Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 218 2ND FLOOR U S COMPLEX 120 MATHURA ROAD NEW DELHI 110076 | SOUTH | DELHI | 110076 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance 1 NO 5 29 LALITHALAYA APARTMENTS PANCHALIAMMAN KOIL STREET ARAMBAKKAM CHENNAI | CHENNAI | CHENNAI | TAMIL NADU | Admitted-Finance |
| 4 | Rejected-Technical | Rejected-Technical Not Technically Qualified |
Tender Value
₹45.3 L
Closing Date
25 Nov 2021, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Associate Vice President (FM)
Facility Management Division, HLL Lifecare Limited, Corporate Head Office, HLL Bhavan, Golden Jublee Block Poojappura.P.O, Thiruvananthapuram, 695012, Kerala, India
Setting up of Office Cabin at 6th Floor of Golden Jubilee Block, HLL Lifecare Limited, Poojappura, Trivandrum
2021_HLL_94016_1
HLL/FMD/CHO/2021-22/019
Open Tender
Miscellaneous Works
Item Rate
45 days
Thiruvananthapuram
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,500
Yes
HLL Lifecare Limited
Exempted
6 Jun 2023
8 Nov 2021
26 Nov 2021
8 Nov 2021
25 Nov 2021
8 Nov 2021
Amount
DEMOLITION WORKS
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. In cement mortar of area beyond 3 sqms
Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge
CIVIL WORKS
Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2 level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
12 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand)
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall 25 mm nominal outer dia pipes
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 litre PVC. automatic flushing cistern
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.
Providing and fixing CP Brass 32mm size Bottle trap of approved quality & make and as per the direction of Engineer in charge.
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.waste fittings complete.Semi rigid pipe 32 mm dia
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Providing & fixing of CP Health faucet. Hand operated spray unit (instand Type).
Supply and fixing PVC floor trap self cleansing design with or without vent arm complete, including providing and fixing SS grating with rim including setting in floor with white cement mortar and making good the floor (Chilli make) 125mm dia
Cutting and preparing trenches of below size for race way ,including maintaining the least possible spreading of the dust and dumping of the removed and disposing off the concrete outside the premises and fixing of the race ways in mortar cm 1:2 ( 1: part cement and 2: part sand) with admixture finishing to the line and level matching the existing screed etc complete.75-150 mm (W) x 50 mm(Thk)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness
INTERIOR & ALLIED WORKS
Providing & fixing full height glazed partition up to 2290 mm height with 10 mm thick plain toughned glass as per design fitted over anodized aluminium slim line series partitions of size 45mm x 25mm size embedded in the floor and supported at top as detailed. The partition frame work above false ceiling to be fitted firmly to the true ceiling with necessary anchor fasteners. All the edges of glass shall have pencil nosing and machine polished. The joints in glass shall be filled with colourless silicone sealant as per manufacturer specifications. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer /Architects.
Providing and fixing 4-5mm thk ACP sheet including providing and fixing of frame work made of special section aluminium channels, consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs etc as per approved methods as instructed by the engineer in charge
Providing & fixing in position Pillar panelling on RCC / columns in 2-3mm thick aluminium composite panel with required frame support, all material of approved makes & colour , with necessary labour, hardware, cleaning, placing in position etc. complete.
Aluminium framed doors with ACP & glass on top with required lock, handle and other accessories
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc to be paid separately)
Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System of size 600x600mm with Optra mineral fibre (Bev-tegular) edge tiles with approved 15 mm exposed grid. The tiles should have Humidity Resistance (RH) of 99%, NRC Upto 0.5, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class0/Class1 (BS476 Pt:6&7) in module size of 600 X 600 X 16 mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 63%.<br>The grid should be of approved make with 15mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 23.78 Kgs/M2. The T Sections should have a Galvanizing of 120 grams per M2 & passed through 500 hrs of Salt test.The Tile & Grid system used together should carry a 15 year warrantee,including 75 mm thk glas wool panels for heat & sound insulations to placed above the tiles .<br>INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using approved suspension system
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lipsof 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board
Supply and fixing frosted flim for door and glass partition
PELMET:Providing & fixing in position PELMET made in 19 mm thick plywood & finished with white laminate on the exposed surfaces only , supported from ceiling with MS / Wodden support , including scaffolding. with necessary labour, hardware, cleaning, placing in position. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer /Architects.
Providing & fixing in position roller blinds of approved make, color, shade of varying length, approved blackout fabric with aluminum extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings and fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. All the materials shall be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer.
Supply & fixing of ,Push and Pull made up of 1mm thick stainless steel (Grade 304) and matter duly etched of size: 1.25 " x 5"
Supply & fixing of ,Ladies and Gents signage made up of 1mm thick stainless steel (Grade 304) and matter duly etched of size 6”x6”
FURNITURE WORKS
L' TYPE WORKSTATION<br>1500/1200*525*1200MM HT<br>PARTITION : 60mm Thick Main & Return Spine is Considered.<br>Panel Based framework in Aluminium of height 1200mm or Above & the Table Top bottom panels are made of prelaminated boards & above table top panels will be fabric board on partition ,with wire management at the data & power below the table top as per detailed dwg.<br>Inside and Out Side E1 grade pre-Laminated Tiles is Considered. <br>On Main Spine: Raceway is considered for provision of Electrical, Data & voice sockets. <br>Return Spine: 60mm thick 1200mm ht. <br>TABLE TOP is made of 25mm Thick E1 Grade Pre-Laminated Particle Board with PVC Edge Banding, <br>UNDERSTRUCTURE: MS Unique Leg Trapezoidal cross section of size 60mm x 50mm x 20mm is made of 1.6mm thick CRCA Powder Coated.Horizontal Beams Below Table Top will be with 50mm x 25mm Rectangular Tube made of 1.6mm thick CRCA Powder coated. <br>Flip Cover Considered
LINEAR WORKSTATION<br>1200*600*1200MM HT<br>PARTITION : 60mm Thick Main & Return Spine is Considered.<br>Panel Based framework in Aluminium of height 1200mm or Above & the Table Top bottom panels are made of prelaminated boards & above table top panels will be fabric board on partition ,with wire management at the data & power below the table top as per detailed dwg.<br>Inside and Out Side E1 grade pre-Laminated Tiles is Considered. <br>On Main Spine: Raceway is considered for provision of Electrical, Data & voice sockets. <br>Return Spine: 60mm thick 1200mm ht. <br>TABLE TOP is made of 25mm Thick E1 Grade Pre-Laminated Particle Board with PVC Edge Banding, <br>UNDERSTRUCTURE: MS Unique Leg Trapezoidal cross section of size 60mm x 50mm x 20mm is made of 1.6mm thick CRCA Powder Coated.Horizontal Beams Below Table Top will be with 50mm x 25mm Rectangular Tube made of 1.6mm thick CRCA Powder coated. <br>Flip Cover Considered
CABIN MAIN TABLE - 1900*675*750MM HT.<br>RETURN TABLE - 1050*525*750MM HT &<br>BACK STORAGE - 2650*375*750MM HT<br>TABLE TOP is made of 25mm Thick E1 Grade Pre- Laminated Particle Board with PVC Edge Banding, <br>UNDERSTRUCTURE: MS Unique Leg Trapezoidal cross section of size 60mm x 50mm x 20mm is made of 1.6mm thick CRCA Powder Coated.Horizontal Beams Below Table Top will be with 50mm x 25mm Rectangular Tube made of 1.6mm thick CRCA Powder coated. <br>Flip Cover Considered.
Low Height sorages 1200x400x1200ht
Supply of pedestals of size 450 mm x 450 mm for L type workstations
Medium Back, Mesh Back with Adjustable Lumbar Support , Adjustable PP Arm Padded Armrest,Single lock Synchro, Height Adjustable Gaslift, Five Prong Nylon Base with Twin Wheel Castors FOR WORKSTATIONS (L type & Linear)
High Back, Mesh Back with Adjustable Lumbar Support , Adjustable PP Arm Padded Armrest,Single lock Synchro,Foam Seat PP shell Inner and Outer, Height Adjustable Gaslift, Five Prong Nylon Base with Twin Wheel Castors FOR CABIN & DGM
Supply of Visitor chairs inside DGM & cabin rooms
ELECTRICAL WORKS
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required1 or 2 module (75mmX75mm)
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A
Installation of exhaust fan in the existing opening, including making good the damage connection testing, commissioning etc. as required.Upto 450 mm sweep
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door
Supplying and fixing 5 amps to 32 amps rating, 240/415 Volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 62.5 mm depth X 2.0 mm thickness
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kVgrade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 4 X 25 sq. mm (28mm)
Supply, Installation, Testing and Commisioining of 2ft x 2ft ceiling mounted type 36W LED Panel light fixtures with all supporting accessories as required as per the site condition .
Supply, Installation, Testing and Commisioining of Sudpended mount 12W LED down Panel light fixtures with all supporting accessories as required as per the site condition
Supply, Installation, Testing and Commisioining of Sudpended mount 25W LED Patti type light fixtures with all supporting accessories
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 4C x 25 sq.mm
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor power cable confirming to IS 7098 (part 1) ammended upto date. 3C x 4 sq.mm
Supply, Fixing of Aluminium Raceways Trunking Channel of 1.6 / 1.8/2mm thick with proper interconnecting Coupling with civil related works like floor cutting, plastering Clamps and all associated accessories as required as per site conditions. (Earthing must be 3 metres within 2.5sqmm copper wire) 100 x 45 mm Aluminium Channel
Supply and Installation of Powder coated MS Junction boxes of following sizes with all associated accessories as required as per the site condition and proper supporting required centre of the Junction Boxes. The Junction to be covered all other sides, excluding the entry side and thickness of the junction box top cover must be 2mm to 3mm. Floor mounted.150 x 150 x 50mm
NETWORKING WORKS
SITC of Cat 6 SL Series Patch cord - 2 Mtr - Yellow , LSZH
SITC of 2-port British Style Shuttered faceplate, WHITE
SITC of CS37Z3, ETL Verified Category 6 U/UTP Cable, low smoke zero halogen, Gray jacket, 4 pair count
SITC of Cat 6 24-port , Modular Jack Panel, 1U
SITC of 48 port Switch for LAN
HVAC WORKS
Dismantling & Reinstallation of existing DX units as per the changes in interior design, Including all necessary supports for indoor & Outdoor units, gas topup, Any other necessary accessories required. Hiwall 1.5 Tr (Including 3 mtrs cable & copper piping)
Dismantling & Reinstallation of existing DX units as per the changes in interior design, Including all necessary supports for indoor & Outdoor units, gas topup, Any other necessary accessories required. Cassette Unit
Supply, installation, testing and commissioning of Air Cooled High Wall mounted Split Air Conditioner of following capacity consisting of high wall mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of enegy efficient suitable rotary compressor for operation on single phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation and fixing of room (fan coil) unit on wall, standard 4 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1" dia drain PVC pipe with insulation 4m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigarant gas, suitable stabilizer etc complete as required. 1 TR 5 star rated
Supply, installation, testing and commissioning of suitable hard/soft drawn copper refrigerant piping for above machines with 13 mm nitrile rubber insulation interconnecting the condensing unit to evaporating unit as per site condition.The piping measurment should be given for above 3 meter for each unit. Upto 3 meters piping should be included in the equipment / unit price
Supply, installation, testing and commissioning, Transmission/Communication cabling, of suitable size non polar shielded cable for interconnecting the Indoor and Outdoor Units / Unit to isolator of all the Units for proper performance. The cable measurment should be given for above 3 meter cabling for each unit. Upto 3 meters cabling should be included in the equipment / unit price
Supply, installation, testing and commissioning of drain piping of hard PVC pipe and fittings, insulated with 12 mm thick nitrile rubber. 25mm
Supply, installation, testing and commissioning of drain piping of hard PVC pipe and fittings, insulated with 12 mm thick nitrile rubber. 32 mm
CIS GLOBAL INFRATECH PRIVATE LIMITED
METAFAB TECHNOLOGIES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .