COMPREHENSIVE B/R MAINTENANCE AND CERTAIN REPAIRS TO BUILDING AND REPAIR TO DRAIN, FOOTPATH, BOUNDARY WALL, SEWAGE SYSTEM AT CGDHQ-15 UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Demolition of PCC (unreinforced) as in ground floors & paving n.exc 15 cm thick (below or above GL) and disposal on debris up a distance n.exc 100m where directed

Demolition of cement concrete in ground floors and pavings exc 15 cm thickness above ground level as in sunken floors etc

Demolition of cement concrete (unreinforced)of any description and in any position.

Demolition of RCC of any description and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M & L cement concrete 75 mm thick type D2 1:4:8(40 mm graded aggregate) as in floor as in sub base for laying floor finishes

M&L for 75mm thick PCC type C-2 1:3:6 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M & L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded aggregate as in leveling course.

M & L PCC 1:5:10 type E2 as in sub base of floor mass filling using 40 mm graded aggregate.

M& L PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate for bedding, coping,haunching etc, and casting of post including necessary form work complete all as specified and directed.

Precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manhole cover slabs, of any thickness, size or shape including necessary form work, set and jointed in cement mortor (1:4) complete all as specified and directed.

Demolition of stone /boulders masonary work built in CM including all quoins, arches, pillars etc & removing from site.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing tiles and rubbish off the premises

S&F Coloured glazed ceramic tiles 300 x200 x7 mm thick on vertical surfaces including 10 mm thick backing coat in CM 1:4 such as skirting dados and riser to step etc set jointed in neat cement slurry and pointed in white cement to match

S&F Joint free coloured glazed ceramic tiles 350 x250 x7 mm/450 x350 x7mm/450x300mmx7 mm /250x375x7mm thick on vertical surfaces including 10mm thick backing coat in CM 1:4 such as skirting dados and riser to step etc set jointed in neat cement slurry and pointed in white cement to match

S&FJoint free Non skid coloured ceramic tiles 400x400mmx7-8mm thick in floors laid over 15mm thick screed in CM 1:6 etc set jointed in neat cement slurry and pointed in white cement to match all as specified

M&L Vitrified ceramic coloured tiles with light shade 10 mm thick Square or Rectangular polished area of each tilles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick screed bedding in cement mortar 1:6 , all as specified

M&L Vitrified ceramic coloured tiles with light shade 10 mm thick Square or Rectangular polished area of each tilles not exceeding 1.00 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15 mm thick screed bedding in cement mortar 1:6 , all as specified

M& L providing precast cement concrete type C1, 1: 3 : 6 ( 20 mm graded aggregate) block masonary with solid blocks ,exc,10 cm in width and setting in CM 1 : 6 complete all as specified.

M& L providing precast cement concrete type C1, 1: 3 : 6 ( 20 mm graded aggregate) block masonary with solid blocks or slabs 10 cm thick (with plain or interlocking joints ) and setting in CM 1 : 4 complete all as specified.

Supply only integral water proofing compound all as specified.

M&L 20mm thick Granite (of any type) in Flooring (table rubbed and polished) and including 20 mm thick Screed Bed in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture pigments to match the shade of granite.

M&L 20mm thick Granite (of any type) For Wall /dado & skirting of riser of step (table rubbed and polished) including 15 mm thick rendering in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture pigements to match the shade of granite.

M&L chequered cement concrete tiles with grey cement and pigments 30 cm x 30 cm x 20 mm thick, set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bedding in cement mortar 1 : 6 complete all as specified and as directed.

Taking down cement plaster includiing raking out joints hacking for key and scrubbing down with water complete, all as specified and directed by Engiiner-in-Charge

M&L for Rendering 15mm thick on fair face of brick work or concrete surfaces in CM 1:4 finished including mixing water proofing compound as per manufacturer instruction complete all as specifed and as directed. Note ;- WPC will be measured and paid seperatly.

M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement all as specified

M&L Rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling finished even and smooth without using extra cement all as specified

M & L polythene film 150 micron thick laid on a coat of bitumen primer @ 0.30 kg/sqm

Taking down chowkats or frames not exd,1.50 sq m each

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames).

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m eachwith shutters (without taking off shutters from the frame)

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each and refixing in same opening.

Taking down existing aluminium door shutter with frame area exc 1.00 sqm but not exc 2 sqm and refixing in same opening after repair /replacement of the defective parts (the parts replace will be measured in relative item)

S&F in repair aluminium powder coated decorative curtain bracket

S&F in repair aluminium powder coated finial for curtain rod

S & F 2 nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,

S & F 2 nd class Hardwood 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: fixed to chowkats.

S & F 2 nd class Hardwood 30 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, with decorative face veneer on both sides with lipping/frame to match

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification.

S & F Aluminium anodised, barrel tower bolts 150 mm long of extruded section

S & F Aluminium anodised, barrel tower bolts 200 mm long of extruded section

S&F in repair Aluminium door closer hydraulically regulated, designation No 2, universal type, sutiable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg.

S & F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S & F in repairs MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S & F Aluminium handles,100 mm size cast type, anodised

S & F Aluminium handles150 mm size , cast type, anodised

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S & F Aluminium anodised Hasp & Staple, 100 mm size,with hinge pin including bolt to hinge plate and fixed with screws,

S & F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples

S & F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed

S & F Pre-laminated particle board,interior grade,18-19 mm thick prelaminated one side with decorative choice lamination & other side balancing white lamination .

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised of flaps size 30 mm (when open)

M & L for TMT bars 10mm dia & over cut to length bent to shape required including, cranking binding with & including MS wire not less than 0.90m dia or securing clips.

S&F powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, sliding windows and windows ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed by Engr-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators inclding providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fitting shall be paid seperately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS 1285, fixing with dash fasteners of reqwuired dia and size, including necessary filling up the gaps at junctions, ie at top, bottom and sides with required EPDM rubber/neoprene gasket etc aluminium sections shall be smooth, rust frees straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, CP brass/stainless steel screws all complete as per architectural drawings and directions of Engr-in-Charge

Taking down rain water pipe , eaves gutters, soil pipes,waste pipes (any size and pattern) including all fittings heads shoes bends swan necks etc

S & F Sheet glass 4mm thick, ordinary quality and glazing with clips in square exc 0.5 sq. m in each pane

S & F 4 mm thick, Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S & F ordinary sheet glass 4 mm thick exc 0.50 sq.m in repairs by removing /hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

Taking down steel tubing and connections 15 mm bore including cleaning for refixing or removal from site

Taking down steel tubing and connections 20 mm bore including cleaning for refixing or removal form site

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 250 ltr but not exc 500 ltr. (Cleaning repairing, etc. measured separately)

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 500 ltr but not exc 1000 ltr. (Cleaning repairing, etc. measured separately)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes of capacity exc 250 ltr but not exc 500 ltrs complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes of capacity exc 500 ltr but not exc 1000 ltrs complete all as specified and directed by Engr-in-Charge.

S&F Rotational moulded polyethelyne water storage tanks of capacity 500 ltrs (cylinderical vertical with closed top) hoisted and fixed in position including dismantling of existing tank complete all as specified in SSR Pt - I

S&F Rotational moulded polyethelyne water storage tanks of capacity 1000 ltrs (cylinderical vertical with closed top) hoisted and fixed in position including dismantling of existing tank complete all as specified in SSR Pt - I

S & F in repairs 15 mm bore CP bib tap fancy type of screwed,for pipes

S & F in repairs 15 mm bore CP pillar tap fancy type of screwed,for pipes

S & F in repairs 15 mm bore wall mixer for mixing hot & cold water of screwed,for pipes

S&F in repairs 15mm bore CP Stop valves/angle valve, fancy type chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in position

S&Fin repairs 20mm dia ball valves high pressure of PTMT epoxy coated aluminium rod & high density plastic ball complete all as specified & directed.

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm

S & F PVC (SWR) pipe grade ‘A’ single socketed 110 mm dia in any length, jointing with cement solvent solution, fixed to walls complete all as specified

S & F PVC (SWR) pipe grade ‘A’ single socketed 75 mm dia in any length, jointing with cement solvent solution, fixed to walls complete all as specified

S & F PVC (SWR) pipe grade ‘A’ single socketed 150 mm dia in any length, jointing with cement solvent solution, fixed to walls complete all as specified

S & F PVC(SWR) bend with acess door of any dia for 150 mm dia pipe complete all as specified

S & F PVC(SWR) bend with acess door of any dia provided with access door for 110 mm dia pipe complete all as specified

S & F PVC(SWR) bend with acess door of any dia provided with access door for 75 mm dia pipe complete all as specified

S&F PVC (SWR) branch piece,single (Single Y) equal or unequal 75 mm dia complete all as specified

S&F PVC (SWR) branch piece,single (Single Y) equal or unequal 110 mm dia complete all as specified

S&F PVC (SWR) branch piece,double (double Y) equal or unequal 75 mm dia complete all as specified

S&F PVC (SWR) branch piece,double (double Y) equal or unequal 110 mm dia complete all as specified

S&F PVC (SWR) juntion ,single (single T) equal or unequal provided with access door 75 mm dia complete all as specified

S&F PVC (SWR) juntion ,single (single T) equal or unequal provided with access door 110 mm dia complete all as specified

S&F PVC (SWR) juntion ,double (double T) equal or unequal provided with access door 75 mm dia complete all as specified

S&F PVC (SWR) juntion ,double (double T) equal or unequal provided with access door 110 mm dia complete all as specified

S & F in repairs vitreous china wash down water closet pan (pedestal pattern) white

S & F in repairs vitreous china squatting pan ,Orissa pattern size 580 x440 mm white,with integral foot rests

S & F in repairs 15 mm bore brass chromium plated shower rose 125 mm size with swivel joints,

S & F in repairs 10 ltrs capacity PVC valveless,syphonic action type flushing cistern,lowlevel,white,with,with inlet,ball valve,float and handle including brackets

S & F in repairs Vitreous china wash basin of size 550 x 400 mm ,white,flat back,

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S & F in repair Sinks made of stainless steel 1mm thick kitchen with plugs,washers and wastes;including bedding in cement mortar on to dwarf wall or including cantilever brackets and connecting union to pipe,overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm

S & F in repair tubular towel rail, 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats

S& F sheet glass shelf 5.5mm thick and 120mm wide with chromium plated bracket guard and railing 60 cm long all as specified and as directed.

S&F in repairs PTMT soap dish all as specified and as directed.

S&F PVC Bathroom Mirror cabinet of sized 550 x 450 mm (Make : Prayag, Nilkamal, Supreme)

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for providing and fixing stainless steel (Grade - 304) railing made of hollow tube channels, plates etc, including welding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolts etc, of required size, on top of floor or sides of waist slab with suitable arrangements.

M&L for providing and fixing 10 mm thick plaster of paris including for sunk or raised moulding ceiling (Gypsum anhydrous) to flat surface, GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2mm length) of 0.55mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and applying two coats of oil bound distemper including taking down existing complete all as specified and as directed

S&F 15mm dia brass CP health faucet with 1 mtr long flexible pipe with stand hook (Make : Essco, Prayag, Perryware)

S & F Stainless steel Butt hinges 100 mm size

S & F Stainless steel Butt hinges 75 mm size

S & F in repairs aluminium Deco grill 5.50 mm to 6.50 mm thick with necessary channels and clips DG 104

S&F 32 mm dia and 900mm long PVC waste pipe suitable for sink, WHB and urinal.

S&F in repair PVC lid for water storang tank of capacity 500ltrs of approved make.

S&F in repair PVC lid for water storang tank of capacity 1000 ltrs of approved make.

M&L fixing bldg number Plate made with Acrylic Sheet of Size 300mmx200mm and Alphabatic number writing with Radium Tape and fixed with screw complete all as specified and as directed by Engr - in - Charge

Material & Labour for complete removal of existing treatment of walls by washing down and smoothing old surface of walls/ ceiling, prerparation of surface by applying two coats of interior plastic emulsion over a coat of primer over a layer of smooth Putty finish two coats as per manufacture instruction with smooth roller finish ,complete all as specified and directed. (Note after painting ,cleaning of all floors,glass & furniture by own arrangement). . .

Material & Labour for complete removal of existing treatment by washing down and smoothing old/new walls surfaces including scrapping and applying two coats of oil bound distemper over a coat of primer as per manufacture instruction with smooth roller finish ,complete all as specified and directed. (Note after painting ,cleaning of all floors,glass & furniture by own arrangement).

M & L Preparing old plastered / decorated surface of wall including cornices etc by brooming down and applying one coat of oil bound distemper including smooth roller finish complete all as specified and directed by Engineer in Charge. (Note after painting cleaning of all floors,glass & furniture by own arrangement).

M & L Preparing old plastered / decorated surface of ceiling surfaces and one coat of oil bound distemper including smooth roller finish with complete all as specified and directed by Engineer in Charge. (Note after painting cleaning of all floors,glass & furniture by own arrangement).

M & L Preparing new plastered / decorated surface of ceiling surfaces and two coats of oil bound distemper including smooth roller finish with complete all as specified and directed by Engineer in Charge. (Note after painting cleaning of all floors,glass & furniture by own arrangement).

M&L for 3 mm thick wall care putty in layers and making even and smooth on ceiling Surfaces surfaces

M&L for 3 mm thick wall care putty in layers and making even and smooth of wall surfaces

M&L preparation of old plastered surfaces of wall and applying one coat of white wash all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coat of cement based paint all as specified and directed.

M&L Preparation of old plastered surfaces of ceiling and applying one coat of white wash all as specified and directed.

Material & Labour Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed .

Material & Labour Preparation of old painted on steel based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

Material & Labour preparation of old painted concrete surfaces of any description over 10 cm grith or width not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old surface of wooden of any description exc 10cm width or girth including cleaning and applying one or more coat french polish till achiving desired finish all as specified and directed by Engeer- in charge.

M&L for granules textured homogeneous wall finishing system including preparation of old surfaces consisiting of a two component system of dry granules (25 Kg per Pack) made of 92% silica particles coated with fade resistant pigment, 100% acrylic polymerbonding agent (5 Kg per pack ) with the applied thickness of the coating being between 0.8mm - 1.2 mm to be applied on curved, smooth level plaster without key, as per manufacture directions, for usages to be applied and approved applicator of the manufacture as per the ddirection/ supervision of the Engineer -in-Charge, all complete, The above texture coating should confirm to surface spread of flame class one of BS 476 : Part 7 : 1971 and pull off strength of the coating to meet JISA 6909 on smooth plastered surfaces all as specified and as directed by Engr-in-Charge. Make : Bakelite Hylam Limited or equivalent make approved by the GE

Preparation of new plastered surfaces of old and new walls/Ceiling and applying two coats of acrylic emulsion exterior grade (100%) over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered of wall/ceiling surfaces and applying one coat of acrylic emulsion exterior grade (100%) complete all as specified and as directed

M&L for application of Grit finish plaster on external wall surfaces as it shall be with washed stone grit plaster on external walls in two layer, under layer 12 mm cement plaster 1 : 4 following the under layer with scrapping tool, applying cement slurry on the under layer @ 3 Kg of cement per Sqm, top layer 15 mm thick ement plaster 1 : 1/2 : 2 (1 Cement, 1/2 course sand, marble stone chipping - 10 mm nominal (size) in panels with groove all around with approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone, chipping complete specified. Silicon water repellent shall be applied in one coplous application strictly in accordance with manufacturer instructions including taking down existing plaster.

M&L for applying textured finished paint of any colour and any pattern over a coat of base paint and making the surfaces even and smooth with putty including complete removal of existing treatment on wall surfaces complete all as specified

Dismantling of sett paving any description of thickness laid dry or laid dry and pointed

M&L M-35 grade 60 mm thick machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 complete all as specified

M&L M-40 grade 80 mm thick machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 complete all as specified

Fixing only machine pressed precast concrete interlocking paver block any shape and size compllete all as specified

M&L Sand filling under floors are in foundation including watering and consolidation complete.

M & L cement concrete type C-1, 1:3:6 (20 mm graded stone aggregate) as in copings, packing around chequered tiles, interlocking paver.

M & L Providing, cement concrete Type B-1 1 :2 :4 (20 mm graded aggregate) rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Excavation in trenches n.exc 1.5m wide n.exc 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Demolition and breaking up 150mm dia drain pipes (salt glazed, AC or reinforced concrete)set in cement mortar

M&L for PCC 1 :4 : 8 type D-2 (using 40 mm graded aggregate) Concrete bed to 150mm dia drain pipes including packing under, and haunching against the sides of pipe after they are laid and tested.

S&F 150mm dia bore reinforced concrete pipes, class NP2 with one collar per length of pipe

Taking out/Pumping out sewage water from septic tank/soakage well from Tractor with attached Water Tank of 3000 ltr capacity with mechanical pump and Sucking and removing and dumping off the same to a place out side cantonment at the place marked for the purpose by the authority controlling the area complete all as specified and as directed by Engineer-in-charge, distance for removal from original point to disposal point is out of defence land

Taking out/pumping out silt, brick bats debris liquid waste sludge in solid/semi solid state from Manholes including pumping out sludge wherever necessary by plugging /diverting the flow in the sewage line if necessary and staking the removed silt/sludge and deposit away from the edge of manholes at the place marked by the authority controlling the area and including use of safety belt dry cells torch for lighning in side the manholes as directed and cleaning the manholes with clean water etc all as specified and as directed by Engineer-in-Charge of the following:- a) Manholes not exc depth of 1.0m

(b) Manholes depth exc 1.0m but not exc 2.0m

Desludging of septic Tanks including digestion pits etc manually for cleaning them thoroughly and removing muddy soil/ sludge to a distance not exc 500mtr and buried it in pits or other wise disposed off outside cantt area from septic tank, etc by means of honeysuckers mechanical septic tank cleaning truck of with diesel driven in nearest drain as directed by Engr - in-Charge

M&L for cleaning of underground sump of 1.00 Lakh ltr capacity by bailing out the water in the sump below foot valve level, removing the sludge and scale out the floors, walls etc. removing green algae, with wire brush by applying bleaching powder, washing the surfaces with fresh potable water including removal of sludge and other materials to a distance not exceeding 50m, complete all as specified and as directed by Engr-in-Charge.

Bharat Enterprise

K B N TRADERS

SURESH ELECTRICALS

Vastushilp Building Designer

JAY BHARAT METAL SUPPLIERS

BABUBHAI BHIMABHAI PANDAVADRA

Nitesh Enterprise