Urgent maintenance work at pump house, work include painting, GI roof sheet work etc

Amount

Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) grade excluding the cost of centering and shuttering - All work up to plinth level

Providing and laying in position reinforced cement concrete of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) grade, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level

Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work in Thermo-Mechanically Treated bars of grade Fe-500D or more.including straightening, cutting, bending, placing in position and binding all complete upto plinth leve

Solid concrete block (75kg/cm2) masonry in cement mortar 1:6 using concrete brick of size 40x20x12cm upto plinth level including cost and conveyance of all materials and labour charges etc. complete.

Random rubble masonry with availaible dismantled hard stone in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Steel work in built up GI tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Repair to G.I./MS pipes hand rail, including cutting, welding, scraping with sand paper, applying priming coat of approved steel primer, etc.

Providing welded mesh 25x25x 10g on 25mmx25mmx4mm angle welded with a coat of iron primer including cost and conveyance of all materials and labour charges etc. complete.

Laying dismantled A.C corrugated sheet with G.I bolts and nuts, plates washer and bitumen washers 150 mm overlap and ends etc. including all labour charges but excluding cost of AC sheet etc. complete.(with dismantled AC sheets)

Providing GI powder coated trafford sheets 0.50mm or nearest available thick with GI bolts and nuts plate washers and bitumin washers, M seal and 150mm overlap at ends including cost and conveyance of all materials and labour charges etc.complete

Providing hip or valleys in powder coated GI sheet 0.6mm or nearest fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete

Providing 200mm or nearest available size PVC gutter square type with necessary clamps, bolts, nuts and specials such as nozzles sockets stoppers etc. including cost and conveyance of all materials and labour charges etc. complete as per the instructions of the dept. officers

Plastering with C.M. 1:4 (one cement four sand), 12mm thick for walls inside and outside with necessary scaffolding and thread lines, including cost and conveyance of all materials and labour charges etc. complete.

Providing and laying 150mm fibremesh with cement grout for reinforced plastering including the cost of fibre mesh and grout with cost and conveyance of material, complete, etc

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Painting with two or more coats synthetic enamel paint using brush/roller on new work of approved brand and manufacture to give an even shade :

Floor polishing on masonry or concrete floors or red oxide with wax polish of approved brand and manufacture.

Wall painting with two coat premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Painting with synthetic enamel paint one or more coats on old work of approved brand and manufacture of required colour to give an even shade

Finishing walls with water proofing cement paint of required shade over old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.

Finishing walls with old work (One or more coat applied @ 0.90 ltr/10 sqm) Acrylic Smooth exterior paint of required shade :

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Renewing float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm), with wooden fillets wherever necessary

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

aking out existing door/window shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling steel work in channels, angles, tees and flats sections including dismembering and stacking within 50 metres lead in:

Dismantling roofing including ,Asbestos cement sheet, ridges, hips, valleys and gutters etc., and stacking the material at the Engineering Unit store as per the instruction of Engineer-incharge:

Chipping and removing the damaged portion of R CC beams columns slabs etc. carefully without damaging the existing structure including removing the debries scrapping with emery paper/wire brush for removing the rusted portion from the reinforcement apply one coat of adhesive epoxy resine such as NETTO BOND EP including cost and conveyance of all materials and all labour charges etc. complete.

Biju M T