Repair and Renovation of COVAS Block 2 CSKHPKV, Palampur. (SH- External and Internal Painting roof repair and Porch covering with prepainted sheet)

Amount

Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with Cement Mortar 1:5 (1Cement : 5 Sand) including entire carriage of material within all leads, lifts upto all floor level and heights.

Providing and fixing Steel work welded in built up sections, trusses and framed work,including cutting, hoisting fixing in position and applying a priming coat of red lead paintincluding entire carriage of material within all leads, lifts upto all floor level and heights.(Amba/Kamdhenu/Jai Bharat make)

In trusses and trussed purlins in building.

In gratings framed guard bars,ladders,railling,brackets and similar works.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including entire carriage of material within all leads, lifts upto all floor level and heights. (Tata Duroshine make)

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including entire carriage of material within all leads, lifts upto all floor level and heights. (Tata Duroshine make)

Providing and fixing MS BP sheet 1.66 mm thick in eaves board /fascia /soffits/ceiling including cutting, fixing and welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer –in- charge (Base members of steel work shall be measured & paid separately)including entire carriage of material within all leads, lifts upto all floor level and heights.

Demolition above G.L.upto floor two level including disposal of unserviceable materials within 20 metres lead un-reinforced cement concrete more than 15cm. Thickness including entire carriage of material with in all leads and lifts.

Providing and laying cement concrete 1:2:4 (1Cement :2 sand :4 graded crushed stone aggregate 20mm nominal size) excluding cost of form work in Foundation and plinth by using mechanical mixer & vibrator including entire carriage of material within all leads & lifts.

Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in Foundation and plinth by using mechanical mixer & vibrator including entire carriage of material within all leads & lifts.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded crushed stone aggregated 20mm nominal size) including entire carriage of material within all leads & lifts.

Providing and laying Duro stone vetrified tiles (300x300mmx10mm) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.(Kajaria/ Nitco/Somany make) including entire carriage of material within all leads and lifts

Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses 0.63 mm thick sheet (Tata make) including entire carriage of material within all leads, lifts upto all floor level and heights.

Providing and fixing plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) 4mm thick including entire carriage of material within all leads, lifts upto all floor level and heights.

Providing & fixing 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortar 1:6 (1Cement:6 Sand) including entire carriage of material within all leads, lifts upto all floor level and heights.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.including entire carriage of material within all leads, lifts upto all floor level and heights.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface completeincluding entire carriage of material within all leads, lifts upto all floor level and heights.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including entire carriage of material within all leads, lifts upto all floor level and heights.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including entire carriage of material within all leads, lifts upto all floor level and heights. (Nerolac/Asian 1st quality make)

Painting one coat (excluding priming coat)on previously painted concrete/masonry/plastered surface with readymixed paint/brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with Paint other than white including entire carriage of material within all leads, lifts upto all floor level and heights. (Nerolac/Asian 1st quality make)

Extra for every subsequent coat of paint Paint other than white including entire carriage of material within all leads, lifts upto all floor level and heights. (Nerolac/Asian 1st quality make)

Painting one coat(excluding priming coat) on previously painted steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter With Enamel paint other than white including entire carriage of material within all leads, lifts upto all floor level and heights. (Nerolac/Asian 1st quality make)

Extra for every subsequent coat on steel and other metal surfaces With Enamel paint other than white including entire carriage of material within all leads, lifts upto all floor level and heights. (Nerolac/Asian 1st quality make)

Painting one coat(excluding priming coat)on previously painted wood and wood based surfaces with readymixed flat oil paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter and sand papering and stoppingincluding entire carriage of material within all leads, lifts upto all floor level and heights.(Nerolac/Asian 1st quality make)

Extra for every subsequent coat of paint including entire carriage of material within all leads, lifts upto all floor level and heights. (Nerolac/Asian 1st quality make)

Applying modrent solution on new G.I sheet for preparation of surface for painting @ 5 litres/100 sqm.of surface and rubbing the solution with brush including thoroughly cleaning the surface of all oil grease dirt and other foreign matterincluding entire carriage of material within all leads, lifts upto all floor level and heights.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete.With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome including entire carriage of material within all leads, lifts upto all floor level and heights. (Nerolac/Asian 1st quality make)

Painting two coats (excluding priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter With white readymixed paint including entire carriage of material within all leads, lifts upto all floor level and heights. (Nerolac/Asian 1st quality make)

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within 20 metres lead.G.I. Sheet roofing including entire carriage of material within all leads, lifts upto all floor level and heights.

Providing ridges or hips 60 cm over all in plain G.I.sheet with galvanised iron J or L hooks bolts and nuts 8mm dia G.I. Limpet and bitumen washers complete 0.63 mm thick sheet (Tata make).including entire carriage of material within all leads, lifts upto all floor level and heights.

Providing valleys 90 cm over all in plain G.I. sheets fixed with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.63 mm thick sheet including entire carriage of material within all leads, lifts upto all floor level and heights.

Providing 10 mm thick plaster of paris (Gypsum unhydrous)ceiling upto a height of 5 metres above floor level over first class kail wood stripes 25mmx6mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be measured and paid for separatly) Flat surfacesincluding entire carriage of material within all leads, lifts upto all floor level and heights.

Less credit of CGI sheet.

Rajesh Bhatia