DEMOLITION OF BUILDING NO T 102 AT SVN COLONY PROVN OF WATER TANK AND ALLIED WORKS AT BUILDING NO P 70 AND P 71 AT MEGHADRIPETA COLONY AS AND AS TO BALCONY PARAPET IN E AND F BLOCKS AT NIRMAN PARK AND PROVISION OF SHED FOR 10 KVA DG SET BEHIND ADMIN

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.

Taking down of chowkats or frames exc 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and directed

Dismantling framed trusses n exc 10 m complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Demolition of un-reinforced cement concrete above ground floors and pavings exceeding 15 cm thickness, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) complete all as specified and directed.

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate as in flooring /plinth protection finished even and smooth without using extra cement complete all as specified and directed

M & L for 100 mm thick PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate as in flooring rough finished for receiving the top layer complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over and including sand cushion of compacted thickness 50 mm complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces in CM (1:4) and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Prepration of newly plastered wall surface by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying two coats of cement based paint by using auto roller or airless sprayer machine over a coat of primer complete all as specified and directed

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

S&F 3 layered PP-R Polypropylene random copolymer concealed pipes 20 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all necessary fittings laid concealed in walls including cutting chases and makes the walls good as per existing finishes complete all as specified and directed

Supply and fixing PP-R Gate values (brass insert) of 20 mm dia with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks two layered (ISI Marked) 1000 litres capacity(cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tanks complete all as specified and directed

S & F in repairs 15 mm bore chromium plated bib tap fancy type cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore Stop valves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 20 mm dia ball brass value , high pressure, with polythane float and flynut complete all as specified and as directed.

Taking down eaves gutters & rain water pipes ( any size or pattern) including all fittings , heads, shoes , bends, swan- necks, etc including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings & accessories) complete all as specified and directed .

S&F 110 mm dia PVC (SWR) pipes single socketed in any length , with rubber ring joints fixed in walls complete all as specified and directed.

S&F 110 mm dia bore PVC (SWR) bends complete all as specified and directed .

S&F ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.

Demolition of RCC of any description and in any position ( reinforcement cut as required to facilitate demolition ) and removing rubbish to a distance exceeding 1.50 KM and not exceeding 5.00 KM complete all as specified and directed .

M&L RCC 1:11/2:3 type A1 (using 20 mm graded crushed stone aggregate ) as in fins, facias, louvers, parapets and railing exceeding 60 cm in height complete all as specified and directed.

M&L for Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L for Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of up to 8 mm dia , cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M & L for form work to faces of walls, retaining walls, abutement, parapet and staircase, railings and similar works including attached pillasters buttresses, rough finished surfaces complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4) Mixed with water proofing compound @ 3% of weight of cement complete all as specified and directed. Note :Water proofing compound shall be measured and paid separately

Supply only liquid water proofing compound of approved quality complete all as specified and directed.

Prepration of newly plastered wall surface by using vaccume based hand held or long handle sander machine and cleaning the surfaces by using Jet washer and applying 3 mm thick cement based wall putty by using automatic putty sprayer, (the putty shall be mixed with multipurpose mixer only) to achieve even and smooth surfaces and applying two coats of exterior weather proof (100% acryllic paint) by using auto roller or airless sprayer machine over a coat of primer complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface and getting out in hard/dense soil complete all as specified and directed.

M & L for PCC 1:3:6, type C-2, using 40 mm graded crushed stone aggregate in foundation fillings and mass concrete complete all as specified and directed

S&F for 0.50 mm thick pre-painted corrugated /'Z' profile galvalume roofing sheets as in roofing (in any location and any type) having high strength steel with minimum 550 Mpa strength hot dip coated with aluminium zinc alloy (55%aluminium and 45% zinc ) pre-painted with primer coat of 5 micron and coated with silicon modified polyester coating of 20 micron and alkalysed coating of 10 micron on reverse side. End rib, side over lap and over lap of sheets shall be designed for anti capillary activties to avoid any seepage of water through lateral overlap as per manufacturer's instructions, including fixing with self drilling and self tapping screws 5mm dia full threaded, all Kautex coated and fitted with EPDM washers in stainless steel. the screws shall be coated with anti-corrosive substance to ensure longer life and shall be fixed using drill guns for lead proof installation. Screws shall be of 'HILTI' make or equivalent as approved by GE , complete all as specified and directed. Note:- The quoted rates shall deemed to be inclusive of all the scaffoldings, ladders, cranes etc and T&P to reach roofs to fix the sheets , tenderers are advised to visit the site and quote their rates accordingly and no claim or nothing extra shall be admissible on this account at any later stage

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed

S&F Mild steel Plates ( plain or chequered ) channels,square cut or notched (ordinary and counter sunk ) with welded attachment of grade Fe 410-W (Gde- E- 250) quality-A complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer by using auto roller or airless sprayer machine complete all as specified and directed

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for hardcore of broken stone of guage not exceeding 63 mm deposited,spread and levelled in layers not exceeding 15 cm thick , water and ramed to a true surface complete all as specified and directed.

M & L for 50 mm thick PCC 1:2:4, type B-2, using 40 mm graded crushed stone aggregate as in flooring /plinth protection finished even and smooth without using extra cement complete all as specified and directed

SRI RAJA RAJESWARI ENTERPRISES

Sri Venkateswara Constructions