REPAIRS/REPLACEMENT OF FLOOR, PLASTER, SUNKEN FLOOR FOR TOILET / BATHROOM, KITCHEN, PLUMBING, SANITARY, REPAIR / REPLACEMENT OF JOINERY, AC SHEET, FALSE CEILING ETC IN ZONE-III, UNDER AGE B/R-II AT GE (WEST) BAREILLY.

Amount

Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc

M&L for Brickwork with fly ash brick in CM 1: 6 straight or curved on plan exc 6 m mean radius .

Demolition of cement concrete (un-reinforced) including terrazzo, tiling etc of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Supply only liquid water proofing compound all as specified and directed( Make : Dr. Fixit of pidilite or equivalent)

M&L for cement concrete type D2,1:4:8 (using 20 mm graded stone aggregate) as in mass concrete complete all as specified and directed

M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed

Dismantling floor, stone, hearth or wall tiling/terrazo including cement mortar bedding complete or in patches and removing rubbish off the premises complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.

M&L for glazed coloured ceramic tiles 450 x 350 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4, complete all as specified and directed.

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular)area of each tiles exceeding 0.11 Sqmbut not exceeding 0.18 Sqm (400 x 400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6, complete all as specified and directed.

All as per Serial item No 08 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4 complete all as specified and directed

M&L for double charged vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm( 600 x 600 ) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, complete all as specified and directed

All as per serial item No 10 but as in vertical surfaces incl plastering 10mm thick in CM 1:4,complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone agg in plinth protection, finished even and smooth w/o using extra cement.

M&L for Machine cut kota stone slab 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete, over and including 20mm thick screed bed or bedding layer in cement mortar 1: 6, for laying floor finishes all as specified

M&L for Machine cut kota stone slab 15 to 18 mm thick in riser of steps, skirting , dado and pillar laid over cement screed and jointed over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) over and including rendering 10 mm thick in cement mortar 1:4, as in backing layer all as specified

M& L for providing precast cement concrete rubber moulded chequered coloured tiles 20 to 25 mm thick even finished on top of approved design and pattern complete all as specified and directed

M& L for providing precast cement concrete rubber moulded coloured interlocking tiles 60 mm thick with grey cement and pigment of approved design and pattern laid over a layer of 25 mm thick sand cushion including filling the joint with sand complete all as specified and directed

M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) finishing sufaces even and smooth without using extra cement complete all as specified and directed

Dismantling of cast iron /PVC/AC/SGSW pipes 100mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F PVC(SWR) 110mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed

S&F PVC (SWR) 110mm dia bends complete all as specified and directed.

S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed Make:- Sintex(Pure), Vectus(Smart/Safe), Supreme(Pure white)

S&F rotational moulded polythene water storage tanks tripple layer white in colour(cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed Make:- Sintex(Pure), Vectus(Smart/Safe), Supreme(Pure white)

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

S&F 16 to 18 mm thick granite stone slabs mirror polished of colour and shade as approved by GE, machine cut bedded & jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone fixed as in steps, jambs, pillars, window cills, cooking platforms & the like over a scree bed of 15mm thick 1:6 c ement mortar etc complete all as specified and directed

Rounding to edges of stone slabs one edge , such as in steps , cooking platform, and other similar situations complete all as specified and directed

M&L Grinding and polishing to old terrazzo flooring/ skirting, complete all as specified and dirested.

S&F in repairs double legged door stopper of aluminium alloy with rubber complete all as specified and directed

S&F in repairs door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm long complete all as specified and directed.

S&F in repairs tubular, towel rail brass chromium plated 20mm dia D type 60 cm long between flanges complete all as specified and directed

S&F in repairs 20 mm dia Mild steel pVC coated fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra. Cement and then applying two coat of oil bound distemper over a coat of primer wash after preperation of newly plastered surface including aking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra cement and then applying Two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces, including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified

M&L 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling using CM 1:4 finished even and smooth without using extra cement and then applying three coat of white wash after preparing the surface including Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation of old distempered surface of walls including plugging nail holes with cement based putty,making good surface to match existing surface and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old distempered surface of walls including plugging nail holes with cement based putty,making good surface to match existing surface and applying two coats of oil bound distemper complete all as specified and directed

M&L for preparing of old distempered surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed

M&L preparation of old plaster surfaces and applying one coat of white wash on walls complete all as specified and directed

M&L preparation of old plaster surfaces and applying one coat of white wash on ceilings surface . complete all as specified and directed

M&L for applying layer of birla wall care putty on wall/ceiling surfaces including rubbing down the surfaces with sand paper after getting dried to obtain a smooth & even surface complete all as specified and directed.

S&F in repairs factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer's specification and drawing.

S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive). complete as per direction of Engr-in-Charge.

S&F PVC boards 19/20 mm thick any colour/ prelaminated as in cabinets incl sshelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) insulation boards / slabs / blankets of any thickness, including cover fillets complete all as specified and directed.

M&L in repairs 4 mm thick E board classic (everest /equivalent) tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanium iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling incl taking down old ceiling with frame and making good disturbed surface complete all as specified and directed .

S & F in repairs Galvanized mild steel wire mesh 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 100mm rat helical door spring complete all as spd and directed

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed

S&F in repairs vitreous china Orissa pattern IWC size 580x440mm white with integral foot rest complete including trap.

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed

S&F in repairs waste fitting 32 mm dia brass chromium plated for glazed ware sinks/basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repairs PVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified & directed

S&F in repairs waste coupling, complete fitting for sinks.

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves/ two way angle valve with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 100 mm dia shower rose of Chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs chromium plated wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repairs water jet for ETWC chromium plated with PVC connection complete all as specified and directed.

S&F CP heavy duty extension pieces 15mm bore and 25 mm long in repairs.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 450mm long with PTMT nuts complete all as specified and directed.

S&F in repairs PVC toilet cabinet with mirror of size 20"X16" of selecred quality complete as specified and directed .

S&F in repairs grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F in repairs 75 mm x 32 mm dia chromium plated waste fitting special size suitable for stainless steel sinks including PVC flexible waste pipe of approved quality complete all as specified and directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1 mm thick with plugs washers and waste pipe and coupling including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe overall size of sink 915 x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repair of PVC corner set of three of size (12'X12" ,9"X9" and 6" X6" ) with railling and complete all as specified and directed.

S&F in repairs plate rack made out of 1 mm thick stainless steel sheet of size 75 cm x 90 cm x 25 cm with all internal fittings (as per sample) complete all as specified and directed

S&F in repairs Chromium plated toilet paper stand as per directed by engg-in-charge

S&F in repairs Chromium plated towel ring as per directed by engg-in-charge

S&F in repairs glass shelf with chromium plated brackets of suitable size as per directed by engg-in-charge

Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as spd and directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as spd and directed

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) one side prelam pvc in place of plain and another side decorative, consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing.

S&F 2nd class hard wood chowkhat or frames, plain solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified & directed by Engr-in-Charge

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .

S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F 2nd class hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats

S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wie gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (II) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill shall be measured and paid seperatly under relevant item of schedule

S&F Butt hinges, medium weight, Stainless steel and fixed of size 100mm.

S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed.

S&F aluminum anosided handle 150mm long of extruded section and fixed.

M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws

S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete .

M& L for Preparation of new iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer

A K builders

multiple alliance enterprises

REHAN CONSTRUCTION

RIYASAT ALI KHAN