LAC ADS (2018-2019), Eranad LAC - Construction of bridge in Mukkatta - Kollam Kolli road - Urangattiri GP, Work Proposed By Hon. MLA Shri. P K BASHEER (ID 7910)

Amount

Culvert Work

11.1.1.1 : Excavation for StructuresEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.I.Ordinary soil(i)Upto 3 m depth

11.4.1.1 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203I.P.C.C grade M 10(i)Nominal mix 1:3:6

12.5.1.1 : Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204For height upto 5 mI.P.C.C grade M 15(i)Nominal mix (1:2.5:5)

od331093/2019_2020 : RING BUND Type II Putting up ring bund with earth fille gunny bags of top width 1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work.etc.complete.

od331094/2019_2020 : Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

od331101/2019_2020 : DOWEL BARS - Supplying and providing MS dowel bars of size 16 mm dia of 2m long (1m in rock and 1m in concrete ) including drilling holes of 20mm dia to a depth of 1m in rock and filling the gap with cement grout( 0.10kg/each) etc complete.

12.5.3 : Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204For height upto 5 m III.R.C.C grade M 20

13.1.2 : Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5R.C.C M 25

12.7 : Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202

13.3 : Supplying, fitting and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002,1010 and 1202

od197266/2019_2020 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course<br>masonry with good quality blasted rubble including packing to compactness to<br>lines and levels cost and conveyance of all materials labour charges etc.<br>complete as per direction of Departmental officers at site<br>

11.4.4 : Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203IV.R.C.C grade M 20

od197271/2019_2020 : Filling with contractor own earth (excluding rock) in open areas in layers not<br>exceeding 20 cm in depth, consolidating each deposited layer by ramming and<br>watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-incharge.

od197272/2019_2020 : Filling up low lying and water logged areas with local material/ quarry muck,<br>spreading in layers, leveling the top at site and consolidation by ramming, etc

od197278/2019_2020 : :Providing concrete for plain/reinforced concrete in open foundations complete as per<br>drawings and technical specifications Clause 802, 803, 1202 & 1203<br>III.P.C.C. grade M 20<br>(i)Nominal mix (1:2:4)

Name board

od376252/2019_2020 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.<br>Granite of any colour and shade<br>Area of slab upto 0.50 sqm Lettering and fixing

A. Sajid Babu

M. SHABEER

Bidder Name

A. Sajid Babu

M. SHABEER

majeed cherumanakkadan