Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.9 LAccepted-AOC POLICE LINE ROAD KUMOUR PITHORAGARH | L1 | Accepted-AOC Overall accepted | |
| 2 | L2₹50.0 L+₹16,006.60 (0.32%)Rejected-AOC | L2 | Rejected-AOC Overall disqualified | |
| 3 | Rejected-Technical | - | Rejected-Technical The Bidder did not qualifies the TQR |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
17 Apr 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Office of SE, OandM Circle, PTCUL, Haldwani
Construction of store room at 132KV S/s, Almora under OandM Division, PTCUL, Almora
2023_PTC13_56428_1
SE(OandM)/PTCUL/HLD/59/2022-23
Open Tender
Civil Works - Buildings
Item Rate
180 days
132KV S/s, Almora
Please refer Tender documents.
5 documents required · 5 mandatory
₹5,900
EE, OandM Division, PTCUL, Almora
₹1.7 L
Office of SE, OandM Circle, PTCUL, Haldwani
3 Aug 2023
18 Mar 2023
18 Apr 2023
18 Mar 2023
17 Apr 2023
18 Mar 2023
3 Apr 2023
Earth work in excavation by mechanical means (hydraulic excavator)/ manual means in revetment work including disposal of surplus excavated soil as directed, with all leads and lifts, disposed earth to be neatly levelled and dressed. (in ordinary Rock/DFR/SFR)
Earth work in excavation by mechanical means (hydraulic excavator)/ manual means in foundation or pits of any size, including dressing of sides and ramming of bottom including getting out the excavated soil as directed, with all leads and lifts. (in ordinary Rock/DFR/SFR)
Random rubble masonry work hard stone in foundation and plinth including levelling up with cement concrete 1cement:6coarse sand:12 graded stone 20mm nominal size) upto plinth level with cement mortar 1:6
MS Steel Bar (Including Supply)
Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering finishing. All the work up to plinth level (1cement:1.5coarse sand:3graded stone aggregate 20mm nominal size M20)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering (1cement:2coarse sand:4graded stone aggregate 20mm nominal size)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4
12 mm cement plaster of mix 1:4
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
Finishing walls with Acrylic Smooth exterior paint of required shade : ( New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters (80x1.25 mm M.S. laths with 1.25 mm thick top cover)
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. (Using M.S. angels 40x40x6 mm for diagonal braces)
Providing and fixing T-iron frames for ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.(Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete (Fixed to steel windows by welding)
Megha Sales
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .