’s specification and maintaining

it in good working condition. The contractor shall arrange loose Samples for approval from the

Engineer-in-Charge before mass execution.

Shaft door lock

Providing and fixing shaft door lock with key (Alen Key lock) with Escutcheons (keyhole plate),

strike plate, locking sleeve, etc in stainless steel matt finish of approved make in any approved

shape/size for any type of doors with necessary SS 304 screws, etc complete as per drawing and

sample approved by Engineer-in-charge. The rate shall be for all heights, all floors, and all places.

The contractor shall arrange loose Samples for approval from the Engineer-in-Charge before

mass execution.

Providing and fixing SS 304 grade handle in matt finish of specified size, specified shape for door,

window, etc. of an approved make for all levels, all floors, and all heights for any type of door, with

required SS 304 screws, accessories, and pin of the required size for fixing, etc. complete. The

rate shall be inclusive of fixing as per the manufacturer’s specifications and maintaining it in good

32 working condition. The Contractor shall arrange loose samples for approval from the Engineer-in- 1.00 No. 405.16

Charge before mass execution.

a) Flush handle/ concealed handle - 150 mm long Flush Handle - Concealed handle recessed in

the depth of the shutter with pull arrangement for shutter, as per approved design and shape

Aluminum powder coated Multi point lock with (without locking arrangement)

Providing and fixing Aluminum powder coated multi point lock with mortise handle/ inbuilt flush

handle (without locking arrangement) in approved finish, color, and shade of the required size and

capacity of approved make for internal/external shutter as per approved sample with necessary

SS 304 screws, handle, connector, extension, nib, nib holder, counter plate, fork, pawl, polyamide

strip, connection pin, rod terminal, locking point, striker and corner transmission etc. complete for

33 all levels, all floors, and all heights as directed by Engineer-in-charge. 26.00 No. 2,650.19

The rate shall be inclusive of fixing as per manufacturer’s specification & maintaining it in good

working condition. The contractor shall arrange loose Samples for approval from the Engineer-in-

Charge before mass execution.

b) For aluminum hinged door and window shutter (top hung or side hung)

Providing and fixing adjustable/ fixed Teflon roller bearing set with reinforced nylon casing of

approved make (twin or single wheel according to weight and size) for sliding window/door as

34 per drawing etc. complete for all floor, all height, all level as per approved sample and as directed 50.00 No. 211.04

by engineer in charge.

Total Carried Over to Summary

FLOORING AND DADO/CLADDING WORKS

1) All natural stones shall be free from cracks, lines, stains, and white spots of efflorescence, and

even in shade for all kinds of stonework.

2) All natural stones shall be selected and sorted for uniform colour, figure, and thickness and

approved by Engineer-in-charge prior to procurement.

3) All natural stones shall be from the same lot and/ or source (stone quarry) for the same kind of

work to avoid shade variation and as approved by the Engineer-in-charge.

4) All types of loose and laid samples of flooring shall be approved by the Engineer-in-charge.

5) The contractor shall apply approved Stone Impregnation primer/ sealer coat on both sides and

all edges (after cutting and finishing the stone as per size) of stones in a minimum of two coats as

per the manufacturer's specification and as directed by the Engineer-in-charge. No extra shall be

paid for the same.

6) Contractor shall co-ordinate and execute for all services in flooring and wall lining/ cladding

work i.e. making openings/ cut-outs for any services (i.e. elevator operating panel in lift wall

cladding, raceway in flooring, junction box, etc), and making good as per the satisfaction of

Engineer-in-charge.

7) All stones shall be cut to size with the help of with water jet cutting/laser cutting/ CNC machine

according to the design and shape for best workmanship etc according to the design as per the

approved shop drawing.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

8) All adhesives and sealants shall be compatible with material as per IS 15477 and as per the

manufacturer's specification and with low VOC and lead-free with acceptable VOC content as per

Green building requirements.

9) Finished floor surfaces shall be protected with a 12mm thick POP sheet over an LDPE sheet up

till handling over the project. The tread of the stair shall be protected with a metal/ plywood angle

to avoid damage to the edges of the tread. POP shall not directly (or with the use of paper) apply

10) Screed below flooring/ base mortar thickness shall be as per drawing. In case of any type of

stone/ tile shall be fixed with adhesive and the total thickness of base mortar/ screed shall be paid

in relevant tender items.

11) All stone shall be factory cut and factory finished. Polish or any type of texture finish on any

stone shall be as per the satisfaction of the Engineer in charge.

12) Flooring and wall cladding/ lining work shall be carried out for all floors, all levels, all heights,

and all places.

15) Rate shall be inclusive of all types of wastage of all material.

Vitrified tiles - For flooring - fixing with cement mortar

Providing and laying Vitrified tiles (superior quality tiles) with water absorption less than 0.08% and

conforming to IS: 15622, of specified sizes, specified thickness, approved make, any finish (anti

skid/ satin/ polished etc), any shade, any color, and any shape for flooring in required design and

patterns as per the drawings, laid over average bedding 40 mm thick cement mortar 1:4 (1

cement: 4 coarse sand), jointed with a groove or without groove with grey/white cement slurry

mixed with a pigment to match the shade of the tiles, including finishing, cleaning, protection,

scaffolding, wastage, etc. all complete for all levels, all floor, all height, as specified and as

directed by the Engineer-in-Charge.

Rate shall be inclusive of vitrified tile (as per approved sample), fixed with cement mortar bedding,

cement slurry, matching pigment, all labour etc complete but excluding filling with epoxy grout (if

required) and additional cement mortar bedding/ concrete screed bedding as per drawing which

shall be payable under relevant Tender item. The contractor shall arrange loose Samples for

approval from the Engineer-in-Charge before mass execution.

The actual laid area of the vitrified tiles shall be measured for payment without considering any

a) With full body, homogeneous, vitrified tile of size 600 x 600 mm x minimum 9mm thick

Vitrified tiles - For dado/ riser/ skirting fixing with adhesive

Providing and laying Vitrified tiles of specified sizes, with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, shade and finish (matt/ satin/ polished etc) in wall tile/

dado, riser of steps, and pillars laid in any pattern over any type of levelled surface, in any pattern

with suitable cement based high polymer modified quick set tile adhesive (water based)

conforming to IS: 15477of approved make and jointed with groove or without groove with cement

slurry mixed with pigment to match the shade of the tiles, including providing 6 to 10mm wide

36 groove between wall tiles and plaster edge treatment, rubbing, curing, finishing, cleaning, 29.00 Sqm 1,174.68

protection, scaffolding and wastage etc. all complete as specified and as directed by Engineer-in-

Charge. Length of tiles for dado shall be as per design to match the joint and pattern. Shade of

dado must be match with flooring stone.

Rate shall be inclusive of vitrified tile (as per approved sample), adhesive for fixing, cement slurry,

matching pigment, all labour etc complete but excluding filling with epoxy grout which shall be

payable under relevant item.

a) With full body, homogeneous, vitrified tile of size 600 x 600 mm x minimum 9mm thick

Grouting the joints of flooring/ wall tiles/ stone

Extra for Providing and Grouting the joints of flooring/ wall tiles/ stone as specified having joints of

up to 5 mm width in total thickness, using epoxy grout of approved make and shade including PVC

37 spacer, filling/ grouting, protecting tile, abro-tap and finishing complete as per direction of Engineer- 62.00 Sqm 190.84

a) Tiles/ stone of any size

Additional Floor bedding with Cement mortar :

Providing and laying cement mortar 1:4 (1 cement : 4 coarse sand) for additional thickness below

flooring item required for gradient and as per drawing and as directed by engineer in charge

38 including spreading as per gradient, levelling, finishing, curing etc complete as directed by 13.00 Cum 3,991.67

Engineer in charge. Actual laid volume for floor bedding shall be measured for payment without

considering any wastage.

Engineered Wooden flooring and skirting

Providing and fixing 3 layered 12 to 15mm thick Engineer wooden flooring and skirting of approved

type, any shade/ wood species and of approved make, in required pattern and as per

manufacture’s specification confirming to British Standards BS EN 13489. Top layer of plank shall

be made of minimum 3.0 mm natural wood/ veneer of any shade, finish, pattern and texture.

Surface of top layer shall be pre finished with several layer of UV hardened Acrylic lacquer, which

39 shall be free from urea formaldehyde and solvents. Flooring plank shall be interlocked using lock 113.00 Sqm 6,991.37

and fold system in a glue less floating manner. Engineered wood planks shall be a composition of

layers of Pine wood with direction of each layer oriented at right angle to the adjacent layer of

natural strain in lacquer and non bevelled/ bevelled in length and width as specified. Wooden

flooring shall be FSC (Forest Stewardship Council) & Green guard certified.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Rate shall be inclusive of min 2mm thick underlay sheet as sound barrier and/ or vapor barrier

(combination of PE film and extruded foam) and all the accessories like edge strip, joining strip,

quarter strip, moulding strip, end strip, corner strip, skirting, threshold etc. required as per design.

Uniform gaps shall be left on all sides to allow expansion and contraction of material. The gaps are

covered with the help of accessories etc. finished in all respects as per the manufacturers

specifications.

Rate shall be inclusive of making any cut-out for services, floor matching cover over cut outs etc.

complete. The contractor shall get approval of sample and pattern from Engineer in charge before

execution. Area of flooring and skirting including accessories (without considering any wastage)

shall be measured for payment.

18 mm thick granite vanity/washbasin counters and facias:

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and pre-polished,

machine cut granite of any size, any shape, any shade, for vanity/ wash basin counters and

fascias, and similar locations, of required size, approved shade, colour and texture, laid over

mm thick cement mortar 1:2 (1 cement : 2 coarse sand) base, joints treated with white cement,

mixed with a matching pigment, epoxy touch ups, including making all holes & cutouts for SS sink,

40 wash basin, piller tap/ bib cocks, rubbing, curing, rounding edges, champhering and polishing to 2.00 Sqm 1,889.10

edges, to give a high gloss finish etc., complete, at all levels, as directed by the Engineer-in-

Charge. The plan area of the counter and the elevation area of the facia shall be measured for

If required, metal framing/supports shall be paid in relevant Tender items..

Total Carried Over to Summary

FALSE CEILING WORK

Notes for False ceiling work

1. Points to be taken care of by contractor before selecting a manufacturer from approved

• Board/ tiles/ panel, grid system, suspension system and all accessories shall be from a single

vendor and from the same make unless otherwise approved by Engineer-in-charge.

2. Points to be taken care of by contractor before installation

• Contractor shall corelate all services drawings from different installers and prepare a clash free

shop drawing as per architectural drawings for RCP, with all services integration vis a vis HVAC,

FFTG, PLUMBING, ELE, ELV & any other services planned and part of design.

• The methodology statement for execution of all services coordinated with ceiling execution shall

be submitted by Contractor for approval of Engineer-in-charge before commencing execution

• Quality check and sequence of execution along with relevant documentation to be ensured by

the site project team for inspection and quality checks.

• Installation to be carried out by an approved and certified installer of manufacturer. Contractor to

submit manufacturer approved certificate of installer to Engineer-in-charge before commencing

3. Points to be taken care of during installation

• False ceiling work to be strictly supervised for alignment, line & level and overall quality of

installation and contractor to strictly follow approved methodology statement.

• False ceiling suspension work shall be strictly from mother slab or secondary support installed

for false ceiling and not from any other services suspension members.

• Trap door to be fixed in line & level with false ceiling, with separate suspension system from

mother slab, not with false ceiling member. Groves around trap doors should be uniform on all

• All service equipment & light fixtures, curtains etc to be fixed with a separate suspension system

from mother slab, not on false ceiling tile or false ceiling member.

• In gypsum ceiling, contractor shall provide perimeter channel at periphery of all services cutout

for strengthening the system. All cutout in board shall be finished with tape, angle skimming coat

etc as per manufacturer's specification.

• If required, additional supports to be provided for fixing the false ceiling (in case of special shape,

more height etc).

Iteam No. Item Description Quantity Unit Amount (in Rs.)

• In case the height of suspension system is more than recommended by manufacturer, separate

MS work to be provided from mother slab and false ceiling to be suspended from MS work. Design

and shop drawing for MS fabrication work and connections with structure members shall be

submitted by contractor for approval by Engineer-in-charge. MS frame work to be designed to

accommodate other services if required to be submitted on the same frame. Such MS frame work

shall be paid under relevant tender item.

• Sequence of execution of different services to be aligned with RCP to avoid any rework.

• Movement joints/ groove to be provided in board or grid ceiling system in large span area.

4. Points to be taken care of post execution

• Warranty for false ceiling system to be provided by installer & manufacturer to ensure that work

is completed as per specification (material and workmanship) and methodology statement.

• Completion certificate to be provided by installer & to be signed and verified by manufacturer

with respect to tender specifications and approved shop drawing.

• All test reports are to be submitted by the contractor for performance.

5. General Notes

• Contractor to quote the rate considering all points mentioned in the specifications.

Gypsum False ceiling:

Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 150 gms/

sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the

ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed

to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and

other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made

out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed

to wall/partition with the help of raw plugs at 450 mm centre, with 25mm long dry wall screws @

230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the

help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a

flush finish of tapered and square edges of the board with recommended jointing compound,

jointing tapes, finishing with jointing compound in 3 layers covering up to 150 mm on both sides of

joint and two coats of primer suitable for board, all as per manufacturer's specification.

In False ceiling, drop-down patta (vertical) more than height/ width of 300 mm shall be measured

and paid. The rate shall also include the cost of making openings for light fittings, grills, diffusers,

and cut-outs made with a frame of perimeter channels suitably fixed, all complete as per drawings,

specifications, and direction of the Engineer in Charge but excluding the cost of putty and painting.

Installation shall be carried out by an approved installer and the material of the suspension system

shall be as per manufacturer specifications.

The contractor shall prepare a shop drawing with coordination of all services and opening/ excess.

Sample, shop drawing, and mock-up shall be approved by the Engineer in charge. The actual

41 installed area in the plan and area for vertical drop down more than height/ width of 300 mm shall 101.00 Sqm 1,133.17

be measured for payment without considering any wastage and without deductions of area for

lights, diffusers, columns, etc. Nothing extra shall be paid for making provisions for lights,

diffusers, AC grills, fire alarm systems, sprinkler systems, and other such fittings/ services in false

ceiling. Work shall be carried out as per the approved sample, Mock-up, and shop drawing

including all material and labour.

b) 12.5 mm thick Fire resistant Glass Reinforced Gypsum (GRG) Boards (Confirming to BS476)

complying to IS: 2095 :

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 %

perforated area with perforation size and pattern as approved by the Engineer-in- charge and as

42 per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC 31.00 Sqm 1,300.17

value not less than

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Mold resistance paperless Gypsum Ceiling

Providing and fixing a suspended ceiling system using a minimum 12.5 mm thick paperless,

modified glass fibre reinforced gypsum core board with enhanced moisture and mould resistance

as per EN 15283 Part-1. The board shall have a thermal conductivity of 0.3 W/mºK, thermal

resistance of 0.042 m²K/W, and conform to ASTM D3273 for mould resistance and EN520 Type

H1 for water resistance. The board shall have square or tapered edges on all four sides.

The suspension and grid system will be constructed from GI (IS-513), with a yield strength of

MPa, finished with a 150 GSM galvanized coating as per IS-277. The sections will feature a

serrated, knurled, chequered, or ribbed pattern. A 0.5 mm perimeter channel will be fixed along the

perimeter of existing walls using 6x40 mm impact anchors of an approved make at 600 mm

centres. A 0.5 mm ceiling angle will be suspended by attaching it to a soffit cleat, made of CR1

grade (IS-513) material, with a zinc coating of 7 to 8 microns and a pull-out load capacity of 6.8 kN.

This setup will create a 1200 mm x 1200 mm grid.

The intermediate channel, 0.9 mm thick, will be secured to the ceiling angle using an M6 x 12 mm

hex nut and bolt arrangement (material as per EN 10083, finish: zinc plating) or with 2 no. Ø4.2x13

metal-to-metal screws made of carbon steel as per EN-ISO 7049/50 with a minimum 4-micron zinc

coating. The ceiling section will then be fixed to the intermediate channel using connecting clips

made from high carbon spring steel wire (BS970 Gr. En 42, 46-48 HRC, finish: zinc plating 4-6

microns) and positioned perpendicularly to the intermediate channel at 600 mm centre-to-centre

Single-layer gypsum boards shall be secured to the ceiling section using 25 mm drywall screws

made of carbon steel (EN-ISO 7049/50). The joints shall be finished with a jointing compound,

recommended filler, jointing tapes, and finisher conforming to ASTM C475, to achieve a flush

appearance. The finishing process shall include two coats of primer suitable for the board, as per

the manufacturer’s specifications. The cost shall include making openings for light fittings, grills,

diffusers, and other cut-outs, framed with perimeter channels and fixed as per the drawings,

specifications, and directions of the Engineer in Charge, but excluding the cost of putty and

For false ceilings with drop-down pattas (vertical elements) exceeding a height or width of

mm, measurements and payment will be based on the actual installed area. The rate shall include

the cost of creating openings for light fittings, grills, diffusers, and other fixtures, framed with

perimeter channels and installed according to the drawings and specifications and as directed by

the Engineer in Charge. The cost excludes putty and painting.

The Contractor shall prepare shop drawings in coordination with all services, including provisions

for openings and access. Samples, shop drawings, and mock-ups must be approved by the

Engineer in Charge. Payment will be made based on the actual installed area, including vertical

drop-downs exceeding 300 mm, without accounting for any wastage or deductions for lights,

diffusers, columns, etc. No additional payment shall be made for making provisions for providing

lights, diffusers, AC grills, fire alarm systems, sprinkler systems, and other fittings/services.

Access panel/ trap door

Providing and fixing ready-made powder coated Access panel/ trap door of approved make of

600x600mm size for any height as per drawing including aluminium outer and inner frame, door

shutter, push latch, safety cable and hook, removable hinge, intermediate and perimeter channel

etc for all floor, all height etc complete as directed by engineer in charge. Tile/ board of access

panel shall be matched with false ceiling board. The contractor shall submit the technical data

sheet of the product regarding loading capacity to the engineer in charge. A loose and installed

sample/ mock-up of the access panel shall be approved by the engineer in charge.

The contractor shall prepare a shop drawing based on the concept drawing including fixing

44 arrangements, and services, and prepare a mock-up of the required area. As per the approved 2.00 No 1,872.84

shop drawing and mock-up, the contractor shall start the work.

The access panel system shall be fixed on any type of surface i.e. RCC, metal work, etc) with the

required capacity of anchorage as per the manufacturer's specification.

The contractor shall provide a fixing arrangement with an adjoining false ceiling and the bottom of

the slab. The stability of the access panel system shall be the responsibility of the contractor.

Total Carried Over to Summary

WALL PANELLING WORK/CURTAIN WORK

Iteam No. Item Description Quantity Unit Amount (in Rs.)

1) Contractor shall prepare shop drawing based on concept drawing/ design for all false ceiling,

panelling and partition work co-ordinate with services and get approved by Engineer in charge

before execution of work.

2) All veneer and wood shall be FSC (Forest Stewardship Council) & Green Guard Certified.

3) All Manufactured products shall be with at least 5% recycled content.

4) Sample of all loose material and mock-up shall be approved by Engineer in charge.

5) Any wood/ wood base material / plywood / MDF Board shall be treated with antitermite

treatment as per relevant IS before use. Rates are inclusive of anti-termite treatment of all such

6) Contractor shall co-ordinate for all services in wall panelling/ ceiling work i.e. making openings

for light fittings, switch board, electrical points, grills, diffusers, cut-outs for any services, provision

of addition framing member for strengthen, making good as per satisfaction of Engineer in charge.

7) All elements shall be factory fabricated and finished, only final finishing to be made on site with

all precautions.

8) Contractor shall coordinate all services work (cutouts and provisions) in all type of wall

panelling, false ceiling, partition, pelmet and other interior work. All cutout and services provisions

shall be finished at factory/ work shop.

Providing and fixing 12 mm thick plywood BWP grade (IS – 710) of approved make having, a

density minimum 600 Kg/m3, emission levels as per E-1 formaldehyde, for wall panelling/lining/

cladding/ False ceiling work, pelmet or any interior work in any design, any pattern, any shape with

necessary screws, for all height all level, etc complete as directed by Engineer-in-Charge. The rate

shall be inclusive of 6mm thick peripheral beading all around to ply (width of beading as per ply +

finish surface) as per drawing.

Veneer/ laminate or any other finish shall be paid in the relevant tender item. Out to out Area of

installed plywood shall be measured for payment without considering any wastage.

1 mm thick laminate

Providing & Fixing 1 mm thick high pressure (factory pressed) laminate sheet of any type, any

finish, any shade, any texture of approved make and shade with high-density protective surface

layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost

46 of adhesive of approved quality. Laminate shall be applied on the door shutter, wall paneling, 26.00 Sqm 647.56

ceiling, or any interior work, etc. The sample shall be approved by the Engineer-in-charge. The

actual installed area of the laminate shall be measured for payment.

Veneer Panelling

Providing and fixing Veneer Panelling/patta as per concept design/ drawing and as per the

following specifications:

1) Aluminium framing system for panelling shall be installed on any surface with the required size

and type of anchor fasteners of an approved make, with aluminium sections of approved make,

conforming to IS: 733 and IS: 1285; of required size and thickness at a maximum distance of

600mm c/c in both directions. All aluminium member shall be anodized finished of an approved

make and shade (anodized transparent or dyed to required shade according to IS: 1868, Minimum

anodic coating of grade AC 15). The aluminium quality shall be as per grade 6063 T6 and BS

2) 12mm thick, BWP grade (IS – 710) plywood shall be fixed with aluminium framing with the

required fixing arrangement and shall create the required shape, size and pattern in true line and

47 3) 4mm thick Gurjan ply veneer having a slice thickness of 0.5mm of an approved make and 13.00 Sqm 5,114.39

shade shall be fixed on plywood in the required pattern as per concept design/ drawings. Veneer

sheet shall be of approximate size 3048 x 1220mm (10' x 4’).

4) First class teak wood skirting and beading of required size shall be fixed on the ply surface with

required adhesive, nails, screws etc., as per the concept design/ drawings

5) All exposed veneer and wooden surfaces shall be finished with an exterior grade water base

Polyurethane (PU) clear matt finish/ glossy finish/ semi gloss finish polish of an approved make

and shade including surface preparation, base coat of wooden primer, stainer coat of approved

shade (if required), minimum 3 coats of PU polish followed by sandpapering with fine sandpaper

up to minimum 400 micro grit-sized sandpapers and up to satisfaction of Engineer-in-Charge.

6) Provision of fixing hanging shall be included and to be shown in shop drawing for fixing like

logo/frames/storage units/artworks etc.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

7) The wall panelling shall have provision of solid wood framework above the shelf to hang the

8) MEP services to be coordinated as per site conditions and drawings.

The Contractor shall prepare and submit a shop drawing that coordinates all services based on

the concept design and approved drawings. This submission must include detailed design

calculations for approval by the Engineer-in-Charge. The rate shall be inclusive of the aluminium

framing, plywood, veneer, wooden skirting, PU polish, designer cutting in the required shape, size

pattern, edge beading, arrangement for lighting and other services, hardware, adhesives,

accessories, anchors, fasteners, scaffolding, wastage, etc complete, for all levels, all height, all

floors as directed by Engineer in charge. A mock-up shall be carried out as per the approved shop

drawings. Work shall be carried out as per the approved sample, mock-up, and shop drawing

including all material and labour. The actual installed area in the elevation shall be measured for

payment without considering any wastage and without deductions of areas for any type of service

elements. No additional payments shall be made for provisions for fittings/services.

Fabric & acoustic panel wall panelling

Providing and fixing minimum 25mm thick Acoustic and Sound Absorption Panel System, of the

required size, manufactured from 100% polyester fibers/ polypropylene/ polyethylene terephthalate

panel Fibers Needle punched and thermally bonded in a non – woven matrix semi rigid specifically

tooled and pressed for maximum sound absorption, with minimum 80% NRC (0.80 NRC) and

meets the British Fire Rating Standards BS 476 standard Class 1Y, Class P, Fire Propagation

index = 9.2, with 0.006% moisture absorption (will not rot or smell) in grey or/ and white colour

fibers, which is UV stabilized, non-allergic and non toxic as per concept design/drawing and as per

the following provisioned:

1) A Paneling shall be installed on the required Metal/Aluminium framing system. The aluminum

quality shall be as per grade 6063 T6 and 6062 T6, 6061 T6 and comply to BS 1474. Framing

48 shall be fixed on any surface i.e masonry, stone, RCC, metal, der wall etc. 22.00 Sqm 5,761.09

2) Required thickness plywood, BWP grade (IS – 710) plywood shall be fixed with metal framing

with the required fixing arrangement in the required shape, size, and pattern.

3) Acoustic Panel System shall be fixed on the required thickness of plywood and metal framing

work (any type), which shall be fixed into the wall and shall create a true line and level with screws,

fixed horizontally or vertically as per design/drawing.

4) Acoustic and Sound Absorption Panel System shall be covered with a tightly stretched open cell

fabric over the entire panel including all sides. Designer Fabric with acoustic and fire retardant

properties of approved make and shade and selection as per approved sample shall be covered

on the acoustic panel for wall paneling work in the required pattern as per drawing with all

necessary stitching, adhesives, screws etc.

5) The acoustic panel with fabric shall be fixed with teak wood beading/lipping if required as per

6) All exposed surfaces of wooden shall be External grade water based PU polished as per

The contractor shall prepare a shop drawing coordination of services based on the concept design

and drawing and submit it along with the design calculation for approval from the engineer in

charge. The rate shall be inclusive of acoustic fabric panel, metal framing, plywood, teak wood

beading, designer cutting in the required shape, size pattern, edge beading, PU polish, Teak wood

lipping/bedading as per design intent, arrangement for lighting and other services, hardware,

accessories, anchor, fastener, adhesives, scaffolding, wastage, etc complete for all levels all

height, all floors as directed by Engineer in charge. A mock-up shall be carried out as per the

approved shop drawing. Work shall be carried out as per the approved sample, Mock-up, and

shop drawing including all material and labour. The actual installed area in the elevation shall be

measured for payment without considering any wastage and without deductions of area for lights,

diffusers, columns, etc. Nothing extra shall be paid for making provisions for providing

fittings/services.

Solid Wooden batten + Ply+Veneer paneling

Providing and fixing solid wooden batten acoustic wooden paneling as per concept design/drawing

and as per following provisioned:

1) A Paneling shall be installed on the required Metal framing system.

2) 19mm thick veneer finish plywood, BWP grade (IS – 710) plywood shall be fixed with metal

framing with the required fixing arrangement in the required shape, size, and pattern.

3) 4mm thick Gurjan ply veneer having a slice thickness of 0.3mm of approved make and shade

shall be fixed on plywood (factory pressed) in the required pattern as per concept design/drawing

with teak wood beading at the end of the panel of the required size.

4) Perforation shall be made in a pressed sheet of ply and veneer

49 with a cutting machine in a good finish wherever required to achieve acoustic properties. 16.00 Sqm 7,103.33

5) Finished 25mm x 40mm size Superior class teak wood strips/ battens @ 50mm c/c shall be

fixed on veneer-finished plywood panel as per drawing and shall create a true line and level with

required screws, nuts, fastener, adhesive, etc complete. The length of batten shall be as per the

approved drawing for joint.

6) Glass wool shall be laid in paneling for acoustic purpose.

7) All exposed surface of wooden and veneer shall be polished as per specification. Elevation

area of panelling shall be measured for payment without considering any wastage.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

The contractor shall prepare a shop drawing coordination of services based on the concept design

and drawing for approval from the engineer in charge. The rate shall be inclusive of plywood,

veneer, teak wood batten, Glasswool, perforation making, designer cutting in the required shape,

size pattern, edge beading, arrangement for lighting and other services, hardware, accessories,

adhesives, anchor, fastener, scaffolding, wastage, etc complete for all levels all height, all floors

as directed by Engineer in charge. A mock-up shall be carried out as per the approved shop

drawing. Work shall be carried out as per the approved sample, Mock-up, and shop drawing

including all material and labour. The actual installed area in the elevation shall be measured for

payment without considering any wastage and without deductions of area for fittings/services.

Mirror with aluminum frame:

Providing and fixing 6mm thick superior quality wall hung mirror with modular aluminium frame.

Mirror shall be extra clear, decorative type, best quality, bevelled edge at the periphery and of an

approved make, in any shape and size.

The aluminium frame shall be up to 100mm wide, extruded type, with anodized finish of an

approved make in any shape and shade.

The backing of the mirror shall be 8mm thick cement bonded particle board/fibre cement board/ IS

50 710 Marine Ply and fixed with silicon sealant/double sided tape to the mirror. 3.00 Sqm 4,010.71

The mirror assembly shall be with a floating hanging system with required hanger, Z bar or french

cleat etc., complete, in proper plumb and level etc. for all floors, all levels, all heights as directed

by the Engineer-in-Charge. The rate shall include the mirror,cement fiberboard, anodised

aluminium framing, including adhesive, double sided tape, screws, fasteners and all required

accessories. Out to out area of the mirror with the aluminium frame shall be considered for

payment without any wastage.

MDF Molding Patti

Providing and fixing approximate 25mm thick moulding patti made of MDF board of approved

make, fixed on masonry wall/ plywood/ RCC surface/ ceiling/ gypsum surface etc. Moulding patti

shall be in linear or curvature shape as per design/ drawing. Moulding shall be in tapered, circular

or any other shape in desired design and size with carving work (to create a design) as per

drawing. Moulding shall be fixed on levelled surface with adhesive, nails, wooden joints, SS

screws with out appearing any impression in vision. Location of joint in moulding patti shall be as

per design and as suggested by engineer in charge. Exposed surface offinished with water base

acrylic/ PU coating of approved make, shade and finish.

Contractor shall prepare shop drawing base on concept design and get it approved before starting

the work. Rate shall be inclusive of material, labour, finishing, wastage, fixing accessories,

scaffolding etc complete for all height and as directed by Engineer in charge. Sample and mock-up

shall be approved. Elevation of area of finished moulding shall be measured for payment.

Letter Mount Signage, Logo & Map signage

Providing and fixing Cut Letter Sign, Logo & Map of specified/required size as per design intent in

any languages, any font style as per concept design/ drawings, cut / routed from approx 2 mm thk

MS plate of variable size as per artwork/content schedule on any type of

surface(metal/masonry/stone/RCC or any other material in any shape) with anchor fastener of

required capacity and make or by any other means as per desig inent, at any level any height.

fabricated using water jet, CNC cutting machine, machine bending or by any means as required.

The top surface of the cut / routed letter/signage element to have a chamfer edge/rounded corner

as per the design intent. signage to be fixed and secured with 304 grade SS M5 grub screws on

304 grade SS required capacity stand-off pins anchored to mounting surface and with partially

threaded required length 304 grade SS studs using silicone caulk, on the mounting surface, as per

design intent. Letter, stand-off pins, studs, SS bolts, and fasteners to be finished with PU paint in

the required colors as specified in the final artwork/content schedule as per approved make.

Mounting of signage to be done using appropriate reusable templates,made in suitable material as

per requirement, with locations of studs, for drilling holes on the mounting surface, as per

artwork/design intent/content schedule. The loose sample of stone and laid mockup shall be

approved by the Engineer-in-charge before mass execution. The Architect and the Engineer-in-

charge reserves the right to reject part or all of the work if it is substandard not as per the

approved sample or per mock-up or does not confirm to the approved sample/mock-up. Content

of sign shall be letters (in any language), number, graphics/ maps, signs, arrows, etc. in any colour

as per design, drawing and approved by Architect and Engineer. The rate shall also include cost of

scaffolding, drilling, fabrication, finishing, adhesive material, back and sides plain cap sheet, fixing

charges, accessories, anchor/fastner etc at all height and all lead. Contractor shall prepare shop

drawing based on concept design, including it's fixing arrangement with back structure/ back

surface integrated with wall finishing work, all services work (i.e. lighting work). Sample and mock-

up shall be approved before mass production and execution. Stability of fixing for signage and

logo shall be responsibility of contractor. The contractor shall submit the drawings with as per

design intent before execution. Outer most dimension of the letters shall be measured for payment

and Elevation area of MS logo and Map shall be measured for payment.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Providing and fixing SS 304 grade brush finish 1.0 mm thick Internal signage of any shape any

size and in any language like Gujarati, Hindi and English with letter, numbers, graphic, arrow,

symbol etc made by etching with duco paint/ laser print or vinyle sticker with lamination of

approved shade. All signage plates shall be made in CNC water jet cutting, with all smoothen

edges and pencil round corner. Signage matter shall be as per drawing. The plate shall be fixed on

53 brick masonry or RCC wall/ door with the necessary fixing like stud, fastner, self adhesive or 8.00 Sqm 18,558.75

adhesive etc complete for all floor all height as directed by Architect and Engineer in charge. The

rate shall be inclusive of all material, labour, drilling, fasteners/ adhesive, scaffolding etc. at all

heights. Only elevation area shall be measured and paid. The contractor shall submit the shop

drawings based on concept design and prepare the sample and get it approval before execution.

Total Carried Over to Summary

PAINTING/POLISHING WORKS

1) All adhesives, sealants & paint shall be water based, with low VOC with acceptable VOC

content as per Green Building Norms requirements and lead free.

2) Paint shall be applied after thoroughly brushing the surfaces, free from mortar dropping and

other foreign matter, preparing the surface even and sand papered smooth etc, after applying

every coat of putty and primer complete.

3) Contractor shall furnish warranty paper, wherever applicable.

4) If necessary more coats shall be applied till the surface presents a uniform appearance without

any extra cost.

5) Paint shall be applied with any means (i.e. brush, roller, spray etc)

6) Contractor shall prepare sample of minimum three shades as suggested by engineer in charge

7) The rate shall be applicable for all floor, all level, all height by any means of scaffolding.

White cement-based putty

Providing and applying white cement-based putty of average thickness 1 mm, of approved make

54 and manufacturer, over any surface to prepare the surface even and smooth complete for all floor 571.00 Sqm 81.31

all height all levels.

Providing and applying priming coats with the primer of approved make and manufacture, having

low VOC (Volatile Organic Compound) content, Modified acrylic, water-based alkali-resistant

primer with low VOC over any surface to complete for all floors all heights all levels.

Acrylic emulsion paint - interior grade

Providing and applying premium acrylic emulsion paint (superior quality) of interior grade Two

coats of interior grade premium acrylic emulsion paint of approved make and shade with highly

washable, Anti fungal, anti bacterial, scratch resistant and scrub resistance property, having VOC

(Volatile Organic Compound) content less than 50 grams/ litre of approved make, on wall/ ceiling/

false ceiling/ partition etc including applying additional coats wherever required to achieve desired

even shade and colour.

PU polish - for external/internal wooden & veneered surfaces:

Providing and applying interior/exterior grade water-based polyurethane (PU) polish of any shade

and finish (matt, glossy, or semi-glossy) of an approved make on new or existing external and

internal wooden and veneered surfaces at all levels and heights. The polish work shall be carried

out as follows:

1) Surface Preparation: Sandpapering with various grades, up to 220 macro grit, to the satisfaction

of the Engineer-in-Charge.

2) Sealer Application: Applying two coats of sealer using a spray gun or other suitable means,

allowing sufficient drying time as per the manufacturer’s specifications.

3) Wet Rubbing: Once the sealer coat has dried, wet rubbing with fine emery cloth using ample

water to remove the excess sealer layer and smooth the surface. After wet rubbing, apply special

grade PU fillers to fill any small or large holes/grooves. Allow the filler coat to dry as per the

manufacturer’s specifications.

4) First Coat of PU Polish: Apply the first coat of PU polish with a spray gun or suitable means.

Once dry, sandpaper the surface using fine sandpaper up to 400 micro-grit. This process shall be

repeated three times, ensuring a smooth finish.

5) Stainer Coat Application: Apply a stainer coat of the approved shade, if required. Sandpaper the

wood surface using fine sandpaper up to 600 micro-grit as per step wise requirement for polishing,

to achieve a smooth finish, to the satisfaction of the Engineer-in-Charge.

The polish application shall be conducted according to the manufacturer’s specifications and as

directed by the Engineer-in-Charge. A sample must be approved by the Architect before the full

execution of the work. The single time applied area of polish shall be measured for payment

without considering any wastage.

Total Carried Over to Summary

Iteam No. Item Description Quantity Unit Amount (in Rs.)

1. All adhesives, sealants & paint shall be with low VOC with acceptable VOC content as per

GRIHA requirements and lead free.

2. The Contractor shall prepare shop drawings based on the concept design/ drawings for any

type of fabrication work and get them approved. The Contractor shall prepare mock-

ups/prototypes (as suggested) as per the approved shop drawings for approval. Work shall be

carried out as per the approved shop drawings, approved mock-ups/prototypes and as suggested

by the Engineer-in-Charge.

3. The rate shall be for all floors, all levels and for all heights.

4. The rate shall include the cost of all types of fasteners (ETA approved) to be used for fixing.

5. Structural stability shall be responsibility of the Contractor for all kinds of metal work.

6. All elements shall be factory fabricated and finished, only final finishing to be carried out on site

with all precautions.

7. The Contractor shall coordinate all services related work (cut-outs and provisions) in the metal

work. All cut-out and services provisions shall be finished at the factory/work shop.

8. The Contractor shall provide PVC/nylon seprators, where two different metals connect, to avoid

galvanic reactions.

Structural steel work - Fabrication works - with PU paint:

Providing, fabricating, assembling, hoisting, erecting and fixing in position, structural steel work, at

all heights, all levels, all shapes & sizes with all leads & lifts, using any type of MS sections like

rolled steel sections, hollow sections, plates, chequered plates, bars, sheets, rods, threaded bolts

etc. all conforming to the latest relevant IS codes for the metal elements, i.e. railings, signage

poles, gates, bus shelters, screen walls, commercial poles, gantry structure, grills, bracings,

foundation plates & bolts, platforms, brackets, fencing poles, framing for advertisement boxes on

lighting poles, electrical elements etc. including straightening, cutting, bending, bolting and welding

the members, all as per the structural drawings and as per detailed specifications (for materials &

58 workmanship) including profile cutting, smooth grinding, machining of edges/faces, all necessary 100.00 Kg 111.20

welding (electric arc welding) for the required weld lengths and sizes, machine drilling of holes for

joining/anchoring, all necessary arrangements for templates to keep the foundation bolts in

position, dry sanding, degreasing (wet cleaning) & preparation of rust-free surfaces manually or

mechanically, metal putty to make the surfaces even and smooth, necessary scaffolding/staging,

anchor fasteners for fixing, etc., complete, for all floors, all heights and all level as directed by the

Engineer-in-Charge.

Additionally, the fabricated steel work will be finished with PU paint to ensure durability and

aesthetic quality.

The Contractor shall prepare coordinated fabrication/shop drawings and obtain approval before

commencing any fabrication work along with design calculations to ensure the stability of the

elements. All fabrication work must be executed with precise architectural workmanship and in

accordance with Sections V and VI of IS 800 and IS

The rate shall include the application of two or more coats of PU paint (DFT min 40 micron per

coat) on all surfaces of MS members of approved make and shade. This shall be applied over two

coats of anti-corrosive epoxy base primer (DFT minimum 50 microns per coat), as per the

manufacturer’s specifications, anchor fasteners, etc., all complete. The weight (by theoretical

means) of MS members/structure/element shall be measured for payment without considering

wastage, fixing accessories such as nuts, bolts, fasteners etc.

Total Carried Over to Summary

WATER SUPPLY, PLUMBING & SANITARY FITTINGS

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor etc. complete.[B] 20 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube

fittings and clamps including making good the wall, ceiling and floor etc. complete.[C] 25 mm.

62 Providing and fixing brass screw down stop tap. [C] 25 mm. 2.00 Each 220.82

63 Providing and fixing Gun metal check or non-return full way wheel valve. [C] 25 mm. 2.00 Each 420.63

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the

64 following nominal diameter of self cleansing design with C.I scread down or hinged grating 2.00 Each 599.64

including the cost of cutting and making good the floor.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for waste

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the

65 help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings 2.00 RMT 148.12

etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm

66 diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be 4.00 RMT 876.90

concealed in floors as directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.

Providing and fixing of 110mm Diameter SWR quality (type B) UPVC fitting of Swept Tee with

door, confirming to IS 14735 laid in proper line and level complete as per drawing and direction

67 and satisfaction of Engineer in Charge. 1.00 Each 372.03

Make: Astral / Ashirvad / Prince

Supplying, fixing, testing and commissioning of white Vitreous China Wall Mounted water closet

(European type EWC-P) as per IS: 2556 (Part 2) , with soft close seat and lid as per IS: 2548, of

size and shape as approved by engineer in charge, including rag bolts, fixing in position, grouting

68 and finishing, making good the walls and floors wherever required. The work to be completed in all 1.00 Set 24,060.62

respect to the satisfaction of Engineer-In-Charge.

a) EWC-P:- Make: Kohler / Toto / American Standard

Providing and fixing UPVC SWR WC Connector 130 x 110 mm dia. Socket type of approved

make, fixed to outlet gaskets with UPVC Lubricant or Solvent Cement, all complete as per

69 directions of the Engineer-in-charge. 1.00 Each 215.99

Make: Astral / Ashirvad / Prince

Supplying, fixing, testing & commissioning of Single Piece Concealed Cistern Body with installation

kit & 'P type' drain pipe connection & Full Frame set for wall hung WC, with dual flush 3/6 ltr with

wall flush plate of approved make including concealed valve and push fit flexible hose complete

including cutting and making good the walls where required complete as directed by Engineer-in-

The scope includes the following:

a) Flush Tank with Full Frame; & Dual Flush Plate:- Make: Kohler / Toto / American Standard

Supplying, Fixing & Installing of white vitreous China Over Counter Wash Basin as per IS:

(Part 4) of size and shape as approved by engineer in charge,, including drilling hole for the faucet

& waste coupling, filling the gaps with appropriate silicon cement, complete as per the direction,

approval and complete satisfaction of the Engineer-in-charge.

Over counter Basin - Make: Kohler / Toto / American Standard

Providing, fixing, testing and commissioning of chrome plated Brass Angle valve / Angular Stop

Cock with wall flange, including connection with the water supply pipeline, complete as approved

72 and directed by the Engineer-in-charge. 3.00 Each 1,259.07

Angle Stop Cock - Make: Kohler / Toto / American Standard

Providing and fixing 32mm Grid Drain (with Full thread) (Waste Coupling) without overflow, in

Polished Chrome of approved make and conforming to Manufacturers Standards. Work to be

73 completed to the satisfaction of the Engineer-In-Charge. 2.00 Each 1,364.96

Make: Kohler / Toto / American Standard

Providing and fixing 32mm CP 300mm bottle trap with wall flange, of approved make and as

74 directed by Engineer-in-charge. (For Wash Basins). 1.00 Each 956.47

- Make - Kohler / Toto / American Standard

Providing and fixing Chrome plated ABS Hand Shower (Health Faucet), having a discharge of

LPM, including 8 mm dia, 1 Meter long Flexible tube & wall hook including connection with the

75 angular stop cock, complete of approved make and quality and as approved by Engineer - In - 1.00 Each 1,971.57

Make: Kohler / Toto / American Standard

Supplying and fixing of single toilet paper roll holder with flap made of stainless steel material, at

76 levels as directed by the Engineer in charge. 1.00 Each 1,821.43

Make: Kohler / Toto / American Standard

Supplying, fixing, testing and commissioning of S.S. single robe hook of approved make, fixed to

PVC cleats with C.P. brass screws, etc. all necessary accessories complete as per direction of

77 Engineer-in-charge. 2.00 Each 1,582.82

Make: Kohler / Toto / American Standard

Providing and fixing of 610mm long SS Towel bar in polished chrome with wall flange of approved

78 make as per drawing and direction and satisfaction of Engineer in Charge. 1.00 Each 1,821.43

Make: Kohler / Toto / American Standard

Providing & fixing heavy quality SS 316 grade polished chrome body touchless soap dispenser of

size 180 x 320 x 150mm battery operated having 2 sets of AA or AAA batteries as required, driling

holes in walls / tiles, attaching the mounting brackets with appropriate fasteners, filling the

79 dispenser with 0.5 litres of liquid / gel soap as per manufacturers' standards, testing and 1.00 Each 20,496.84

commissioning as approved and directed by the Engineer-in-charge.

Make - Kohler / Toto / American Standard

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Providing & fixing heavy quality hidden square floor drain cover in polished chrome of size 100 x

100 x 82mm, connected to Nahni trap including setting in floor with white cement sand mortar 1 :

80 to match with floor finish with proper care for preventing side leakages, as approved and directed 2.00 Each 3,275.63

by the Engineer-in-charge.

Make: Kohler / Toto / American Standard

Total Carried Over to Summary

FURNITURE WORKS

1) All wooden furniture shall be manufactured from Superior class teak wood, BWP IS-710 ply,

veneer, laminate, customized/ readymade fabric as per selection, exterior grade PU polish as per

specifications and approved by the & Architect.

2) "Furniture Intent Document" to be referred for furniture reference image, furniture code and

sizes for all the furniture items as given in the schedule. The contractor shall prepare and submit

shop drawings and prototypes of various furniture items as required by Engineer-in-charge for his

approval. Shop drawings should be submitted before preparing prototypes. Mass production shall

be carried out only as per approved samples/prototypes. The contractor has to submit the “As

Built” shop drawing for completed furniture items.

3) Contractor shall be responsible for stability of all furniture items.

4) Provision for connectivity of Power outlets, Multimedia, AV, internet, laptop power, extra power,

microphone, etc. or similar to be given in the furniture with cable organizer, grommet, vertebrae

vertical cable, cable tray etc. (whatever required) or similar to be coordinated with electrical

drawings, which shall be included in the quoted rate of furniture item. However, items like

multimedia, AV, internet, laptop power, extra power, microphones etc., shall be payable under

relevant tender items.

5) "Procurement of items with aesthetic value and visibility shall be on prior approval of Engineer

in charge for specific area of application.

6) Front elevation area of storage unit/ mechanically driven compactor system/ mobile storage

shall be measured for payment in Sqm unless otherwise specified. (Front elevation facing the

storage shelves of compactors/ storages unit shall be considered for measurement.)

7) Cost of each desk shall be inclusive of fliptop panel, grommet wherever specified in particular

item description/ Data sheet. Accessories like desk organiser, monitor arm, bag hook, etc.are

8) Fabric and stone shall be selected and approved by Architect & Engineer-in-charge.

9) Lipping shall be of minimum 2mm thick solid teak wood unless otherwise specified.

10) Only First class teak wood shall be used for any kind of woodwork. All wood (best quality, kiln

seasoned, termite treated and sorted for uniform veins wood) and wood base material shall be

treated with anti-termite treatment as per relevant IS before use and after installation. The

guarantee shall be furnished for 10 years in the prescribed format as directed by EIC.

11) Veneer shall be 4mm thick of natural teak wood selected and sorted for uniform veins, as

approved by engineer-in-charge. The natural veneers slice shall be minimum of 0.5mm thick and

backed ply shall be of BWP grade and density shall be minimum 650 kg/ m3.

12) Laminates shall be 1mm thickness of any colour, finish, texture as approved by engineer-in-

13) All the faces of ply are to be finished with either laminate or veneer, if not specified in the ref.

14) The dimensions of furniture unit and its members mentioned in BOQ item & furniture intent

document are indicative and nothing extra shall be paid or recovered for variation in actual

dimension up to +/- 10%

15) The reference image given are indicative. In case of any discrepancy between BOQ item and

furniture intent document, the BOQ item shall prevail. Incase of any discrepancy within furniture

intent document, decision of engineer-in-charge shall be final and binding.

16) Incase of any discrepancy in specifications between furniture intent document and specified

model of item, the furniture intent document shall prevail.

17) In case, model specified in BOQ item/ furniture intent document of any furniture item is

changed/not available with the manufacturer, the alternate equivalent or superior model of same

company can be considered with the prior approval of Engineer-in-charge and nothing extra shall

be payable for the same.

18) If item/reference image has brass letters/emblem then such brass item shall be paid for in

relevant tender item.

19) Shutter stiffeners to be provided in full height (3300 mm) storages to maintain the strength of

the shutters and to avoid bending of shutters as per requirement and in consultation with the

engineer-in-charge.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

20) The aluminium and MS tube/pipe shall be of minimum 2mm wall thickness unless otherwise

21) The Desk & Workstation tables top thicknesses may be varied as per functional comfort and

as directed by engineer-in-charge.

22) For storages the carcass & internal support shall be made of minimum 19mm thick IS

Grade ply and shelves and backing of carcass shall be minimum 12 mm thick IS 710 Grade ply.

However, for members of large span/height, higher thickness of ply shall be provided for structural

stability & functional comfort for which nothing extra shall be payable over the quoted price.

23) For veneer finish wall panelling, veneer sheet shall be of approximate size 3048 x 1220mm

24) Exterior Grade water based open grains PU polish to be provided on all wooden and veneer

CUSTOM-MADE CATEGORY:

Executive Desk with two (2) return units - C-DK-02

Approximate Dimension (L x W x H) - 3000 X 1050 X 750, two (2) Return unit - 1625 X 600 X

Supply and Installation of the Executive Desk with two (2) return units having a main table as per

81 the reference image. The Executive Desk with two (2) return unit items shall be as per the furniture 1.00 No 2,40,998.63

Low height Storage Unit - C-SU-03 (Main Office)

Approximate Dimension (L x W x H) - As per Furniture intent document x 450 x As per Furniture

intent document

82 Supply and installation of the low-height storage unit as per the reference image. The low-height 7.00 Sqm 54,222.30

storage unit item shall be as per the furniture datasheet. The front elevation area of the storage

unit shall be measured for payment.

Low height Storage Unit - C-SU-08 (PA office)

Approximate Dimension (L x W x H) - As per Furniture intent document x 450 x As per Furniture

intent document

83 Supply and installation of the low-height storage unit as per the reference image. The low-height 3.00 Sqm 35,957.31

storage unit item shall be as per the furniture datasheet. The front elevation area of the storage

unit shall be measured for payment.

Full Height Storage Unit - C-SU-09 (PA office)

Approximate Dimension (L x W x H) - As per Furniture intent document x 450 x As per Furniture

intent document

84 Supply and installation of the full height storage unit as per the reference image. The full height 6.00 Sqm 31,963.47

storage unit item shall be as per the furniture datasheet. The front elevation area of the storage

unit shall be measured for payment.

Storage Unit - C-SU-10 (Ante room)

Approximate Dimension (L x W x H) - As per Furniture intent document x 700 x As per Furniture

intent document

85 Supply and installation of the storage unit as per the reference image. The storage unit item shall 2.00 Sqm 55,363.40

be as per the furniture datasheet. The front elevation area of the storage unit shall be measured

C-TB-14 (Near Conference table)

Approximate Dimension (L x W x H) - As per Furniture intent document x 450 x As per Furniture

intent document

86 Supply and installation of the storage unit as per the reference image. The storage unit item shall 1.00 No 41,359.50

be as per the furniture datasheet. The front elevation area of the storage unit shall be measured

C-SU-58-LI (Main cabin near seating)

Approximate Dimension (L x W x H) - As per Furniture intent document x 450 x As per Furniture

intent document

87 Supply and installation of the storage unit as per the reference image. The storage unit item shall 5.00 Sqm 1,12,817.45

be as per the furniture datasheet. The front elevation area of the storage unit shall be measured

Side Table - C-TB-07 (Main cabin, Ante Room)

Approximate Dimensions (LX W X H ): 550 x 400 x

88 Supply and Installation of side table as per the reference image. The item shall be as per the 4.00 No 24,258.94

furniture data sheet.

Side Table - C-TB-11 (Ante room)

Approximate Dimensions (LX W X H ): 900 x 550 x

89 Supply and Installation of side table as per the reference image. The item shall be as per the 1.00 No 54,085.50

furniture data sheet.

Side Table - C-TB-11A (Main Office)

Approximate Dimensions (LX W X H ): 900 Dia x 385 H

90 Supply and Installation of side table as per the reference image. The item shall be as per the 1.00 No 60,846.19

furniture data sheet.

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Conference Table - C-TB-12

Approximate Dimension (L x W x H) - 4200 X 1500 X

91 Supply and Installation of the conference table as per the reference image. The item shall be as 1.00 No 3,15,763.88

per the furniture data sheet.

Work station - C-WS-01

Approximate Dimension (L X W X H): 1200 X 700 X

92 Supply and installation of the workstation desk table as per the reference image. The item shall be 3.00 No 29,694.00

as per the furniture data sheet.

Two seater sofa with solid wooden frame and legs - S-SF-02 (main cabin)

Approximate Dimensions (L X W X H): 1800 X 725 X

93 Supply and installation of a two seater sofa as per the reference image. The item shall be as per 1.00 No 99,819.56

the furniture data sheet and fabric as per fabric selection package.

Single Seater Sofa - S-SF-03 (Main cabin)

Approximate Dimensions (LX W X H ): 750 x 725 X

94 Supply and installation of Single Seater Sofa made as per the reference image. The item shall be 2.00 No 74,367.56

as per the furniture data sheet and fabric as per fabric selection package.

Single seater sofa - S-SF-04 (Ante room)

Approximate Dimension (L X W X H): 790 x 780 x

95 Supply and installation of single seater sofa as per the reference image. The item shall be as per 1.00 No 36,928.73

the furniture data sheet and fabric as per fabric selection package.

Two seater sofa with solid wooden frame and legs - S-SF-06 (Waiting Room)

Approximate Dimensions (L X W X H): 1800 X 780 X

96 Supply and installation of a two seater sofa as per the reference image. The item shall be as per 1.00 No 99,819.56

the furniture data sheet and fabric as per fabric selection package.

Diwan sofa - S-DI-01 (Ante room)

Approximate Dimension (L X W X H): 2010 x 850 x

97 Supply and installation of diwan with bolster pillow as per reference image. The item shall be as 1.00 No 50,904.00

per the furniture data sheet and fabric as per fabric selection package.

Partition Screen - E-SI-02 (Main cabin)

Approximate Dimension (L x W x H) - As per Furniture intent document x 50 x As per Furniture

intent document

98 Supply and installation of partition screen as per reference image. The item shall be as per the 4.00 Sqm 20,547.19

furniture data sheet. The front/ single side only elevation area of the Partition Screen shall be

measured for payment.

Coat Hanger - E-SI-04 (main cabin)

Approximate Dimension (D1 X D2 X H): 480 x 450 x

99 Supply and Installation of a free standing coat hanger as per reference image. The item shall be 1.00 No 17,498.25

as per the furniture data sheet.

Chair - S-CH-04 (Main cabin)

Approximate Dimension (L X W X H): 560 x 650 x

100 Supply and installation of a chair made as per reference image. The item shall be as per the 8.00 No 20,679.75

furniture data sheet and fabric as per fabric selection package.

C-TB-10 (Waiting Room-Corner Table)

Approximate Dimension (L x W x H) - As per Furniture intent document x 400 x As per Furniture

intent document

101 Supply and installation of the storage unit as per the reference image. The storage unit item shall 2.00 No 30,621.94

be as per the furniture datasheet. The front elevation area of the storage unit shall be measured

C-TB-13 (Waiting Room-Corner Table)

Approximate Dimension (D x H) - As per Furniture intent document x 450 Dia x As per Furniture

intent document

102 Supply and installation of the storage unit as per the reference image. The storage unit item shall 1.00 No 31,417.31

be as per the furniture datasheet. The front elevation area of the storage unit shall be measured

Chair - S-SF-07 (Waiting)

Approximate Dimension (L X W X H): 600 x 580 x

103 Supply and installation of a chair made as per reference image. The item shall be as per the 3.00 No 38,575.69

furniture data sheet and fabric as per fabric selection package.

TOTAL FOR CUSTOM-MADE CATEGORY:

BOUGHT OUT CATEGORY

Task chair - S-CH-01

Supply and Installation of chair as per reference image, furniture intent document, approved make

104 and model as under. 1.00 No 13,459.87

Godrej : Cross Full Back Knitted Fabric Ergonomic Office Chair (Black Ink)

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Main Chair - S-CH-02

Supply and Installation of high back chair as per reference image, furniture intent document,

105 approved make and model as under. 1.00 No 16,543.80

Featherlite: Liberate high back leatherette chair.

Mid Back chair - S-CH-03

Supply and Installation of chair as per reference image, furniture intent document, approved make

106 and model as under. 13.00 No 13,122.63

Godrej: Motion High Back Knitted Fabric Ergonomic Office Chair.

TOTAL FOR BOUGHT OUT CATEGORY:

TOTAL FOR FURNITURE WORKS:

1. "Procurement of items with aesthetic value and visibility shall be on prior approval of Engineer in

charge for specific area of application."

2. Item shall be executed for all spaces / areas / rooms / buildings etc. with different types of

fabrics / materials as per selection (provided in soft furnishing package document) and as

suggested by engineer in charge.

3. The contractor shall get the approval of each sample of material for curtain / blinds (fabric, PVC,

UPVC slats, etc.), fixing accessories, carpet etc. from the engineer-in-charge before execution for

respective areas.

4. Contractor shall co-ordinate and execute any type of services required in soft furnishing work.

Hand Tufted 100 % wool as per required Tufts per square inch

Supply and stacking of area rug/carpet as per the approved design and colour made out pure wool

of approved quality and specification. There shall be hand tufted construction technique, as per

the specified shape and size, installation, transportation and carriage all complete as per direction

of the engineer-in-charge.

The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools &

107 tackles of approved make for all floors, all heights, all levels and all places. The contractor shall 8.00 Sqm 9,234.43

get the sample approved by the engineer-in-charge before execution. Design shall be finalized as

per design samples submitted by agency and approved by engineer in charge. The actual laid

area shall be measured for payment without considering any wastage.

Design: Malak Hand Tufted Woolen And Viscose Rug

Make - Obeetee Carpets

Hand Woolen Carpet

Supply and stacking of area rug/carpet as per the approved design and colour made out pure wool

of approved quality and specification.

The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools &

tackles of approved make for all floors, all heights, all levels and all places. The contractor shall

get the sample approved by the engineer-in-charge before execution. Design shall be finalized as

per design samples submitted by agency and approved by engineer in charge. The actual laid

area shall be measured for payment without considering any wastage.

These carpets are washable.

Design: Victoria Hand Tufted Woolen Rug

Make - Obeetee Carpets

TOTAL FOR CARPET WORKS:

Cellular shades - Motorized

Providing and fixing of Cellular shades with motorized operating as per the curtain the reference

109 image. Cellular shades selection as per the reference image/ intent. The actual elevation area of 31.00 Sqm 7,650.45

curtains in a closed condition shall be measured and paid. The rate shall be applicable for all

heights and all floors.

Cellular shades - Manual

Providing and fixing of Cellular shades with Manual (chain) operating as per the curtain the

110 reference image. Cellular shades selection as per the reference image/ intent. The actual 15.00 Sqm 2,959.86

elevation area of curtains in a closed condition shall be measured and paid. The rate shall be

applicable for all heights and all floors.

TOTAL FOR CURTAIN WORKS:

Iteam No. Item Description Quantity Unit Amount (in Rs.)

Providing, transporting and arranging / fixing in position various Wooden Frame section of any

size made of approved teakwood / hardwood and polish of approved shade and finish including

approved carving, inlay, hand painting, engraving, decorative metal works or any other type of

111 decorative works of any material and any finish. Including fixing clamps, mounting material, 5.00 Sqm 11,783.32

backing material, glass, any other hardware, as per approved material / finish, to the various areas

as per direction of Architect and Engineer Incharge of having different basic rates as following -

TOTAL FOR FRAMED ART WORKS:

ACCESSORIES WORKS

The contractor shall have to co-ordinate for the below mentioned loose accessories and make

arrangements as per drawing and as suggested by Engineer in charge.

The contractor shall arrange samples of all type of accessories (with different material and design)

for review and approval. Contractor shall arrange mock-up for specific area with collected samples

as suggested by Engineer in charge.

After reviewing the mock-up, any modifications/ alterations suggested by the Engineer in charge

shall be incorporated. This process shall continue until final approval of the mock-up is received

from the the Engineer in charge.

The contractor shall have to shift or re-arrange the loose accessories as per the requirement of

the Engineer in charge.

The rate shall be inclusive of charges for necessary equipments (tools and tackles) needed for

shifting the accessories anywhere within the entire site, packing, un-packing, re-packing,

protecting, cleaning, maintaining, storing, etc complete as suggested by Engineer in charge. The

rate shall be applicable for all height, all floors.

The contractor will have to co-ordinate for the loose accessories and make arrangements to shift

the loose accessories as per the requirement of the Engineer in charge.

Providing, transporting and arranging / fixing in position various Dispenser to the various areas as

per direction of Engineer Incharge-

Aroma dispensers (Automatic) - AD1

Providing, transporting and arranging / fixing in position dust Bin to the various areas as per

113 direction of Engineer Incharge - 3.00 No 1,627.87

Providing, transporting and arranging / fixing in position Tea coasters / Tea Set to the various

areas as per direction of Engineer Incharge -(including stand of the coaster as per selection)

Tea coasters - TC4

Providing, transporting and arranging / fixing in position Tissue box and Tissue Box Covers to the

115 various areas as per direction of Architect and Engineer Incharge - 2.00 No 4,028.84

Tissue Box - TI1

Providing, transporting and arranging / fixing in position Pen Pencil Holder to the various areas as

per direction of Engineer Incharge -

Pen / Pencil holders - TS2

Providing, transporting and arranging / fixing in position Desk Organizer to the various areas as

117 per direction of Engineer Incharge - 1.00 No 1,887.69

Desk organizer - TS3

Providing, transporting and arranging / fixing in position tray to the various areas as per direction

118 of Engineer Incharge - 1.00 No 2,119.94

Providing, transporting and arranging / fixing in position Table Vases with flowers to the various

119 areas as per direction of Architect and Engineer Incharge - 1.00 No 3,604.64

Table Vase - VA6

Providing, transporting and arranging / fixing in position Wall Clocks to the various areas as per

120 direction of Architect and Engineer Incharge - 2.00 No 2,911.07

Wall Clock - WC2

TOTAL FOR ACCESSORIES WORKS:

Item no Item Description Unit Qty. Rate

Electrical Works

Distribution BoardMCB 's and its Accessories

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following

(A) 6 to 32 Amp. Cat.III

Providing & erecting 415V MCB Four Pole for Motor & Inductive Load (CCurve) having

KA breaking capacity & confirms to IS:8828 in existing box having following capacity (b)

123 PlasticenclosurefittedwithDINrailsuitableforincorporating Three /Four nos. MCB No. 2 107.13

Total Carried Over to Summary

Cable Tray & Racway

Supplying under floor pregalvanised corrosion proof rectangular sheet steel cable trunking

of 1.6 mm thick having with stand point load up to 1.33 Ton & free from seepage of

concrete of screed water with all accessories,Junction Box,Joints as required and

124 demanded by engineer-incharge and laying/erecting as per OEM guidelines and as per Mtr 30 1,034.36

instruction of engineer incharge having following size of dimensions and No of

compartments (W x D x T) Cat-III

[11] 225mm x 38mm x 1.6mm with Three Compartments

125 [10] 150mm x 38mm x 1.6mm with Three Compartments Mtr 25 724.36

126 [7] 50mm x 38mm x 1.6 mm with One Compartments Mtr 15 282.18

Supplying & Fixing of 250mm (L) x 250mm (W) x 50 – 80 (H) / 60- 75 (H) / 65 - 90(H)

adjustable height floor Cross Over Type junction box made out of pre galvanized sheet

min. 1.6mm thick base, cover & min. 2.0 mm thick for Lid with Electrostatic polyster epoxy

coating or 275 GSM coating mass. minimum 8mm Trap lid to be provide to acodomate the

specified flooring. The base of junction box should have pre punched / champhered

knockouts on all four sides to accomodate trunking from a minimum 50mm to maximum

225mm width & 38mm height. The system must have smooth curved die cast pillars for

ease of pulling cables. The cross over boxes should have flyover units made of abs plastic

or metal to route and distribute power, data & other cables. Cover of junction box should be

complete as required as per detail specificaton.

Supplying & Fixing of 150mm (L) x 150mm (W) x 50 – 80 (H) / 60- 75 (H) / 65 - 90(H)

adjustable height floor junction box made out of pre galvanized sheet min. 1.6mm thick

base, cover & min. 2.0 mm thick for Lid with Electrostatic polyster epoxy coating or

GSM coating mass. minimum 8mm Trap lid to be provide to acodomate the specified

flooring. The base of junction box should have pre punched / champhered knockouts on all

four sides to accomodate trunking from a minimum 50mm to maximum 225mm width &

38mm height. The system must have smooth curved die cast pillars for ease of pulling

cables. The cross over boxes should have flyover units made of abs plastic or metal to

route and distribute power, data & other cables. Cover of junction box should be complete

as required as per detail specificaton.

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and flame proof confirming BS with necessary end

129 caps Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and Mtr 20 405.28

measuring of following sizes

(2) 100 mm x 50 mm trunking

Total Carried Over to Summary

Internal Wiring

Item no Item Description Unit Qty. Rate

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade HFFR insulated multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

(b) with 16 swg HGS metal conduit pipe and accessories painted black erected flushed on

wall/ceiling complete. Cat-III

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade HFFR insulated multi strand

copper wires, in below type of pipe to be erected complete with earth continuity and

necessary connection with primary light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

(b) with 16 swg(1.6 mm thick) HGS metal conduit pipe and accessories painted black

erected flushed on wall/ceiling complete. Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV grade HFFR insulated multi strand copper

wires erected in below type of pipe with 6A Modular type switches and following type of

accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(b) with 16 swg HGS metal conduit pipe and accessories painted black erected flushed on

wall/ceiling complete. Cat-III

One 6 A x 5 pin 250 Volt socket outlet point controlled by one 6 A switch located on switch

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade HFFR insulated multistrand copper wires, in following type of to be

erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin

Plug/Socket erected on PVC / Metallic box covered with appropriate front plate modules

134 erected on / in wall / ceiling as per pipe erected with following type of accessories. No. 35 549.59

[I] For 6A Plug/Socket and 6 A switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board.

(b) with 16 swg HGS metal conduit pipe and accessories painted black erected flushed on

wall/ceiling complete. Cat-III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

135 Metallic box, single mounting base frame covered with textured / metallic front plate No. 7 239.30

modules erected on / in wall / ceiling with following type accessories. Cat.iii

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade HFFR insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug /Socket erected

on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of accessories.

[II] For 16A Plug/socket and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(b) with 16 swg HGS metal conduit pipe and accessories painted black erected flushed on

wall/ceiling complete. Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade HFFR insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected complete with Modular type switch & 5 pin Plug/Socket erected

on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in

137 wall / ceiling as per pipe erected with following type of accessories. No. 5 880.59

[III] For 16A Plug/Socket and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm (

green) earthing wire from mcb d b board.

(b) with 16 swg HGS metal conduit pipe and accessories painted black erected flushed on

wall/ceiling complete. Cat-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation directed by Engineer In charge.

(20) Modular Buzzer-Cat.III

Supplying and fixing of following sizes of steel conduit along with accessories in

surface/recess including painting in case of surface conduit, or cutting the wall and making

good the same in case of recessed conduit as required.

Item no Item Description Unit Qty. Rate

Total Carried Over to Summary

Light Fixtures & Fans

Supplying installation testing & commissioning of approx 28W suspended/surface mounting

type LED 4 feet Luminaire, IP 20 ,colour temperature 4000 to 6500 K having efficiency not

less than 80 lm/W, CRI ≥ 80, THD ≤ 10%, extruded aluminum housing, inbuilt electronic

143 driver, suspension arrangement for pendent mounting through suspension bracket No. 6 4,336.56

including 3 core 1.5 sq.mm FR PVC insulated and PVC sheathed copper conductor cable

and earthing etc. as required. (Any one make of REGENT(slash s) - LED 0561-28W, Light

Forms-Five bow h -28w / or approved equivalent)

Supplying installation testing & commissioning of approx 20Watt Light Wide 55° Beam

Angle recessed mounting type LED Luminaire, IP 20 ,colour temperature 4000 to 6500 K

having efficiency not less than 80 lm/W, CRI ≥ 80, THD ≤ 10%, extruded aluminum

housing, inbuilt electronic driver, suspension arrangement for pendent mounting through

suspension bracket including 3 core 1.5 sq.mm FR PVC insulated and PVC sheathed

copper conductor cable and earthing etc. as required.(Any one make of REGENT(aston) -

LED 3138-20W, Endo Ledz -Glare less-19.8W, Light forms indus155-20W/ or approved

Supplying installation testing & commissioning of approx 10Watt Light Wide 38° Beam

Angle recessed mounting type LED Luminaire, IP 20 ,colour temperature 4000 to 6500 K

having efficiency not less than 80 lm/W, CRI ≥ 80, THD ≤ 10%, extruded aluminum

housing, inbuilt electronic driver, suspension arrangement for pendent mounting through

suspension bracket including 3 core 1.5 sq.mm FR PVC insulated and PVC sheathed

copper conductor cable and earthing etc. as required. (Any one make of REGENT(aston) -

LED 3138-10W, Endo Ledz -Glare less-8W, Light forms Leo99-10.2W/ or approved

Supplying installation testing & commissioning of approx 24Watt/mt (900∅) pendant LED

Down lighter Luminaire, IP 20 ,colour temperature 4000 to 6500 K having efficiency not

less than 100 lm/W, CRI ≥ 80 ,THD less than 20%, Extruded Aluminum / CRCA / Metal

146 housing / Thermoconductive plastic housing, inbuilt electronic driver, including 3 core 1.5 No. 3 39,014.91

sq.mm FR PVC insulated and PVC sheathed copper conductor cable and earthing etc. as

required.(Any one make of REGENT(volt) - 24W/m, Light forms- Moon band 40-25W/m/ or

approved equivalent)

Supplying installation testing & commissioning of approx 8Watt Light Wide 24° Beam Angle

recessed mounting type LED Luminaire, IP 20 ,colour temperature 4000 to 6500 K having

efficiency not less than 80 lm/W, CRI ≥ 80, THD ≤ 10%, extruded aluminum housing, inbuilt

147 electronic driver, suspension arrangement for pendent mounting through suspension No. 6 6,303.79

bracket including 3 core 1.5 sq.mm FR PVC insulated and PVC sheathed copper conductor

cable and earthing etc. as required. (Any one make of REGENT(aston) - LED 3138-8W,

Endo Ledz -Glare less-8W, Light forms Leo99-7.3W/ or approved equivalent)

Supplying installation testing & commissioning of approx 15Watt Light Wide 38° Beam

Angle recessed mounting type LED Luminaire, IP 20 ,colour temperature 4000 to 6500 K

having efficiency not less than 80 lm/W, CRI ≥ 80, THD ≤ 10%, extruded aluminum

housing, inbuilt electronic driver, suspension arrangement for pendent mounting through

suspension bracket including 3 core 1.5 sq.mm FR PVC insulated and PVC sheathed

copper conductor cable and earthing etc. as required. (Any one make of REGENT(aston) -

LED 3138-15W, Endo Ledz -Glare less-15W, Light forms Leo99-14.2W/ or approved

Supplying & erecting single phase approved make industrial exhaust fan suitable for

medium duty ring mounted low noise operation suitable for medium duty having following

149 dia size and maximum speed in RPM No. 1 3,937.99

[E] 450 mm dia 1400 RPM

Supplying & erecting electro galvanised G.I. wire micro mesh jali cover of grade

150 required size with suitable wooden frame duly fitted in wall outside of exhaust fan for insect Sq. Mtr 1.5 628.51

Total Carried Over to Summary

151 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. Kg. 5 77.70

Total Carried Over to Summary

Item no Item Description Unit Qty. Rate

Electrical Miscellaneous

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction

152 boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved Mtr. 30 23.06

manner as directed

Total Carried Over to Summary

ICT Distribution System For Data And Voice Infra

PVC Conduits & Accessories

Supplying and fixing of following sizes of medium class PVC conduit along with accessories

156.00 in surface/recess including cutting the wall and making good the same in case of recessed MTRS 33.00 32.06

conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories

in surface/recess including cutting the wall and making good the same in case of recessed

conduit as required.

CAT6A UTP Components for Data/LAN & Wi-Fi

Supply and laying of specified make UTP CAT6A LSZH cable in prelaid PVC conduits /

pipes / raceway, but without the cost of raceway or pipe. (The cable is to be drawn from

158.00 individual workstation/device/desktop area to the central communications/server room. MTRS 638.00 71.05

Terminations to be carried out in any intermediate wiring closets/telecom closets by way of

racks/MDF/IDF)_DATA, VOICE, CCTV Cabling as per technical specification etc. as

Supply, Installation, Testing & Commissioning of Single UTP CAT6A Tool less RJ-45 I/O

and RJ45 Information outlet with insertion cycle (in & out) upto 2500 times (I/O) of specified

make inclusive of termination of CAT6A cable at each IO at Equipment & Rack Side as per

technical specification etc. as required.

Supply, Installation, Testing & Commissioning of CAT6A UTP RJ-45 Patch Cords Solid

160.00 Conductor 1 mtr. for data (Hub Side)-Data, Number of Insertion upto 2500 Duty Cycle as EACH 34.00 318.15

per technical specification etc. as required.

Supply, Installation, Testing & Commissioning of CAT6A UTP RJ-45 Patch Cords Solid

161.00 Conductor 2 mtr. for data (Hub Side)-Data, Number of Insertion upto 2500 Duty Cycle as EACH 34.00 344.66

per technical specification etc. as required.

Supply, Installation, Testing & Commissioning of UTP CAT6 / CAT6A Gigabit Modular

Unloaded Patch Panel for 24 ports in 1U form factor as per the tender specifications, with

162.00 universal A/B labeling and 110 connector terminations on rear of panel allowing for quick EACH 2.00 3,976.88

and easy installation of 22 to 24 AWG cable.-Data includes Computer Point, CCTV, ACS,

CCTV, Wi-Fi as per technical specification etc. as required.

Supply, Installation, Testing & Commissioning of Singlex Face Plate for mounting CAT6A

IO with required back box as per technical specification etc. as required.

Supply, Installation, Testing & Commissioning of Duplex faceplate for mounting CAT6A IO

with required back box as per technical specification etc. as required.

Supply, Installation, Testing & Commissioning of 19-inch 12 Port LIU, rack mounted , Fully

165.00 loaded with 2 X 06 Ports Adaptor Connector Panel & with Splice Tray, inclusive of all EACH 2.00 11,665.50

mechanical accessories with out pigtail, as per technical specification etc. as required.

Supply, Splicing,Testing & Commissioning/ Termination of LC-Style Pigtail, 9/125,

Singlemode, 1.5 meter, as per technical specification etc. as required.

Supply, Installation, Testing & Commissioning of LC-LC single mode duplex fiber optic

patch cord 3mtr, as per technical specification etc. as required.

Supply, Installation, Testing & Commissioning of 15U (600W X 600D)MM Wall mount

closed rack with front glass door, fan tray on top, perforated rear doors, keyboard tray with

shelf. Casters & 2 nos vertical power strip with std, as per technical specification etc. as

Item no Item Description Unit Qty. Rate

Supplying , fabricating and installation of various sizes SS race way / junction

boxes/clamps/ hangers / enclosure for ELV Fixtures/ for cable trays / Base for Display

mounting / Flange for Display etc. made out of 14 gauge sheet/Angle/Flat/rod/ channel/box

section etc with all necessary accessories like bend, junction boxes, coupler, supporting

169.00 clamps, elbows, hardware, anchor fasteners complete with Cutting, welding, grinding, KGs 50.00 477.23

finishing necessory grouting,cementing, plastering etc.. All the necessary fabrication

required will be included in the scope of contractor. Scope also includes two coat of primer

and two coat of paining of each items on all the sides complete in all respect as instructed

by Architect / project in charge.

Total Carried Over to Summary

Cable Television Distribution System

Supplying and Laying of Un-Armoured RG 11 Co-Axial TV cable in prelaid conduit as per

technical specification etc. as required.

Supply, Installation, Testing and Commissioning of one television point to be done with

171.00 television outlet socket and box of the APPROVED make, as per technical specification EACH 3.00 152.10

etc. as required.Cat.|||

Total Carried Over to Summary