CSR(NMDC) Funds

Clearing and Grubbing of Bush and Julifora clearance of light jungle before its removal and stacking away from site and burnt into ashes MAT-00482

Augoring and boring of holes in site and under reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with augoring and boring equipment as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of different diameter , inclding RCC M-25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges , seigniorage charges for finished item of work 375mm Dia meters of 3.75 m Length DUR Piles

Augoring and boring of holes in site and under reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with augoring and boring equipment as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of different diameter , inclding RCC M-25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges , seigniorage charges for finished item of work 250 mm Diameter of 2.75 m Length S.U.R Piles

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Filling in foundation with Stonedust trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Foundations.

Plain Cement Concrete corresponding to M 5 grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Flooring (APSS No. 402)

V.R.C.C. M-25 Design Mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering for Pilecaps

R.C.C. M-25 Design Mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering for Columns

R.C.C. M-25 Design Mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., including centering, shuttering for Plinth Beams

Filling in foundation with Stone Dust trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Brick Masonry in CM (1:6) with Bricks using 2nd class traditional Bricks of size 23 x 11 x 7 cms from aaapproved quarry and having minimum crushing strength of 40 kg/ sq cm including cost and conveyance of all mateials like cement , sand , bricks , water etc to site including seignorage charges , sales and other taxes on all materials , and such as labour charges like mixing cementmortar , scaffolding charges , constructing masonry lift charges , curing etc complete for finished item of work ( APSS No 501 & 504) for Basement

RCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering for Roof Beams

R.C.C. M-25 Design Mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering for Roof Slab

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Brick Masonry in CM (1:8) with Bricks using 2nd class traditional Bricks of size 23 x 11 x 7 cms from aaapproved quarry and having minimum crushing strength of 40 kg/ sq cm including cost and conveyance of all mateials like cement , sand , bricks , water etc to site including seignorage charges , sales and other taxes on all materials , and such as labour charges like mixing cementmortar , scaffolding charges , constructing masonry lift charges , curing etc complete for finished item of work ( APSS No 501 & 504) for superstructure

R.C.C. M-25 Design Mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering for Lintels

R.C.C. M-25 Design Mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, including centering, shuttering for Sunshades of 7.50cms thick at fixed end and 5.00cms thick at free end .

Ornamental Plastering to ceiling 8 mm thick in two in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work

Plastering 12mm thick in CM (1:5) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water, etc., to site, cost of seigniorage charges and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for walls

Providing High Yield Strength Deformed (HYSD/Thermo Mechanically Treated (TMT)/Mild Steel (MS) steel bars (Fe 500 graded as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors (APSS No. 126)

Providing MS Grills of 8mm to 40mm diameters, cutting, bending & forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes complete for finished item of works.

Providing and applying wall putty of white cement or cement based or paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean and wipe off loose dust. applying knifing paste filler by putty knife/muslin pad, air dry for 2-3 hours, sand with 180 and 320 Nos emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete, for finished item of work for internal walls. (Sl.No: 18 of SSR Data) InsideBuilding

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for interior walls

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for exterior walls

Flooring with Double Charged stain free porcelain Vitrified tiles of size 600 X 600 mm and thickness between 8-10 mm Ist quality confirming to IS:13711, IS:13712, IS:13630 of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials for Ground Floor.

Providing skirting to internal walls to 10 cm height/risers of steps with Vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Flooring with Non - Skid Ceramic tiles of size 300 mm x 300mm of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Painting to New Iron work with two coats of ready mixed first quality synthetic enamil paint including cost and conveyance of all materials and labour charges

Supply and fixing of Flush Door shutter with 25mm thick sal wood frame size 1.20 X 2.1 mts including fixing of 2 Nos of verticals and 1 Nos of Horizontals of size 9.50 X 7.50 cms including fixing of 4 Nos of M.S. Hold fasts, 3 Nos. of 125mm long Alluminium Butt Hinges, 2 Nos of 150mm long Alluminium Tower Bolt, 30mm thick solid bond wood block board type with Commercial ply on both faces and laminated with a thin decorative film Flush Door shutter and 2 Nos. of 150mm long Alluminium Door Handles, 1 Nos of 300 mm long Alluminium Aldrop including cost and conveyance of all materials and labour charges etc., complete. (APSS NO.1001 & 1002)

Providing and fixing factory made UPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi- chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent. Two track two panels sliding window made of (small series) frame 67 x 50 mm &sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and double glazing bead of appropriate dimension (MAT-05449)areaof window 1.75 sqm to 2.50sqm)

Cost and Supply & fixing of Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for - 304 Grade including Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish

Electrical Items Sub Estimate:Supply and Fixing of 25mm dia2.20mm thick PVC pipe (ISI MARK) concealed in walls with all required accessories including masonary work and labour charges etc., complete

Supply and Fixing of 20mm dia 1.8mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) Goldmedal FR P.V.C. insulated flexible copper cable(ISI Mark) in existing pipe for mains including all labour charges etc., complete

Supply and run of 1 of 14 /0.3mm (1.0 Sq.mm) Goldmedal FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 8 modular cover frame covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings using Modular Switches

Supply and fixing of 6A 3 pin wall plug Modular socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete using Modular Switches and Sockets

Supply and fixing of 16A 3 pin wall plug socket with 16A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply,Transportation and fixing of 20W, 2000 lumens, 1200 mm length LED batten light, input voltage AC 220-260 Volts with PF>0.9, surge protection : 2KV,THD<15%, with inbuilt driver and and frosted cover CCT:3000K-5700K, minimum CRI>80, etc., complete including cost and conveyance of all materials including frame and tube etc., complete

Supply and errecting Modular type Electronic stepped type regulators for Ceiling fans complete errected on existing board

Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories

Sanitary & Water Supply Items Sub Estimate :Providing and placing on Terrace Polyethylene water storage tank with double layer approved brand & manufacture with cover and suitable locking arrangements & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 110mm dia 4 Kg/sqcm PVC/ SWR Pipes including cost and conveyance of all materials and labour charges etc., complete

upply and fixing of 75mm dia 4 Kg/sqcm PVC/ SWR Pipes including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of European Water Closet of Ist quality confirming to IS: 2556-part-2-1973 of Hindustan/Neycer or Parryware make white glazed with 'P' trap including cost and conveyance of all materials and labour charges etc., complete

Supplying and fixing of Indian make Flat Back Wash Basin 1st quality ISI marked conforming to IS: 2556-Part-4-1972 with waste fittings like rubber plug, chain, 32mm nominal size C.P. fitting with parallel pipe thread confirming to IS: 2963-1979 and fitted with 15mm nominal bore chromium Plated Pillar Tap of Ist quality Indian make 300 grams Seiko or equivalent complete with standard CI brackets including wooden block including cost and conveyance of all materials and labour charges etc., complete of size 450 X 350 mm Single C.P. Pillar Cock

Supplying & fixing stainless steel sink size 20" x 18" x 8" (508x457.2x203.2mm) 1 mm thick with accessories fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces , overheads & contractors profit complete for finished item of work in all floors

Supplying and fixing of N.P. Bib Tap 12.7mm dia Indian make300 grams including cost and conveyance of all materials and labour charges etc., completed

Supply and fixing of 28.60 mm OD CPVC Pipe - SDR 13.5 Pipes including cost and conveyance of all materials and labour charges etc., complete

Supply and fixing of 22.2 mm OD CPVC Pipe - SDR 13.5 Pipes including cost and conveyance of all materials and labour charges etc., complete