Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.2 LAccepted-AOC VILL GACHHARATI P O TAKI P S BASIRHAT NORTH 24 PARGANAS | BASIRHAT | NORTH 24 PARGANAS | WEST BENGAL | ₹5.2 L | L1 | Accepted-AOC LOWEST BIDDER |
| 2 | L2₹6.0 L+₹84,073.15 (16.2%)Rejected-Finance | ₹6.0 L+₹84,073.15 (16.2%) | L2 | Rejected-Finance 2nd Lowest Bidder |
| 3 | L2₹6.0 L+₹84,073.15 (16.2%)Rejected-Finance 38A KALIGHAT ROAD KOLKATA 26 | KOLKATA | KOLKATA | WEST BENGAL | ₹6.0 L+₹84,073.15 (16.2%) | L2 | Rejected-Finance 2nd Lowest Bidder |
| 4 | L3₹6.3 L+₹1.2 L (22.5%)Rejected-Finance RAHIM MOLLA AMDOBE BAGDAH NORTH 24 PARGANAS | 24 PARAGANAS NORTH | WEST BENGAL | 700028 | ₹6.3 L+₹1.2 L (22.5%) | L3 | Rejected-Finance 3rd Lowest Bidder |
| 5 | L4₹6.6 L+₹1.5 L (28.1%)Rejected-Finance | ₹6.6 L+₹1.5 L (28.1%) | L4 | Rejected-Finance 4th Lowest Bidder |
Tender Value
₹6.5 L
EMD Value
₹12,934
Closing Date
23 May 2026, 5:00 pmClosed
EE/MMED
Office of the Executive Engineer, Metropolitan Mechanical and Electrical Division, Jalasampad Bhawan (10th floor), Salt Lake City, Kolkata-91
Premonsoon repairing, maintenance, servicing, overhauling of sluice gates of Panitore, Saratkhali khal, Sonai khal (EMNO), Tetulia , Gacharat, Dist- North 24 PGS. under the Bidyadhari Drainage Division to be executed through Metropolitan Mechanical
2026_IWD_1024031_1
WBIW/EE/MMED/e-NIT-01/2026-27
Open Tender
MECHANICAL
Percentage
45 days
Panitore, Saratkhali khal, N 24 PGS
Please refer Tender documents.
6 documents required · 6 mandatory
₹12,934
Yes
6 Aug 2026
12 May 2026
25 May 2026
15 May 2026
23 May 2026
15 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Servicing of headstock assembly i.e. opening the hand wheel from screw rod, including opening the thrust bearing from top and bottom thrust plate of bearing housing, nut, coller etc and cleaning all the components with the help of Kerosine and emery paper and re-fitting the same including changing necessary nuts & bolt after greasing the thrust bearing if Ok otherwise replaced by new one (excluding the cost of bearing, supplied separately) and fileing work if required for fixing to the pedestal upto the satisfaction of E.I.C. The cost includes cost of materials, man power employed, kerosene, grease, consumables like emery paper, cloths, blots & nuts, hire charges of tools & tackles etc. | 24 | each | 2,076.12 | ₹49,826.88 |
| 2Supply of bearing | |||||
| 2.01 | f) Bearing no.51213 (SKF)(Thrust bearing) each 4570.00 | 7 | each | 5,446.53 | ₹38,125.71 |
| 2.02 | g) Bearing no.51214 (SKF)(Thrust bearing) | 3 | each | 5,908.94 | ₹17,726.82 |
| 3 | Supplying, fitting, fixing bolts with nuts, washer: (b) Length above 75 mm and upto 150 mm. | 10 | kg | 122.76 | ₹1,227.6 |
| 4 | Supplying, fitting & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. | 11.89 | kg | 1,682.82 | ₹20,008.73 |
| 5 | Surface cleaning of metal surfaces by chemical cleaners and then by hand with emary paper, wire brush and power tool cleaners and removing dust and preparation of surface including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. | 926 | per Sq.m. | 76.28 | ₹70,635.28 |
| 6 | Painting of embedded parts, all types of gates, stoplogs and barscreen/gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless s p r a y preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns)including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. | 926 | per Sq.m. | 485.06 | ₹4,49,165.56 |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.91 MB
WB2911.pdf
Tender Documents • 0.97 MB
BOQ_2516734.xls
BOQ • 0.34 MB
OID.pdf
Additional Documents • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .