Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.6 LAccepted-AOC | L1 | Accepted-AOC being L1 | |
| 2 | L2₹8.7 L+₹8,930 (1.04%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹9.0 L+₹40,560 (4.73%)Rejected-Finance PREM SAROVAR HOTEL NAINITAL 263 001 UTTARAKHAND | NAINITAL | UTTARAKHAND | 263001 | L3 | Rejected-Finance Not being L1 |
Tender Value
₹8.7 L
EMD Value
₹17,500
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE(I)(AF) BHOWALI
BHOWALI, NAINITAL
ADDN/ALTN TO SNCOS MESS AT AF STN BHOWALI.
2022_MES_561754_1
8040/E8
Open Tender
Civil Works
Item Rate
180 days
BHOWALI
REF TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
AGE(I)(AF) BHOWALI
₹17,500
Yes
6 Apr 2023
5 Nov 2022
8 Dec 2022
5 Nov 2022
5 Dec 2022
21 Nov 2022
5 Nov 2022 - 19 Nov 2022
Amount
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in verical surface such as dado/lkirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cment mortar 1:4 complete all as specified.
Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified.
M&L 15 mm thick screed bed in CM (1:6) as in sub base of floor complete all as specified and directed.
M&L brick work with sub class 'B' bricks old size best quality bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) all as specified and directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation on new plaster surfaces and applying two coats of OBD over one coat of 3mm thick wall care putty and a coat of primer complete all as specified and directed.
M&L rendering 10 mm thick in cement mortar 1:6 on wall of brick work or concrete surface, finished fair and even all as specified and directed.
M&L for preparing the new plastered surfaces and applying two coats of cement base paint on walls over a coat of primer complete all as specified and direcrted.
S & F 25 mm dia, stainless steel curtain rods including brackets and latto complete all as specified and as directed by Engineer-in charge.
Excavating in post hole in hard dense soil each n exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed wwith earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified.
M & L for PCC(1:3:6) using 40 mm graded aggregates as in foundation, filling and mass cocrete complete all as specified.
S&F tubular steel trusses including special shape washers etc. including for columns complete using ERW or induction butt welded tubes confirming to IS -1239 -1997 GRADE ST-240 complete all as specified and directed by Engineer in charge
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified by Engr in charge.
S & F mild steel framed work for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
S & F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; hold fasts, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
Demolition of cement concrete (unreinforced) not exceeding 15 cm thickness including floor finishes any type (below or above ground level) complete all as specified.
M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base all as specified and directed.
M&L Chequred cement concrete tiles 30cmx30cmx 25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified.
M&L 20mm thick screed bed in CM (1:6) as in sub base of floor complete all as specified and directed.
M & L for preparation of new or previously untreated steel and iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for power coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows ,ventilators and partions (Fixed portion) with extruded built up standard tubular section /appropriate Z section and other sections of approved make conforming to IS 733 and IS : 1285,fixing with dash fasteners of required dia and size, incl necessary filling up the gaps at junction,i.e. at Top,bottom and sides with required EFDM rubber/neoprene gasket etc.Aliminium section shall be smooth ,rust free,straight,mitred and jointed mechanically whereever required including cleat angle.aluminium snap beading for glazing/paneling,CP brass/stainless steel screw all complete all as specified and directed.
S&F of 4.80 mm thick sheet glass ,ordinary quality and size exc 0.50 Sqm and fixed to aluminium door shutter and partition wall by means of glazing clips rubber strips etc complete all as specified.
M&L for aluminium composite panel sheet 5mm thick as in door , windows ,ventilators and partions complete all as specified.
S & F Solid PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
M&L for 75mm dia PVC floor trap, with grating including jointing with solvent cement complete all as directed and specified
S&F for 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to wall all as specified.
M M CONSTRUCTIONS
Ramsons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .